From c649e3c91cdc96a86ca2665fcfafaca5c4b384b1 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 1 May 2016 11:36:02 -0600 Subject: [PATCH] dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI This option currently enables both the command and the SCSI functionality. Rename the existing option to CONFIG_SCSI since most of the code relates to the feature. Signed-off-by: Simon Glass --- README | 4 ++-- api/api_storage.c | 2 +- arch/arm/include/asm/arch-ls102xa/config.h | 2 +- board/mpl/pip405/README | 6 +++--- cmd/Makefile | 4 ++-- cmd/disk.c | 2 +- common/board_r.c | 4 ++-- disk/part.c | 2 +- drivers/block/sym53c8xx.c | 2 +- fs/fat/fat.c | 2 +- include/config_cmd_all.h | 2 +- include/config_distro_bootcmd.h | 6 +++--- include/config_fallbacks.h | 2 +- include/configs/MPC8544DS.h | 2 +- include/configs/MPC8572DS.h | 2 +- include/configs/MPC8610HPCD.h | 2 +- include/configs/MPC8641HPCN.h | 2 +- include/configs/PIP405.h | 2 +- include/configs/am57xx_evm.h | 2 +- include/configs/cm_t54.h | 2 +- include/configs/db-88f6820-gp.h | 2 +- include/configs/dra7xx_evm.h | 2 +- include/configs/efi-x86.h | 2 +- include/configs/galileo.h | 2 +- include/configs/highbank.h | 2 +- include/configs/ls1043aqds.h | 2 +- include/configs/ls2080aqds.h | 2 +- include/configs/ls2080ardb.h | 2 +- include/configs/omap5_uevm.h | 2 +- include/configs/qemu-x86.h | 2 +- include/configs/sunxi-common.h | 2 +- include/configs/x86-common.h | 2 +- include/configs/xilinx_zynqmp.h | 2 +- 33 files changed, 40 insertions(+), 40 deletions(-) diff --git a/README b/README index 88ff837d7c..33dc788474 100644 --- a/README +++ b/README @@ -1066,7 +1066,7 @@ The following options need to be configured: CONFIG_CMD_RUN run command in env variable CONFIG_CMD_SANDBOX * sb command to access sandbox features CONFIG_CMD_SAVES * save S record dump - CONFIG_CMD_SCSI * SCSI Support + CONFIG_SCSI * SCSI Support CONFIG_CMD_SDRAM * print SDRAM configuration information (requires CONFIG_CMD_I2C) CONFIG_CMD_SETGETDCR Support for DCR Register access @@ -1254,7 +1254,7 @@ The following options need to be configured: CONFIG_MTD_PARTITIONS Memory Technology Device partition table. If IDE or SCSI support is enabled (CONFIG_CMD_IDE or - CONFIG_CMD_SCSI) you must configure support for at + CONFIG_SCSI) you must configure support for at least one non-MTD partition type as well. - IDE Reset method: diff --git a/api/api_storage.c b/api/api_storage.c index 8c30c56e49..d425a9ad1d 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -67,7 +67,7 @@ void dev_stor_init(void) specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA; specs[ENUM_SATA].name = "sata"; #endif -#if defined(CONFIG_CMD_SCSI) +#if defined(CONFIG_SCSI) specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE; specs[ENUM_SCSI].enum_started = 0; specs[ENUM_SCSI].enum_ended = 0; diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 267bd17727..d77c04a86a 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -82,7 +82,7 @@ /* SATA */ #define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000) #define CONFIG_BOARD_LATE_INIT -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/board/mpl/pip405/README b/board/mpl/pip405/README index e900c56f15..f039817b79 100644 --- a/board/mpl/pip405/README +++ b/board/mpl/pip405/README @@ -32,8 +32,8 @@ Changed files: - include/cmd_bsp.h added PIP405 commands definitions - include/cmd_condefs.h added Floppy and SCSI support - include/cmd_disk.h changed to work with block device description -- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI -- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI +- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_SCSI +- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_SCSI - include/flash.h added INTEL_ID_28F320C3T 0x88C488C4 - include/i2c.h added "defined(CONFIG_PIP405)" - include/image.h added IH_OS_U_BOOT, IH_TYPE_FIRMWARE @@ -86,7 +86,7 @@ section "Changes". New Commands: ------------- -CONFIG_CMD_SCSI SCSI Support +CONFIG_SCSI SCSI Support CONFIG_CMF_FDC Floppy disk support IDE additions: diff --git a/cmd/Makefile b/cmd/Makefile index f95759e670..6612a3b2b5 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -112,7 +112,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o obj-$(CONFIG_SANDBOX) += host.o obj-$(CONFIG_CMD_SATA) += sata.o obj-$(CONFIG_CMD_SF) += sf.o -obj-$(CONFIG_CMD_SCSI) += scsi.o +obj-$(CONFIG_SCSI) += scsi.o obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o obj-$(CONFIG_CMD_SETEXPR) += setexpr.o obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o @@ -157,7 +157,7 @@ endif # !CONFIG_SPL_BUILD ifdef CONFIG_SPL_BUILD ifdef CONFIG_SPL_SATA_SUPPORT -obj-$(CONFIG_CMD_SCSI) += scsi.o +obj-$(CONFIG_SCSI) += scsi.o endif endif # CONFIG_SPL_BUILD diff --git a/cmd/disk.c b/cmd/disk.c index 2fd1717e6a..fcc4123127 100644 --- a/cmd/disk.c +++ b/cmd/disk.c @@ -8,7 +8,7 @@ #include #include -#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_SCSI) || \ +#if defined(CONFIG_CMD_IDE) || defined(CONFIG_SCSI) || \ defined(CONFIG_USB_STORAGE) int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, char *const argv[]) diff --git a/common/board_r.c b/common/board_r.c index ad02549311..d959ad3c6f 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -620,7 +620,7 @@ static int initr_ambapp_print(void) } #endif -#if defined(CONFIG_CMD_SCSI) +#if defined(CONFIG_SCSI) static int initr_scsi(void) { puts("SCSI: "); @@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = { initr_ambapp_print, #endif #endif -#ifdef CONFIG_CMD_SCSI +#ifdef CONFIG_SCSI INIT_FUNC_WATCHDOG_RESET initr_scsi, #endif diff --git a/disk/part.c b/disk/part.c index 543cab8103..2613bff22c 100644 --- a/disk/part.c +++ b/disk/part.c @@ -28,7 +28,7 @@ const struct block_drvr block_drvr[] = { #if defined(CONFIG_CMD_SATA) {.name = "sata", .get_dev = sata_get_dev, }, #endif -#if defined(CONFIG_CMD_SCSI) +#if defined(CONFIG_SCSI) { .name = "scsi", .get_dev = scsi_get_dev, }, #endif #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index c7c40affae..5daede7279 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -33,7 +33,7 @@ #define PRINTF(fmt,args...) #endif -#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) +#if defined(CONFIG_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) #undef SCSI_SINGLE_STEP /* diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 600a90e309..826bd85286 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -1254,7 +1254,7 @@ int file_fat_detectfs(void) #if defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ + defined(CONFIG_SCSI) || \ defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) printf("Interface: "); diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index ed502a191f..b5fd6c68e8 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -45,7 +45,7 @@ #define CONFIG_CMD_READ /* Read data from partition */ #define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ #define CONFIG_CMD_SAVES /* save S record dump */ -#define CONFIG_CMD_SCSI /* SCSI Support */ +#define CONFIG_SCSI /* SCSI Support */ #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ #define CONFIG_CMD_UBI /* UBI Support */ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 7f673448c9..5a8d7f2708 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -165,7 +165,7 @@ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA #endif -#ifdef CONFIG_CMD_SCSI +#ifdef CONFIG_SCSI #define BOOTENV_RUN_SCSI_INIT "run scsi_init; " #define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " #define BOOTENV_SHARED_SCSI \ @@ -185,9 +185,9 @@ #define BOOTENV_SET_SCSI_NEED_INIT #define BOOTENV_SHARED_SCSI #define BOOTENV_DEV_SCSI \ - BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI + BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI #define BOOTENV_DEV_NAME_SCSI \ - BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI + BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI #endif #ifdef CONFIG_CMD_IDE diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 2666191866..2ad54b7bf6 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -45,7 +45,7 @@ /* Rather than repeat this expression each time, add a define for it */ #if defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ + defined(CONFIG_SCSI) || \ defined(CONFIG_CMD_USB) || \ defined(CONFIG_CMD_PART) || \ defined(CONFIG_CMD_GPT) || \ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 26d92daff1..f3036c1dc2 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -373,7 +373,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI - #define CONFIG_CMD_SCSI + #define CONFIG_SCSI #endif /* diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 8c4e5e21ca..bb7f38e34a 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -576,7 +576,7 @@ #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #endif /* diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index e7f01d00d1..f6d45a9e40 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -449,7 +449,7 @@ #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #endif #define CONFIG_WATCHDOG /* watchdog enabled */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 5e23007d8d..9b2623c726 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -610,7 +610,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI - #define CONFIG_CMD_SCSI + #define CONFIG_SCSI #endif #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 4bd06a45bf..4506d86eee 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -43,7 +43,7 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_REGINFO #define CONFIG_CMD_FDC -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_CMD_DATE #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SAVES diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 32d7d4d0bd..d53b0fdd89 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -75,7 +75,7 @@ /* SATA */ #define CONFIG_BOARD_LATE_INIT -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 9b13aa6b5a..ac6103c066 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -60,7 +60,7 @@ #define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index d84dde39c1..3539a62790 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -27,7 +27,7 @@ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_CMD_ENV #define CONFIG_CMD_PCI -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 79b6c09951..8a0cd66cd0 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -230,7 +230,7 @@ /* SATA */ #define CONFIG_BOARD_LATE_INIT -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/efi-x86.h b/include/configs/efi-x86.h index 6dd0b32dae..95e46c558d 100644 --- a/include/configs/efi-x86.h +++ b/include/configs/efi-x86.h @@ -18,7 +18,7 @@ #undef CONFIG_VIDEO #undef CONFIG_CFB_CONSOLE #undef CONFIG_SCSI_AHCI -#undef CONFIG_CMD_SCSI +#undef CONFIG_SCSI #undef CONFIG_INTEL_ICH6_GPIO #undef CONFIG_USB_EHCI_PCI diff --git a/include/configs/galileo.h b/include/configs/galileo.h index 2f1f6d4455..40f7fba833 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -29,7 +29,7 @@ /* SATA is not supported in Quark SoC */ #undef CONFIG_SCSI_AHCI -#undef CONFIG_CMD_SCSI +#undef CONFIG_SCSI /* Video is not supported in Quark SoC */ #undef CONFIG_VIDEO diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 3bce12bbb8..5cefddc2e0 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -51,7 +51,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index d71a229c61..af1f73dbaa 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -108,7 +108,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_DOS_PARTITION #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 2d7567f394..f8c9e51ae7 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -44,7 +44,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_DOS_PARTITION #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 5bec5099af..4577919ca1 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -62,7 +62,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_DOS_PARTITION #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 86cefa3b8f..4ddc492112 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -115,7 +115,7 @@ /* Max time to hold reset on this board, see doc/README.omap-reset-time */ #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index b0d2ffe5b4..476d37d4bc 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -43,7 +43,7 @@ #define CONFIG_ATAPI #undef CONFIG_SCSI_AHCI -#undef CONFIG_CMD_SCSI +#undef CONFIG_SCSI #else #define CONFIG_SCSI_DEV_LIST \ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI} diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 2406115e3e..ac2d93114b 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -125,7 +125,7 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #endif #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index a2822e0114..b79f47baf3 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -100,7 +100,7 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_PCI #define CONFIG_CMD_GETTIME -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #define CONFIG_CMD_ZBOOT diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 060bca985e..6b8e3ea865 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -201,7 +201,7 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_CMD_SCSI +#define CONFIG_SCSI #endif #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)