arm: add (default) config for nanopi2 board
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
This commit is contained in:
Stefan Bosch
Tom Rini
parent
d1611086e0
commit
b39cacc268
17
MAINTAINERS
17
MAINTAINERS
@ -280,6 +280,23 @@ F: arch/arm/mach-at91/
|
||||
F: board/atmel/
|
||||
F: drivers/misc/microchip_flexcom.c
|
||||
|
||||
ARM NEXELL S5P4418
|
||||
M: Stefan Bosch <stefan_b@posteo.net>
|
||||
S: Maintained
|
||||
F: arch/arm/cpu/armv7/s5p4418/
|
||||
F: arch/arm/dts/s5p4418*
|
||||
F: arch/arm/mach-nexell/
|
||||
F: board/friendlyarm/
|
||||
F: configs/s5p4418_nanopi2_defconfig
|
||||
F: doc/README.s5p4418
|
||||
F: drivers/gpio/nx_gpio.c
|
||||
F: drivers/i2c/nx_i2c.c
|
||||
F: drivers/mmc/nexell_dw_mmc_dm.c
|
||||
F: drivers/pinctrl/nexell/
|
||||
F: drivers/video/nexell/
|
||||
F: drivers/video/nexell_display.c
|
||||
F: include/configs/s5p4418_nanopi2.h
|
||||
|
||||
ARM OWL
|
||||
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
S: Maintained
|
||||
|
||||
147
configs/s5p4418_nanopi2_defconfig
Normal file
147
configs/s5p4418_nanopi2_defconfig
Normal file
@ -0,0 +1,147 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_NEXELL=y
|
||||
CONFIG_ARCH_S5P4418=y
|
||||
CONFIG_TARGET_NANOPI2=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="s5p4418-nanopi2"
|
||||
CONFIG_FIT=y
|
||||
|
||||
CONFIG_SYS_MEMTEST_START=0x71000000
|
||||
CONFIG_SYS_MEMTEST_END=0xb0000000
|
||||
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
# CONFIG_CMD_NET is not set
|
||||
|
||||
# Default is CONFIG_NET=y, in this case:
|
||||
# Loading Environment from MMC... ## Warning: Unknown environment variable type 'm'
|
||||
# OK
|
||||
# CONFIG_CMD_NET=y must be set to avoid this Warning. But then:
|
||||
# Net: Net Initialization Skipped
|
||||
# No ethernet found.
|
||||
# If CONFIG_NET=n is set additionally warning at "make s5p4418_nanopi2_defconfig":
|
||||
# arch/../configs/s5p4418_nanopi2_defconfig:24:warning: override: reassigning to symbol CMD_NET
|
||||
#
|
||||
# --> CONFIG_NET=n set only
|
||||
CONFIG_NET=n
|
||||
|
||||
# CONFIG_CMD_NFS is not set
|
||||
CONFIG_CMD_FDISK=y
|
||||
CONFIG_CMD_EXT4_IMG_WRITE=y
|
||||
CONFIG_CMD_SD_RECOVERY=y
|
||||
CONFIG_CMD_PMIC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_NEXELL=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_DM_PMIC_AXP228=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_AXP228=y
|
||||
CONFIG_DM_PWM=n
|
||||
|
||||
CONFIG_DISPLAY=y
|
||||
CONFIG_DM_VIDEO=y
|
||||
CONFIG_SYS_CONSOLE_BG_COL=0xff
|
||||
CONFIG_SYS_CONSOLE_FG_COL=0x00
|
||||
CONFIG_VIDEO_NX=y
|
||||
CONFIG_VIDEO_NX_RGB=y
|
||||
CONFIG_VIDEO_NX_LVDS=y
|
||||
CONFIG_VIDEO_NX_HDMI=y
|
||||
CONFIG_CMD_BMP=y
|
||||
|
||||
## LCD backlight control
|
||||
CONFIG_S5P4418_ONEWIRE=y
|
||||
CONFIG_PWM_NX is not set
|
||||
|
||||
CONFIG_REGEX=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
|
||||
CONFIG_SYS_TEXT_BASE=0x74C00000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_SYS_CACHELINE_SIZE=64
|
||||
|
||||
## System initialize options (board_init_f)
|
||||
# board_init_f->init_sequence, call board_early_init_f
|
||||
CONFIG_BOARD_LATE_INIT=y
|
||||
# board_init_f->init_sequence, call print_cpuinfo
|
||||
CONFIG_DISPLAY_CPUINFO=y
|
||||
# board_init_f->init_sequence, call show_board_info
|
||||
CONFIG_DISPLAY_BOARDINFO=y
|
||||
# board_init_f, CONFIG_SYS_ICACHE_OFF
|
||||
CONFIG_SYS_DCACHE_OFF=y
|
||||
# board_init_r, call arch_misc_init
|
||||
CONFIG_ARCH_MISC_INIT=y
|
||||
|
||||
CONFIG_BOOTDELAY=1
|
||||
CONFIG_ZERO_BOOTDELAY_CHECK=y
|
||||
|
||||
## U-Boot Environments
|
||||
## refer to common/env_common.c
|
||||
|
||||
# CONFIG_ENV_IS_IN_MMC must be set here and not in s5p4418_nanopi2.h
|
||||
# otherwise CONFIG_ENV_IS_NOWHERE is set by env/Kconfig and environment
|
||||
# (bootargs) are not loaded
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_ENV_OFFSET=0x2E0200
|
||||
CONFIG_ENV_SIZE=0x4000
|
||||
CONFIG_CMD_SAVEENV=y
|
||||
|
||||
## Etc Command definition
|
||||
# image info
|
||||
CONFIG_CMD_IMI=y
|
||||
# add command line history
|
||||
CONFIG_CMDLINE_EDITING=y
|
||||
CONFIG_CMDLINE_TAG=y
|
||||
CONFIG_INITRD_TAG=y
|
||||
CONFIG_SUPPORT_RAW_INITRD=y
|
||||
CONFIG_REVISION_TAG=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
|
||||
## serial console configuration
|
||||
CONFIG_CONS_INDEX=0
|
||||
CONFIG_BAUDRATE=115200
|
||||
|
||||
## SD/MMC
|
||||
CONFIG_BOUNCE_BUFFER=y
|
||||
CONFIG_GENERIC_MMC=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_NEXELL_DWMMC=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_DM_MMC=y
|
||||
|
||||
CONFIG_DOS_PARTITION=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_FS_EXT4=y
|
||||
CONFIG_EXT4_WRITE=y
|
||||
|
||||
## OF_CONTROL
|
||||
CONFIG_FIT_BEST_MATCH=y
|
||||
CONFIG_OF_LIBFDT=y
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
|
||||
## BOOTCOMMAND
|
||||
CONFIG_ROOT_DEV=1
|
||||
CONFIG_BOOT_PART=1
|
||||
CONFIG_ROOT_PART=2
|
||||
|
||||
# necessary for if-cmd
|
||||
CONFIG_HUSH_PARSER=y
|
||||
|
||||
# set to 'n' to save memory
|
||||
CONFIG_SYS_LONGHELP=y
|
||||
|
||||
# For debugging (trace) of MMC-CMDs
|
||||
CONFIG_MMC_TRACE=n
|
||||
63
doc/README.s5p4418
Normal file
63
doc/README.s5p4418
Normal file
@ -0,0 +1,63 @@
|
||||
|
||||
Summary
|
||||
=======
|
||||
|
||||
This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based
|
||||
S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2
|
||||
(and other) boards [1].
|
||||
|
||||
Currently the following boards are supported:
|
||||
|
||||
* FriendlyArm NanoPi2 [2]
|
||||
* FriendlyArm NanoPC-T2 [3]
|
||||
|
||||
|
||||
Build
|
||||
=====
|
||||
|
||||
* NanoPi2 and NanoPC-T2
|
||||
|
||||
make s5p4418_nanopi2_defconfig
|
||||
make
|
||||
|
||||
|
||||
Installation
|
||||
============
|
||||
|
||||
- Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android,
|
||||
friendlyCore and LUbuntu)
|
||||
- Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card
|
||||
- Use dd in the directory where U-Boot has been built to update U-Boot:
|
||||
(replace <SD-card> with the device used for the SD-card, e.g. sdc)
|
||||
sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card>
|
||||
- Boot the board from this SD-card
|
||||
|
||||
The source code for (the used?) LUbuntu 16.04 can be found at [5].
|
||||
|
||||
|
||||
Links
|
||||
=====
|
||||
|
||||
[1] FriendlyArm U-boot v2016.01:
|
||||
|
||||
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01
|
||||
|
||||
|
||||
[2] NanoPi2:
|
||||
|
||||
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2
|
||||
|
||||
|
||||
[3] NanoPC-T2:
|
||||
|
||||
http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2
|
||||
|
||||
|
||||
[4] FriendlyArm image files for NanoPi2:
|
||||
|
||||
http://download.friendlyarm.com//NanoPi2
|
||||
|
||||
|
||||
[5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2:
|
||||
|
||||
https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y
|
||||
257
include/configs/s5p4418_nanopi2.h
Normal file
257
include/configs/s5p4418_nanopi2.h
Normal file
@ -0,0 +1,257 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+
|
||||
*
|
||||
* Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd.
|
||||
* (http://www.friendlyarm.com)
|
||||
*
|
||||
* (C) Copyright 2016 Nexell
|
||||
* Hyejung Kwon <cjscld15@nexell.co.kr>
|
||||
*
|
||||
* Copyright (C) 2019 Stefan Bosch <stefan_b@posteo.net>
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H__
|
||||
#define __CONFIG_H__
|
||||
|
||||
#include <linux/sizes.h>
|
||||
#include <asm/arch/nexell.h>
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* System memory Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_MEM_SIZE 0x40000000
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x71000000
|
||||
|
||||
/*
|
||||
* "(CONFIG_SYS_MEM_SIZE - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in
|
||||
* u-boot nanopi2-v2016.01.
|
||||
* This is not working anymore because boot_fdt_add_mem_rsv_regions() in
|
||||
* common/image-fdt.c has been extended:
|
||||
* Also reserved-memory sections are marked as unusable.
|
||||
*
|
||||
* In friendlyArm Ubuntu 16.04 source arch/arm/boot/dts/s5p4418.dtsi:
|
||||
* reserved-memory {
|
||||
* #address-cells = <1>;
|
||||
* #size-cells = <1>;
|
||||
* ranges;
|
||||
*
|
||||
* secure_memory@b0000000 {
|
||||
* reg = <0xB0000000 0x1000000>;
|
||||
* nop-map;
|
||||
* };
|
||||
* };
|
||||
*
|
||||
* arch_lmb_reserve() of arch/arm/lib/bootm.c:
|
||||
* "Allocate space for command line and board info - ... below the current
|
||||
* stack pointer."
|
||||
* --> Memory allocated would overlap with "secure_memory@b0000000"
|
||||
* --> lmb_add_region(rgn, base==0xb0000000, size==0x1000000) fails,
|
||||
* boot output:
|
||||
* ...
|
||||
* Kernel image @ 0x71080000 [ 0x000000 - 0x60e628 ]
|
||||
* ## Flattened Device Tree blob at 7a000000
|
||||
* Booting using the fdt blob at 0x7a000000
|
||||
* ERROR: reserving fdt memory region failed (addr=b0000000 size=1000000)
|
||||
* Using Device Tree in place at 7a000000, end 7a00fbf0
|
||||
*
|
||||
* Starting kernel ...
|
||||
* ...
|
||||
*/
|
||||
#define CONFIG_SYS_SDRAM_SIZE (0xb0000000 - CONFIG_SYS_SDRAM_BASE)
|
||||
|
||||
#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
|
||||
|
||||
#define BMP_LOAD_ADDR 0x78000000
|
||||
|
||||
/* kernel load address */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x71080000
|
||||
#define INITRD_START 0x79000000
|
||||
#define KERNEL_DTB_ADDR 0x7A000000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level System Configuration
|
||||
*/
|
||||
/* Not used: not need IRQ/FIQ stuff */
|
||||
#undef CONFIG_USE_IRQ
|
||||
/* decrementer freq: 1ms ticks */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* System initialize options (board_init_f)
|
||||
*/
|
||||
/* board_init_f->init_sequence, call arch_cpu_init */
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#ifdef CONFIG_SYS_PROMPT
|
||||
#undef CONFIG_SYS_PROMPT
|
||||
/* Monitor Command Prompt */
|
||||
#define CONFIG_SYS_PROMPT "nanopi2# "
|
||||
#endif
|
||||
|
||||
/* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_CBSIZE 1024
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
/* max number of command args */
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* allow to overwrite serial and ethaddr
|
||||
*/
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#ifdef CONFIG_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Etc Command definition
|
||||
*/
|
||||
#undef CONFIG_BOOTM_NETBSD
|
||||
#undef CONFIG_BOOTM_RTEMS
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* serial console configuration
|
||||
*/
|
||||
#define CONFIG_PL011_CLOCK 50000000
|
||||
#define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \
|
||||
(void *)PHY_BASEADDR_UART1, \
|
||||
(void *)PHY_BASEADDR_UART2, \
|
||||
(void *)PHY_BASEADDR_UART3}
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PLL
|
||||
*/
|
||||
#define CONFIG_SYS_PLLFIN 24000000UL
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Timer
|
||||
*/
|
||||
#define CONFIG_TIMER_SYS_TICK_CH 0
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* BACKLIGHT
|
||||
*/
|
||||
#ifndef CONFIG_S5P4418_ONEWIRE
|
||||
#ifdef CONFIG_PWM_NX
|
||||
/* fallback to pwm */
|
||||
#define BACKLIGHT_CH 0
|
||||
#define BACKLIGHT_DIV 0
|
||||
#define BACKLIGHT_INV 0
|
||||
#define BACKLIGHT_DUTY 50
|
||||
#define BACKLIGHT_HZ 1000
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SD/MMC
|
||||
*/
|
||||
#if defined(CONFIG_MMC)
|
||||
/* eMMC = 0, SD-card = 2 */
|
||||
#define CONFIG_SYS_MMC_DEV 2
|
||||
#define CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_DEV
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Default environment organization
|
||||
*/
|
||||
#if !defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) && \
|
||||
!defined(CONFIG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_EEPROM)
|
||||
/* default: CONFIG_ENV_IS_NOWHERE */
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#define CONFIG_ENV_OFFSET 1024
|
||||
#define CONFIG_ENV_SIZE (4 * 1024) /* env size */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* VIDEO
|
||||
*/
|
||||
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
|
||||
#ifdef CONFIG_VIDEO_LOGO
|
||||
|
||||
#ifdef CONFIG_DM_VIDEO
|
||||
#define CONFIG_BMP_24BPP
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SPLASH_SCREEN
|
||||
#define CONFIG_SPLASH_SOURCE 1
|
||||
#define CONFIG_SPLASH_SCREEN_ALIGN 1
|
||||
#define SPLASH_FILE logo.bmp
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* ENV
|
||||
*/
|
||||
#define BLOADER_MMC \
|
||||
"ext4load mmc ${rootdev}:${bootpart} "
|
||||
|
||||
#ifdef CONFIG_OF_BOARD_SETUP
|
||||
#define EXTRA_ENV_DTB_RESERVE \
|
||||
"dtb_reserve=" \
|
||||
"if test -n \"$dtb_addr\"; then fdt addr $dtb_addr; fi\0"
|
||||
#else
|
||||
#define EXTRA_ENV_DTB_RESERVE \
|
||||
"dtb_reserve=" \
|
||||
"if test -n \"$fb_addr\"; then " \
|
||||
"fdt addr $dtb_addr;" \
|
||||
"fdt resize;" \
|
||||
"fdt mk /reserved-memory display_reserved;" \
|
||||
"fdt set /reserved-memory/display_reserved " \
|
||||
"reg <$fb_addr 0x800000>;" \
|
||||
"fi;\0"
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SPLASH_SCREEN
|
||||
#define EXTRA_ENV_BOOT_LOGO \
|
||||
"splashimage=" __stringify(BMP_LOAD_ADDR)"\0" \
|
||||
"splashfile=" __stringify(SPLASH_FILE)"\0" \
|
||||
"splashpos=m,m\0" \
|
||||
"fb_addr=\0" \
|
||||
EXTRA_ENV_DTB_RESERVE
|
||||
#else
|
||||
#define EXTRA_ENV_BOOT_LOGO EXTRA_ENV_DTB_RESERVE
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
|
||||
"rootpart=" __stringify(CONFIG_ROOT_PART) "\0" \
|
||||
"bootpart=" __stringify(CONFIG_BOOT_PART) "\0" \
|
||||
"kernel=zImage\0" \
|
||||
"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
|
||||
"dtb_name=s5p4418-nanopi2-rev01.dtb\0" \
|
||||
"dtb_addr=" __stringify(KERNEL_DTB_ADDR) "\0" \
|
||||
"initrd_name=ramdisk.img\0" \
|
||||
"initrd_addr=" __stringify(INITRD_START) "\0" \
|
||||
"initrd_size=0x600000\0" \
|
||||
"load_dtb=" \
|
||||
BLOADER_MMC "${dtb_addr} ${dtb_name}; " \
|
||||
"run dtb_reserve\0" \
|
||||
"load_kernel=" \
|
||||
BLOADER_MMC "${loadaddr} ${kernel}\0" \
|
||||
"load_initrd=" \
|
||||
BLOADER_MMC "${initrd_addr} ${initrd_name}; " \
|
||||
"setenv initrd_size 0x${filesize}\0" \
|
||||
"mmcboot=" \
|
||||
"run load_kernel; run load_initrd; run load_dtb; " \
|
||||
"bootz ${loadaddr} ${initrd_addr}:${initrd_size} " \
|
||||
"${dtb_addr}\0" \
|
||||
"bootcmd=run mmcboot\0" \
|
||||
EXTRA_ENV_BOOT_LOGO
|
||||
|
||||
#endif /* __CONFIG_H__ */
|
||||
Loading…
Reference in New Issue
Block a user