diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index 6273133303..6e748bfebb 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -31,20 +31,6 @@ u-boot,dm-spl; }; - mcu_conf: scm_conf@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x40f00000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x40f00000 0x20000>; - - phy_sel: cpsw-phy-sel@4040 { - compatible = "ti,am654-cpsw-phy-sel"; - reg = <0x4040 0x4>; - reg-names = "gmii-sel"; - }; - }; - mcu_navss { u-boot,dm-spl; @@ -56,65 +42,6 @@ u-boot,dm-spl; }; }; - - mcu_cpsw: ethernet@046000000 { - compatible = "ti,j721e-cpsw-nuss"; - #address-cells = <2>; - #size-cells = <2>; - reg = <0x0 0x46000000 0x0 0x200000>; - reg-names = "cpsw_nuss"; - ranges; - dma-coherent; - clocks = <&k3_clks 18 22>; - clock-names = "fck"; - power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>; - cpsw-phy-sel = <&phy_sel>; - - dmas = <&mcu_udmap 0xf000>, - <&mcu_udmap 0xf001>, - <&mcu_udmap 0xf002>, - <&mcu_udmap 0xf003>, - <&mcu_udmap 0xf004>, - <&mcu_udmap 0xf005>, - <&mcu_udmap 0xf006>, - <&mcu_udmap 0xf007>, - <&mcu_udmap 0x7000>; - dma-names = "tx0", "tx1", "tx2", "tx3", - "tx4", "tx5", "tx6", "tx7", - "rx"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - host: host@0 { - reg = <0>; - ti,label = "host"; - }; - - cpsw_port1: port@1 { - reg = <1>; - ti,mac-only; - ti,label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; - }; - }; - - davinci_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - }; - - cpts { - clocks = <&k3_clks 18 2>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; - }; - }; }; &secure_proxy_main { @@ -224,6 +151,7 @@ reg = <0x0 0x46000000 0x0 0x200000>, <0x0 0x40f00200 0x0 0x2>; reg-names = "cpsw_nuss", "mac_efuse"; + /delete-property/ ranges; cpsw-phy-sel@40f04040 { compatible = "ti,am654-cpsw-phy-sel"; diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi index 70d5bcaa72..e6c99ab698 100644 --- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi @@ -35,6 +35,20 @@ }; }; + mcu_conf: syscon@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x40f00000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -242,4 +256,64 @@ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; }; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,j721e-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 18 22>; + clock-names = "fck"; + power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 18 22>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; };