leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Coding Style cleanup: replace leading SPACEs by TABs

Browse Source 
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
Wolfgang Denk
2013-10-04 17:43:24 +02:00
committed by Tom Rini
parent 3765b3e7bd
commit 93e1459641
116 changed files with 506 additions and 506 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
board/Barix/ipam390/README.ipam390
View File

@@ -50,7 +50,7 @@ TFTP from server 192.168.1.1; our IP address is 192.168.20.71
Filename '/tftpboot/ipam390/u-boot.ais'.
Load address: 0xc0000000
Loading: ##################################
1.5 MiB/s
1.5 MiB/s
done
Bytes transferred = 493716 (78894 hex)

4
board/altera/common/sevenseg.c
View File

@@ -87,10 +87,10 @@ static inline void __sevenseg_set (unsigned int value)
#if (SEVENSEG_ACTIVE == 0)
sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
| ((~value) & (~SEVENDEG_MASK_DP));
| ((~value) & (~SEVENDEG_MASK_DP));
#else
sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
| (value);
| (value);
#endif
piop->data = sevenseg_portval;

52
board/boundary/nitrogen6x/6x_upgrade.txt
View File

@@ -6,39 +6,39 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
if sf probe || sf probe || \
sf probe 1 27000000 || sf probe 1 27000000 ; then
echo "probed SPI ROM" ;
if sf read 0x12400000 $offset $filesize ; then
if cmp.b 0x12000000 0x12400000 $filesize ; then
echo "------- U-Boot versions match" ;
else
echo "Need U-Boot upgrade" ;
echo "Program in 5 seconds" ;
for n in 5 4 3 2 1 ; do
echo $n ;
sleep 1 ;
done
if sf read 0x12400000 $offset $filesize ; then
if cmp.b 0x12000000 0x12400000 $filesize ; then
echo "------- U-Boot versions match" ;
else
echo "Need U-Boot upgrade" ;
echo "Program in 5 seconds" ;
for n in 5 4 3 2 1 ; do
echo $n ;
sleep 1 ;
done
echo "erasing" ;
sf erase 0 0x50000 ;
sf erase 0 0x50000 ;
# two steps to prevent bricking
echo "programming" ;
sf write 0x12000000 $offset $filesize ;
sf write 0x12000000 $offset $filesize ;
echo "verifying" ;
if sf read 0x12400000 $offset $filesize ; then
if cmp.b 0x12000000 0x12400000 $filesize ; then
while echo "---- U-Boot upgraded. reset" ; do
if sf read 0x12400000 $offset $filesize ; then
if cmp.b 0x12000000 0x12400000 $filesize ; then
while echo "---- U-Boot upgraded. reset" ; do
sleep 120
done
else
echo "Read verification error" ;
fi
else
echo "Error re-reading EEPROM" ;
fi
fi
else
echo "Error reading boot loader from EEPROM" ;
fi
else
echo "Read verification error" ;
fi
else
echo "Error re-reading EEPROM" ;
fi
fi
else
echo "Error reading boot loader from EEPROM" ;
fi
else
echo "Error initializing EEPROM" ;
echo "Error initializing EEPROM" ;
fi ;
else
echo "No U-Boot image found on SD card" ;

10
board/chromebook-x86/dts/alex.dts
View File

@@ -3,8 +3,8 @@
/include/ "coreboot.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
model = "Google Alex";
compatible = "google,alex", "intel,atom-pineview";
@@ -12,13 +12,13 @@
silent_console = <0>;
};
gpio: gpio {};
gpio: gpio {};
serial {
reg = <0x3f8 8>;
clock-frequency = <115200>;
};
chosen { };
memory { device_type = "memory"; reg = <0 0>; };
chosen { };
memory { device_type = "memory"; reg = <0 0>; };
};

10
board/chromebook-x86/dts/link.dts
View File

@@ -3,8 +3,8 @@
/include/ "coreboot.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
model = "Google Link";
compatible = "google,link", "intel,celeron-ivybridge";
@@ -12,15 +12,15 @@
silent_console = <0>;
};
gpio: gpio {};
gpio: gpio {};
serial {
reg = <0x3f8 8>;
clock-frequency = <115200>;
};
chosen { };
memory { device_type = "memory"; reg = <0 0>; };
chosen { };
memory { device_type = "memory"; reg = <0 0>; };
spi {
#address-cells = <1>;

4
board/cobra5272/bdm/cobra5272_uboot.gdb
View File

@@ -1,11 +1,11 @@
#
# GDB Init script for the Coldfire 5272 processor.
#
# The main purpose of this script is to configure the
# The main purpose of this script is to configure the
# DRAM controller so code can be loaded.
#
# This file was changed to suite the senTec COBRA5272 board.
#
#
define addresses

2
board/cogent/flash.c
View File

@@ -487,7 +487,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
if (haderr > 0) {
printf (" failed\n");
rcode = 1;
rcode = 1;
}
else
printf (" done\n");

6
board/cray/L1/bootscript.hush
View File

@@ -47,7 +47,7 @@ else
echo no kernel to boot from $flash_krl, need tftp
fi
# Have a rootfs in flash?
# Have a rootfs in flash?
echo test for SQUASHfs at $flash_rfs
if imi $flash_rfs
@@ -69,7 +69,7 @@ fi
# TFTP down a kernel
if printenv bootfile
then
then
tftp $tftp_addr $bootfile
setenv kernel $tftp_addr
echo I will boot the TFTP kernel
@@ -90,7 +90,7 @@ if printenv rootpath
then
echo rootpath is $rootpath
if printenv initrd
then
then
echo initrd is also specified, so use $initrd
tftp $tftp2_addr $initrd
setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs

2
board/esd/common/lcd.h
View File

@@ -9,7 +9,7 @@
* Neutralize little endians.
*/
#define SWAP_LONG(data) ((unsigned long) \
(((unsigned long)(data) >> 24) | \
(((unsigned long)(data) >> 24) | \
((unsigned long)(data) << 24) | \
(((unsigned long)(data) >> 8) & 0x0000ff00 ) | \
(((unsigned long)(data) << 8) & 0x00ff0000 )))

2
board/esd/cpci750/ide.c
View File

@@ -43,7 +43,7 @@ int ide_preinit (void)
if (devbusfn != -1) {
cpci_hd_type = 1;
} else {
devbusfn = pci_find_device (0x1095, 0x3114, 0);
devbusfn = pci_find_device (0x1095, 0x3114, 0);
if (devbusfn != -1) {
cpci_hd_type = 2;
}

2
board/esd/cpci750/pci.c
View File

@@ -746,7 +746,7 @@ static int gt_read_config_dword (struct pci_controller *hose,
int bus = PCI_BUS (dev);
if ((bus == local_buses[0]) || (bus == local_buses[1])) {
*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
offset | (PCI_FUNC(dev) << 8),
PCI_DEV (dev));
} else {

12
board/etin/debris/flash.c
View File

@@ -323,7 +323,7 @@ int flash_erase (flash_info_t *flash, int s_first, int s_last)
if (prot)
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
prot);
else
printf ("\n");
@@ -365,7 +365,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_1MiB,
NumEraseRegions: 4,
regions: {ERASEINFO(0x10000,15),
ERASEINFO(0x08000,1),
ERASEINFO(0x08000,1),
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1)
}
@@ -376,7 +376,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_2MiB,
NumEraseRegions: 4,
regions: {ERASEINFO(0x10000,31),
ERASEINFO(0x08000,1),
ERASEINFO(0x08000,1),
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1)
}
@@ -387,7 +387,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_2MiB,
NumEraseRegions: 4,
regions: {ERASEINFO(0x04000,1),
ERASEINFO(0x02000,2),
ERASEINFO(0x02000,2),
ERASEINFO(0x08000,1),
ERASEINFO(0x10000,31)
}
@@ -398,7 +398,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_4MiB,
NumEraseRegions: 2,
regions: {ERASEINFO(0x10000,63),
ERASEINFO(0x02000,8)
ERASEINFO(0x02000,8)
}
}, {
@@ -408,7 +408,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_4MiB,
NumEraseRegions: 2,
regions: {ERASEINFO(0x02000,8),
ERASEINFO(0x10000,63)
ERASEINFO(0x10000,63)
}
}
};

14
board/evb64260/flash.c
View File

@@ -60,7 +60,7 @@ flash_init (void)
#define CONFIG_SYS_BOOT_FLASH_WIDTH 1
#endif
size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
&flash_info[0]);
&flash_info[0]);
#ifndef CONFIG_P3G4
printf("[");
@@ -97,17 +97,17 @@ flash_init (void)
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
flash_get_info(CONFIG_SYS_MONITOR_BASE));
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
flash_get_info(CONFIG_ENV_ADDR));
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
flash_get_info(CONFIG_ENV_ADDR));
#endif
flash_size = size_b0 + size_b1;

4
board/evb64260/mpsc.c
View File

@@ -785,7 +785,7 @@ galmpsc_shutdown(int mpsc)
GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
SDMA_TX_ABORT | SDMA_RX_ABORT);
SDMA_TX_ABORT | SDMA_RX_ABORT);
/* shut down the MPSC */
GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
@@ -797,7 +797,7 @@ galmpsc_shutdown(int mpsc)
/* shut down the sdma engines. */
/* reset config to default */
GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
0x000000fc);
0x000000fc);
udelay(100);

4
board/fads/fads.c
View File

@@ -434,7 +434,7 @@ static int _initsdram(uint base, uint noMbytes)
*/
memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
/* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
/* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
udelay(200);
/* Run 8 refresh cycles */
@@ -567,7 +567,7 @@ static int initsdram(uint base, uint *noMbytes)
if(!_initsdram(base, m))
{
*noMbytes += m;
*noMbytes += m;
return 0;
}
else

2
board/freescale/b4860qds/tlb.c
View File

@@ -68,7 +68,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 3, BOOKE_PAGESZ_256M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),

10
board/freescale/bsc9132qds/README
View File

@@ -23,14 +23,14 @@ Overview
ECC), up to 1333 MHz data rate
- Dedicated security engine featuring trusted boot
- Two DMA controllers
- OCNDMA with four bidirectional channels
- SysDMA with sixteen bidirectional channels
- OCNDMA with four bidirectional channels
- SysDMA with sixteen bidirectional channels
- Interfaces
- Four-lane SerDes PHY
- Four-lane SerDes PHY
- PCI Express controller complies with the PEX Specification-Rev 2.0
- Two Common Public Radio Interface (CPRI) controller lanes
- Two Common Public Radio Interface (CPRI) controller lanes
- High-speed USB 2.0 host and device controller with ULPI interface
- Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Antenna interface controller (AIC), supporting four industry
standard JESD207/four custom ADI RF interfaces
- ADI lanes support both full duplex FDD support & half duplex TDD

4
board/freescale/mpc8313erdb/mpc8313erdb.c
View File

@@ -129,12 +129,12 @@ void board_init_f(ulong bootflag)
{
board_early_init_f();
NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
puts("NAND boot... ");
init_timebase();
initdram(0);
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd,
CONFIG_SYS_NAND_U_BOOT_RELOC);
CONFIG_SYS_NAND_U_BOOT_RELOC);
}
void board_init_r(gd_t *gd, ulong dest_addr)

4
board/freescale/mpc8360emds/mpc8360emds.c
View File

@@ -427,7 +427,7 @@ void ft_board_setup(void *blob, bd_t *bd)
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
"phy-connection-type", 0);
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
PHY_INTERFACE_MODE_RGMII_RXID);
@@ -439,7 +439,7 @@ void ft_board_setup(void *blob, bd_t *bd)
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
"phy-connection-type", 0);
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
PHY_INTERFACE_MODE_RGMII_RXID);

6
board/funkwerk/vovpn-gw/vovpn-gw.c
View File

@@ -270,9 +270,9 @@ int misc_init_r (void)
for (i = 0; i < 64; i++) {
c = *dummy;
printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
memctl->memc_mamr,
memctl->memc_mar,
memctl->memc_mdr );
memctl->memc_mamr,
memctl->memc_mar,
memctl->memc_mdr );
}
memctl->memc_mamr = 0x00044440;
#endif

2
board/gen860t/flash.c
View File

@@ -182,7 +182,7 @@ flash_get_offsets (ulong base, flash_info_t *info)
default:
printf ("Don't know sector offsets for FLASH"
" type 0x%lx\n", info->flash_id);
" type 0x%lx\n", info->flash_id);
return;
}
}

4
board/incaip/incaip.c
View File

@@ -58,9 +58,9 @@ phys_size_t initdram(int board_type)
for (rows = 0xB; rows <= 0xD; rows++)
{
*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
(rows << 4) | cols;
(rows << 4) | cols;
size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
max_sdram_size());
max_sdram_size());
if (size > max_size)
{

2
board/matrix_vision/mvbc_p/Makefile
View File

@@ -19,7 +19,7 @@ OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
$(call cmd_link_o_target, $(OBJS))
#########################################################################

2
board/matrix_vision/mvsmr/Makefile
View File

@@ -19,7 +19,7 @@ OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
$(call cmd_link_o_target, $(OBJS))
@mkimage -T script -C none -n mvSMR_Script -d bootscript $(obj)bootscript.img
#########################################################################

122
board/openrisc/openrisc-generic/or1ksim.cfg
View File

@@ -20,8 +20,8 @@ the simulator.
not found too, it reverts to the built-in default configuration.
NOTE: Users should not rely on the built-in configuration, since the
default configuration may differ between version.
Rather create a configuration file that sets all critical values.
default configuration may differ between version.
Rather create a configuration file that sets all critical values.
This file may contain (standard C) comments only - no // support.
@@ -306,7 +306,7 @@ end
debug = 0-9
0 : no debug messages
1-9: debug message level.
higher numbers produce more messages
higher numbers produce more messages
profile = 0/1
'0': don't generate profiling file 'sim.profile'
@@ -375,11 +375,11 @@ end
Core Verification.
enabled = 0/1
'0': disbable VAPI server
'1': enable/start VAPI server
'0': disbable VAPI server
'1': enable/start VAPI server
server_port = <value>
TCP/IP port to start VAPI server on
TCP/IP port to start VAPI server on
log_enabled = 0/1
'0': disable VAPI requests logging
@@ -565,56 +565,56 @@ end
This section configures the UARTs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first UART register for this device
address of first UART register for this device
channel = <channeltype>:<args>
The channel parameter indicates the source of received UART characters
and the sink for transmitted UART characters.
The channel parameter indicates the source of received UART characters
and the sink for transmitted UART characters.
The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
(without quotes).
The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
(without quotes).
A) To send/receive characters from a pair of files, use a file
channel:
A) To send/receive characters from a pair of files, use a file
channel:
channel=file:<rxfile>,<txfile>
channel=file:<rxfile>,<txfile>
B) To create an interactive terminal window, use an xterm channel:
channel=xterm:[<xterm_arg>]*
channel=xterm:[<xterm_arg>]*
C) To create a bidirectional tcp socket which one could, for example,
access via telnet, use a tcp channel:
access via telnet, use a tcp channel:
channel=tcp:<port number>
channel=tcp:<port number>
D) To cause the UART to read/write from existing numeric file
descriptors, use an fd channel:
descriptors, use an fd channel:
channel=fd:<rx file descriptor num>,<tx file descriptor num>
channel=fd:<rx file descriptor num>,<tx file descriptor num>
E) To connect the UART to a physical serial port, create a tty
channel:
E) To connect the UART to a physical serial port, create a tty
channel:
channel=tty:device=/dev/ttyS0,baud=9600
irq = <value>
irq number for this device
irq number for this device
16550 = 0/1
'0': this device is a UART16450
'1': this device is a UART16550
'0': this device is a UART16450
'1': this device is a UART16550
jitter = <value>
in msecs... time to block, -1 to disable it
in msecs... time to block, -1 to disable it
vapi_id = <hex_value>
VAPI id of this instance
VAPI id of this instance
*/
section uart
@@ -634,16 +634,16 @@ end
This section configures the DMAs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first DMA register for this device
address of first DMA register for this device
irq = <value>
irq number for this device
irq number for this device
vapi_id = <hex_value>
VAPI id of this instance
VAPI id of this instance
*/
section dma
@@ -658,37 +658,37 @@ end
This section configures the ETHERNETs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first ethernet register for this device
address of first ethernet register for this device
dma = <value>
which controller is this ethernet "connected" to
which controller is this ethernet "connected" to
irq = <value>
ethernet mac IRQ level
ethernet mac IRQ level
rtx_type = <value>
use 0 - file interface, 1 - socket interface
use 0 - file interface, 1 - socket interface
rx_channel = <value>
DMA channel used for RX
DMA channel used for RX
tx_channel = <value>
DMA channel used for TX
DMA channel used for TX
rxfile = "<filename>"
filename, where to read data from
filename, where to read data from
txfile = "<filename>"
filename, where to write data to
filename, where to write data to
sockif = "<ifacename>"
interface name of ethernet socket
interface name of ethernet socket
vapi_id = <hex_value>
VAPI id of this instance
VAPI id of this instance
*/
section ethernet
@@ -711,16 +711,16 @@ end
This section configures the GPIOs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first GPIO register for this device
address of first GPIO register for this device
irq = <value>
irq number for this device
irq number for this device
base_vapi_id = <hex_value>
first VAPI id of this instance
first VAPI id of this instance
GPIO uses 8 consecutive VAPI IDs
*/
@@ -736,19 +736,19 @@ end
This section configures the VGA/LCD controller
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first VGA register
address of first VGA register
irq = <value>
irq number for this device
irq number for this device
refresh_rate = <value>
number of cycles between screen dumps
number of cycles between screen dumps
filename = "<filename>"
template name for generated names (e.g. "primary" produces "primary0023.bmp")
template name for generated names (e.g. "primary" produces "primary0023.bmp")
*/
section vga
@@ -825,39 +825,39 @@ end
This section configures the ATA/ATAPI host controller
baseaddr = <hex_value>
address of first ATA register
address of first ATA register
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
Enable/disable the peripheral. By default if it is enabled.
irq = <value>
irq number for this device
irq number for this device
debug = <value>
debug level for ata models.
debug level for ata models.
0: no debug messages
1: verbose messages
3: normal messages (more messages than verbose)
5: debug messages (normal debug messages)
5: debug messages (normal debug messages)
7: flow control messages (debug statemachine flows)
9: low priority message (display everything the code does)
dev_type0/1 = <value>
ata device 0 type
0: NO_CONNeCT: none (not connected)
ata device 0 type
0: NO_CONNeCT: none (not connected)
1: FILE : simulated harddisk
2: LOCAL : local system harddisk
dev_file0/1 = "<filename>"
filename for simulated ATA device
filename for simulated ATA device
valid only if dev_type0 == 1
dev_size0/1 = <value>
size of simulated hard-disk (in MBytes)
size of simulated hard-disk (in MBytes)
valid only if dev_type0 == 1
dev_packet0/1 = <value>
0: simulated ATA device does NOT implement PACKET command feature set
0: simulated ATA device does NOT implement PACKET command feature set
1: simulated ATA device does implement PACKET command feature set
FIXME: irq number

2
board/ppmc8260/strataflash.c
View File

@@ -407,7 +407,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout
printf("Command Sequence Error.\n");
} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
printf("Block Erase Error.\n");
retcode = ERR_NOT_ERASED;
retcode = ERR_NOT_ERASED;
} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
printf("Locking Error\n");
}

6
board/pxa255_idp/pxa_reg_calcs.py
View File

@@ -21,7 +21,7 @@ class gpio:
self.clr = clr
self.alt = alt
self.desc = desc
# the following is a dictionary of all GPIOs in the system
# the key is the GPIO number
@@ -280,8 +280,8 @@ for reg in registers:
# print define to past right into U-Boot source code
print
print
print
print
for reg in registers:
print '#define %s 0x%x' % (uboot_reg_names[reg], pxa_regs[reg])

2
board/rbc823/rbc823.c
View File

@@ -78,7 +78,7 @@ const uint static_table[] =
0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
0xFFFFFC04, 0xFFFFFC05, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,

6
board/samsung/dts/exynos5250-snow.dts
View File

@@ -71,9 +71,9 @@
codec-enable-gpio = <&gpio 0xb7 0>;
};
sound@12d60000 {
status = "disabled";
};
sound@12d60000 {
status = "disabled";
};
i2c@12cd0000 {
soundcodec@22 {

2
board/svm_sc8xx/svm_sc8xx.c
View File

@@ -139,6 +139,6 @@ phys_size_t initdram (int board_type)
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
doc_probe (CONFIG_SYS_DOC_BASE);
doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif