From aaee5720f25e24d2f8d4164efb7ef7afcc2a534d Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Sat, 5 Nov 2022 17:23:56 +1300 Subject: [PATCH] net: mvneta: Add support for AlleyCat5 Add support for the AlleyCat5 SoC. This lacks the mbus from the other users of the mvneta.c driver so a new compatible string is needed to allow for a different window configuration. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese --- drivers/net/Kconfig | 2 +- drivers/net/mvneta.c | 43 ++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 43 insertions(+), 2 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6bbbadc5ee..8df3dce6df 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -448,7 +448,7 @@ config MVGBE config MVNETA bool "Marvell Armada XP/385/3700 network interface support" - depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 + depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5 select PHYLIB select DM_MDIO help diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c index d2c42c4396..0fbfad11d4 100644 --- a/drivers/net/mvneta.c +++ b/drivers/net/mvneta.c @@ -91,6 +91,8 @@ DECLARE_GLOBAL_DATA_PTR; #define MVNETA_WIN_SIZE_MASK (0xffff0000) #define MVNETA_BASE_ADDR_ENABLE 0x2290 #define MVNETA_BASE_ADDR_ENABLE_BIT 0x1 +#define MVNETA_AC5_CNM_DDR_TARGET 0x2 +#define MVNETA_AC5_CNM_DDR_ATTR 0xb #define MVNETA_PORT_ACCESS_PROTECT 0x2294 #define MVNETA_PORT_ACCESS_PROTECT_WIN0_RW 0x3 #define MVNETA_PORT_CONFIG 0x2400 @@ -282,6 +284,8 @@ struct mvneta_port { struct gpio_desc phy_reset_gpio; struct gpio_desc sfp_tx_disable_gpio; #endif + + uintptr_t dma_base; /* base address for DMA address decoding */ }; /* The mvneta_tx_desc and mvneta_rx_desc structures describe the @@ -1343,6 +1347,29 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp) mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable); } +static void mvneta_conf_ac5_cnm_xbar_windows(struct mvneta_port *pp) +{ + int i; + + /* Clear all windows */ + for (i = 0; i < 6; i++) { + mvreg_write(pp, MVNETA_WIN_BASE(i), 0); + mvreg_write(pp, MVNETA_WIN_SIZE(i), 0); + + if (i < 4) + mvreg_write(pp, MVNETA_WIN_REMAP(i), 0); + } + + /* + * Setup window #0 base 0x0 to target XBAR port 2 (AMB2), attribute 0xb, size 4GB + * AMB2 address decoder remaps 0x0 to DDR 64 bit base address + */ + mvreg_write(pp, MVNETA_WIN_BASE(0), + (MVNETA_AC5_CNM_DDR_ATTR << 8) | MVNETA_AC5_CNM_DDR_TARGET); + mvreg_write(pp, MVNETA_WIN_SIZE(0), 0xffff0000); + mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, 0x3e); +} + /* Power up the port */ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) { @@ -1525,7 +1552,7 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp) * No cache invalidation needed here, since the rx_buffer's are * located in a uncached memory region */ - *packetp = data; + *packetp = data + pp->dma_base; /* * Only mark one descriptor as free @@ -1544,6 +1571,10 @@ static int mvneta_probe(struct udevice *dev) struct ofnode_phandle_args sfp_args; #endif void *bd_space; + phys_addr_t cpu; + dma_addr_t bus; + u64 size; + int ret; /* * Allocate buffer area for descs and rx_buffers. This is only @@ -1577,9 +1608,18 @@ static int mvneta_probe(struct udevice *dev) /* Configure MBUS address windows */ if (device_is_compatible(dev, "marvell,armada-3700-neta")) mvneta_bypass_mbus_windows(pp); + else if (device_is_compatible(dev, "marvell,armada-ac5-neta")) + mvneta_conf_ac5_cnm_xbar_windows(pp); else mvneta_conf_mbus_windows(pp); + /* fetch dma ranges property */ + ret = dev_get_dma_range(dev, &cpu, &bus, &size); + if (!ret) + pp->dma_base = cpu; + else + pp->dma_base = 0; + #if CONFIG_IS_ENABLED(DM_GPIO) if (!dev_read_phandle_with_args(dev, "sfp", NULL, 0, 0, &sfp_args) && ofnode_is_enabled(sfp_args.node)) @@ -1620,6 +1660,7 @@ static const struct eth_ops mvneta_ops = { static const struct udevice_id mvneta_ids[] = { { .compatible = "marvell,armada-370-neta" }, + { .compatible = "marvell,armada-ac5-neta" }, { .compatible = "marvell,armada-xp-neta" }, { .compatible = "marvell,armada-3700-neta" }, { }