arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions

U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable
'mtd' command support for Espressobin board and define partition layout in
U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old
method and 'mtd' command is now preferred variant.

From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is
now defined and enabled in defconfig file. This change is required to fix
compile error:

      CC      arch/arm/lib/asm-offsets.s
    In file included from include/config.h:4,
                     from include/common.h:16,
                     from lib/asm-offsets.c:14:
    include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined
     #define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */

    In file included from ././include/linux/kconfig.h:4,
                     from <command-line>:
    include/generated/autoconf.h:44: note: this is the location of the previous definition
     #define CONFIG_MTD_PARTITIONS 1

After enabling support for mtd command, output from 'mtd list' on
Espressobin board is:

    => mtd list
    List of MTD devices:
    * w25q32dw
      - device: spi-flash@0
      - parent: spi@10600
      - driver: jedec_spi_nor
      - path: /soc/internal-regs/spi@10600/spi-flash@0
      - type: NOR flash
      - block size: 0x1000 bytes
      - min I/O: 0x1 bytes
      - 0x000000000000-0x000000400000 : "w25q32dw"
              - 0x000000000000-0x0000003f0000 : "firmware"
              - 0x0000003f0000-0x000000400000 : "u-boot-env"
    =>

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Pali Rohár 2021-07-16 12:34:42 +02:00 committed by Stefan Roese
parent 92f36c8e74
commit a675eb14bd
3 changed files with 21 additions and 5 deletions

View File

@ -164,6 +164,24 @@
reg = <0>; /* Chip select 0 */ reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>; spi-max-frequency = <50000000>;
m25p,fast-read; m25p,fast-read;
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@firmware {
reg = <0 CONFIG_ENV_OFFSET>;
label = "firmware";
};
partition@u-boot-env {
reg = <CONFIG_ENV_OFFSET CONFIG_ENV_SIZE>;
label = "u-boot-env";
};
};
#endif
}; };
}; };

View File

@ -28,6 +28,7 @@ CONFIG_BOARD_LATE_INIT=y
CONFIG_CMD_GPIO=y CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_PCI=y CONFIG_CMD_PCI=y
CONFIG_CMD_SPI=y CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
@ -54,6 +55,7 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_XENON=y CONFIG_MMC_SDHCI_XENON=y
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_GIGADEVICE=y
@ -62,6 +64,7 @@ CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MARVELL=y CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y CONFIG_PHY_GIGE=y
CONFIG_E1000=y CONFIG_E1000=y

View File

@ -57,11 +57,6 @@
#define CONFIG_I2C_MV #define CONFIG_I2C_MV
#define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SLAVE 0x0
/*
* SPI Flash configuration
*/
#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
/* /*
* Environment * Environment
*/ */