leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

armv8: lx2162aqds: Add support for LX2162AQDS platform

Browse Source 
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
This commit is contained in:
Meenakshi Aggarwal 2020-12-04 20:17:28 +05:30 committed by Priyanka Jain
parent 3a187cff7a
commit 9ed303dfa9
28 changed files with 1935 additions and 150 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/Kconfig
View File

@ -1326,6 +1326,18 @@ config TARGET_LX2160AQDS
is a high-performance development platform that supports the
QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
config TARGET_LX2162AQDS
bool "Support lx2162aqds"
select ARCH_LX2162A
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for NXP LX2162AQDS platform.
The lx2162aqds support is based on LX2160A Layerscape Architecture processor.
config TARGET_HIKEY
bool "Support HiKey 96boards Consumer Edition Platform"
select ARM64

6
arch/arm/dts/Makefile
View File

@ -414,7 +414,11 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-lx2160a-qds-19-x-x.dtb \
fsl-lx2160a-qds-19-11-x.dtb \
fsl-lx2160a-qds-20-x-x.dtb \
fsl-lx2160a-qds-20-11-x.dtb
fsl-lx2160a-qds-20-11-x.dtb \
fsl-lx2162a-qds.dtb\
fsl-lx2162a-qds-17-x.dtb\
fsl-lx2162a-qds-18-x.dtb\
fsl-lx2162a-qds-20-x.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \

3
arch/arm/dts/fsl-lx2160a-qds.dts
View File

@ -13,7 +13,4 @@
/ {
model = "NXP Layerscape LX2160AQDS Board";
compatible = "fsl,lx2160aqds", "fsl,lx2160a";
aliases {
spi0 = &fspi;
};
};

22
arch/arm/dts/fsl-lx2160a-qds.dtsi
View File

@ -2,12 +2,18 @@
/*
* NXP LX2160AQDS common device tree source
*
* Copyright 2018-2019 NXP
* Copyright 2018-2020 NXP
*
*/
#include "fsl-lx2160a.dtsi"
/ {
aliases {
spi0 = &fspi;
};
};
&dpmac17 {
status = "okay";
phy-handle = <&rgmii_phy1>;
@ -251,6 +257,20 @@
};
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
};
&sata0 {
status = "okay";
};

17
arch/arm/dts/fsl-lx2162a-qds-17-x.dts Normal file
View File

@ -0,0 +1,17 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source for SERDES protocol 17.x
*
* Copyright 2020 NXP
*
*/
/dts-v1/;
#include "fsl-lx2162a-qds-sd1-17.dtsi"
/ {
model = "NXP Layerscape LX2160AQDS Board (DTS 17.x)";
compatible = "fsl,lx2162aqds", "fsl,lx2160a";
};

17
arch/arm/dts/fsl-lx2162a-qds-18-x.dts Normal file
View File

@ -0,0 +1,17 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source for SERDES protocol 18.x
*
* Copyright 2020 NXP
*
*/
/dts-v1/;
#include "fsl-lx2162a-qds-sd1-18.dtsi"
/ {
model = "NXP Layerscape LX2160AQDS Board (DTS 18.x)";
compatible = "fsl,lx2162aqds", "fsl,lx2160a";
};

17
arch/arm/dts/fsl-lx2162a-qds-20-x.dts Normal file
View File

@ -0,0 +1,17 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source for SERDES protocol 20.x
*
* Copyright 2020 NXP
*
*/
/dts-v1/;
#include "fsl-lx2162a-qds-sd1-20.dtsi"
/ {
model = "NXP Layerscape LX2160AQDS Board (DTS 20.x)";
compatible = "fsl,lx2162aqds", "fsl,lx2160a";
};

58
arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi Normal file
View File

@ -0,0 +1,58 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 17
*
* Some assumptions are made:
* * mezzanine card M8 is connected to IO SLOT1 (25g-aui for DPMAC 3,4,5,6)
*
* Copyright 2020 NXP
*
*/
#include "fsl-lx2160a-qds.dtsi"
&dpmac3 {
status = "okay";
phy-handle = <&inphi_phy0>;
phy-connection-type = "25g-aui";
};
&dpmac4 {
status = "okay";
phy-handle = <&inphi_phy1>;
phy-connection-type = "25g-aui";
};
&dpmac5 {
status = "okay";
phy-handle = <&inphi_phy2>;
phy-connection-type = "25g-aui";
};
&dpmac6 {
status = "okay";
phy-handle = <&inphi_phy3>;
phy-connection-type = "25g-aui";
};
&emdio1_slot1 {
inphi_phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x0>;
};
inphi_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x1>;
};
inphi_phy2: ethernet-phy@2 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x2>;
};
inphi_phy3: ethernet-phy@3 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x3>;
};
};

61
arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi Normal file
View File

@ -0,0 +1,61 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 18
*
* Some assumptions are made:
* * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
* * mezzanine card M13/M8 is connected to IO SLOT6 (25g-aui for DPMAC 5,6)
*
* Copyright 2020 NXP
*
*/
#include "fsl-lx2160a-qds.dtsi"
&dpmac3 {
status = "okay";
phy-handle = <&aquantia_phy1>;
phy-connection-type = "usxgmii";
};
&dpmac4 {
status = "okay";
phy-handle = <&aquantia_phy2>;
phy-connection-type = "usxgmii";
};
&dpmac5 {
status = "okay";
phy-handle = <&inphi_phy0>;
phy-connection-type = "25g-aui";
};
&dpmac6 {
status = "okay";
phy-handle = <&inphi_phy1>;
phy-connection-type = "25g-aui";
};
&emdio1_slot1 {
aquantia_phy1: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x0>;
};
aquantia_phy2: ethernet-phy@5 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x1>;
};
};
&emdio1_slot6 {
inphi_phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x0>;
};
inphi_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x1>;
};
};

26
arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi Normal file
View File

@ -0,0 +1,26 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 20
*
* Some assumptions are made:
* * Mezzanine card M8 is connected to IO SLOT1
* (xlaui4 for DPMAC 1)
*
* Copyright 2020 NXP
*
*/
#include "fsl-lx2160a-qds.dtsi"
&dpmac1 {
status = "okay";
phy-handle = <&cortina_phy1_0>;
phy-connection-type = "xlaui4";
};
&emdio1_slot1 {
cortina_phy1_0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x0>;
};
};

34
arch/arm/dts/fsl-lx2162a-qds.dts Normal file
View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LX2162AQDS device tree source
*
* Copyright 2020 NXP
*
*/
/dts-v1/;
#include "fsl-lx2160a-qds.dtsi"
/ {
model = "NXP Layerscape LX2162AQDS Board";
compatible = "fsl,lx2162aqds", "fsl,lx2160a";
aliases {
pcie@3500000 {
status = "disabled";
};
pcie@3800000 {
status = "disabled";
};
pcie@3900000 {
status = "disabled";
};
};
};
&usb1 {
status = "disabled";
};

25
board/freescale/common/qixis.h
View File

@ -141,4 +141,29 @@ void qixis_write_i2c(unsigned int reg, u8 value);
#define QIXIS_EVDD_BY_SDHC_VS 0x0c
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \
defined(CONFIG_TARGET_LX2160ARDB)
#define QIXIS_XMAP_MASK 0x07
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x20
#define QIXIS_LBMAP_QSPI 0x00
#define QIXIS_RCW_SRC_QSPI 0xff
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_LBMAP_MASK 0x0f
#define QIXIS_LBMAP_SD
#define QIXIS_LBMAP_EMMC
#define QIXIS_RCW_SRC_SD 0x08
#define QIXIS_RCW_SRC_EMMC 0x09
#define NON_EXTENDED_DUTCFG
#endif
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
#define QIXIS_SDID_MASK 0x07
#define QIXIS_ESDHC_NO_ADAPTER 0x7
#endif
#endif

30
board/freescale/common/vid.h
View File

@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
*/
#ifndef __VID_H_
@ -37,6 +38,35 @@
*/
#define EN_WRITE_ALL_CMD (0)
#ifdef CONFIG_TARGET_LX2160ARDB
/* The lowest and highest voltage allowed*/
#define VDD_MV_MIN 775
#define VDD_MV_MAX 855
#endif
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
/* The lowest and highest voltage allowed*/
#define VDD_MV_MIN 775
#define VDD_MV_MAX 925
#endif
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \
defined(CONFIG_TARGET_LX2160ARDB)
/* PM Bus commands code for LTC3882*/
#define PWM_CHANNEL0 0x0
#define PMBUS_CMD_PAGE 0x0
#define PMBUS_CMD_READ_VOUT 0x8B
#define PMBUS_CMD_VOUT_COMMAND 0x21
#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
/* Voltage monitor on channel 2*/
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
#define I2C_VOL_MONITOR_ADDR 0x63
#define I2C_MUX_CH_VOL_MONITOR 0xA
#endif
int adjust_vdd(ulong vdd_override);
#endif /* __VID_H_ */

16
board/freescale/lx2160a/Kconfig
View File

@ -32,3 +32,19 @@ config SYS_CONFIG_NAME
source "board/freescale/common/Kconfig"
endif
if TARGET_LX2162AQDS
config SYS_BOARD
default "lx2160a"
config SYS_VENDOR
default "freescale"
config SYS_SOC
default "fsl-layerscape"
config SYS_CONFIG_NAME
default "lx2162aqds"
source "board/freescale/common/Kconfig"
endif

26
board/freescale/lx2160a/MAINTAINERS
View File

@ -1,4 +1,5 @@
LX2160ARDB BOARD
M: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
M: Priyanka Jain <priyanka.jain@nxp.com>
S: Maintained
F: board/freescale/lx2160a/
@ -14,6 +15,7 @@ S: Maintained
F: configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
LX2160AQDS BOARD
M: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
M: Pankaj Bansal <pankaj.bansal@nxp.com>
S: Maintained
F: board/freescale/lx2160a/eth_lx2160aqds.h
@ -25,3 +27,27 @@ LX2160AQDS_SECURE_BOOT BOARD
M: Udit Agarwal <udit.agarwal@nxp.com>
S: Maintained
F: configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
LX2162AQDS BOARD
M: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
S: Maintained
F: board/freescale/lx2160a/eth_lx2162aqds.h
F: include/configs/lx2162aqds.h
F: configs/lx2162aqds_tfa_defconfig
F: arch/arm/dts/fsl-lx2162a-qds.dts
F: arch/arm/dts/fsl-lx2162a-qds-17-x.dts
F: arch/arm/dts/fsl-lx2162a-qds-18-x.dts
F: arch/arm/dts/fsl-lx2162a-qds-20-x.dts
F: arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi
F: arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi
F: arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi
LX2162AQDS_SECURE_BOOT BOARD
M: Manish Tomar <Manish.Tomar@nxp.com>
S: Maintained
F: configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
LX2162AQDS_VERIFIED_BOOT BOARD
M: Manish Tomar <Manish.Tomar@nxp.com>
S: Maintained
F: configs/lx2162aqds_tfa_verified_boot_defconfig

1
board/freescale/lx2160a/Makefile
View File

@ -8,3 +8,4 @@ obj-y += lx2160a.o
obj-y += ddr.o
obj-$(CONFIG_TARGET_LX2160ARDB) += eth_lx2160ardb.o
obj-$(CONFIG_TARGET_LX2160AQDS) += eth_lx2160aqds.o
obj-$(CONFIG_TARGET_LX2162AQDS) += eth_lx2162aqds.o

132
board/freescale/lx2160a/README
View File

@ -195,3 +195,135 @@ SERDES3 |CARDS
|Connect I/O cable to IO_SLOT6(J125)
-------------------------------------------------------------------------
LX2162A SoC Overview
--------------------------------------
For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
LX2162AQDS board Overview
----------------------
DDR Memory
One ports of 72-bits (8-bits ECC) DDR4.
Each port supports four chip-selects and two DIMM
connectors. Data rate upto 2.9 GT/s.
SERDES ports
Two serdes controllers (12 lanes)
Serdes1: Supports two USXGMII connectors, each connected through
Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi
IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi
CS4223 phy.
Serdes2: Supports two PCIe x4 (Gen3) and one PCIe x8 (Gen3) connector,
four SATA 3.0 connectors
eSDHC
eSDHC1: Supports a SD connector for connecting SD cards
eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
Octal SPI (XSPI)
Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator
for off-board emulation
I2C All system devices on I2C1 multiplexed using PCA9547 multiplexer
Serial Ports
USB 3.0
One high speed USB 3.0 ports. First USB 3.0 port configured as Host
with Type-A connector, second USB 3.0 port configured as OTG with
micro-AB connector
Serial Ports Two UART ports
Ethernet Two RGMII interfaces
Debug ARM JTAG support
Booting Options
---------------
a) Flexspi boot
b) SD boot
c) eMMC boot
Memory map for Flexspi flash
----------------------------
Image Flash Offset
bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl) 0x00000000
fip.bin (bl31 + bl33(u-boot) +
header for Secure-boot(secure-boot only)) 0x00100000
Boot firmware Environment 0x00500000
DDR PHY Firmware (fip_ddr_all.bin) 0x00800000
DPAA2 MC Firmware 0x00A00000
DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
Kernel.itb 0x01000000
Memory map for sd/eMMC card
----------------------------
Image SD/eMMC card Offset
bl2_sd.pbl (RCW+PBI+bl2.pbl) 0x00008
fip.bin (bl31 + bl33(u-boot) +
header for Secure-boot(secure-boot only)) 0x00800
Boot firmware Environment 0x02800
DDR PHY Firmware (fip_ddr_all.bin) 0x04000
DPAA2 MC Firmware 0x05000
DPAA2 DPL 0x06800
DPAA2 DPC 0x07000
Kernel.itb 0x08000
Various Mezzanine cards and their connection for different SERDES protocols is
as below:
SERDES1 |CARDS
-----------------------------------------------------------------------
1 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
3 |Mezzanine:X-M11-USXGMII (29828)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
15 |Mezzanine:X-M8-50G (29734)
|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
17 |Mezzanine:X-M13-25G (32133)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
18 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125)
------------------------------------------------------------------------
20 |Mezzanine:X-M7-40G (29738)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J108)
------------------------------------------------------------------------
SERDES2 |CARDS
-----------------------------------------------------------------------
2 |Mezzanine:X-M6-PCIE-X8 (29737) *
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT3(J116)
------------------------------------------------------------------------
3 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT3(J116)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT4(J119)
------------------------------------------------------------------------
5 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT3(J116)
|Mezzanine:X-M5-SATA (29687)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT4(J119)
------------------------------------------------------------------------
11 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT7(J127)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT8(J131)
------------------------------------------------------------------------

3
board/freescale/lx2160a/eth_lx2160ardb.c
View File

@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
* Copyright 2018, 2020 NXP
*
*/
@ -19,6 +19,7 @@
#include <asm/arch/fsl_serdes.h>
#include <fsl-mc/fsl_mc.h>
#include <fsl-mc/ldpaa_wriop.h>
#include "lx2160a.h"
DECLARE_GLOBAL_DATA_PTR;

974
board/freescale/lx2160a/eth_lx2162aqds.c Normal file
View File

@ -0,0 +1,974 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2020 NXP
*
*/
#include <common.h>
#include <env.h>
#include <fdt_support.h>
#include <hwconfig.h>
#include <command.h>
#include <log.h>
#include <net.h>
#include <netdev.h>
#include <malloc.h>
#include <fsl_mdio.h>
#include <miiphy.h>
#include <phy.h>
#include <fm_eth.h>
#include <asm/io.h>
#include <exports.h>
#include <asm/arch/fsl_serdes.h>
#include <fsl-mc/fsl_mc.h>
#include <fsl-mc/ldpaa_wriop.h>
#include <linux/libfdt.h>
#include "../common/qixis.h"
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_DM_ETH
#define EMI_NONE 0
#define EMI1 1 /* Mdio Bus 1 */
#define EMI2 2 /* Mdio Bus 2 */
#if defined(CONFIG_FSL_MC_ENET)
enum io_slot {
IO_SLOT_NONE = 0,
IO_SLOT_1,
IO_SLOT_2,
IO_SLOT_3,
IO_SLOT_4,
IO_SLOT_5,
IO_SLOT_6,
IO_SLOT_7,
IO_SLOT_8,
EMI1_RGMII1,
EMI1_RGMII2,
IO_SLOT_MAX
};
struct lx2162a_qds_mdio {
enum io_slot ioslot : 4;
u8 realbusnum : 4;
struct mii_dev *realbus;
};
/* structure explaining the phy configuration on 8 lanes of a serdes*/
struct serdes_phy_config {
u8 serdes; /* serdes protocol */
struct phy_config {
u8 dpmacid;
/* -1 terminated array */
int phy_address[WRIOP_MAX_PHY_NUM + 1];
u8 mdio_bus;
enum io_slot ioslot;
} phy_config[SRDS_MAX_LANES];
};
/* Table defining the phy configuration on 8 lanes of a serdes.
* Various assumptions have been made while defining this table.
* e.g. for serdes1 protocol 19 it is being assumed that X-M11-USXGMII
* card is being used for dpmac 3-4. (X-M12-XFI could also have been used)
* And also that this card is connected to IO Slot 1 (could have been connected
* to any of the 8 IO slots (IO slot 1 - IO slot 8)).
* similarly, it is also being assumed that MDIO 1 is selected on X-M7-40G card
* used in serdes1 protocol 19 (could have selected MDIO 2)
* To override these settings "dpmac" environment variable can be used after
* defining "dpmac_override" in hwconfig environment variable.
* This table has limited serdes protocol entries. It can be expanded as per
* requirement.
*/
/*****************************************************************
*| SERDES_1 PROTOCOL | IO_SLOT | CARD |
******************************************************************
*| 2 | IO_SLOT_1 | M4-PCIE-SGMII |
*| 3 | IO_SLOT_1 | M11-USXGMII |
*| 15 | IO_SLOT_1 | M13-25G |
*| 17 | IO_SLOT_1 | M13-25G |
*| 18 | IO_SLOT_1 | M11-USXGMII |
*| | IO_SLOT_6 | M13-25G |
*| 20 | IO_SLOT_1 | M7-40G |
*****************************************************************
*/
static const struct serdes_phy_config serdes1_phy_config[] = {
{1, {} },
{2, {{WRIOP1_DPMAC3, {SGMII_CARD_PORT1_PHY_ADDR, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC4, {SGMII_CARD_PORT2_PHY_ADDR, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC5, {SGMII_CARD_PORT3_PHY_ADDR, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC6, {SGMII_CARD_PORT4_PHY_ADDR, -1},
EMI1, IO_SLOT_1} } },
{3, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
EMI1, IO_SLOT_1} } },
{15, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_1} } },
{17, {{WRIOP1_DPMAC3, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC4, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_1} } },
{18, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
EMI1, IO_SLOT_1},
{WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_6},
{WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
EMI1, IO_SLOT_6} } },
{20, {{WRIOP1_DPMAC1, {CORTINA_PHY_ADDR1, -1},
EMI1, IO_SLOT_1} } }
};
/*****************************************************************
*| SERDES_2 PROTOCOL | IO_SLOT | CARD |
******************************************************************
*| 2 | IO_SLOT_7 | M4-PCIE-SGMII |
*| | IO_SLOT_8 | M4-PCIE-SGMII |
*| 3 | IO_SLOT_7 | M4-PCIE-SGMII |
*| | IO_SLOT_8 | M4-PCIE-SGMII |
*| 5 | IO_SLOT_7 | M4-PCIE-SGMII |
*| 10 | IO_SLOT_7 | M4-PCIE-SGMII |
*| | IO_SLOT_8 | M4-PCIE-SGMII |
*| 11 | IO_SLOT_7 | M4-PCIE-SGMII |
*| | IO_SLOT_8 | M4-PCIE-SGMII |
*| 12 | IO_SLOT_7 | M4-PCIE-SGMII |
*| | IO_SLOT_8 | M4-PCIE-SGMII |
******************************************************************
*/
static const struct serdes_phy_config serdes2_phy_config[] = {
{2, {} },
{3, {} },
{5, {} },
{10, {{WRIOP1_DPMAC11, {SGMII_CARD_PORT1_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
EMI1, IO_SLOT_7} } },
{11, {{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC16, {SGMII_CARD_PORT2_PHY_ADDR, -1},
EMI1, IO_SLOT_8},
{WRIOP1_DPMAC13, {SGMII_CARD_PORT3_PHY_ADDR, -1},
EMI1, IO_SLOT_8},
{WRIOP1_DPMAC14, {SGMII_CARD_PORT4_PHY_ADDR, -1},
EMI1, IO_SLOT_8} } },
{12, {{WRIOP1_DPMAC11, {SGMII_CARD_PORT1_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
EMI1, IO_SLOT_7},
{WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
EMI1, IO_SLOT_7} } }
};
static inline
const struct phy_config *get_phy_config(u8 serdes,
const struct serdes_phy_config *table,
u8 table_size)
{
int i;
for (i = 0; i < table_size; i++) {
if (table[i].serdes == serdes)
return table[i].phy_config;
}
return NULL;
}
/* BRDCFG4 controls EMI routing for the board.
* Bits Function
* 7-6 EMI Interface #1 Primary Routing (CFG_MUX1_EMI1) (1.8V):
* EMI1 00= On-board PHY #1
* 01= On-board PHY #2
* 10= (reserved)
* 11= Slots 1..8 multiplexer and translator.
* 5-3 EMI Interface #1 Secondary Routing (CFG_MUX2_EMI1) (2.5V):
* EMI1X 000= Slot #1
* 001= Slot #2
* 010= Slot #3
* 011= Slot #4
* 100= Slot #5
* 101= Slot #6
* 110= Slot #7
* 111= Slot #8
* 2-0 EMI Interface #2 Routing (CFG_MUX_EMI2):
* EMI2 000= Slot #1 (secondary EMI)
* 001= Slot #2 (secondary EMI)
* 010= Slot #3 (secondary EMI)
* 011= Slot #4 (secondary EMI)
* 100= Slot #5 (secondary EMI)
* 101= Slot #6 (secondary EMI)
* 110= Slot #7 (secondary EMI)
* 111= Slot #8 (secondary EMI)
*/
static int lx2162a_qds_get_mdio_mux_val(u8 realbusnum, enum io_slot ioslot)
{
switch (realbusnum) {
case EMI1:
switch (ioslot) {
case EMI1_RGMII1:
return 0;
case EMI1_RGMII2:
return 0x40;
default:
return (((ioslot - 1) << BRDCFG4_EMI1SEL_SHIFT) | 0xC0);
}
break;
case EMI2:
return ((ioslot - 1) << BRDCFG4_EMI2SEL_SHIFT);
default:
return -1;
}
}
static void lx2162a_qds_mux_mdio(struct lx2162a_qds_mdio *priv)
{
u8 brdcfg4, mux_val, reg;
brdcfg4 = QIXIS_READ(brdcfg[4]);
reg = brdcfg4;
mux_val = lx2162a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot);
switch (priv->realbusnum) {
case EMI1:
brdcfg4 &= ~BRDCFG4_EMI1SEL_MASK;
brdcfg4 |= mux_val;
break;
case EMI2:
brdcfg4 &= ~BRDCFG4_EMI2SEL_MASK;
brdcfg4 |= mux_val;
break;
}
if (brdcfg4 ^ reg)
QIXIS_WRITE(brdcfg[4], brdcfg4);
}
static int lx2162a_qds_mdio_read(struct mii_dev *bus, int addr,
int devad, int regnum)
{
struct lx2162a_qds_mdio *priv = bus->priv;
lx2162a_qds_mux_mdio(priv);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int lx2162a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct lx2162a_qds_mdio *priv = bus->priv;
lx2162a_qds_mux_mdio(priv);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int lx2162a_qds_mdio_reset(struct mii_dev *bus)
{
struct lx2162a_qds_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static struct mii_dev *lx2162a_qds_mdio_init(u8 realbusnum, enum io_slot ioslot)
{
struct lx2162a_qds_mdio *pmdio;
struct mii_dev *bus;
/*should be within MDIO_NAME_LEN*/
char dummy_mdio_name[] = "LX2162A_QDS_MDIO1_IOSLOT1";
if (realbusnum == EMI2) {
if (ioslot < IO_SLOT_1 || ioslot > IO_SLOT_8) {
printf("invalid ioslot %d\n", ioslot);
return NULL;
}
} else if (realbusnum == EMI1) {
if (ioslot < IO_SLOT_1 || ioslot > EMI1_RGMII2) {
printf("invalid ioslot %d\n", ioslot);
return NULL;
}
} else {
printf("not supported real mdio bus %d\n", realbusnum);
return NULL;
}
if (ioslot == EMI1_RGMII1)
strcpy(dummy_mdio_name, "LX2162A_QDS_MDIO1_RGMII1");
else if (ioslot == EMI1_RGMII2)
strcpy(dummy_mdio_name, "LX2162A_QDS_MDIO1_RGMII2");
else
sprintf(dummy_mdio_name, "LX2162A_QDS_MDIO%d_IOSLOT%d",
realbusnum, ioslot);
bus = miiphy_get_dev_by_name(dummy_mdio_name);
if (bus)
return bus;
bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate %s bus\n", dummy_mdio_name);
return NULL;
}
pmdio = malloc(sizeof(*pmdio));
if (!pmdio) {
printf("Failed to allocate %s private data\n", dummy_mdio_name);
free(bus);
return NULL;
}
switch (realbusnum) {
case EMI1:
pmdio->realbus =
miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
break;
case EMI2:
pmdio->realbus =
miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
break;
}
if (!pmdio->realbus) {
printf("No real mdio bus num %d found\n", realbusnum);
free(bus);
free(pmdio);
return NULL;
}
pmdio->realbusnum = realbusnum;
pmdio->ioslot = ioslot;
bus->read = lx2162a_qds_mdio_read;
bus->write = lx2162a_qds_mdio_write;
bus->reset = lx2162a_qds_mdio_reset;
strcpy(bus->name, dummy_mdio_name);
bus->priv = pmdio;
if (!mdio_register(bus))
return bus;
printf("No bus with name %s\n", dummy_mdio_name);
free(bus);
free(pmdio);
return NULL;
}
static inline void do_phy_config(const struct phy_config *phy_config)
{
struct mii_dev *bus;
int i, phy_num, phy_address;
for (i = 0; i < SRDS_MAX_LANES; i++) {
if (!phy_config[i].dpmacid)
continue;
for (phy_num = 0;
phy_num < ARRAY_SIZE(phy_config[i].phy_address);
phy_num++) {
phy_address = phy_config[i].phy_address[phy_num];
if (phy_address == -1)
break;
wriop_set_phy_address(phy_config[i].dpmacid,
phy_num, phy_address);
}
/*Register the muxing front-ends to the MDIO buses*/
bus = lx2162a_qds_mdio_init(phy_config[i].mdio_bus,
phy_config[i].ioslot);
if (!bus)
printf("could not get bus for mdio %d ioslot %d\n",
phy_config[i].mdio_bus,
phy_config[i].ioslot);
else
wriop_set_mdio(phy_config[i].dpmacid, bus);
}
}
static inline void do_dpmac_config(int dpmac, const char *arg_dpmacid,
char *env_dpmac)
{
const char *ret;
size_t len;
u8 realbusnum, ioslot;
struct mii_dev *bus;
int phy_num;
char *phystr = "phy00";
/*search phy in dpmac arg*/
for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
sprintf(phystr, "phy%d", phy_num + 1);
ret = hwconfig_subarg_f(arg_dpmacid, phystr, &len, env_dpmac);
if (!ret) {
/*look for phy instead of phy1*/
if (!phy_num)
ret = hwconfig_subarg_f(arg_dpmacid, "phy",
&len, env_dpmac);
if (!ret)
continue;
}
if (len != 4 || strncmp(ret, "0x", 2))
printf("invalid phy format in %s variable.\n"
"specify phy%d for %s in hex format e.g. 0x12\n",
env_dpmac, phy_num + 1, arg_dpmacid);
else
wriop_set_phy_address(dpmac, phy_num,
simple_strtoul(ret, NULL, 16));
}
/*search mdio in dpmac arg*/
ret = hwconfig_subarg_f(arg_dpmacid, "mdio", &len, env_dpmac);
if (ret)
realbusnum = *ret - '0';
else
realbusnum = EMI_NONE;
if (realbusnum) {
/*search io in dpmac arg*/
ret = hwconfig_subarg_f(arg_dpmacid, "io", &len, env_dpmac);
if (ret)
ioslot = *ret - '0';
else
ioslot = IO_SLOT_NONE;
/*Register the muxing front-ends to the MDIO buses*/
bus = lx2162a_qds_mdio_init(realbusnum, ioslot);
if (!bus)
printf("could not get bus for mdio %d ioslot %d\n",
realbusnum, ioslot);
else
wriop_set_mdio(dpmac, bus);
}
}
#endif
#endif /* !CONFIG_DM_ETH */
int board_eth_init(struct bd_info *bis)
{
#ifndef CONFIG_DM_ETH
#if defined(CONFIG_FSL_MC_ENET)
struct memac_mdio_info mdio_info;
struct memac_mdio_controller *regs;
int i;
const char *ret;
char *env_dpmac;
char dpmacid[] = "dpmac00", srds[] = "00_00_00";
size_t len;
struct mii_dev *bus;
const struct phy_config *phy_config;
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 srds_s1, srds_s2;
srds_s1 = in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
srds_s2 = in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
sprintf(srds, "%d_%d", srds_s1, srds_s2);
regs = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
mdio_info.regs = regs;
mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
/*Register the EMI 1*/
fm_memac_mdio_init(bis, &mdio_info);
regs = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
mdio_info.regs = regs;
mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
/*Register the EMI 2*/
fm_memac_mdio_init(bis, &mdio_info);
/* "dpmac" environment variable can be used after
* defining "dpmac_override" in hwconfig environment variable.
*/
if (hwconfig("dpmac_override")) {
env_dpmac = env_get("dpmac");
if (env_dpmac) {
ret = hwconfig_arg_f("srds", &len, env_dpmac);
if (ret) {
if (strncmp(ret, srds, strlen(srds))) {
printf("SERDES configuration changed.\n"
"previous: %.*s, current: %s.\n"
"update dpmac variable.\n",
(int)len, ret, srds);
}
} else {
printf("SERDES configuration not found.\n"
"Please add srds:%s in dpmac variable\n",
srds);
}
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
/* Look for dpmac1 to dpmac24(current max) arg
* in dpmac environment variable
*/
sprintf(dpmacid, "dpmac%d", i);
ret = hwconfig_arg_f(dpmacid, &len, env_dpmac);
if (ret)
do_dpmac_config(i, dpmacid, env_dpmac);
}
} else {
printf("Warning: environment dpmac not found.\n"
"DPAA network interfaces may not work\n");
}
} else {
/*Look for phy config for serdes1 in phy config table*/
phy_config = get_phy_config(srds_s1, serdes1_phy_config,
ARRAY_SIZE(serdes1_phy_config));
if (!phy_config) {
printf("%s WRIOP: Unsupported SerDes1 Protocol %d\n",
__func__, srds_s1);
} else {
do_phy_config(phy_config);
}
phy_config = get_phy_config(srds_s2, serdes2_phy_config,
ARRAY_SIZE(serdes2_phy_config));
if (!phy_config) {
printf("%s WRIOP: Unsupported SerDes2 Protocol %d\n",
__func__, srds_s2);
} else {
do_phy_config(phy_config);
}
}
if (wriop_get_enet_if(WRIOP1_DPMAC17) == PHY_INTERFACE_MODE_RGMII_ID) {
wriop_set_phy_address(WRIOP1_DPMAC17, 0, RGMII_PHY_ADDR1);
bus = lx2162a_qds_mdio_init(EMI1, EMI1_RGMII1);
if (!bus)
printf("could not get bus for RGMII1\n");
else
wriop_set_mdio(WRIOP1_DPMAC17, bus);
}
if (wriop_get_enet_if(WRIOP1_DPMAC18) == PHY_INTERFACE_MODE_RGMII_ID) {
wriop_set_phy_address(WRIOP1_DPMAC18, 0, RGMII_PHY_ADDR2);
bus = lx2162a_qds_mdio_init(EMI1, EMI1_RGMII2);
if (!bus)
printf("could not get bus for RGMII2\n");
else
wriop_set_mdio(WRIOP1_DPMAC18, bus);
}
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */
#endif /* !CONFIG_DM_ETH */
#ifdef CONFIG_PHY_AQUANTIA
/*
* Export functions to be used by AQ firmware
* upload application
*/
gd->jt->strcpy = strcpy;
gd->jt->mdelay = mdelay;
gd->jt->mdio_get_current_dev = mdio_get_current_dev;
gd->jt->phy_find_by_mask = phy_find_by_mask;
gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
#endif
#ifdef CONFIG_DM_ETH
return 0;
#else
return pci_eth_init(bis);
#endif
}
#if defined(CONFIG_RESET_PHY_R)
void reset_phy(void)
{
#if defined(CONFIG_FSL_MC_ENET)
mc_env_boot();
#endif
}
#endif /* CONFIG_RESET_PHY_R */
#ifndef CONFIG_DM_ETH
#if defined(CONFIG_FSL_MC_ENET)
int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle)
{
int offset;
int ret;
char dpmac_str[] = "dpmacs@00";
const char *phy_string;
offset = fdt_path_offset(fdt, "/soc/fsl-mc/dpmacs");
if (offset < 0)
offset = fdt_path_offset(fdt, "/fsl-mc/dpmacs");
if (offset < 0) {
printf("dpmacs node not found in device tree\n");
return offset;
}
sprintf(dpmac_str, "dpmac@%x", dpmac_id);
debug("dpmac_str = %s\n", dpmac_str);
offset = fdt_subnode_offset(fdt, offset, dpmac_str);
if (offset < 0) {
printf("%s node not found in device tree\n", dpmac_str);
return offset;
}
phy_string = fdt_getprop(fdt, offset, "phy-connection-type", NULL);
if (is_backplane_mode(phy_string)) {
/* Backplane KR mode: skip fixups */
printf("Interface %d in backplane KR mode\n", dpmac_id);
return 0;
}
ret = fdt_appendprop_cell(fdt, offset, "phy-handle", node_phandle);
if (ret)
printf("%d@%s %d\n", __LINE__, __func__, ret);
phy_string = phy_string_for_interface(wriop_get_enet_if(dpmac_id));
ret = fdt_setprop_string(fdt, offset, "phy-connection-type",
phy_string);
if (ret)
printf("%d@%s %d\n", __LINE__, __func__, ret);
return ret;
}
int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset)
{
char mdio_ioslot_str[] = "mdio@00";
struct lx2162a_qds_mdio *priv;
u64 reg;
u32 phandle;
int offset, mux_val;
/*Test if the MDIO bus is real mdio bus or muxing front end ?*/
if (strncmp(mii_dev->name, "LX2162A_QDS_MDIO",
strlen("LX2162A_QDS_MDIO")))
return -1;
/*Get the real MDIO bus num and ioslot info from bus's priv data*/
priv = mii_dev->priv;
debug("real_bus_num = %d, ioslot = %d\n",
priv->realbusnum, priv->ioslot);
if (priv->realbusnum == EMI1)
reg = CONFIG_SYS_FSL_WRIOP1_MDIO1;
else
reg = CONFIG_SYS_FSL_WRIOP1_MDIO2;
offset = fdt_node_offset_by_compat_reg(fdt, "fsl,fman-memac-mdio", reg);
if (offset < 0) {
printf("mdio@%llx node not found in device tree\n", reg);
return offset;
}
phandle = fdt_get_phandle(fdt, offset);
phandle = cpu_to_fdt32(phandle);
offset = fdt_node_offset_by_prop_value(fdt, -1, "mdio-parent-bus",
&phandle, 4);
if (offset < 0) {
printf("mdio-mux-%d node not found in device tree\n",
priv->realbusnum == EMI1 ? 1 : 2);
return offset;
}
mux_val = lx2162a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot);
if (priv->realbusnum == EMI1)
mux_val >>= BRDCFG4_EMI1SEL_SHIFT;
else
mux_val >>= BRDCFG4_EMI2SEL_SHIFT;
sprintf(mdio_ioslot_str, "mdio@%x", (u8)mux_val);
offset = fdt_subnode_offset(fdt, offset, mdio_ioslot_str);
if (offset < 0) {
printf("%s node not found in device tree\n", mdio_ioslot_str);
return offset;
}
return offset;
}
int fdt_create_phy_node(void *fdt, int offset, u8 phyaddr, int *subnodeoffset,
struct phy_device *phy_dev, int phandle)
{
char phy_node_name[] = "ethernet-phy@00";
char phy_id_compatible_str[] = "ethernet-phy-id0000.0000,";
int ret;
sprintf(phy_node_name, "ethernet-phy@%x", phyaddr);
debug("phy_node_name = %s\n", phy_node_name);
*subnodeoffset = fdt_add_subnode(fdt, offset, phy_node_name);
if (*subnodeoffset <= 0) {
printf("Could not add subnode %s inside node %s err = %s\n",
phy_node_name, fdt_get_name(fdt, offset, NULL),
fdt_strerror(*subnodeoffset));
return *subnodeoffset;
}
sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x,",
phy_dev->phy_id >> 16, phy_dev->phy_id & 0xFFFF);
debug("phy_id_compatible_str %s\n", phy_id_compatible_str);
ret = fdt_setprop_string(fdt, *subnodeoffset, "compatible",
phy_id_compatible_str);
if (ret) {
printf("%d@%s %d\n", __LINE__, __func__, ret);
goto out;
}
if (phy_dev->is_c45) {
ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
"ethernet-phy-ieee802.3-c45");
if (ret) {
printf("%d@%s %d\n", __LINE__, __func__, ret);
goto out;
}
} else {
ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
"ethernet-phy-ieee802.3-c22");
if (ret) {
printf("%d@%s %d\n", __LINE__, __func__, ret);
goto out;
}
}
ret = fdt_setprop_cell(fdt, *subnodeoffset, "reg", phyaddr);
if (ret) {
printf("%d@%s %d\n", __LINE__, __func__, ret);
goto out;
}
ret = fdt_set_phandle(fdt, *subnodeoffset, phandle);
if (ret) {
printf("%d@%s %d\n", __LINE__, __func__, ret);
goto out;
}
out:
if (ret)
fdt_del_node(fdt, *subnodeoffset);
return ret;
}
#define is_rgmii(dpmac_id) \
wriop_get_enet_if((dpmac_id)) == PHY_INTERFACE_MODE_RGMII_ID
int fdt_fixup_board_phy(void *fdt)
{
int fpga_offset, offset, subnodeoffset;
struct mii_dev *mii_dev;
struct list_head *mii_devs, *entry;
int ret, dpmac_id, phandle, i;
struct phy_device *phy_dev;
char ethname[ETH_NAME_LEN];
phy_interface_t phy_iface;
ret = 0;
/* we know FPGA is connected to i2c0, therefore search path directly,
* instead of compatible property, as it saves time
*/
fpga_offset = fdt_path_offset(fdt, "/soc/i2c@2000000/fpga");
if (fpga_offset < 0)
fpga_offset = fdt_path_offset(fdt, "/i2c@2000000/fpga");
if (fpga_offset < 0) {
printf("i2c@2000000/fpga node not found in device tree\n");
return fpga_offset;
}
phandle = fdt_alloc_phandle(fdt);
mii_devs = mdio_get_list_head();
list_for_each(entry, mii_devs) {
mii_dev = list_entry(entry, struct mii_dev, link);
debug("mii_dev name : %s\n", mii_dev->name);
offset = fdt_get_ioslot_offset(fdt, mii_dev, fpga_offset);
if (offset < 0)
continue;
// Look for phy devices attached to MDIO bus muxing front end
// and create their entries with compatible being the device id
for (i = 0; i < PHY_MAX_ADDR; i++) {
phy_dev = mii_dev->phymap[i];
if (!phy_dev)
continue;
// TODO: use sscanf instead of loop
dpmac_id = WRIOP1_DPMAC1;
while (dpmac_id < NUM_WRIOP_PORTS) {
phy_iface = wriop_get_enet_if(dpmac_id);
snprintf(ethname, ETH_NAME_LEN, "DPMAC%d@%s",
dpmac_id,
phy_string_for_interface(phy_iface));
if (strcmp(ethname, phy_dev->dev->name) == 0)
break;
dpmac_id++;
}
if (dpmac_id == NUM_WRIOP_PORTS)
continue;
if ((dpmac_id == 17 || dpmac_id == 18) &&
is_rgmii(dpmac_id))
continue;
ret = fdt_create_phy_node(fdt, offset, i,
&subnodeoffset,
phy_dev, phandle);
if (ret)
break;
ret = fdt_fixup_dpmac_phy_handle(fdt,
dpmac_id, phandle);
if (ret) {
fdt_del_node(fdt, subnodeoffset);
break;
}
/* calculate offset again as new node addition may have
* changed offset;
*/
offset = fdt_get_ioslot_offset(fdt, mii_dev,
fpga_offset);
phandle++;
}
if (ret)
break;
}
return ret;
}
#endif // CONFIG_FSL_MC_ENET
#endif
#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
/* Structure to hold SERDES protocols supported in case of
* CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
*
* @serdes_block: the index of the SERDES block
* @serdes_protocol: the decimal value of the protocol supported
* @dts_needed: DTS notes describing the current configuration are needed
*
* When dts_needed is true, the board_fit_config_name_match() function
* will try to exactly match the current configuration of the block with a DTS
* name provided.
*/
static struct serdes_configuration {
u8 serdes_block;
u32 serdes_protocol;
bool dts_needed;
} supported_protocols[] = {
/* Serdes block #1 */
{1, 2, true},
{1, 3, true},
{1, 15, true},
{1, 17, true},
{1, 18, true},
{1, 20, true},
/* Serdes block #2 */
{2, 2, false},
{2, 3, false},
{2, 5, false},
{2, 10, false},
{2, 11, true},
{2, 12, true},
};
#define SUPPORTED_SERDES_PROTOCOLS ARRAY_SIZE(supported_protocols)
static bool protocol_supported(u8 serdes_block, u32 protocol)
{
struct serdes_configuration serdes_conf;
int i;
for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
serdes_conf = supported_protocols[i];
if (serdes_conf.serdes_block == serdes_block &&
serdes_conf.serdes_protocol == protocol)
return true;
}
return false;
}
static void get_str_protocol(u8 serdes_block, u32 protocol, char *str)
{
struct serdes_configuration serdes_conf;
int i;
for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
serdes_conf = supported_protocols[i];
if (serdes_conf.serdes_block == serdes_block &&
serdes_conf.serdes_protocol == protocol) {
if (serdes_conf.dts_needed == true)
sprintf(str, "%u", protocol);
else
sprintf(str, "x");
return;
}
}
}
int board_fit_config_name_match(const char *name)
{
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 rcw_status = in_le32(&gur->rcwsr[28]);
char srds_s1_str[2], srds_s2_str[2];
u32 srds_s1, srds_s2;
char expected_dts[100];
srds_s1 = rcw_status & FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
srds_s2 = rcw_status & FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
/* Check for supported protocols. The default DTS will be used
* in this case
*/
if (!protocol_supported(1, srds_s1) ||
!protocol_supported(2, srds_s2))
return -1;
get_str_protocol(1, srds_s1, srds_s1_str);
get_str_protocol(2, srds_s2, srds_s2_str);
sprintf(expected_dts, "fsl-lx2160a-qds-%s-%s",
srds_s1_str, srds_s2_str);
if (!strcmp(name, expected_dts))
return 0;
return -1;
}
#endif

43
board/freescale/lx2160a/lx2160a.c
View File

@ -32,12 +32,13 @@
#include "../common/vid.h"
#include <fsl_immap.h>
#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include "lx2160a.h"
#ifdef CONFIG_EMC2305
#include "../common/emc2305.h"
#endif
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
#define CFG_MUX_I2C_SDHC(reg, value) ((reg & 0x3f) | value)
#define SET_CFG_MUX1_SDHC1_SDHC(reg) (reg & 0x3f)
#define SET_CFG_MUX2_SDHC1_SPI(reg, value) ((reg & 0xcf) | value)
@ -47,7 +48,7 @@
#define SDHC1_BASE_PMUX_DSPI 2
#define SDHC2_BASE_PMUX_DSPI 2
#define IIC5_PMUX_SPI3 3
#endif /* CONFIG_TARGET_LX2160AQDS */
#endif /* CONFIG_TARGET_LX2160AQDS or CONFIG_TARGET_LX2162AQDS */
DECLARE_GLOBAL_DATA_PTR;
@ -191,7 +192,7 @@ int board_fix_fdt(void *fdt)
}
#endif
#if defined(CONFIG_TARGET_LX2160AQDS)
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
void esdhc_dspi_status_fixup(void *blob)
{
const char esdhc0_path[] = "/soc/esdhc@2140000";
@ -259,7 +260,7 @@ void esdhc_dspi_status_fixup(void *blob)
int esdhc_status_fixup(void *blob, const char *compat)
{
#if defined(CONFIG_TARGET_LX2160AQDS)
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
/* Enable esdhc and dspi DT nodes based on RCW fields */
esdhc_dspi_status_fixup(blob);
#else
@ -297,7 +298,7 @@ int checkboard(void)
enum boot_src src = get_boot_src();
char buf[64];
u8 sw;
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
int clock;
static const char *const freq[] = {"100", "125", "156.25",
"161.13", "322.26", "", "", "",
@ -306,7 +307,7 @@ int checkboard(void)
#endif
cpu_name(buf);
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
printf("Board: %s-QDS, ", buf);
#else
printf("Board: %s-RDB, ", buf);
@ -339,7 +340,13 @@ int checkboard(void)
break;
}
}
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160ARDB)
printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
#else
printf("FPGA: v%d (%s), build %d",
(int)QIXIS_READ(scver), qixis_read_tag(buf),
(int)qixis_read_minor());
@ -350,31 +357,27 @@ int checkboard(void)
sw = QIXIS_READ(brdcfg[2]);
clock = sw >> 4;
printf("Clock1 = %sMHz ", freq[clock]);
#if defined(CONFIG_TARGET_LX2160AQDS)
clock = sw & 0x0f;
printf("Clock2 = %sMHz", freq[clock]);
#endif
sw = QIXIS_READ(brdcfg[3]);
puts("\nSERDES2 Reference : ");
clock = sw >> 4;
printf("Clock1 = %sMHz ", freq[clock]);
clock = sw & 0x0f;
printf("Clock2 = %sMHz", freq[clock]);
printf("Clock2 = %sMHz\n", freq[clock]);
#if defined(CONFIG_TARGET_LX2160AQDS)
sw = QIXIS_READ(brdcfg[12]);
puts("\nSERDES3 Reference : ");
puts("SERDES3 Reference : ");
clock = sw >> 4;
printf("Clock1 = %sMHz Clock2 = %sMHz\n", freq[clock], freq[clock]);
#else
printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
#endif
#endif
return 0;
}
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
/*
* implementation of CONFIG_ESDHC_DETECT_QUIRK Macro.
*/
@ -562,7 +565,7 @@ int config_board_mux(void)
unsigned long get_board_sys_clk(void)
{
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
switch (sysclk_conf & 0x03) {
@ -581,7 +584,7 @@ unsigned long get_board_sys_clk(void)
unsigned long get_board_ddr_clk(void)
{
#ifdef CONFIG_TARGET_LX2160AQDS
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
switch ((ddrclk_conf & 0x30) >> 4) {

61
board/freescale/lx2160a/lx2160a.h Normal file
View File

@ -0,0 +1,61 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2020 NXP
*/
#ifndef __LX2160_H
#define __LX2160_H
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
/* SYSCLK */
#define QIXIS_SYSCLK_100 0x0
#define QIXIS_SYSCLK_125 0x1
#define QIXIS_SYSCLK_133 0x2
/* DDRCLK */
#define QIXIS_DDRCLK_100 0x0
#define QIXIS_DDRCLK_125 0x1
#define QIXIS_DDRCLK_133 0x2
#define BRDCFG4_EMI1SEL_MASK 0xF8
#define BRDCFG4_EMI1SEL_SHIFT 3
#define BRDCFG4_EMI2SEL_MASK 0x07
#define BRDCFG4_EMI2SEL_SHIFT 0
#endif
#define QIXIS_XMAP_SHIFT 5
/* RTC */
#define I2C_MUX_CH_RTC 0xB
/* MAC/PHY configuration */
#if defined(CONFIG_FSL_MC_ENET)
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
#define AQ_PHY_ADDR1 0x00
#define AQ_PHY_ADDR2 0x01
#define AQ_PHY_ADDR3 0x02
#define AQ_PHY_ADDR4 0x03
#endif
#ifdef CONFIG_TARGET_LX2160ARDB
#define AQR107_PHY_ADDR1 0x04
#define AQR107_PHY_ADDR2 0x05
#define AQR107_IRQ_MASK 0x0C
#endif
#define CORTINA_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR1 0x0
#define RGMII_PHY_ADDR1 0x01
#define RGMII_PHY_ADDR2 0x02
#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
#define INPHI_PHY_ADDR2 0x1
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
#endif
#endif
#endif /* __LX2160_H */

98
configs/lx2162aqds_tfa_SECURE_BOOT_defconfig Normal file
View File

@ -0,0 +1,98 @@
CONFIG_ARM=y
CONFIG_TARGET_LX2162AQDS=y
CONFIG_TFABOOT=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_NXP_ESBC=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_ENV_OFFSET=0x500000
CONFIG_FSPI_AHB_EN_4BYTE=y
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_WDT=y
CONFIG_CMD_CACHE=y
CONFIG_MP=y
CONFIG_OF_CONTROL=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds"
CONFIG_OF_LIST="fsl-lx2162a-qds-17-x fsl-lx2162a-qds-18-x fsl-lx2162a-qds-20-x"
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SATA_CEVA=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_PHY_CORTINA=y
CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_E1000=y
CONFIG_MDIO_MUX_I2CREG=y
CONFIG_FSL_LS_MDIO=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_WDT=y
CONFIG_WDT_SBSA=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
CONFIG_GIC_V3_ITS=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_RTC=y
CONFIG_DM_GPIO=y
CONFIG_CMD_DATE=y
CONFIG_RTC_PCF2127=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y

96
configs/lx2162aqds_tfa_defconfig Normal file
View File

@ -0,0 +1,96 @@
CONFIG_ARM=y
CONFIG_TARGET_LX2162AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_ENV_OFFSET=0x500000
CONFIG_FSPI_AHB_EN_4BYTE=y
CONFIG_TFABOOT=y
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_WDT=y
CONFIG_CMD_CACHE=y
CONFIG_MP=y
CONFIG_OF_CONTROL=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds"
CONFIG_OF_LIST="fsl-lx2162a-qds-17-x fsl-lx2162a-qds-18-x fsl-lx2162a-qds-20-x"
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SATA_CEVA=y
CONFIG_FSL_CAAM=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_PHY_CORTINA=y
CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_E1000=y
CONFIG_MDIO_MUX_I2CREG=y
CONFIG_FSL_LS_MDIO=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_WDT=y
CONFIG_WDT_SBSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
CONFIG_GIC_V3_ITS=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_RTC=y
CONFIG_DM_GPIO=y
CONFIG_CMD_DATE=y
CONFIG_RTC_PCF2127=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y

103
configs/lx2162aqds_tfa_verified_boot_defconfig Normal file
View File

@ -0,0 +1,103 @@
CONFIG_ARM=y
CONFIG_TARGET_LX2162AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_ENV_OFFSET=0x500000
CONFIG_FSPI_AHB_EN_4BYTE=y
CONFIG_TFABOOT=y
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_RSA=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_WDT=y
CONFIG_CMD_CACHE=y
CONFIG_MP=y
CONFIG_OF_CONTROL=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds"
CONFIG_OF_LIST="fsl-lx2162a-qds-17-x fsl-lx2162a-qds-18-x fsl-lx2162a-qds-20-x"
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SATA_CEVA=y
CONFIG_FSL_CAAM=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_PHY_CORTINA=y
CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_E1000=y
CONFIG_MDIO_MUX_I2CREG=y
CONFIG_FSL_LS_MDIO=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_WDT=y
CONFIG_WDT_SBSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
CONFIG_GIC_V3_ITS=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_RTC=y
CONFIG_DM_GPIO=y
CONFIG_CMD_DATE=y
CONFIG_RTC_PCF2127=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_TEE=y
CONFIG_OPTEE=y
CONFIG_CMD_OPTEE_RPMB=y
CONFIG_OPTEE_TA_AVB=y
CONFIG_SUPPORT_EMMC_RPMB=y

2
include/configs/lx2160a_common.h
View File

@ -149,8 +149,10 @@
/* USB */
#ifdef CONFIG_USB
#define CONFIG_HAS_FSL_XHCI_USB
#ifndef CONFIG_TARGET_LX2162AQDS
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
#endif
/* FlexSPI */
#ifdef CONFIG_NXP_FSPI

75
include/configs/lx2160aqds.h
View File

@ -8,70 +8,14 @@
#include "lx2160a_common.h"
/* Qixis */
#define QIXIS_XMAP_MASK 0x07
#define QIXIS_XMAP_SHIFT 5
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x20
#define QIXIS_LBMAP_QSPI 0x00
#define QIXIS_RCW_SRC_QSPI 0xff
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_LBMAP_MASK 0x0f
#define QIXIS_LBMAP_SD
#define QIXIS_LBMAP_EMMC
#define QIXIS_RCW_SRC_SD 0x08
#define QIXIS_RCW_SRC_EMMC 0x09
#define NON_EXTENDED_DUTCFG
#define QIXIS_SDID_MASK 0x07
#define QIXIS_ESDHC_NO_ADAPTER 0x7
/* SYSCLK */
#define QIXIS_SYSCLK_100 0x0
#define QIXIS_SYSCLK_125 0x1
#define QIXIS_SYSCLK_133 0x2
/* DDRCLK */
#define QIXIS_DDRCLK_100 0x0
#define QIXIS_DDRCLK_125 0x1
#define QIXIS_DDRCLK_133 0x2
#define BRDCFG4_EMI1SEL_MASK 0xF8
#define BRDCFG4_EMI1SEL_SHIFT 3
#define BRDCFG4_EMI2SEL_MASK 0x07
#define BRDCFG4_EMI2SEL_SHIFT 0
/* VID */
#define I2C_MUX_CH_VOL_MONITOR 0xA
/* Voltage monitor on channel 2*/
#define I2C_VOL_MONITOR_ADDR 0x63
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv"
#define CONFIG_VID
/* The lowest and highest voltage allowed*/
#define VDD_MV_MIN 775
#define VDD_MV_MAX 925
/* PM Bus commands code for LTC3882*/
#define PMBUS_CMD_PAGE 0x0
#define PMBUS_CMD_READ_VOUT 0x8B
#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
#define PMBUS_CMD_VOUT_COMMAND 0x21
#define PWM_CHANNEL0 0x0
#define CONFIG_VOL_MONITOR_LTC3882_SET
#define CONFIG_VOL_MONITOR_LTC3882_READ
/* RTC */
#define CONFIG_SYS_RTC_BUS_NUM 0
#define I2C_MUX_CH_RTC 0xB
/*
* MMC
@ -87,25 +31,6 @@ u8 qixis_esdhc_detect_quirk(void);
#if defined(CONFIG_FSL_MC_ENET)
#define CONFIG_MII
#define CONFIG_ETHPRIME "DPMAC17@rgmii-id"
#define AQ_PHY_ADDR1 0x00
#define AQ_PHY_ADDR2 0x01
#define AQ_PHY_ADDR3 0x02
#define AQ_PHY_ADDR4 0x03
#define CORTINA_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR2 0x1
#define RGMII_PHY_ADDR1 0x01
#define RGMII_PHY_ADDR2 0x02
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
#endif
/* EEPROM */

49
include/configs/lx2160ardb.h
View File

@ -8,47 +8,9 @@
#include "lx2160a_common.h"
/* Qixis */
#define QIXIS_XMAP_MASK 0x07
#define QIXIS_XMAP_SHIFT 5
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x20
#define QIXIS_LBMAP_QSPI 0x00
#define QIXIS_RCW_SRC_QSPI 0xff
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_LBMAP_MASK 0x0f
#define QIXIS_LBMAP_SD
#define QIXIS_LBMAP_EMMC
#define QIXIS_RCW_SRC_SD 0x08
#define QIXIS_RCW_SRC_EMMC 0x09
#define NON_EXTENDED_DUTCFG
/* VID */
#define I2C_MUX_CH_VOL_MONITOR 0xA
/* Voltage monitor on channel 2*/
#define I2C_VOL_MONITOR_ADDR 0x63
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
#define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv"
#define CONFIG_VID
/* The lowest and highest voltage allowed*/
#define VDD_MV_MIN 775
#define VDD_MV_MAX 855
/* PM Bus commands code for LTC3882*/
#define PMBUS_CMD_PAGE 0x0
#define PMBUS_CMD_READ_VOUT 0x8B
#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
#define PMBUS_CMD_VOUT_COMMAND 0x21
#define PWM_CHANNEL0 0x0
#define CONFIG_VOL_MONITOR_LTC3882_SET
#define CONFIG_VOL_MONITOR_LTC3882_READ
@ -59,17 +21,6 @@
#if defined(CONFIG_FSL_MC_ENET)
#define CONFIG_MII
#define CONFIG_ETHPRIME "DPMAC1@xgmii"
#define AQR107_PHY_ADDR1 0x04
#define AQR107_PHY_ADDR2 0x05
#define AQR107_IRQ_MASK 0x0C
#define CORTINA_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR1 0x0
#define RGMII_PHY_ADDR1 0x01
#define RGMII_PHY_ADDR2 0x02
#endif
/* EMC2305 */

78
include/configs/lx2162aqds.h Normal file
View File

@ -0,0 +1,78 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2020 NXP
*/
#ifndef __LX2162_QDS_H
#define __LX2162_QDS_H
#include "lx2160a_common.h"
/* USB */
#undef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
/* Voltage monitor on channel 2*/
#define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv"
#define CONFIG_VID
#define CONFIG_VOL_MONITOR_LTC3882_SET
#define CONFIG_VOL_MONITOR_LTC3882_READ
/* RTC */
#define CONFIG_SYS_RTC_BUS_NUM 0
/*
* MMC
*/
#ifdef CONFIG_MMC
#ifndef __ASSEMBLY__
u8 qixis_esdhc_detect_quirk(void);
#endif
#define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk()
#endif
/* MAC/PHY configuration */
#if defined(CONFIG_FSL_MC_ENET)
#define CONFIG_MII
#define CONFIG_ETHPRIME "DPMAC17@rgmii-id"
#endif
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM 0
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
"boot_scripts=lx2162aqds_boot.scr\0" \
"boot_script_hdr=hdr_lx2162aqds_bs.out\0" \
"BOARD=lx2162aqds\0" \
"xspi_bootcmd=echo Trying load from flexspi..;" \
"sf probe 0:0 && sf read $load_addr " \
"$kernel_start $kernel_size ; env exists secureboot &&" \
"sf read $kernelheader_addr_r $kernelheader_start " \
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
" bootm $load_addr#$BOARD\0" \
"sd_bootcmd=echo Trying load from sd card..;" \
"mmc dev 0; mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0" \
"emmc_bootcmd=echo Trying load from emmc card..;" \
"mmc dev 1; mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
#include <asm/fsl_secure_boot.h>
#endif /* __LX2162_QDS_H */