Auto-size RAM on canmb board.

Cleanup.

CHANGELOG

@@ -6,6 +6,8 @@ Changes for U-Boot 1.1.3:
   Make PCI target address spaces on PMC405 and CPCI405 boards
   configurable via environment variables
 
+* Auto-size RAM on canmb board.
+
 * Add support for canmb board
 
 * Patch by Stefan Roese, 13 Apr 2005:

board/canmb/canmb.c

@@ -2,8 +2,8 @@
  * (C) Copyright 2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * (C) Copyright 2003
+ * (C) Copyright 2004
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -28,64 +28,209 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
-/*****************************************************************************
+#if defined(CONFIG_MPC5200_DDR)
- * initialize SDRAM/DDRAM controller.
+#include "mt46v16m16-75.h"
- * TBD: get data from I2C EEPROM
+#else
- *****************************************************************************/
+#include "mt48lc16m32s2-75.h"
+#endif
+
+#ifndef CFG_RAMBOOT
+static void sdram_start (int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
+	/* set mode register: extended mode */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	__asm__ volatile ("sync");
+
+	/* set mode register: reset DLL */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	__asm__ volatile ("sync");
+#endif
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* auto refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* set mode register */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	__asm__ volatile ("sync");
+
+	/* normal operation */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	__asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            is something else than 0x00000000.
+ */
+
+#if defined(CONFIG_MPC5200)
+long int initdram (int board_type)
+{
+	ulong dramsize = 0;
+	ulong dramsize2 = 0;
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
+	/* setup SDRAM chip selects */
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+	__asm__ volatile ("sync");
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
+	/* set tap delay */
+	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	__asm__ volatile ("sync");
+#endif
+
+	/* find RAM size using SDRAM CS0 only */
+	sdram_start(0);
+	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20)) {
+		dramsize = 0;
+	}
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+	} else {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+	}
+
+	/* let SDRAM CS1 start right after CS0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+	/* find RAM size using SDRAM CS1 only */
+	sdram_start(0);
+	test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize2 = test1;
+	} else {
+		dramsize2 = test2;
+	}
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize2 < (1 << 20)) {
+		dramsize2 = 0;
+	}
+
+	/* set SDRAM CS1 size according to the amount of RAM found */
+	if (dramsize2 > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+	} else {
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+	}
+
+#else /* CFG_RAMBOOT */
+
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	if (dramsize >= 0x13) {
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	} else {
+		dramsize = 0;
+	}
+
+	/* retrieve size of memory connected to SDRAM CS1 */
+	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	if (dramsize2 >= 0x13) {
+		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+	} else {
+		dramsize2 = 0;
+	}
+
+#endif /* CFG_RAMBOOT */
+
+	return dramsize + dramsize2;
+}
+
+#elif defined(CONFIG_MGT5100)
+
 long int initdram (int board_type)
 {
 	ulong dramsize = 0;
 #ifndef CFG_RAMBOOT
-#if 0
+	ulong test1, test2;
-	ulong	t;
-	ulong	tap_del;
-#endif
 
-	#define	MODE_EN		0x80000000
+	/* setup and enable SDRAM chip selects */
-	#define	SOFT_PRE	2
+	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	#define	SOFT_REF	4
+	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-
+	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-	/* configure SDRAM start/end */
+	__asm__ volatile ("sync");
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE;
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x8000000;
 
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 
-	/* unlock mode register */
+	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
+	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
-	/* precharge all banks */
+	__asm__ volatile ("sync");
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
+
-#ifdef CFG_DRAM_DDR
+	/* find RAM size */
-	/* set extended mode register */
+	sdram_start(0);
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
+	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-#endif
+	sdram_start(1);
-	/* set mode register */
+	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400;
+	if (test1 > test2) {
-	/* precharge all banks */
+		sdram_start(0);
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
+		dramsize = test1;
-	/* auto refresh */
+	} else {
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF;
+		dramsize = test2;
-	/* set mode register */
+	}
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE;
+
-	/* normal operation */
+	/* set SDRAM end address according to size */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL;
+	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-	/* write default TAP delay */
+
-	*(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24;
+#else /* CFG_RAMBOOT */
+
+	/* Retrieve amount of SDRAM available */
+	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
 #endif /* CFG_RAMBOOT */
 
-	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20) +
-		((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20);
-
-	/* return total ram size */
 	return dramsize;
 }
 
-/*****************************************************************************
+#else
- * print board identification
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
- *****************************************************************************/
+#endif
+
 int checkboard (void)
 {
 	puts ("Board: CANMB\n");

doc/README.ocotea-PIBS-to-U-Boot

@@ -77,14 +77,14 @@ U-Boot 1.1.3 (Apr  5 2005 - 22:59:57)
 
 IBM PowerPC 440 GX Rev. C
 Board: IBM 440GX Evaluation Board
-        VCO: 1066 MHz
+	VCO: 1066 MHz
-        CPU: 533 MHz
+	CPU: 533 MHz
-        PLB: 152 MHz
+	PLB: 152 MHz
-        OPB: 76 MHz
+	OPB: 76 MHz
-        EPB: 76 MHz
+	EPB: 76 MHz
 I2C:   ready
 DRAM:  256 MB
-FLASH:  5 MB
+FLASH:	5 MB
 PCI:   Bus Dev VenId DevId Class Int
 In:    serial
 Out:   serial

drivers/netconsole.c

@@ -153,11 +153,12 @@ int nc_start (void)
 	nc_port = 6666;		/* default port */
 
 	if (getenv ("ncip")) {
+		char *p;
+
 		nc_ip = getenv_IPaddr ("ncip");
 		if (!nc_ip)
 			return -1;	/* ncip is 0.0.0.0 */
-		char *p = strchr (getenv ("ncip"), ':');
+		if ((p = strchr (getenv ("ncip"), ':')) != NULL)
-		if (p)
 			nc_port = simple_strtoul (p + 1, NULL, 10);
 	} else
 		nc_ip = ~0;		/* ncip is not set */
@@ -188,13 +189,13 @@ void nc_putc (char c)
 
 void nc_puts (const char *s)
 {
+	int len;
+
 	if (output_recursion)
 		return;
 	output_recursion = 1;
 
-	int len = strlen (s);
+	if ((len = strlen (s)) > 512)
-
-	if (len > 512)
 		len = 512;
 
 	nc_send_packet (s, len);
@@ -204,6 +205,8 @@ void nc_puts (const char *s)
 
 int nc_getc (void)
 {
+	uchar c;
+
 	input_recursion = 1;
 
 	net_timeout = 0;	/* no timeout */
@@ -212,8 +215,8 @@ int nc_getc (void)
 
 	input_recursion = 0;
 
-	uchar c = input_buffer[input_offset];
+	c = input_buffer[input_offset++];
-	input_offset++;
+
 	if (input_offset >= sizeof input_buffer)
 		input_offset -= sizeof input_buffer;
 	input_size--;

include/configs/canmb.h

@@ -128,18 +128,6 @@
 #define CFG_FLASH_CFI
 #define CFG_FLASH_EMPTY_INFO
 
-/*
- * DRAM configuration
- */
-#define	CFG_DRAM_DDR		0
-#define CFG_DRAM_EMODE		0
-#define CFG_DRAM_MODE		0x00CD
-#define CFG_DRAM_CONTROL	0x514F0000
-#define CFG_DRAM_CONFIG1	0xD2333A00
-#define CFG_DRAM_CONFIG2	0x8AD70004
-#define	CFG_DRAM_TAP_DEL	0x08
-#define CFG_DRAM_RAM_SIZE	0x19
-
 /*
  * Environment settings
  */