omap4: sdram init changes for omap4460

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
This commit is contained in:
Aneesh V
2011-07-21 09:29:26 -04:00
committed by U-Boot
parent 5ab12a9eeb
commit 924eb369e3
2 changed files with 30 additions and 19 deletions

View File

@@ -151,22 +151,13 @@ static void emif_update_timings(u32 base, const struct emif_regs *regs)
writel(regs->zq_config, &emif->emif_zq_config);
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
/*
* Workaround:
* In a specific situation, the OCP interface between the DMM and
* EMIF may hang.
* 1. A TILER port is used to perform 2D burst writes of
* width 1 and height 8
* 2. ELLAn port is used to perform reads
* 3. All accesses are routed to the same EMIF controller
*
* Work around to avoid this issue REG_SYS_THRESH_MAX value should
* be kept higher than default 0x7. As per recommondation 0x0A will
* be used for better performance with REG_LL_THRESH_MAX = 0x00
*/
if (omap_revision() == OMAP4430_ES1_0) {
writel(EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00,
&emif->emif_l3_config);
if (omap_revision() >= OMAP4460_ES1_0) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
&emif->emif_l3_config);
} else {
writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
&emif->emif_l3_config);
}
}
@@ -504,7 +495,7 @@ static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
{
u32 idle = 0, val = 0;
if (volt_ramp)
val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 + 1;
val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
else
/*Maximum value in normal conditions - suggested by hw team */
val = 0x1FF;
@@ -1237,6 +1228,20 @@ static void dmm_init(u32 base)
&hw_lisa_map_regs->dmm_lisa_map_1);
writel(lisa_map_regs->dmm_lisa_map_0,
&hw_lisa_map_regs->dmm_lisa_map_0);
if (omap_revision() >= OMAP4460_ES1_0) {
hw_lisa_map_regs =
(struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
writel(lisa_map_regs->dmm_lisa_map_3,
&hw_lisa_map_regs->dmm_lisa_map_3);
writel(lisa_map_regs->dmm_lisa_map_2,
&hw_lisa_map_regs->dmm_lisa_map_2);
writel(lisa_map_regs->dmm_lisa_map_1,
&hw_lisa_map_regs->dmm_lisa_map_1);
writel(lisa_map_regs->dmm_lisa_map_0,
&hw_lisa_map_regs->dmm_lisa_map_0);
}
}
/*