leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: k2g: Add pinmux support for K2G ICE evm

Browse Source 
Add basic pinmux data for new K2G ICE evm. Also add pinmuxing for a
generic K2G evm which includes I2C 0 and 1 used for board detection
purposes.

Since multiple K2G boards are supported that means initially generic
pinmuxing should be used when board detection hasn't ran. Once board
detection runs the proper pinmuxing can be reran to match the board
being ran on.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Cooper Jr., Franklin 2017-06-16 17:25:23 -05:00 committed by Tom Rini
parent e6e2435f39
commit b9b342eaec
2 changed files with 46 additions and 1 deletions
board/ti/ks2_evm
board_k2g.cmux-k2g.h

2
board/ti/ks2_evm/board_k2g.c
View File

@ -274,6 +274,8 @@ int embedded_dtb_select(void)
fdtdec_setup();
k2g_mux_config();
k2g_reset_mux_config();
/* deassert FLASH_HOLD */

45
board/ti/ks2_evm/mux-k2g.h
View File

@ -11,6 +11,22 @@
#include <asm/io.h>
#include <asm/arch/mux-k2g.h>
#include <asm/arch/hardware.h>
#include "board.h"
struct pin_cfg k2g_generic_pin_cfg[] = {
/* UART0 */
{ 115, MODE(0) }, /* SOC_UART0_RXD */
{ 116, MODE(0) }, /* SOC_UART0_TXD */
/* I2C 0 */
{ 223, MODE(0) }, /* SOC_I2C0_SCL */
{ 224, MODE(0) }, /* SOC_I2C0_SDA */
/* I2C 1 */
{ 225, MODE(0) }, /* SOC_I2C1_SCL */
{ 226, MODE(0) }, /* SOC_I2C1_SDA */
{ MAX_PIN_N, }
};
struct pin_cfg k2g_evm_pin_cfg[] = {
/* GPMC */
@ -307,7 +323,34 @@ struct pin_cfg k2g_evm_pin_cfg[] = {
{ MAX_PIN_N, }
};
struct pin_cfg k2g_ice_evm_pin_cfg[] = {
/* MMC 1 */
{ 63, MODE(0) | PIN_PTD }, /* MMC1_DAT3.MMC1_DAT3 */
{ 64, MODE(0) | PIN_PTU }, /* MMC1_DAT2.MMC1_DAT2 */
{ 65, MODE(0) | PIN_PTU }, /* MMC1_DAT1.MMC1_DAT1 */
{ 66, MODE(0) | PIN_PTD }, /* MMC1_DAT0.MMC1_DAT0 */
{ 67, MODE(0) | PIN_PTD }, /* MMC1_CLK.MMC1_CLK */
{ 68, MODE(0) | PIN_PTD }, /* MMC1_CMD.MMC1_CMD */
{ 69, MODE(3) | PIN_PTU }, /* MMC1_SDCD.GPIO0_69 */
{ 70, MODE(0) | PIN_PTU }, /* MMC1_SDWP.MMC1_SDWP */
{ 71, MODE(0) | PIN_PTD }, /* MMC1_POW.MMC1_POW */
/* I2C 0 */
{ 223, MODE(0) }, /* SOC_I2C0_SCL */
{ 224, MODE(0) }, /* SOC_I2C0_SDA */
{ MAX_PIN_N, }
};
void k2g_mux_config(void)
{
configure_pin_mux(k2g_evm_pin_cfg);
if (!board_ti_was_eeprom_read()) {
configure_pin_mux(k2g_generic_pin_cfg);
} else if (board_is_k2g_gp()) {
configure_pin_mux(k2g_evm_pin_cfg);
} else if (board_is_k2g_ice()) {
configure_pin_mux(k2g_ice_evm_pin_cfg);
} else {
puts("Unknown board, cannot configure pinmux.");
hang();
}
}