leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mpc83xx: Update 83xx to use fsl_i2c.c

Browse Source 
Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
Added multiple I2C bus support to fsl_i2c.c.

Signed-off-by: Timur Tabi <timur@freescale.com>
This commit is contained in:
Timur Tabi
2006-11-03 19:15:00 -06:00
committed by Kim Phillips
parent d239d74b1c
commit be5e61815d
15 changed files with 159 additions and 616 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
cpu/mpc83xx/Makefile
View File

@@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a
START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
i2c.o spd_sdram.o qe_io.o
spd_sdram.o qe_io.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))

4
cpu/mpc83xx/cpu.c
View File

@@ -111,7 +111,7 @@ int checkcpu(void)
}
/**
/*
* Program a UPM with the code supplied in the table.
*
* The 'dummy' variable is used to increment the MAD. 'dummy' is
@@ -137,7 +137,7 @@ int checkcpu(void)
* upm: 0=UPMA, 1=UPMB, 2=UPMC
* table: Pointer to an array of values to program
* size: Number of elements in the array. Must be 64 or less.
*/
*/
void upmconfig (uint upm, uint *table, uint size)
{
#if defined(CONFIG_MPC834X)

423
cpu/mpc83xx/i2c.c
View File

@@ -1,423 +0,0 @@
/*
* (C) Copyright 2006 Freescale Semiconductor, Inc.
*
* (C) Copyright 2003,Motorola Inc.
* Xianghua Xiao <x.xiao@motorola.com>
* Adapted for Motorola 85xx chip.
*
* (C) Copyright 2003
* Gleb Natapov <gnatapov@mrv.com>
* Some bits are taken from linux driver writen by adrian@humboldt.co.uk
*
* Hardware I2C driver for MPC107 PCI bridge.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Change log:
*
* 20050101: Eran Liberty (liberty@freescale.com)
* Initial file creating (porting from 85XX & 8260)
* 20060601: Dave Liu (daveliu@freescale.com)
* Unified variable names for mpc83xx
*/
#include <common.h>
#include <command.h>
#include <asm/io.h>
#ifdef CONFIG_HARD_I2C
#include <i2c.h>
#include <asm/i2c.h>
DECLARE_GLOBAL_DATA_PTR;
/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
* Default is bus 1. This is necessary because the DDR initialization
* runs from ROM, and we can't switch buses because we can't modify
* the i2c_dev variable. Everything gets straightened out once i2c_init
* is called from RAM. */
#ifndef CFG_SPD_BUS_NUM
#define CFG_SPD_BUS_NUM 1
#endif
static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM;
#if CFG_SPD_BUS_NUM == 1
static volatile i2c_t *i2c_dev = I2C_1;
#else
static volatile i2c_t *i2c_dev = I2C_2;
#endif
static int i2c_bus_speed[2] = {0, 0};
/*
* Map the frequency divider to the FDR. This data is taken from table 17-5
* of the MPC8349EA reference manual, with duplicates removed.
*/
static struct {
unsigned int divider;
u8 fdr;
} i2c_speed_map[] =
{
{0, 0x20},
{256, 0x20},
{288, 0x21},
{320, 0x22},
{352, 0x23},
{384, 0x24},
{416, 0x01},
{448, 0x25},
{480, 0x02},
{512, 0x26},
{576, 0x27},
{640, 0x28},
{704, 0x05},
{768, 0x29},
{832, 0x06},
{896, 0x2A},
{1024, 0x2B},
{1152, 0x08},
{1280, 0x2C},
{1536, 0x2D},
{1792, 0x2E},
{1920, 0x0B},
{2048, 0x2F},
{2304, 0x0C},
{2560, 0x30},
{3072, 0x31},
{3584, 0x32},
{3840, 0x0F},
{4096, 0x33},
{4608, 0x10},
{5120, 0x34},
{6144, 0x35},
{7168, 0x36},
{7680, 0x13},
{8192, 0x37},
{9216, 0x14},
{10240, 0x38},
{12288, 0x39},
{14336, 0x3A},
{15360, 0x17},
{16384, 0x3B},
{18432, 0x18},
{20480, 0x3C},
{24576, 0x3D},
{28672, 0x3E},
{30720, 0x1B},
{32768, 0x3F},
{36864, 0x1C},
{40960, 0x1D},
{49152, 0x1E},
{61440, 0x1F},
{-1, 0x1F}
};
#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0]))
static int set_speed(unsigned int speed)
{
unsigned long i2c_clk;
unsigned int divider, i;
u8 fdr = 0x3F;
i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk;
divider = i2c_clk / speed;
/* Scan i2c_speed_map[] for the closest matching divider.*/
for (i = 0; i < NUM_I2C_SPEEDS-1; i++) {
/* Locate our divider in between two entries in i2c_speed_map[] */
if ((divider >= i2c_speed_map[i].divider) &&
(divider <= i2c_speed_map[i+1].divider)) {
/* Which one is closer? */
if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) {
fdr = i2c_speed_map[i].fdr;
} else {
fdr = i2c_speed_map[i+1].fdr;
}
break;
}
}
writeb(fdr, &i2c_dev->fdr);
i2c_bus_speed[i2c_bus_num - 1] = speed;
return 0;
}
static void _i2c_init(int speed, int slaveadd)
{
/* stop I2C controller */
writeb(0x00 , &i2c_dev->cr);
/* set clock */
set_speed(speed);
/* set default filter */
writeb(IC2_FDR,&i2c_dev->dfsrr);
/* write slave address */
writeb(slaveadd, &i2c_dev->adr);
/* clear status register */
writeb(I2C_CR_MTX, &i2c_dev->sr);
/* start I2C controller */
writeb(I2C_CR_MEN, &i2c_dev->cr);
}
void i2c_init(int speed, int slaveadd)
{
/* Set both interfaces to the same speed and slave address */
/* Note: This function gets called twice - before and after
* relocation to RAM. The first time it's called, we are unable
* to change buses, so whichever one 'i2c_dev' was initialized to
* gets set twice. When run from RAM both buses get set properly */
i2c_set_bus_num(1);
_i2c_init(speed, slaveadd);
#ifdef CFG_I2C2_OFFSET
i2c_set_bus_num(2);
_i2c_init(speed, slaveadd);
i2c_set_bus_num(1);
#endif /* CFG_I2C2_OFFSET */
}
static __inline__ int
i2c_wait4bus (void)
{
ulong timeval = get_timer (0);
while (readb(&i2c_dev->sr) & I2C_SR_MBB) {
if (get_timer (timeval) > I2C_TIMEOUT) {
return -1;
}
}
return 0;
}
static __inline__ int
i2c_wait (int write)
{
u32 csr;
ulong timeval = get_timer(0);
do {
csr = readb(&i2c_dev->sr);
if (!(csr & I2C_SR_MIF))
continue;
writeb(0x0, &i2c_dev->sr);
if (csr & I2C_SR_MAL) {
debug("i2c_wait: MAL\n");
return -1;
}
if (!(csr & I2C_SR_MCF)) {
debug("i2c_wait: unfinished\n");
return -1;
}
if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
debug("i2c_wait: No RXACK\n");
return -1;
}
return 0;
} while (get_timer (timeval) < I2C_TIMEOUT);
debug("i2c_wait: timed out\n");
return -1;
}
static __inline__ int
i2c_write_addr (u8 dev, u8 dir, int rsta)
{
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
(rsta?I2C_CR_RSTA:0),
&i2c_dev->cr);
writeb((dev << 1) | dir, &i2c_dev->dr);
if (i2c_wait (I2C_WRITE) < 0)
return 0;
return 1;
}
static __inline__ int
__i2c_write (u8 *data, int length)
{
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
&i2c_dev->cr);
for (i=0; i < length; i++) {
writeb(data[i], &i2c_dev->dr);
if (i2c_wait (I2C_WRITE) < 0)
break;
}
return i;
}
static __inline__ int
__i2c_read (u8 *data, int length)
{
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA |
((length == 1) ? I2C_CR_TXAK : 0),
&i2c_dev->cr);
/* dummy read */
readb(&i2c_dev->dr);
for (i=0; i < length; i++) {
if (i2c_wait (I2C_READ) < 0)
break;
/* Generate ack on last next to last byte */
if (i == length - 2)
writeb(I2C_CR_MEN | I2C_CR_MSTA |
I2C_CR_TXAK,
&i2c_dev->cr);
/* Generate stop on last byte */
if (i == length - 1)
writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev->cr);
data[i] = readb(&i2c_dev->dr);
}
return i;
}
int
i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
{
int i = 0;
u8 *a = (u8*)&addr;
if (i2c_wait4bus () < 0)
goto exit;
if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
goto exit;
if (__i2c_write (&a[4 - alen], alen) != alen)
goto exit;
if (i2c_write_addr (dev, I2C_READ, 1) == 0)
goto exit;
i = __i2c_read (data, length);
exit:
writeb(I2C_CR_MEN, &i2c_dev->cr);
return !(i == length);
}
int
i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
{
int i = 0;
u8 *a = (u8*)&addr;
if (i2c_wait4bus () < 0)
goto exit;
if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
goto exit;
if (__i2c_write (&a[4 - alen], alen) != alen)
goto exit;
i = __i2c_write (data, length);
exit:
writeb(I2C_CR_MEN, &i2c_dev->cr);
return !(i == length);
}
int i2c_probe (uchar chip)
{
int tmp;
/*
* Try to read the first location of the chip. The underlying
* driver doesn't appear to support sending just the chip address
* and looking for an <ACK> back.
*/
udelay(10000);
return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
}
uchar i2c_reg_read (uchar i2c_addr, uchar reg)
{
uchar buf[1];
i2c_read (i2c_addr, reg, 1, buf, 1);
return (buf[0]);
}
void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
{
i2c_write (i2c_addr, reg, 1, &val, 1);
}
int i2c_set_bus_num(unsigned int bus)
{
if(bus == 1)
{
i2c_dev = I2C_1;
}
#ifdef CFG_I2C2_OFFSET
else if(bus == 2)
{
i2c_dev = I2C_2;
}
#endif
else
{
return -1;
}
i2c_bus_num = bus;
return 0;
}
int i2c_set_bus_speed(unsigned int speed)
{
return set_speed(speed);
}
unsigned int i2c_get_bus_num(void)
{
return i2c_bus_num;
}
unsigned int i2c_get_bus_speed(void)
{
return i2c_bus_speed[i2c_bus_num - 1];
}
#endif /* CONFIG_HARD_I2C */