diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 4d656ce4cc..4528a8ff42 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
armada-388-gp.dtb \
armada-385-amc.dtb \
armada-7040-db.dtb \
+ armada-7040-db-nand.dtb \
armada-8040-db.dtb \
armada-8040-mcbin.dtb \
armada-xp-gp.dtb \
diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts
index a5a8a7f186..4649c910c7 100644
--- a/arch/arm/dts/armada-385-amc.dts
+++ b/arch/arm/dts/armada-385-amc.dts
@@ -54,6 +54,7 @@
aliases {
ethernet0 = ð0;
ethernet1 = ð1;
+ i2c0 = &i2c0;
spi1 = &spi1;
};
@@ -68,6 +69,8 @@
internal-regs {
i2c@11000 {
+ clock-frequency = <100000>;
+ u-boot,i2c-slave-addr = <0x0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts
new file mode 100644
index 0000000000..3a9df21a8c
--- /dev/null
+++ b/arch/arm/dts/armada-7040-db-nand.dts
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: NAND, 0xE (SW3)
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+ model = "Marvell Armada 7040 DB board with NAND";
+ compatible = "marvell,armada7040-db-nand", "marvell,armada7040-db",
+ "marvell,armada7040", "marvell,armada-ap806-quad",
+ "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cpm_i2c0;
+ spi0 = &cpm_spi1;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&ap_pinctl {
+ /* MPP Bus:
+ * SDIO [0-5]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x1 0x1 0x1 0x1 0x1 0x1 0x0 0x0 0x0 0x0
+ 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x3 >;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+
+&cpm_pcie2 {
+ status = "okay";
+};
+
+&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_pinctl {
+ /* MPP Bus:
+ * AUDIO [0-5]
+ * GBE [6-11]
+ * SS_PWDN [12]
+ * NF_RBn [13]
+ * GPIO [14]
+ * DEV_BUS [15-27]
+ * SATA1 [28]
+ * UART0 [29-30]
+ * MSS_VTT_EN [31]
+ * SMI [32,34]
+ * XSMI [35-36]
+ * I2C [37-38]
+ * RGMII1 [44-55]
+ * SD [56-61]
+ * GPIO [62]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x2 0x2 0x2 0x2 0x2 0x2 0x3 0x3 0x3 0x3
+ 0x3 0x3 0x0 0x2 0x0 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x9 0xa
+ 0xa 0x0 0x7 0x0 0x7 0x7 0x7 0x2 0x2 0x0
+ 0x0 0x0 0x0 0x0 0x1 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0x0>;
+};
+
+&cpm_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_spi0_pins>;
+ status = "disabled";
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cpm_sata0 {
+ status = "okay";
+};
+
+&cpm_usb3_0 {
+ status = "okay";
+};
+
+&cpm_usb3_1 {
+ status = "okay";
+};
+
+&cpm_comphy {
+ phy0 {
+ phy-type = <PHY_TYPE_SGMII2>;
+ phy-speed = <PHY_SPEED_3_125G>;
+ };
+
+ phy1 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy2 {
+ phy-type = <PHY_TYPE_SGMII0>;
+ phy-speed = <PHY_SPEED_1_25G>;
+ };
+
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+};
+
+&cpm_nand {
+ status = "okay";
+};
+
+&cpm_utmi0 {
+ status = "okay";
+};
+
+&cpm_utmi1 {
+ status = "okay";
+};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index 84e0dbdc3d..b140b3476e 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -42,6 +42,7 @@
/*
* Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: SPI NOR, 0x32 (SW3)
*/
#include "armada-7040.dtsi"
@@ -158,7 +159,7 @@
&cpm_comphy {
phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
+ phy-type = <PHY_TYPE_SGMII1>;
phy-speed = <PHY_SPEED_1_25G>;
};
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index f1f196f563..fa589956ad 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -83,28 +83,68 @@
&cpm_pinctl {
/* MPP Bus:
- * [0-31] = 0xff: Keep default CP0_shared_pins:
- * [11] CLKOUT_MPP_11 (out)
- * [23] LINK_RD_IN_CP2CP (in)
- * [25] CLKOUT_MPP_25 (out)
- * [29] AVS_FB_IN_CP2CP (in)
- * [32,34] SMI
- * [31] GPIO: push button/Wake
- * [35-36] GPIO
- * [37-38] I2C
- * [40-41] SATA[0/1]_PRESENT_ACTIVEn
- * [42-43] XSMI
- * [44-55] RGMII1
- * [56-62] SD
+ * [0-31] = 0xff: Keep default CP0_shared_pins
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32,34] GE_MDIO/MDC
+ * [33] GPIO: GE_INT#/push button/Wake
+ * [35] MSS_GPIO[3]: MSS_PWDN
+ * [36] MSS_GPIO[5]: MSS_VTT_EN
+ * [37-38] I2C0
+ * [39] PTP_CLK
+ * [40-41] SATA[0/1]_PRESENT_ACTIVEn
+ * [42-43] XG_MDC/XG_MDIO (XSMI)
+ * [44-55] RGMII1
+ * [56-62] SD
*/
- /* 0 1 2 3 4 5 6 7 8 9 */
+ /* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
- 0xff 0 7 0 7 0 0 2 2 0
- 0 0 8 8 1 1 1 1 1 1
- 1 1 1 1 1 1 0xe 0xe 0xe 0xe
- 0xe 0xe 0xe >;
+ 0xff 0xff 0x7 0x0 0x7 0xa 0xa 0x2 0x2 0x5
+ 0x9 0x9 0x8 0x8 0x1 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0xe>;
+};
+
+&cpm_comphy {
+ /* Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: SATA0
+ * Lane 2: SFI (10G)
+ * Lane 3: SATA1
+ * Lane 4: USB3_HOST1
+ * Lane 5: PCIe2 (x1)
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_SFI>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ };
+};
+
+/* CON6 on CP0 expansion */
+&cpm_pcie0 {
+ status = "okay";
+};
+
+&cpm_pcie1 {
+ status = "disabled";
};
/* CON5 on CP0 expansion */
@@ -134,21 +174,69 @@
status = "okay";
};
+&cpm_utmi0 {
+ status = "okay";
+};
+
+&cpm_utmi1 {
+ status = "okay";
+};
+
&cps_pinctl {
/* MPP Bus:
- * [0-11] RGMII0
- * [13-16] SPI1
- * [27,31] GE_MDIO/MDC
- * [32-62] = 0xff: Keep default CP1_shared_pins:
+ * [0-11] RGMII0
+ * [13-16] SPI1
+ * [27,31] GE_MDIO/MDC
+ * [28] SATA1_PRESENT_ACTIVEn
+ * [29-30] UART0
+ * [32-62] = 0xff: Keep default CP1_shared_pins
*/
- /* 0 1 2 3 4 5 6 7 8 9 */
+ /* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3
- 0x3 0x3 0xff 0x3 0x3 0x3 0x3 0xff 0xff 0xff
- 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0xff 0xff
- 0xff 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0x9 0xa
+ 0xA 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
- 0xff 0xff 0xff >;
+ 0xff 0xff 0xff>;
+};
+
+&cps_comphy {
+ /* Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: SATA0
+ * Lane 2: SFI (10G)
+ * Lane 3: SATA1
+ * Lane 4: PCIe1 (x1)
+ * Lane 5: PCIe2 (x1)
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_SFI>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_PEX1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ };
+};
+
+/* CON6 on CP1 expansion */
+&cps_pcie0 {
+ status = "okay";
+};
+
+&cps_pcie1 {
+ status = "okay";
};
/* CON5 on CP1 expansion */
@@ -200,86 +288,6 @@
status = "okay";
};
-&cpm_comphy {
- /*
- * Serdes Configuration:
- * Lane 0: SGMII2
- * Lane 1: USB3_HOST0
- * Lane 2: KR (10G)
- * Lane 3: SATA1
- * Lane 4: USB3_HOST1
- * Lane 5: PEX2x1
- */
- phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_KR>;
- };
-
- phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- };
-
- phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
- };
-
- phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- };
-};
-
-&cps_comphy {
- /*
- * Serdes Configuration:
- * Lane 0: SGMII2
- * Lane 1: USB3_HOST0
- * Lane 2: KR (10G)
- * Lane 3: SATA1
- * Lane 4: Unconnected
- * Lane 5: PEX2x1
- */
- phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_KR>;
- };
-
- phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- };
-
- phy4 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
- };
-
- phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- };
-};
-
-&cpm_utmi0 {
- status = "okay";
-};
-
-&cpm_utmi1 {
- status = "okay";
-};
-
&cps_utmi0 {
status = "okay";
};
diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
index e42b092b25..991ddc0c43 100644
--- a/arch/arm/dts/armada-8040-mcbin.dts
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -99,7 +99,7 @@
* [54] 2.5G SFP LOS
* [55] Micro SD card detect
* [56-61] Micro SD
- * [62] CP1 KR SFP FAULT
+ * [62] CP1 SFI SFP FAULT
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
@@ -163,7 +163,7 @@
* Lane 1: PCIe0 (x4)
* Lane 2: PCIe0 (x4)
* Lane 3: PCIe0 (x4)
- * Lane 4: KR (10G)
+ * Lane 4: SFI (10G)
* Lane 5: SATA1
*/
phy0 {
@@ -179,7 +179,7 @@
phy-type = <PHY_TYPE_PEX0>;
};
phy4 {
- phy-type = <PHY_TYPE_KR>;
+ phy-type = <PHY_TYPE_SFI>;
};
phy5 {
phy-type = <PHY_TYPE_SATA1>;
@@ -264,15 +264,15 @@
&cps_comphy {
/*
* CP1 Serdes Configuration:
- * Lane 0: SGMII2
+ * Lane 0: SGMII1
* Lane 1: SATA 0
* Lane 2: USB HOST 0
* Lane 3: SATA1
- * Lane 4: KR (10G)
+ * Lane 4: SFI (10G)
* Lane 5: SGMII3
*/
phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
+ phy-type = <PHY_TYPE_SGMII1>;
phy-speed = <PHY_SPEED_1_25G>;
};
phy1 {
@@ -285,7 +285,7 @@
phy-type = <PHY_TYPE_SATA1>;
};
phy4 {
- phy-type = <PHY_TYPE_KR>;
+ phy-type = <PHY_TYPE_SFI>;
};
phy5 {
phy-type = <PHY_TYPE_SGMII3>;
diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
index 229046fba7..8c336f2c38 100644
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ b/arch/arm/dts/armada-cp110-master.dtsi
@@ -253,7 +253,7 @@
reg = <0x580000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
<0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB_HOST0>;
+ utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
status = "disabled";
};
@@ -262,7 +262,7 @@
reg = <0x581000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
<0x440444 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB_HOST1>;
+ utmi-port = <UTMI_PHY_TO_USB3_HOST1>;
status = "disabled";
};
@@ -273,6 +273,20 @@
dma-coherent;
status = "disabled";
};
+
+ cpm_nand: nand@720000 {
+ compatible = "marvell,mvebu-pxa3xx-nand";
+ reg = <0x720000 0x100>;
+ #address-cells = <1>;
+
+ clocks = <&cpm_syscon0 1 2>;
+ nand-enable-arbiter;
+ num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ status = "disabled";
+ };
+
};
cpm_pcie0: pcie@f2600000 {
diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi
index 5876391449..0cdb3d3ae3 100644
--- a/arch/arm/dts/armada-cp110-slave.dtsi
+++ b/arch/arm/dts/armada-cp110-slave.dtsi
@@ -254,7 +254,7 @@
reg = <0x580000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
<0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB_HOST0>;
+ utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
status = "disabled";
};
};
diff --git a/arch/arm/mach-mvebu/arm64-common.c b/arch/arm/mach-mvebu/arm64-common.c
index 2ef5726905..c2c176e3d4 100644
--- a/arch/arm/mach-mvebu/arm64-common.c
+++ b/arch/arm/mach-mvebu/arm64-common.c
@@ -8,6 +8,7 @@
#include <dm.h>
#include <fdtdec.h>
#include <libfdt.h>
+#include <pci.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/arch/cpu.h>
@@ -147,5 +148,10 @@ int arch_early_init_r(void)
/* Cause the SATA device to do its early init */
uclass_first_device(UCLASS_AHCI, &dev);
+#ifdef CONFIG_DM_PCI
+ /* Trigger PCIe devices detection */
+ pci_init();
+#endif
+
return 0;
}
diff --git a/arch/arm/mach-mvebu/armada8k/cpu.c b/arch/arm/mach-mvebu/armada8k/cpu.c
index 2325e9a180..38e7d33cb3 100644
--- a/arch/arm/mach-mvebu/armada8k/cpu.c
+++ b/arch/arm/mach-mvebu/armada8k/cpu.c
@@ -110,3 +110,21 @@ void reset_cpu(ulong ignored)
reg &= ~(1 << RFU_SW_RESET_OFFSET);
writel(reg, RFU_GLOBAL_SW_RST);
}
+
+/*
+ * TODO - implement this functionality using platform
+ * clock driver once it gets available
+ * Return NAND clock in Hz
+ */
+u32 mvebu_get_nand_clock(void)
+{
+ unsigned long NAND_FLASH_CLK_CTRL = 0xF2440700UL;
+ unsigned long NF_CLOCK_SEL_MASK = 0x1;
+ u32 reg;
+
+ reg = readl(NAND_FLASH_CLK_CTRL);
+ if (reg & NF_CLOCK_SEL_MASK)
+ return 400 * 1000000;
+ else
+ return 250 * 1000000;
+}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
index 104e7e88d7..0dfb9452e6 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
@@ -13,8 +13,6 @@
#include "high_speed_env_spec.h"
#include "sys_env_lib.h"
-#define SERDES_VERION "2.0"
-
u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = {
/* 0 1 2 3 4 5 */
{0x1, 0x1, NA, NA, NA, NA}, /* PEX0 */
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 820219e68e..883b90776a 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -27,7 +27,7 @@
*/
struct cfg_seq serdes_seq_db[SERDES_LAST_SEQ];
-#define SERDES_VERION "2.0"
+#define SERDES_VERSION "2.0"
#define ENDED_OK "High speed PHY - Ended Successfully\n"
#define LINK_WAIT_CNTR 100
@@ -1416,7 +1416,7 @@ int serdes_phy_config(void)
DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n");
DEBUG_INIT_S("High speed PHY - Version: ");
- DEBUG_INIT_S(SERDES_VERION);
+ DEBUG_INIT_S(SERDES_VERSION);
DEBUG_INIT_S("\n");
/* Init serdes sequences DB */
diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c
index 5925bae69f..b0e193b78c 100644
--- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c
+++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c
@@ -14,7 +14,7 @@
#include "high_speed_env_spec.h"
#include "board_env_spec.h"
-#define SERDES_VERION "2.1.5"
+#define SERDES_VERSION "2.1.5"
#define ENDED_OK "High speed PHY - Ended Successfully\n"
static const u8 serdes_cfg[][SERDES_LAST_UNIT] = BIN_SERDES_CFG;
@@ -285,12 +285,12 @@ int serdes_phy_config(void)
if (reg_read(REG_BOOTROM_ROUTINE_ADDR) &
(1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) {
DEBUG_INIT_S("High speed PHY - Version: ");
- DEBUG_INIT_S(SERDES_VERION);
+ DEBUG_INIT_S(SERDES_VERSION);
DEBUG_INIT_S(" - 2nd boot - Skip\n");
return MV_OK;
}
DEBUG_INIT_S("High speed PHY - Version: ");
- DEBUG_INIT_S(SERDES_VERION);
+ DEBUG_INIT_S(SERDES_VERSION);
DEBUG_INIT_S(" (COM-PHY-V20)\n");
/*
diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c
index 115ec2cd60..704a59fa15 100644
--- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c
@@ -5,7 +5,6 @@
*/
#include <common.h>
-#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index b752927e8c..1e1f0af35c 100644
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -309,16 +309,17 @@ static int is_spi_active(void)
#ifdef CONFIG_CMD_NAND
static int nand_burn_image(size_t image_size)
{
- int ret, block_size;
- nand_info_t *nand;
+ int ret;
+ uint32_t block_size;
+ struct mtd_info *nand;
int dev = nand_curr_device;
if ((dev < 0) || (dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
- (!nand_info[dev].name)) {
+ (!nand_info[dev]->name)) {
puts("\nno devices available\n");
return -ENOMEDIUM;
}
- nand = &nand_info[dev];
+ nand = nand_info[dev];
block_size = nand->erasesize;
/* Align U-Boot size to currently used blocksize */
@@ -334,8 +335,8 @@ static int nand_burn_image(size_t image_size)
printf("Done!\n");
/* Write the image to flash */
- printf("Writing image:...");
- printf("&image_size = 0x%p\n", (void *)&image_size);
+ printf("Writing %d bytes from 0x%lx to offset 0 ... ",
+ (int)image_size, get_load_addr());
ret = nand_write(nand, 0, &image_size, (void *)get_load_addr());
if (ret)
printf("Error!\n");
diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig
index e90526a402..63fc4db6c8 100644
--- a/configs/db-88f6820-amc_defconfig
+++ b/configs/db-88f6820-amc_defconfig
@@ -36,6 +36,8 @@ CONFIG_EFI_PARTITION=y
# CONFIG_PARTITION_UUIDS is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
# CONFIG_MMC is not set
CONFIG_NAND_PXA3XX=y
CONFIG_SPI_FLASH=y
diff --git a/configs/mvebu_db-88f7040-nand_defconfig b/configs/mvebu_db-88f7040-nand_defconfig
new file mode 100644
index 0000000000..d86c18ed08
--- /dev/null
+++ b/configs/mvebu_db-88f7040-nand_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_MVEBU_ARMADA_8K=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db-nand"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_BOARD_LATE_INIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_NAND=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_CACHE=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_MVEBU_NAND_BOOT=y
+CONFIG_NAND_PXA3XX=y
+CONFIG_PHYLIB=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_DW_MVEBU=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xf0512000
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_SMBIOS_MANUFACTURER=""
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index dfe8966b56..0042a7ba11 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <malloc.h>
+#include <fdtdec.h>
#include <nand.h>
#include <linux/errno.h>
#include <asm/io.h>
@@ -19,6 +20,8 @@
#include "pxa3xx_nand.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define TIMEOUT_DRAIN_FIFO 5 /* in ms */
#define CHIP_DELAY_TIMEOUT 200
#define NAND_STOP_DELAY 40
@@ -1510,8 +1513,6 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
chip->cmdfunc = nand_cmdfunc;
}
- info->mmio_base = (void __iomem *)MVEBU_NAND_BASE;
-
/* Allocate a buffer to allow flash detection */
info->buf_size = INIT_BUFFER_SIZE;
info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
@@ -1533,17 +1534,62 @@ fail_disable_clk:
static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
{
struct pxa3xx_nand_platform_data *pdata;
+ const void *blob = gd->fdt_blob;
+ int node = -1;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- pdata->enable_arbiter = 1;
- pdata->num_cs = 1;
+ /* Get address decoding nodes from the FDT blob */
+ do {
+ node = fdt_node_offset_by_compatible(blob, node,
+ "marvell,mvebu-pxa3xx-nand");
+ if (node < 0)
+ break;
- info->pdata = pdata;
+ /* Bypass disabeld nodes */
+ if (!fdtdec_get_is_enabled(blob, node))
+ continue;
- return 0;
+ /* Get the first enabled NAND controler base address */
+ info->mmio_base =
+ (void __iomem *)fdtdec_get_addr_size_auto_noparent(
+ blob, node, "reg", 0, NULL, true);
+
+ pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
+ if (pdata->num_cs != 1) {
+ error("pxa3xx driver supports single CS only\n");
+ break;
+ }
+
+ if (fdtdec_get_bool(blob, node, "nand-enable-arbiter"))
+ pdata->enable_arbiter = 1;
+
+ if (fdtdec_get_bool(blob, node, "nand-keep-config"))
+ pdata->keep_config = 1;
+
+ /*
+ * ECC parameters.
+ * If these are not set, they will be selected according
+ * to the detected flash type.
+ */
+ /* ECC strength */
+ pdata->ecc_strength = fdtdec_get_int(blob, node,
+ "nand-ecc-strength", 0);
+
+ /* ECC step size */
+ pdata->ecc_step_size = fdtdec_get_int(blob, node,
+ "nand-ecc-step-size", 0);
+
+ info->pdata = pdata;
+
+ /* Currently support only a single NAND controller */
+ return 0;
+
+ } while (node >= 0);
+
+ return -EINVAL;
}
static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
@@ -1603,8 +1649,8 @@ void board_nand_init(void)
int ret;
info = kzalloc(sizeof(*info) +
- sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE,
- GFP_KERNEL);
+ sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE,
+ GFP_KERNEL);
if (!info)
return;
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 8ffe6c84d4..08adb68aa5 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -2618,6 +2618,13 @@ static void mvpp2_bm_pool_bufsize_set(struct mvpp2 *priv,
static void mvpp2_bm_bufs_free(struct udevice *dev, struct mvpp2 *priv,
struct mvpp2_bm_pool *bm_pool)
{
+ int i;
+
+ for (i = 0; i < bm_pool->buf_num; i++) {
+ /* Allocate buffer back from the buffer manager */
+ mvpp2_read(priv, MVPP2_BM_PHY_ALLOC_REG(bm_pool->id));
+ }
+
bm_pool->buf_num = 0;
}
@@ -5501,6 +5508,21 @@ static int mvpp2_probe(struct udevice *dev)
return 0;
}
+/*
+ * Empty BM pool and stop its activity before the OS is started
+ */
+static int mvpp2_remove(struct udevice *dev)
+{
+ struct mvpp2_port *port = dev_get_priv(dev);
+ struct mvpp2 *priv = port->priv;
+ int i;
+
+ for (i = 0; i < MVPP2_BM_POOLS_NUM; i++)
+ mvpp2_bm_pool_destroy(dev, priv, &priv->bm_pools[i]);
+
+ return 0;
+}
+
static const struct eth_ops mvpp2_ops = {
.start = mvpp2_start,
.send = mvpp2_send,
@@ -5512,9 +5534,11 @@ static struct driver mvpp2_driver = {
.name = "mvpp2",
.id = UCLASS_ETH,
.probe = mvpp2_probe,
+ .remove = mvpp2_remove,
.ops = &mvpp2_ops,
.priv_auto_alloc_size = sizeof(struct mvpp2_port),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
+ .flags = DM_FLAG_ACTIVE_DMA,
};
/*
diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c
index d4776a9c81..05a06604e6 100644
--- a/drivers/pci/pcie_dw_mvebu.c
+++ b/drivers/pci/pcie_dw_mvebu.c
@@ -487,13 +487,13 @@ static int pcie_dw_mvebu_probe(struct udevice *dev)
/* Don't register host if link is down */
if (!pcie_dw_mvebu_pcie_link_up(pcie->ctrl_base, LINK_SPEED_GEN_3)) {
printf("PCIE-%d: Link down\n", dev->seq);
- return -ENODEV;
+ } else {
+ printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq,
+ pcie_dw_get_link_speed(pcie->ctrl_base),
+ pcie_dw_get_link_width(pcie->ctrl_base),
+ hose->first_busno);
}
- printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq,
- pcie_dw_get_link_speed(pcie->ctrl_base),
- pcie_dw_get_link_width(pcie->ctrl_base), hose->first_busno);
-
pcie_dw_regions_setup(pcie);
/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
diff --git a/drivers/phy/marvell/comphy.h b/drivers/phy/marvell/comphy.h
index 0a15692579..c9b94a4c5e 100644
--- a/drivers/phy/marvell/comphy.h
+++ b/drivers/phy/marvell/comphy.h
@@ -86,6 +86,7 @@ struct comphy_map {
u32 speed;
u32 invert;
bool clk_src;
+ bool end_point;
};
struct chip_serdes_phy_config {
@@ -96,7 +97,7 @@ struct chip_serdes_phy_config {
void __iomem *hpipe3_base_addr;
u32 comphy_lanes_count;
u32 comphy_mux_bitcount;
- u32 comphy_index;
+ u32 cp_index;
};
/* Register helper functions */
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index caa1928f07..596921b6c3 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -37,7 +37,7 @@ static char *get_type_string(u32 type)
"SGMII1", "SGMII2", "SGMII3", "QSGMII",
"USB3_HOST0", "USB3_HOST1", "USB3_DEVICE",
"XAUI0", "XAUI1", "XAUI2", "XAUI3",
- "RXAUI0", "RXAUI1", "KR"};
+ "RXAUI0", "RXAUI1", "SFI", "IGNORE"};
if (type < 0 || type > PHY_TYPE_MAX)
return "invalid";
@@ -90,9 +90,6 @@ void comphy_print(struct chip_serdes_phy_config *chip_cfg,
for (lane = 0; lane < chip_cfg->comphy_lanes_count;
lane++, comphy_map_data++) {
- if (comphy_map_data->type == PHY_TYPE_UNCONNECTED)
- continue;
-
if (comphy_map_data->speed == PHY_SPEED_INVALID) {
printf("Comphy-%d: %-13s\n", lane,
get_type_string(comphy_map_data->type));
@@ -113,6 +110,7 @@ static int comphy_probe(struct udevice *dev)
int subnode;
int lane;
int last_idx = 0;
+ static int current_idx;
/* Save base addresses for later use */
chip_cfg->comphy_base_addr = (void *)dev_get_addr_index(dev, 0);
@@ -166,6 +164,8 @@ static int comphy_probe(struct udevice *dev)
blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT);
comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode,
"clk-src");
+ comphy_map_data[lane].end_point = fdtdec_get_bool(blob, subnode,
+ "end_point");
if (comphy_map_data[lane].type == PHY_TYPE_INVALID) {
printf("no phy type for lane %d, setting lane as unconnected\n",
lane + 1);
@@ -174,13 +174,13 @@ static int comphy_probe(struct udevice *dev)
lane++;
}
- /* Save comphy index for MultiCP devices (A8K) */
- chip_cfg->comphy_index = dev->seq;
+ /* Save CP index for MultiCP devices (A8K) */
+ chip_cfg->cp_index = current_idx++;
/* PHY power UP sequence */
chip_cfg->ptr_comphy_chip_init(chip_cfg, comphy_map_data);
/* PHY print SerDes status */
if (of_machine_is_compatible("marvell,armada8040"))
- printf("Comphy chip #%d:\n", chip_cfg->comphy_index);
+ printf("Comphy chip #%d:\n", chip_cfg->cp_index);
comphy_print(chip_cfg, comphy_map_data);
/*
@@ -189,7 +189,7 @@ static int comphy_probe(struct udevice *dev)
if (of_machine_is_compatible("marvell,armada8040"))
last_idx = 1;
- if (chip_cfg->comphy_index == last_idx) {
+ if (chip_cfg->cp_index == last_idx) {
/* Initialize dedicated PHYs (not muxed SerDes lanes) */
comphy_dedicated_phys_init();
}
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 25c067d23f..3ac405a9be 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -34,26 +34,23 @@ struct utmi_phy_data {
* PIPE selector include USB and PCIe options.
* PHY selector include the Ethernet and SATA options, every Ethernet
* option has different options, for example: serdes lane2 had option
- * Eth_port_0 that include (SGMII0, XAUI0, RXAUI0, KR)
+ * Eth_port_0 that include (SGMII0, RXAUI0, SFI)
*/
struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
- {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 0 */
- {PHY_TYPE_XAUI2, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
- {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII3, 0x1}, /* Lane 1 */
- {PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA0, 0x4} } },
+ {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII1, 0x1}, /* Lane 0 */
+ {PHY_TYPE_SATA1, 0x4} } },
+ {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 1 */
+ {PHY_TYPE_SATA0, 0x4} } },
{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */
- {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1},
- {PHY_TYPE_KR, 0x1}, {PHY_TYPE_SATA0, 0x4} } },
- {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 3 */
- {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1},
- {PHY_TYPE_KR, 0x1}, {PHY_TYPE_XAUI1, 0x1},
- {PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
+ {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x1},
+ {PHY_TYPE_SATA0, 0x4} } },
+ {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_RXAUI1, 0x1}, /* Lane 3 */
+ {PHY_TYPE_SGMII1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
{7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
- {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_KR, 0x1},
- {PHY_TYPE_SGMII2, 0x1}, {PHY_TYPE_XAUI2, 0x1} } },
- {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_XAUI1, 0x1}, /* Lane 5 */
- {PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SGMII3, 0x1},
- {PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
+ {PHY_TYPE_RXAUI0, 0x2}, {PHY_TYPE_SFI, 0x2},
+ {PHY_TYPE_SGMII1, 0x1} } },
+ {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 5 */
+ {PHY_TYPE_RXAUI1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
};
struct comphy_mux_data cp110_comphy_pipe_mux_data[] = {
@@ -87,8 +84,8 @@ static u32 polling_with_timeout(void __iomem *addr, u32 val,
return 0;
}
-static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
- bool clk_src, void __iomem *hpipe_base,
+static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
+ bool is_end_point, void __iomem *hpipe_base,
void __iomem *comphy_base)
{
u32 mask, data, ret = 1;
@@ -109,6 +106,7 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
* and SerDes Lane 0 got PCIe ref-clock #0
*/
debug("PCIe clock = %x\n", pcie_clk);
+ debug("PCIe RC = %d\n", !is_end_point);
debug("PCIe width = %d\n", pcie_width);
/* enable PCIe by4 and by2 */
@@ -234,6 +232,8 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
mask |= HPIPE_MISC_REFCLK_SEL_MASK;
data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET;
}
+ mask |= HPIPE_MISC_ICP_FORCE_MASK;
+ data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
if (pcie_clk) { /* output */
/* Set reference frequcency select - 0x2 for 25MHz*/
@@ -269,6 +269,9 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
/* Set Maximal PHY Generation Setting(8Gbps) */
mask = HPIPE_INTERFACE_GEN_MAX_MASK;
data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;
+ /* Bypass frame detection and sync detection for RX DATA */
+ mask = HPIPE_INTERFACE_DET_BYPASS_MASK;
+ data = 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET;
/* Set Link Train Mode (Tx training control pins are used) */
mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK;
data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;
@@ -353,21 +356,21 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
- /* Force DFE resolution (use GEN table value) */
+ /* Use TX/RX training result for DFE */
mask = HPIPE_DFE_RES_FORCE_MASK;
- data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+ data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
/* Configure initial and final coefficient value for receiver */
- mask = HPIPE_G3_RX_SELMUPI_MASK;
- data = 0x1 << HPIPE_G3_RX_SELMUPI_OFFSET;
+ mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
+ data = 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
- mask |= HPIPE_G3_RX_SELMUPF_MASK;
- data |= 0x1 << HPIPE_G3_RX_SELMUPF_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
+ data |= 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
- mask |= HPIPE_G3_SETTING_BIT_MASK;
- data |= 0x0 << HPIPE_G3_SETTING_BIT_OFFSET;
- reg_set(hpipe_addr + HPIPE_G3_SETTINGS_1_REG, data, mask);
+ mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
+ data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask);
/* Trigger sampler enable pulse */
mask = HPIPE_SMAPLER_MASK;
@@ -381,13 +384,70 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width,
data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
- data |= 0x1 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+ data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
- /* Set phy in root complex mode */
- mask = HPIPE_CFG_PHY_RC_EP_MASK;
- data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET;
- reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask);
+ /* Pattern lock lost timeout disable */
+ mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+ data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+ /* Configure DFE adaptations */
+ mask = HPIPE_CDR_MAX_DFE_ADAPT_1_MASK;
+ data = 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET;
+ mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK;
+ data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET;
+ mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK;
+ data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET;
+ reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+ mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK;
+ data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask);
+
+ /* Genration 2 setting 1*/
+ mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+ data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
+ data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+ data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+ /* DFE enable */
+ mask = HPIPE_G2_DFE_RES_MASK;
+ data = 0x3 << HPIPE_G2_DFE_RES_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask);
+
+ /* Configure DFE Resolution */
+ mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK;
+ data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+
+ /* VDD calibration control */
+ mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+ data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+ /* Set PLL Charge-pump Current Control */
+ mask = HPIPE_G3_SETTING_5_G3_ICP_MASK;
+ data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask);
+
+ /* Set lane rqualization remote setting */
+ mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK;
+ data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET;
+ mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK;
+ data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET;
+ mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK;
+ data |= 0x2 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET;
+ reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask);
+
+ if (!is_end_point) {
+ /* Set phy in root complex mode */
+ mask = HPIPE_CFG_PHY_RC_EP_MASK;
+ data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET;
+ reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask);
+ }
debug("stage: Comphy power up\n");
@@ -582,7 +642,7 @@ static int comphy_usb3_power_up(u32 lane, void __iomem *hpipe_base,
}
static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
- void __iomem *comphy_base, int comphy_index)
+ void __iomem *comphy_base, int cp_index)
{
u32 mask, data, i, ret = 1;
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
@@ -601,7 +661,7 @@ static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
* In order to parse each CPs SATA node, fdt_node_offset_by_compatible
* must be called again (according to the CP id)
*/
- for (i = 0; i < (comphy_index + 1); i++)
+ for (i = 0; i < (cp_index + 1); i++)
sata_node = fdt_node_offset_by_compatible(
gd->fdt_blob, sata_node, "marvell,armada-8k-ahci");
@@ -690,10 +750,176 @@ static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base,
0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
debug("stage: Analog paramters from ETP(HW)\n");
- /*
- * TODO: Set analog paramters from ETP(HW) - for now use the
- * default datas
- */
+ /* Set analog parameters from ETP(HW) */
+ /* G1 settings */
+ mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+ data = 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+ data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+ data |= 0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
+ mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+ data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+ data |= 0x2 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+ data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK;
+ data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK;
+ data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+ /* G2 settings */
+ mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+ data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
+ data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+ data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK;
+ data |= 0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK;
+ data |= 0x1 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+ /* G3 settings */
+ mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
+ data = 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
+ data |= 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK;
+ data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK;
+ data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK;
+ data |= 0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK;
+ data |= 0x2 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET;
+ mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
+ data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask);
+
+ /* DTL Control */
+ mask = HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK;
+ data = 0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET;
+ mask |= HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK;
+ data |= 0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET;
+ mask |= HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+ data |= 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+ mask |= HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK;
+ data |= 0x1 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET;
+ mask |= HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK;
+ data |= 0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET;
+ mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_MASK;
+ data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET;
+ mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK;
+ data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+ /* Trigger sampler enable pulse (by toggleing the bit) */
+ mask = HPIPE_SMAPLER_MASK;
+ data = 0x1 << HPIPE_SMAPLER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+ mask = HPIPE_SMAPLER_MASK;
+ data = 0x0 << HPIPE_SMAPLER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+ /* VDD Calibration Control 3 */
+ mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+ data = 0x10 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+ /* DFE Resolution Control */
+ mask = HPIPE_DFE_RES_FORCE_MASK;
+ data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+ /* DFE F3-F5 Coefficient Control */
+ mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+ data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+ mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+ data = 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+ /* G3 Setting 3 */
+ mask = HPIPE_G3_FFE_CAP_SEL_MASK;
+ data = 0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET;
+ mask |= HPIPE_G3_FFE_RES_SEL_MASK;
+ data |= 0x4 << HPIPE_G3_FFE_RES_SEL_OFFSET;
+ mask |= HPIPE_G3_FFE_SETTING_FORCE_MASK;
+ data |= 0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET;
+ mask |= HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
+ data |= 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
+ mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
+ data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
+
+ /* G3 Setting 4 */
+ mask = HPIPE_G3_DFE_RES_MASK;
+ data = 0x2 << HPIPE_G3_DFE_RES_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
+
+ /* Offset Phase Control */
+ mask = HPIPE_OS_PH_OFFSET_MASK;
+ data = 0x5c << HPIPE_OS_PH_OFFSET_OFFSET;
+ mask |= HPIPE_OS_PH_OFFSET_FORCE_MASK;
+ data |= 0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+ mask = HPIPE_OS_PH_VALID_MASK;
+ data = 0x1 << HPIPE_OS_PH_VALID_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+ mask = HPIPE_OS_PH_VALID_MASK;
+ data = 0x0 << HPIPE_OS_PH_VALID_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+
+ /* Set G1 TX amplitude and TX post emphasis value */
+ mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
+ data = 0x8 << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+ mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
+ data |= 0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
+ mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+ data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+ mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
+ data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
+
+ /* Set G2 TX amplitude and TX post emphasis value */
+ mask = HPIPE_G2_SET_0_G2_TX_AMP_MASK;
+ data = 0xa << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET;
+ mask |= HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK;
+ data |= 0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET;
+ mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_MASK;
+ data |= 0x2 << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET;
+ mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK;
+ data |= 0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SET_0_REG, data, mask);
+
+ /* Set G3 TX amplitude and TX post emphasis value */
+ mask = HPIPE_G3_SET_0_G3_TX_AMP_MASK;
+ data = 0xe << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET;
+ mask |= HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK;
+ data |= 0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET;
+ mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_MASK;
+ data |= 0x6 << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET;
+ mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK;
+ data |= 0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET;
+ mask |= HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK;
+ data |= 0x4 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET;
+ mask |= HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK;
+ data |= 0x0 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SET_0_REG, data, mask);
+
+ /* SERDES External Configuration 2 register */
+ mask = SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK;
+ data = 0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET;
+ reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
/* DFE reset sequence */
reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
@@ -907,8 +1133,8 @@ static int comphy_sgmii_power_up(u32 lane, u32 sgmii_speed,
return ret;
}
-static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
- void __iomem *comphy_base)
+static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base,
+ void __iomem *comphy_base, u32 speed)
{
u32 mask, data, ret = 1;
void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane);
@@ -963,7 +1189,9 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
debug("stage: Comphy configuration\n");
/* set reference clock */
mask = HPIPE_MISC_ICP_FORCE_MASK;
- data = 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
+ data = (speed == PHY_SPEED_5_15625G) ?
+ (0x0 << HPIPE_MISC_ICP_FORCE_OFFSET) :
+ (0x1 << HPIPE_MISC_ICP_FORCE_OFFSET);
mask |= HPIPE_MISC_REFCLK_SEL_MASK;
data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
@@ -988,6 +1216,22 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+ /* Transmitter/Receiver Speed Divider Force */
+ if (speed == PHY_SPEED_5_15625G) {
+ mask = HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK;
+ data = 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET;
+ mask |= HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK;
+ data |= 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET;
+ mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK;
+ data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET;
+ mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK;
+ data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET;
+ } else {
+ mask = HPIPE_TXDIGCK_DIV_FORCE_MASK;
+ data = 0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET;
+ }
+ reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask);
+
/* Set analog paramters from ETP(HW) */
debug("stage: Analog paramters from ETP(HW)\n");
/* SERDES External Configuration 2 */
@@ -999,10 +1243,15 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
/* 0xd-G1_Setting_0 */
- mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
- data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
- mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
- data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+ if (speed == PHY_SPEED_5_15625G) {
+ mask = HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+ data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+ } else {
+ mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
+ data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+ mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+ data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+ }
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
/* Genration 1 setting 2 (G1_Setting_2) */
mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
@@ -1027,13 +1276,27 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask);
/* 0xE-G1_Setting_1 */
- mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
- data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
- mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
- data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
- mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
- data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+ mask = HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
+ data = 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+ if (speed == PHY_SPEED_5_15625G) {
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+ } else {
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+ data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+ data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+ data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+ data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+ }
reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
/* 0xA-DFE_Reg3 */
mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
@@ -1048,8 +1311,74 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base,
/* Genration 1 setting 3 (G1_Setting_3) */
mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK;
data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET;
+ if (speed == PHY_SPEED_5_15625G) {
+ /* Force FFE (Feed Forward Equalization) to 5G */
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+ data |= 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+ data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+ data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+ }
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+ /* Connfigure RX training timer */
+ mask = HPIPE_RX_TRAIN_TIMER_MASK;
+ data = 0x13 << HPIPE_RX_TRAIN_TIMER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
+
+ /* Enable TX train peak to peak hold */
+ mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
+ data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
+
+ /* Configure TX preset index */
+ mask = HPIPE_TX_PRESET_INDEX_MASK;
+ data = 0x2 << HPIPE_TX_PRESET_INDEX_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_PRESET_INDEX_REG, data, mask);
+
+ /* Disable pattern lock lost timeout */
+ mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+ data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+ /* Configure TX training pattern and TX training 16bit auto */
+ mask = HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK;
+ data = 0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET;
+ mask |= HPIPE_TX_TRAIN_PAT_SEL_MASK;
+ data |= 0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
+
+ /* Configure Training patten number */
+ mask = HPIPE_TRAIN_PAT_NUM_MASK;
+ data = 0x88 << HPIPE_TRAIN_PAT_NUM_OFFSET;
+ reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_0_REG, data, mask);
+
+ /* Configure differencial manchester encoter to ethernet mode */
+ mask = HPIPE_DME_ETHERNET_MODE_MASK;
+ data = 0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DME_REG, data, mask);
+
+ /* Configure VDD Continuous Calibration */
+ mask = HPIPE_CAL_VDD_CONT_MODE_MASK;
+ data = 0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_0_REG, data, mask);
+
+ /* Trigger sampler enable pulse (by toggleing the bit) */
+ mask = HPIPE_RX_SAMPLER_OS_GAIN_MASK;
+ data = 0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET;
+ mask |= HPIPE_SMAPLER_MASK;
+ data |= 0x1 << HPIPE_SMAPLER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+ mask = HPIPE_SMAPLER_MASK;
+ data = 0x0 << HPIPE_SMAPLER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+ /* Set External RX Regulator Control */
+ mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+ data = 0x1A << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
/* SERDES External Configuration */
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
@@ -1301,7 +1630,7 @@ static void comphy_utmi_power_down(u32 utmi_index, void __iomem *utmi_base_addr,
* If UTMI connected to USB Device, configure mux prior to PHY init
* (Device can be connected to UTMI0 or to UTMI1)
*/
- if (utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) {
+ if (utmi_phy_port == UTMI_PHY_TO_USB3_DEVICE0) {
debug("stage: UTMI %d - Enable Device mode and configure UTMI mux\n",
utmi_index);
/* USB3 Device UTMI enable */
@@ -1493,7 +1822,8 @@ static void comphy_utmi_phy_init(u32 utmi_phy_count,
continue;
}
printf("UTMI PHY %d initialized to ", i);
- if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0)
+ if (cp110_utmi_data[i].utmi_phy_port ==
+ UTMI_PHY_TO_USB3_DEVICE0)
printf("USB Device\n");
else
printf("USB Host%d\n",
@@ -1659,6 +1989,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
}
switch (ptr_comphy_map->type) {
case PHY_TYPE_UNCONNECTED:
+ case PHY_TYPE_IGNORE:
continue;
break;
case PHY_TYPE_PEX0:
@@ -1667,6 +1998,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
case PHY_TYPE_PEX3:
ret = comphy_pcie_power_up(
lane, pcie_width, ptr_comphy_map->clk_src,
+ serdes_map->end_point,
hpipe_base_addr, comphy_base_addr);
break;
case PHY_TYPE_SATA0:
@@ -1675,7 +2007,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
case PHY_TYPE_SATA3:
ret = comphy_sata_power_up(
lane, hpipe_base_addr, comphy_base_addr,
- ptr_chip_cfg->comphy_index);
+ ptr_chip_cfg->cp_index);
break;
case PHY_TYPE_USB3_HOST0:
case PHY_TYPE_USB3_HOST1:
@@ -1696,9 +2028,10 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
lane, ptr_comphy_map->speed, hpipe_base_addr,
comphy_base_addr);
break;
- case PHY_TYPE_KR:
- ret = comphy_kr_power_up(lane, hpipe_base_addr,
- comphy_base_addr);
+ case PHY_TYPE_SFI:
+ ret = comphy_sfi_power_up(lane, hpipe_base_addr,
+ comphy_base_addr,
+ ptr_comphy_map->speed);
break;
case PHY_TYPE_RXAUI0:
case PHY_TYPE_RXAUI1:
@@ -1712,7 +2045,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
}
if (ret == 0) {
/*
- * If interface wans't initialiuzed, set the lane to
+ * If interface wans't initialized, set the lane to
* PHY_TYPE_UNCONNECTED state.
*/
ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
diff --git a/drivers/phy/marvell/comphy_hpipe.h b/drivers/phy/marvell/comphy_hpipe.h
index 179e910a0c..fbceb2a403 100644
--- a/drivers/phy/marvell/comphy_hpipe.h
+++ b/drivers/phy/marvell/comphy_hpipe.h
@@ -49,6 +49,9 @@
#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET 4
#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK \
(0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET)
+#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET 7
+#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK \
+ (0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET)
#define SD_EXTERNAL_STATUS0_REG 0x18
#define SD_EXTERNAL_STATUS0_PLL_TX_OFFSET 2
@@ -105,9 +108,15 @@
#define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET 1
#define HPIPE_G1_SET_0_G1_TX_AMP_MASK \
(0x1f << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET 6
+#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK \
+ (0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET)
#define HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET 7
#define HPIPE_G1_SET_0_G1_TX_EMPH1_MASK \
(0xf << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET 11
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK \
+ (0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET)
#define HPIPE_G1_SET_1_REG 0x038
#define HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET 0
@@ -116,22 +125,96 @@
#define HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET 3
#define HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK \
(0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET 6
+#define HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK \
+ (0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET 8
+#define HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK \
+ (0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET)
#define HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET 10
#define HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK \
(0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET)
-#define HPIPE_G2_SETTINGS_1_REG 0x040
+#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET 11
+#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK \
+ (0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET)
-#define HPIPE_G3_SETTINGS_1_REG 0x048
-#define HPIPE_G3_RX_SELMUPI_OFFSET 0
-#define HPIPE_G3_RX_SELMUPI_MASK \
- (0x7 << HPIPE_G3_RX_SELMUPI_OFFSET)
-#define HPIPE_G3_RX_SELMUPF_OFFSET 3
-#define HPIPE_G3_RX_SELMUPF_MASK \
- (0x7 << HPIPE_G3_RX_SELMUPF_OFFSET)
-#define HPIPE_G3_SETTING_BIT_OFFSET 13
-#define HPIPE_G3_SETTING_BIT_MASK \
- (0x1 << HPIPE_G3_SETTING_BIT_OFFSET)
+#define HPIPE_G2_SET_0_REG 0x3c
+#define HPIPE_G2_SET_0_G2_TX_AMP_OFFSET 1
+#define HPIPE_G2_SET_0_G2_TX_AMP_MASK \
+ (0x1f << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET 6
+#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK \
+ (0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET 7
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_MASK \
+ (0xf << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET 11
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK \
+ (0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET)
+
+#define HPIPE_G2_SET_1_REG 0x040
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET 0
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK \
+ (0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET 3
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK \
+ (0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET 6
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK \
+ (0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET 8
+#define HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK \
+ (0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET 10
+#define HPIPE_G2_SET_1_G2_RX_DFE_EN_MASK \
+ (0x1 << HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET 11
+#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK \
+ (0x3 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET)
+
+#define HPIPE_G3_SET_0_REG 0x44
+#define HPIPE_G3_SET_0_G3_TX_AMP_OFFSET 1
+#define HPIPE_G3_SET_0_G3_TX_AMP_MASK \
+ (0x1f << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET 6
+#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK \
+ (0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET 7
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_MASK \
+ (0xf << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET 11
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK \
+ (0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET 12
+#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK \
+ (0x7 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET 15
+#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK \
+ (0x1 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET)
+
+#define HPIPE_G3_SET_1_REG 0x048
+#define HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET 0
+#define HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK \
+ (0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET 3
+#define HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK \
+ (0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET 6
+#define HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK \
+ (0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET 8
+#define HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK \
+ (0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET 10
+#define HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK \
+ (0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET 11
+#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK \
+ (0x3 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET)
+#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET 13
+#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK \
+ (0x1 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET)
#define HPIPE_LOOPBACK_REG 0x08c
#define HPIPE_LOOPBACK_SEL_OFFSET 1
@@ -144,6 +227,9 @@
#define HPIPE_INTERFACE_GEN_MAX_OFFSET 10
#define HPIPE_INTERFACE_GEN_MAX_MASK \
(0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET 12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK \
+ (0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET 14
#define HPIPE_INTERFACE_LINK_TRAIN_MASK \
(0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
@@ -166,6 +252,16 @@
#define HPIPE_VTHIMPCAL_CTRL_REG 0x104
+#define HPIPE_VDD_CAL_CTRL_REG 0x114
+#define HPIPE_EXT_SELLV_RXSAMPL_OFFSET 5
+#define HPIPE_EXT_SELLV_RXSAMPL_MASK \
+ (0x1f << HPIPE_EXT_SELLV_RXSAMPL_OFFSET)
+
+#define HPIPE_VDD_CAL_0_REG 0x108
+#define HPIPE_CAL_VDD_CONT_MODE_OFFSET 15
+#define HPIPE_CAL_VDD_CONT_MODE_MASK \
+ (0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET)
+
#define HPIPE_PCIE_REG0 0x120
#define HPIPE_PCIE_IDLE_SYNC_OFFSET 12
#define HPIPE_PCIE_IDLE_SYNC_MASK \
@@ -212,9 +308,29 @@
#define HPIPE_PWR_CTR_SFT_RST_MASK \
(0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_REG 0x154
+#define HPIPE_TXDIGCK_DIV_FORCE_OFFSET 7
+#define HPIPE_TXDIGCK_DIV_FORCE_MASK \
+ (0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET 8
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK \
+ (0x3 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET 10
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK \
+ (0x1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET 13
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK \
+ (0x3 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET 15
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK \
+ (0x1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET)
+
#define HPIPE_PLLINTP_REG1 0x150
#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG 0x16C
+#define HPIPE_RX_SAMPLER_OS_GAIN_OFFSET 6
+#define HPIPE_RX_SAMPLER_OS_GAIN_MASK \
+ (0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET)
#define HPIPE_SMAPLER_OFFSET 12
#define HPIPE_SMAPLER_MASK \
(0x1 << HPIPE_SMAPLER_OFFSET)
@@ -227,12 +343,54 @@
#define HPIPE_TX_REG1_SLC_EN_MASK \
(0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET)
-#define HPIPE_PWR_CTR_DTL_REG 0x184
-#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET 2
-#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK \
+#define HPIPE_PWR_CTR_DTL_REG 0x184
+#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET 0
+#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK \
+ (0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET 1
+#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK \
+ (0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET 2
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK \
(0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET 4
+#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK \
+ (0x7 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET)
+#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET 10
+#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK \
+ (0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET 12
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_MASK \
+ (0x3 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET 14
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK \
+ (1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET)
-#define HPIPE_RX_REG3 0x188
+#define HPIPE_PHASE_CONTROL_REG 0x188
+#define HPIPE_OS_PH_OFFSET_OFFSET 0
+#define HPIPE_OS_PH_OFFSET_MASK \
+ (0x7f << HPIPE_OS_PH_OFFSET_OFFSET)
+#define HPIPE_OS_PH_OFFSET_FORCE_OFFSET 7
+#define HPIPE_OS_PH_OFFSET_FORCE_MASK \
+ (0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET)
+#define HPIPE_OS_PH_VALID_OFFSET 8
+#define HPIPE_OS_PH_VALID_MASK \
+ (0x1 << HPIPE_OS_PH_VALID_OFFSET)
+
+#define HPIPE_FRAME_DETECT_CTRL_0_REG 0x214
+#define HPIPE_TRAIN_PAT_NUM_OFFSET 0x7
+#define HPIPE_TRAIN_PAT_NUM_MASK \
+ (0x1FF << HPIPE_TRAIN_PAT_NUM_OFFSET)
+
+#define HPIPE_FRAME_DETECT_CTRL_3_REG 0x220
+#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET 12
+#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK \
+ (0x1 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET)
+
+#define HPIPE_DME_REG 0x228
+#define HPIPE_DME_ETHERNET_MODE_OFFSET 7
+#define HPIPE_DME_ETHERNET_MODE_MASK \
+ (0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET)
#define HPIPE_TX_TRAIN_CTRL_0_REG 0x268
#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET 15
@@ -259,6 +417,9 @@
#define HPIPE_PCIE_REG3 0x290
#define HPIPE_TX_TRAIN_CTRL_5_REG 0x2A4
+#define HPIPE_RX_TRAIN_TIMER_OFFSET 0
+#define HPIPE_RX_TRAIN_TIMER_MASK \
+ (0x3ff << HPIPE_RX_TRAIN_TIMER_OFFSET)
#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET 11
#define HPIPE_TX_TRAIN_START_SQ_EN_MASK \
(0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET)
@@ -279,6 +440,23 @@
#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET 7
#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK \
(0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET)
+#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET 8
+#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK \
+ (0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET)
+#define HPIPE_TX_TRAIN_PAT_SEL_OFFSET 9
+#define HPIPE_TX_TRAIN_PAT_SEL_MASK \
+ (0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET)
+
+#define HPIPE_CDR_CONTROL_REG 0x418
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET 12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK \
+ (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET 9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK \
+ (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET 6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK \
+ (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
#define HPIPE_TX_TRAIN_CTRL_11_REG 0x438
#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET 6
@@ -291,10 +469,25 @@
#define HPIPE_TX_SWEEP_PRESET_EN_MASK \
(0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)
-#define HPIPE_G1_SETTINGS_3_REG 0x440
-#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET 9
-#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK \
+#define HPIPE_G1_SETTINGS_3_REG 0x440
+#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET 0
+#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK \
+ (0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET 4
+#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK \
+ (0x7 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET 7
+#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK \
+ (0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET 9
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK \
(0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET 12
+#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK \
+ (0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET 14
+#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK \
+ (0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET)
#define HPIPE_G1_SETTINGS_4_REG 0x444
#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET 8
@@ -302,9 +495,22 @@
(0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET)
#define HPIPE_G2_SETTINGS_3_REG 0x448
-#define HPIPE_G2_SETTINGS_4_REG 0x44C
+
+#define HPIPE_G2_SETTINGS_4_REG 0x44c
+#define HPIPE_G2_DFE_RES_OFFSET 8
+#define HPIPE_G2_DFE_RES_MASK \
+ (0x3 << HPIPE_G2_DFE_RES_OFFSET)
#define HPIPE_G3_SETTING_3_REG 0x450
+#define HPIPE_G3_FFE_CAP_SEL_OFFSET 0
+#define HPIPE_G3_FFE_CAP_SEL_MASK \
+ (0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G3_FFE_RES_SEL_OFFSET 4
+#define HPIPE_G3_FFE_RES_SEL_MASK \
+ (0x7 << HPIPE_G3_FFE_RES_SEL_OFFSET)
+#define HPIPE_G3_FFE_SETTING_FORCE_OFFSET 7
+#define HPIPE_G3_FFE_SETTING_FORCE_MASK \
+ (0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET)
#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET 12
#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK \
(0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET)
@@ -317,6 +523,16 @@
#define HPIPE_G3_DFE_RES_MASK \
(0x3 << HPIPE_G3_DFE_RES_OFFSET)
+#define HPIPE_TX_PRESET_INDEX_REG 0x468
+#define HPIPE_TX_PRESET_INDEX_OFFSET 0
+#define HPIPE_TX_PRESET_INDEX_MASK \
+ (0xf << HPIPE_TX_PRESET_INDEX_OFFSET)
+
+#define HPIPE_DFE_CONTROL_REG 0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET 14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK \
+ (0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
#define HPIPE_DFE_CTRL_28_REG 0x49C
#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET 7
#define HPIPE_DFE_CTRL_28_PIPE4_MASK \
@@ -327,6 +543,11 @@
#define HPIPE_G1_SETTING_5_G1_ICP_MASK \
(0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET)
+#define HPIPE_G3_SETTING_5_REG 0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET 0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK \
+ (0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
#define HPIPE_LANE_CONFIG0_REG 0x600
#define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET 0
#define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK \
@@ -349,6 +570,9 @@
#define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET 0
#define HPIPE_LANE_CFG4_DFE_CTRL_MASK \
(0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET 3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK \
+ (0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
#define HPIPE_LANE_CFG4_DFE_OVER_OFFSET 6
#define HPIPE_LANE_CFG4_DFE_OVER_MASK \
(0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET)
@@ -366,6 +590,17 @@
#define HPIPE_CFG_UPDATE_POLARITY_MASK \
(0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG 0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET 0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK \
+ (0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET 1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK \
+ (0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET 2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK \
+ (0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
#define HPIPE_RST_CLK_CTRL_REG 0x704
#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET 0
#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK \
diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c
index 1dc7426b63..b036fb13b9 100644
--- a/drivers/phy/marvell/comphy_mux.c
+++ b/drivers/phy/marvell/comphy_mux.c
@@ -27,6 +27,10 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
for (lane = 0; lane < comphy_max_lanes;
lane++, comphy_map_data++, mux_data++) {
+ /* Don't check ignored COMPHYs */
+ if (comphy_map_data->type == PHY_TYPE_IGNORE)
+ continue;
+
mux_opt = mux_data->mux_values;
for (opt = 0, valid = 0; opt < mux_data->max_lane_values;
opt++, mux_opt++) {
@@ -83,6 +87,9 @@ static void comphy_mux_reg_write(struct comphy_mux_data *mux_data,
for (lane = 0; lane < comphy_max_lanes;
lane++, comphy_map_data++, mux_data++) {
+ if (comphy_map_data->type == PHY_TYPE_IGNORE)
+ continue;
+
offset = lane * bitcount;
mask = (((1 << bitcount) - 1) << offset);
value = (comphy_mux_get_mux_value(mux_data,
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index ba5c0901b1..1cdefa0549 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -27,13 +27,6 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_PCI
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE 0x0
-#define CONFIG_SYS_I2C_SPEED 100000
-
/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_BUS 1
#define CONFIG_SF_DEFAULT_SPEED 1000000
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 8ee5f27a97..9d3aeefcd0 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -76,11 +76,22 @@
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
/* Environment in SPI NOR flash */
+#ifdef CONFIG_MVEBU_SPI_BOOT
#define CONFIG_ENV_IS_IN_SPI_FLASH
+/* Environment in NAND flash */
+#elif defined(CONFIG_MVEBU_NAND_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#endif
+
#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+
/*
* Ethernet Driver configuration
*/
diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h
index a3a6b405eb..0983116038 100644
--- a/include/dt-bindings/comphy/comphy_data.h
+++ b/include/dt-bindings/comphy/comphy_data.h
@@ -13,10 +13,11 @@
#define PHY_SPEED_3G 3
#define PHY_SPEED_3_125G 4
#define PHY_SPEED_5G 5
-#define PHY_SPEED_6G 6
-#define PHY_SPEED_6_25G 7
-#define PHY_SPEED_10_3125G 8
-#define PHY_SPEED_MAX 9
+#define PHY_SPEED_5_15625G 6
+#define PHY_SPEED_6G 7
+#define PHY_SPEED_6_25G 8
+#define PHY_SPEED_10_3125G 9
+#define PHY_SPEED_MAX 10
#define PHY_SPEED_INVALID 0xff
#define PHY_TYPE_UNCONNECTED 0
@@ -42,8 +43,9 @@
#define PHY_TYPE_XAUI3 20
#define PHY_TYPE_RXAUI0 21
#define PHY_TYPE_RXAUI1 22
-#define PHY_TYPE_KR 23
-#define PHY_TYPE_MAX 24
+#define PHY_TYPE_SFI 23
+#define PHY_TYPE_IGNORE 24
+#define PHY_TYPE_MAX 25
#define PHY_TYPE_INVALID 0xff
#define PHY_POLARITY_NO_INVERT 0
@@ -52,9 +54,9 @@
#define PHY_POLARITY_ALL_INVERT \
(PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT)
-#define UTMI_PHY_TO_USB_HOST0 0
-#define UTMI_PHY_TO_USB_HOST1 1
-#define UTMI_PHY_TO_USB_DEVICE0 2
+#define UTMI_PHY_TO_USB3_HOST0 0
+#define UTMI_PHY_TO_USB3_HOST1 1
+#define UTMI_PHY_TO_USB3_DEVICE0 2
#define UTMI_PHY_INVALID 0xff
#endif /* _COMPHY_DATA_H_ */