mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
This commit is contained in:
Joe Hershberger
Kim Phillips
parent
9a9865508f
commit
8d85808fa1
@ -88,17 +88,17 @@
|
||||
|
||||
/* Arbiter Configuration Register */
|
||||
#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
|
||||
#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
|
||||
#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
|
||||
|
||||
/* System Priority Control Register */
|
||||
#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1/2 emergency has highest priority */
|
||||
#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1/2 emergency has highest priority */
|
||||
|
||||
/*
|
||||
* IP blocks clock configuration
|
||||
*/
|
||||
#define CONFIG_SYS_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */
|
||||
#define CONFIG_SYS_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */
|
||||
#define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* CSB:SATA[0:3] = 2:1 */
|
||||
#define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* CSB:SATA[0:3] = 2:1 */
|
||||
|
||||
/*
|
||||
* System IO Config
|
||||
@ -146,46 +146,47 @@
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_SIZE 512 /* MB */
|
||||
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG ( CSCONFIG_EN \
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
|
||||
| 0x00010000 /* ODT_WR to CSn */ \
|
||||
| CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
|
||||
| CSCONFIG_ROW_BIT_14 \
|
||||
| CSCONFIG_COL_BIT_10)
|
||||
/* 0x80010202 */
|
||||
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
|
||||
#define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
|
||||
| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
|
||||
| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
|
||||
| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
|
||||
| ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
|
||||
| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
|
||||
#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
|
||||
| (0 << TIMING_CFG0_WRT_SHIFT) \
|
||||
| (0 << TIMING_CFG0_RRT_SHIFT) \
|
||||
| (0 << TIMING_CFG0_WWT_SHIFT) \
|
||||
| (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
|
||||
| (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
|
||||
| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
|
||||
| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
|
||||
/* 0x00620802 */
|
||||
#define CONFIG_SYS_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
|
||||
| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
|
||||
| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
|
||||
| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
|
||||
| (13 << TIMING_CFG1_REFREC_SHIFT ) \
|
||||
| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
|
||||
#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
|
||||
| (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
|
||||
| (3 << TIMING_CFG1_ACTTORW_SHIFT) \
|
||||
| (5 << TIMING_CFG1_CASLAT_SHIFT) \
|
||||
| (13 << TIMING_CFG1_REFREC_SHIFT) \
|
||||
| (3 << TIMING_CFG1_WRREC_SHIFT) \
|
||||
| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
|
||||
| (2 << TIMING_CFG1_WRTORD_SHIFT))
|
||||
/* 0x3935d322 */
|
||||
#define CONFIG_SYS_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
|
||||
| ( 6 << TIMING_CFG2_CPO_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
|
||||
| ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
|
||||
| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
|
||||
| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
|
||||
| ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
|
||||
#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
|
||||
| (6 << TIMING_CFG2_CPO_SHIFT) \
|
||||
| (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
|
||||
| (4 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
|
||||
| (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
|
||||
| (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
|
||||
| (8 << TIMING_CFG2_FOUR_ACT_SHIFT))
|
||||
/* 0x131088c8 */
|
||||
#define CONFIG_SYS_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
|
||||
| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
|
||||
#define CONFIG_SYS_DDR_INTERVAL ((0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT) \
|
||||
| (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
|
||||
/* 0x03E00100 */
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */
|
||||
#define CONFIG_SYS_DDR_MODE ( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
|
||||
| ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
|
||||
#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
|
||||
| (0x1432 << SDRAM_MODE_SD_SHIFT))
|
||||
/* ODT 150ohm CL=3, AL=1 on SDRAM */
|
||||
#define CONFIG_SYS_DDR_MODE2 0x00000000
|
||||
#define CONFIG_SYS_DDR_MODE2 0x00000000
|
||||
#endif
|
||||
|
||||
/*
|
||||
@ -207,8 +208,8 @@
|
||||
#endif
|
||||
|
||||
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
|
||||
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
|
||||
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
|
||||
|
||||
/*
|
||||
* Initial RAM Base Address Setup
|
||||
@ -216,7 +217,8 @@
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/*
|
||||
* Local Bus Configuration & Clock Setup
|
||||
@ -229,19 +231,20 @@
|
||||
/*
|
||||
* FLASH on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
|
||||
#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
|
||||
#define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
|
||||
#define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */
|
||||
/* Window base at flash base */
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
|
||||
|
||||
#define CONFIG_SYS_BR0_PRELIM ( CONFIG_SYS_FLASH_BASE /* Flash Base address */ \
|
||||
| (2 << BR_PS_SHIFT) /* 16 bit port size */ \
|
||||
| BR_V ) /* valid */
|
||||
#define CONFIG_SYS_OR0_PRELIM ( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
|
||||
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \
|
||||
| (2 << BR_PS_SHIFT) /* 16 bit port */ \
|
||||
| BR_V) /* valid */
|
||||
#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
|
||||
| OR_UPM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_ACS_DIV2 \
|
||||
@ -249,7 +252,7 @@
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX \
|
||||
| OR_GPCM_EHTR \
|
||||
| OR_GPCM_EAD )
|
||||
| OR_GPCM_EAD)
|
||||
/* 0xFE000FF7 */
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
@ -263,11 +266,13 @@
|
||||
* BCSR on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_BCSR 0xF8000000
|
||||
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR /* Access window base at BCSR base */
|
||||
/* Access window base at BCSR base */
|
||||
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR
|
||||
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
|
||||
|
||||
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
|
||||
#define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
|
||||
/* Port size=8bit, MSEL=GPCM */
|
||||
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00000801)
|
||||
#define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
|
||||
|
||||
/*
|
||||
* NAND Flash on the Local Bus
|
||||
@ -275,22 +280,22 @@
|
||||
#define CONFIG_CMD_NAND 1
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_NAND_FSL_ELBC 1
|
||||
#define CONFIG_NAND_FSL_ELBC 1
|
||||
|
||||
#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
|
||||
#define CONFIG_SYS_BR3_PRELIM ( CONFIG_SYS_NAND_BASE \
|
||||
#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
|
||||
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE \
|
||||
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
||||
| BR_PS_8 /* Port Size = 8 bit */ \
|
||||
| BR_PS_8 /* 8 bit port */ \
|
||||
| BR_MS_FCM /* MSEL = FCM */ \
|
||||
| BR_V ) /* valid */
|
||||
#define CONFIG_SYS_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \
|
||||
| BR_V) /* valid */
|
||||
#define CONFIG_SYS_OR3_PRELIM (0xFFFF8000 /* length 32K */ \
|
||||
| OR_FCM_BCTLD \
|
||||
| OR_FCM_CST \
|
||||
| OR_FCM_CHT \
|
||||
| OR_FCM_SCY_1 \
|
||||
| OR_FCM_RST \
|
||||
| OR_FCM_TRLX \
|
||||
| OR_FCM_EHTR )
|
||||
| OR_FCM_EHTR)
|
||||
/* 0xFFFF919E */
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_NAND_BASE
|
||||
@ -306,7 +311,7 @@
|
||||
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||
|
||||
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
|
||||
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
|
||||
@ -326,11 +331,11 @@
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CONFIG_FSL_I2C
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_I2C_NOPROBES {0x51} /* Don't probe these addrs */
|
||||
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||||
#define CONFIG_SYS_I2C2_OFFSET 0x3100
|
||||
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||||
#define CONFIG_SYS_I2C2_OFFSET 0x3100
|
||||
|
||||
/*
|
||||
* Config on-board RTC
|
||||
@ -342,9 +347,9 @@
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CONFIG_SYS_PCI_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
|
||||
#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
|
||||
#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000
|
||||
#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */
|
||||
@ -397,9 +402,9 @@ extern int board_pci_host_broken(void);
|
||||
*/
|
||||
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
|
||||
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
|
||||
#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
|
||||
#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
|
||||
#define CONFIG_SYS_TSEC2_OFFSET 0x25000
|
||||
#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
|
||||
#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
|
||||
|
||||
/*
|
||||
* TSEC ethernet configuration
|
||||
@ -435,12 +440,12 @@ extern int board_pci_host_broken(void);
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1_OFFSET 0x18000
|
||||
#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
#define CONFIG_SATA2
|
||||
#define CONFIG_SYS_SATA2_OFFSET 0x19000
|
||||
#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
|
||||
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
|
||||
#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
|
||||
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
|
||||
|
||||
#ifdef CONFIG_FSL_SATA
|
||||
#define CONFIG_LBA48
|
||||
@ -454,11 +459,12 @@ extern int board_pci_host_broken(void);
|
||||
*/
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_ADDR \
|
||||
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
@ -526,17 +532,19 @@ extern int board_pci_host_broken(void);
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 256 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
|
||||
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Core HID Setup
|
||||
@ -555,53 +563,93 @@ extern int board_pci_host_broken(void);
|
||||
#define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000)
|
||||
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
|
||||
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
||||
|
||||
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
||||
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
||||
|
||||
/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR \
|
||||
| BATU_BL_8M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
|
||||
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
|
||||
|
||||
/* BCSR: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_BCSR | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_BCSR \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_BCSR \
|
||||
| BATU_BL_128K \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
|
||||
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
||||
|
||||
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE \
|
||||
| BATU_BL_32M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
||||
|
||||
/* Stack in dcache: cacheable, no memory coherence */
|
||||
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \
|
||||
| BATU_BL_128K \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
|
||||
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
/* PCI MEM space: cacheable */
|
||||
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
||||
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
||||
/* PCI MMIO space: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
|
||||
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
||||
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
||||
#else
|
||||
@ -639,30 +687,31 @@ extern int board_pci_host_broken(void);
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=1000000\0" \
|
||||
"ramdiskfile=ramfs.83xx\0" \
|
||||
"fdtaddr=780000\0" \
|
||||
"fdtfile=mpc8379_mds.dtb\0" \
|
||||
""
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=1000000\0" \
|
||||
"ramdiskfile=ramfs.83xx\0" \
|
||||
"fdtaddr=780000\0" \
|
||||
"fdtfile=mpc8379_mds.dtb\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
|
||||
"$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
Loading…
Reference in New Issue
Block a user