leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig

Browse Source 
This converts the following to Kconfig:
   CONFIG_SKIP_LOWLEVEL_INIT
   CONFIG_SKIP_LOWLEVEL_INIT_ONLY

In order to do this, we need to introduce SPL and TPL variants of these
options so that we can clearly disable these options only in SPL in some
cases, and both instances in other cases.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
2021-08-27 21:18:30 -04:00
parent ab92b38a01
commit a2ac2b964b
457 changed files with 512 additions and 310 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
board/bosch/guardian/Makefile
View File

@@ -5,7 +5,7 @@
# Copyright (C) 2018 Robert Bosch Power Tools GmbH
#
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/bosch/guardian/board.c
View File

@@ -40,7 +40,7 @@
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
static const struct ddr_data ddr3_data = {

2
board/eets/pdu001/Makefile
View File

@@ -6,7 +6,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

4
board/eets/pdu001/board.c
View File

@@ -162,7 +162,7 @@ static void set_mpu_and_core_voltage(void)
}
}
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static const struct ddr_data ddr2_data = {
.datardsratio0 = MT47H128M16RT25E_RD_DQS,
.datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,
@@ -235,7 +235,7 @@ void sdram_init(void)
config_ddr(266, &ioregs, &ddr2_data,
&ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
}
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
#ifdef CONFIG_DEBUG_UART
void board_debug_uart_init(void)

5
board/freescale/ls1021aqds/README
View File

@@ -113,6 +113,5 @@ Start Address End Address Description Size
LS1021a rev1.0 Soc specific Options/Settings
--------------------------------------------
If the LS1021a Soc is rev1.0, you need modify the configure file.
Add the following define in include/configs/ls1021aqds.h:
#define CONFIG_SKIP_LOWLEVEL_INIT
If the LS1021a Soc is rev1.0, you need modify the configuration and enable
CONFIG_SPL_SKIP_LOWLEVEL_INIT in menuconfig or similar.

5
board/freescale/ls1021atwr/README
View File

@@ -110,6 +110,5 @@ Start Address End Address Description Size
LS1021a rev1.0 Soc specific Options/Settings
--------------------------------------------
If the LS1021a Soc is rev1.0, you need modify the configure file.
Add the following define in include/configs/ls1021atwr.h:
#define CONFIG_SKIP_LOWLEVEL_INIT
If the LS1021a Soc is rev1.0, you need modify the configuration and enable
CONFIG_SPL_SKIP_LOWLEVEL_INIT in menuconfig or similar.

6
board/grinn/chiliboard/board.c
View File

@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
static __maybe_unused struct ctrl_dev *cdev =
(struct ctrl_dev *)CTRL_DEVICE_BASE;
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
@@ -69,9 +69,7 @@ static void enable_board_pin_mux(void)
configure_module_pin_mux(rmii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
}
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
void set_uart_mux_conf(void)
{
configure_module_pin_mux(uart0_pin_mux);
@@ -86,7 +84,7 @@ void am33xx_spl_board_init(void)
{
chilisom_spl_board_init();
}
#endif
#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
/*
* Basic board specific setup. Pinmux has been handled already.

2
board/qca/ap152/ap152.c
View File

@@ -66,7 +66,7 @@ int board_early_init_f(void)
void __iomem *rst_regs = map_physmem(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE, MAP_NOCACHE);
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
/* CPU:775, DDR:650, AHB:258 */
qca956x_pll_init();
qca956x_ddr_init();

2
board/tcl/sl50/Makefile
View File

@@ -4,7 +4,7 @@
#
# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/tcl/sl50/board.c
View File

@@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR;
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static const struct ddr_data ddr3_sl50_data = {
.datardsratio0 = MT41K256M16HA125E_RD_DQS,

2
board/ti/am335x/Makefile
View File

@@ -4,7 +4,7 @@
#
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/ti/am335x/board.c
View File

@@ -95,7 +95,7 @@ struct serial_device *default_serial_console(void)
}
#endif
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static const struct ddr_data ddr2_data = {
.datardsratio0 = MT47H128M16RT25E_RD_DQS,
.datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,

2
board/ti/am43xx/Makefile
View File

@@ -4,7 +4,7 @@
#
# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif

2
board/ti/am43xx/board.c
View File

@@ -56,7 +56,7 @@ void do_board_detect(void)
}
#endif
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
{ /* 19.2 MHz */

2
board/tplink/wdr4300/wdr4300.c
View File

@@ -71,7 +71,7 @@ int board_early_init_f(void)
wdr4300_pinmux_config();
#endif
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
ar934x_pll_init(560, 480, 240);
ar934x_ddr_init(560, 480, 240);
#endif

2
board/vscom/baltos/Makefile
View File

@@ -4,7 +4,7 @@
#
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif