Merge git://git.denx.de/u-boot-marvell

- Enable network interface on clearfog_gt_8k (Baruch)
- Fix dreamplug boot by adding an spi0 alias to the DT (Chris)
- Fix / enhance Marvell ddr3 setup / parameters (Chris)
- Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris)
- Enable SPL_FLASH_BAR on db-88f6820-amc (Chris)
- Use correct pcie controller name in Armada-38x dts files (Chris)
- Disable d-cache on Kirkwood platforms as currently needed (Chris)
- Add a more descriptive comment to pci_mvebu.c (Stefan)
- Update Marvell maintainers entry (Stefan)

arch/arm/dts/armada-385-amc.dts

@@ -133,7 +133,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			pcie@1,0 {
 				/* Port 0, Lane 0 */

arch/arm/dts/armada-385-turris-omnia.dts

@@ -96,7 +96,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			pcie@1,0 {

arch/arm/dts/armada-388-clearfog.dts

@@ -124,7 +124,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * The two PCIe units are accessible through

arch/arm/dts/armada-388-gp.dts

@@ -234,7 +234,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * One PCIe units is accessible through

arch/arm/dts/armada-38x-controlcenterdc.dts

@@ -243,7 +243,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * The two PCIe units are accessible through

arch/arm/dts/kirkwood-dreamplug.dts

@@ -18,6 +18,10 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		spi0 = &spi0;
+	};
+
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_led_bluetooth: pmx-led-bluetooth {

arch/arm/mach-kirkwood/include/mach/config.h

@@ -26,6 +26,12 @@
 #define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
 #define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 #define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
+/*
+ * Disable the dcache. Currently the network driver (mvgbe.c) and USB
+ * EHCI driver (ehci-marvell.c) and possibly others rely on the data
+ * cache being disabled.
+ */
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * By default kwbimage.cfg from board specific folder is used