leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge tag 'u-boot-amlogic-20201005' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

Browse Source 
- generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
- Update Gadget code to use the new GXL and AXG USB glue driver
- Add a VIM3 board support to add dynamic PCIe enable in OS DT
- Fix AXG pinmux with requesting GPIOs
- Add missing GPIOA_18 for AXG pinctrl
- Add Amlogic PWM driver
This commit is contained in:
Tom Rini
2020-10-06 08:36:10 -04:00
parent b24550accd 2d481b2e3e
commit 987ab49366
63 changed files with 2316 additions and 398 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
doc/board/amlogic/khadas-vim3.rst
View File

@@ -18,6 +18,33 @@ Technology Co., Ltd. with the following specifications:
Schematics are available on the manufacturer website.
PCIe Setup
----------
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.
To setup for PCIe, run the following commands from U-Boot:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 1
Then power-cycle the board.
To set back to USB3.0, run the following commands from U-Boot:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 0
Then power-cycle the board.
U-Boot compilation
------------------

27
doc/board/amlogic/khadas-vim3l.rst
View File

@@ -18,6 +18,33 @@ Technology Co., Ltd. with the following specifications:
Schematics are available on the manufacturer website.
PCIe Setup
----------
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.
To setup for PCIe, run the following commands from U-Boot:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 1
Then power-cycle the board.
To set back to USB3.0, run the following commands from U-Boot:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 0
Then power-cycle the board.
U-Boot compilation
------------------