From 63b2316c5c4ba0e47d1f69ef1372db4fd89b6bf5 Mon Sep 17 00:00:00 2001 From: Ashish Kumar Date: Fri, 11 Aug 2017 11:09:14 +0530 Subject: [PATCH 01/33] fsl-layerscape: Consolidate registers space defination for CCI-400 bus CoreLink Cache Coherent Interconnect (CCI) provides full cache coherency between two clusters of multi-core CPUs and I/O coherency for devices and I/O masters. This patch add new config option SYS_FSL_HAS_CCI400 and moves existing register space definaton of CCI-400 bus to fsl_immap to be shared. CONFIG_SYS_CCI400_ADDR is replaced with SYS_CCI400_OFFSET in Kconfig. Signed-off-by: Ashish Kumar Signed-off-by: Prabhakar Kushwaha [YS: revised commit message, squashed patches for armv8 and armv7] Reviewed-by: York Sun --- README | 9 ++++ arch/arm/cpu/armv7/ls102xa/Kconfig | 12 +++++ arch/arm/cpu/armv7/ls102xa/soc.c | 3 +- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 13 +++++ arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 1 + arch/arm/cpu/armv8/fsl-layerscape/soc.c | 10 ++-- .../asm/arch-fsl-layerscape/immap_lsch2.h | 49 ------------------ arch/arm/include/asm/arch-ls102xa/config.h | 1 - .../include/asm/arch-ls102xa/immap_ls102xa.h | 47 +---------------- board/freescale/ls1012afrdm/ls1012afrdm.c | 4 +- board/freescale/ls1012aqds/ls1012aqds.c | 4 +- board/freescale/ls1012ardb/ls1012ardb.c | 3 +- board/freescale/ls1021aqds/ls1021aqds.c | 9 ++-- include/fsl_immap.h | 51 +++++++++++++++++++ scripts/config_whitelist.txt | 1 - 15 files changed, 109 insertions(+), 108 deletions(-) diff --git a/README b/README index a46850c808..c0c8b559f9 100644 --- a/README +++ b/README @@ -312,6 +312,15 @@ Many of the options are named exactly as the corresponding Linux kernel configuration options. The intention is to make it easier to build a config tool - later. +- ARM Platform Bus Type(CCI): + CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which + provides full cache coherency between two clusters of multi-core + CPUs and I/O coherency for devices and I/O masters + + CONFIG_SYS_FSL_HAS_CCI400 + + Defined For SoC that has cache coherent interconnect + CCN-400 The following options need to be configured: diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index fadfce4f05..90d99e6cc3 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -5,6 +5,7 @@ config ARCH_LS1021A select SYS_FSL_ERRATUM_A009663 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 + select SYS_FSL_HAS_CCI400 select SYS_FSL_SRDS_1 select SYS_HAS_SERDES select SYS_FSL_DDR_BE if SYS_FSL_DDR @@ -49,9 +50,20 @@ config SECURE_BOOT Enable Freescale Secure Boot feature. Normally selected by defconfig. If unsure, do not change. +config SYS_CCI400_OFFSET + hex "Offset for CCI400 base" + depends on SYS_FSL_HAS_CCI400 + default 0x180000 + help + Offset for CCI400 base. + CCI400 base addr = CCSRBAR + CCI400_OFFSET + config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" +config SYS_FSL_HAS_CCI400 + bool + config SYS_FSL_SRDS_1 bool diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index b84a1a686a..c043b82ab7 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -80,7 +80,8 @@ void erratum_a010315(void) int arch_soc_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); unsigned int major; #ifdef CONFIG_LAYERSCAPE_NS_ACCESS diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index cdeef26fe5..3e02132537 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -85,6 +85,7 @@ config ARCH_LS2080A config FSL_LSCH2 bool + select SYS_FSL_HAS_CCI400 select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_BE @@ -248,6 +249,15 @@ config QSPI_AHB_INIT But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB bus for those flashes to support the full QSPI flash size. +config SYS_CCI400_OFFSET + hex "Offset for CCI400 base" + depends on SYS_FSL_HAS_CCI400 + default 0x3090000 if ARCH_LS1088A + default 0x180000 if FSL_LSCH2 + help + Offset for CCI400 base + CCI400 base addr = CCSRBAR + CCI400_OFFSET + config SYS_FSL_IFC_BANK_COUNT int "Maximum banks of Integrated flash controller" depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A @@ -255,6 +265,9 @@ config SYS_FSL_IFC_BANK_COUNT default 4 if ARCH_LS1046A default 8 if ARCH_LS2080A +config SYS_FSL_HAS_CCI400 + bool + config SYS_FSL_HAS_DP_DDR bool diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index c6fede31ba..ec5806517a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 639e9d2ddc..339ff0c4c7 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -5,6 +5,7 @@ */ #include +#include #include #include #include @@ -285,7 +286,8 @@ static void erratum_a008850_early(void) { #ifdef CONFIG_SYS_FSL_ERRATUM_A008850 /* part 1 of 2 */ - struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; /* Skip if running at lower exception level */ @@ -304,7 +306,8 @@ void erratum_a008850_post(void) { #ifdef CONFIG_SYS_FSL_ERRATUM_A008850 /* part 2 of 2 */ - struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; u32 tmp; @@ -439,7 +442,8 @@ int setup_chip_volt(void) void fsl_lsch2_early_init_f(void) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; #ifdef CONFIG_LAYERSCAPE_NS_ACCESS diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 4afc338b8e..f169724379 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_DCSR_COP_CCP_ADDR (CONFIG_SYS_DCSRBAR + 0x02008040) #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) -#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) #define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000) #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) #define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000) @@ -544,54 +543,6 @@ struct ccsr_serdes { u8 res_19a0[0x2000-0x19a0]; /* from 0x19a0 to 0x1fff */ }; -#define CCI400_CTRLORD_TERM_BARRIER 0x00000008 -#define CCI400_CTRLORD_EN_BARRIER 0 -#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 -#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002 -#define CCI400_SNOOP_REQ_EN 0x00000001 - -/* CCI-400 registers */ -struct ccsr_cci400 { - u32 ctrl_ord; /* Control Override */ - u32 spec_ctrl; /* Speculation Control */ - u32 secure_access; /* Secure Access */ - u32 status; /* Status */ - u32 impr_err; /* Imprecise Error */ - u8 res_14[0x100 - 0x14]; - u32 pmcr; /* Performance Monitor Control */ - u8 res_104[0xfd0 - 0x104]; - u32 pid[8]; /* Peripheral ID */ - u32 cid[4]; /* Component ID */ - struct { - u32 snoop_ctrl; /* Snoop Control */ - u32 sha_ord; /* Shareable Override */ - u8 res_1008[0x1100 - 0x1008]; - u32 rc_qos_ord; /* read channel QoS Value Override */ - u32 wc_qos_ord; /* read channel QoS Value Override */ - u8 res_1108[0x110c - 0x1108]; - u32 qos_ctrl; /* QoS Control */ - u32 max_ot; /* Max OT */ - u8 res_1114[0x1130 - 0x1114]; - u32 target_lat; /* Target Latency */ - u32 latency_regu; /* Latency Regulation */ - u32 qos_range; /* QoS Range */ - u8 res_113c[0x2000 - 0x113c]; - } slave[5]; /* Slave Interface */ - u8 res_6000[0x9004 - 0x6000]; - u32 cycle_counter; /* Cycle counter */ - u32 count_ctrl; /* Count Control */ - u32 overflow_status; /* Overflow Flag Status */ - u8 res_9010[0xa000 - 0x9010]; - struct { - u32 event_select; /* Event Select */ - u32 event_count; /* Event Count */ - u32 counter_ctrl; /* Counter Control */ - u32 overflow_status; /* Overflow Flag Status */ - u8 res_a010[0xb000 - 0xa010]; - } pcounter[4]; /* Performance Counter */ - u8 res_e004[0x10000 - 0xe004]; -}; - /* MMU 500 */ #define SMMU_SCR0 (SMMU_BASE + 0x0) #define SMMU_SCR1 (SMMU_BASE + 0x4) diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index fc954c5366..ff0fc47021 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -20,7 +20,6 @@ #define SYS_FSL_GIC_ADDR (CONFIG_SYS_IMMR + 0x00400000) #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) -#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) #define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index c34fd63e66..1415b0b6ff 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -6,6 +6,7 @@ #ifndef __ASM_ARCH_LS102XA_IMMAP_H_ #define __ASM_ARCH_LS102XA_IMMAP_H_ +#include #define SVR_MAJ(svr) (((svr) >> 4) & 0xf) #define SVR_MIN(svr) (((svr) >> 0) & 0xf) @@ -374,53 +375,7 @@ struct ccsr_serdes { u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */ }; -#define CCI400_CTRLORD_TERM_BARRIER 0x00000008 -#define CCI400_CTRLORD_EN_BARRIER 0 -#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 -#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002 -#define CCI400_SNOOP_REQ_EN 0x00000001 -/* CCI-400 registers */ -struct ccsr_cci400 { - u32 ctrl_ord; /* Control Override */ - u32 spec_ctrl; /* Speculation Control */ - u32 secure_access; /* Secure Access */ - u32 status; /* Status */ - u32 impr_err; /* Imprecise Error */ - u8 res_14[0x100 - 0x14]; - u32 pmcr; /* Performance Monitor Control */ - u8 res_104[0xfd0 - 0x104]; - u32 pid[8]; /* Peripheral ID */ - u32 cid[4]; /* Component ID */ - struct { - u32 snoop_ctrl; /* Snoop Control */ - u32 sha_ord; /* Shareable Override */ - u8 res_1008[0x1100 - 0x1008]; - u32 rc_qos_ord; /* read channel QoS Value Override */ - u32 wc_qos_ord; /* read channel QoS Value Override */ - u8 res_1108[0x110c - 0x1108]; - u32 qos_ctrl; /* QoS Control */ - u32 max_ot; /* Max OT */ - u8 res_1114[0x1130 - 0x1114]; - u32 target_lat; /* Target Latency */ - u32 latency_regu; /* Latency Regulation */ - u32 qos_range; /* QoS Range */ - u8 res_113c[0x2000 - 0x113c]; - } slave[5]; /* Slave Interface */ - u8 res_6000[0x9004 - 0x6000]; - u32 cycle_counter; /* Cycle counter */ - u32 count_ctrl; /* Count Control */ - u32 overflow_status; /* Overflow Flag Status */ - u8 res_9010[0xa000 - 0x9010]; - struct { - u32 event_select; /* Event Select */ - u32 event_count; /* Event Count */ - u32 counter_ctrl; /* Counter Control */ - u32 overflow_status; /* Overflow Flag Status */ - u8 res_a010[0xb000 - 0xa010]; - } pcounter[4]; /* Performance Counter */ - u8 res_e004[0x10000 - 0xe004]; -}; /* AHCI (sata) register map */ struct ccsr_ahci { diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c index 25d22d25bf..9afd1c469e 100644 --- a/board/freescale/ls1012afrdm/ls1012afrdm.c +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c @@ -71,7 +71,9 @@ int board_early_init_f(void) int board_init(void) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); + /* * Set CCI-400 control override register to enable barrier * transaction diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index 97ab3400ad..406194da27 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -106,8 +106,8 @@ int misc_init_r(void) int board_init(void) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *) - CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); /* Set CCI-400 control override register to enable barrier * transaction */ diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index a21e4c4aeb..c6c1c71202 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -104,7 +104,8 @@ int board_early_init_f(void) int board_init(void) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); /* * Set CCI-400 control override register to enable barrier * transaction diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index d81d8abc9b..8b3f4ad78d 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -204,7 +204,8 @@ int board_early_init_f(void) #ifdef CONFIG_SPL_BUILD void board_init_f(ulong dummy) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); unsigned int major; #ifdef CONFIG_NAND_BOOT @@ -425,7 +426,8 @@ int misc_init_r(void) int board_init(void) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); unsigned int major; #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 @@ -460,7 +462,8 @@ int board_init(void) #if defined(CONFIG_DEEP_SLEEP) void board_sleep_prepare(void) { - struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR; + struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); unsigned int major; major = get_soc_major_rev(); diff --git a/include/fsl_immap.h b/include/fsl_immap.h index b1c4fe7969..4f5a19cdc1 100644 --- a/include/fsl_immap.h +++ b/include/fsl_immap.h @@ -133,4 +133,55 @@ struct ccsr_ddr { u8 res_e5c[164]; u32 debug[64]; /* debug_1 to debug_64 */ }; + +#ifdef CONFIG_SYS_FSL_HAS_CCI400 +#define CCI400_CTRLORD_TERM_BARRIER 0x00000008 +#define CCI400_CTRLORD_EN_BARRIER 0 +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 +#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002 +#define CCI400_SNOOP_REQ_EN 0x00000001 + +/* CCI-400 registers */ +struct ccsr_cci400 { + u32 ctrl_ord; /* Control Override */ + u32 spec_ctrl; /* Speculation Control */ + u32 secure_access; /* Secure Access */ + u32 status; /* Status */ + u32 impr_err; /* Imprecise Error */ + u8 res_14[0x100 - 0x14]; + u32 pmcr; /* Performance Monitor Control */ + u8 res_104[0xfd0 - 0x104]; + u32 pid[8]; /* Peripheral ID */ + u32 cid[4]; /* Component ID */ + struct { + u32 snoop_ctrl; /* Snoop Control */ + u32 sha_ord; /* Shareable Override */ + u8 res_1008[0x1100 - 0x1008]; + u32 rc_qos_ord; /* read channel QoS Value Override */ + u32 wc_qos_ord; /* read channel QoS Value Override */ + u8 res_1108[0x110c - 0x1108]; + u32 qos_ctrl; /* QoS Control */ + u32 max_ot; /* Max OT */ + u8 res_1114[0x1130 - 0x1114]; + u32 target_lat; /* Target Latency */ + u32 latency_regu; /* Latency Regulation */ + u32 qos_range; /* QoS Range */ + u8 res_113c[0x2000 - 0x113c]; + } slave[5]; /* Slave Interface */ + u8 res_6000[0x9004 - 0x6000]; + u32 cycle_counter; /* Cycle counter */ + u32 count_ctrl; /* Count Control */ + u32 overflow_status; /* Overflow Flag Status */ + u8 res_9010[0xa000 - 0x9010]; + struct { + u32 event_select; /* Event Select */ + u32 event_count; /* Event Count */ + u32 counter_ctrl; /* Counter Control */ + u32 overflow_status; /* Overflow Flag Status */ + u8 res_a010[0xb000 - 0xa010]; + } pcounter[4]; /* Performance Counter */ + u8 res_e004[0x10000 - 0xe004]; +}; +#endif + #endif /* __FSL_IMMAP_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 9ce0c3f039..9619db6928 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2435,7 +2435,6 @@ CONFIG_SYS_CACHE_STASHING CONFIG_SYS_CADMUS_BASE_REG CONFIG_SYS_CBSIZE CONFIG_SYS_CCCR -CONFIG_SYS_CCI400_ADDR CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_HIGH From a7a81756b8851b84de11c8e755b2e63d907336d4 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Mon, 14 Aug 2017 10:22:43 +0800 Subject: [PATCH 02/33] QE: Set QE_IRAM_READY after uploading firmware QE_IRAM_READY should be set only after successfully uploading the firmware. Signed-off-by: Zhao Qiang Reviewed-by: York Sun --- drivers/qe/qe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 24e764dc7c..8151068432 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -225,8 +225,8 @@ void u_qe_init(void) flush_cache((ulong)addr, cnt * 512); } #endif - u_qe_upload_firmware(addr); - out_be32(&qe_immr->iram.iready, QE_IRAM_READY); + if (!u_qe_upload_firmware(addr)) + out_be32(&qe_immr->iram.iready, QE_IRAM_READY); #ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC free(addr); #endif From 06fb06f66c57912b53bda9fd1772d5d069433cbd Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Wed, 16 Aug 2017 07:13:28 -0400 Subject: [PATCH 03/33] SECURE_BOOT: Unify memory map for Layerscape based platforms Unify memory map for Layerscape based platforms. This patch includes changes in bootscript, bootscript header and PPA header addresses change as per unified memory map. Signed-off-by: Sumit Garg Tested-by: Vinitha Pillai Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 12 ++--- arch/arm/include/asm/fsl_secure_boot.h | 54 +++++++++-------------- 2 files changed, 28 insertions(+), 38 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 3e02132537..a77a68d84e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -196,12 +196,12 @@ config SYS_LS_PPA_FW_ADDR config SYS_LS_PPA_ESBC_ADDR hex "hdr address of PPA firmware loading from" depends on FSL_LS_PPA && CHAIN_OF_TRUST - default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A - default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A - default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 - default 0x700000 if SYS_LS_PPA_FW_IN_MMC - default 0x700000 if SYS_LS_PPA_FW_IN_NAND + default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + default 0x680000 if SYS_LS_PPA_FW_IN_MMC + default 0x680000 if SYS_LS_PPA_FW_IN_NAND help If the PPA header firmware locate at XIP flash, such as NOR or QSPI flash, this address is a directly memory-mapped. diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index b0b3b9377e..63845a2460 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -1,5 +1,6 @@ /* * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * SPDX-License-Identifier: GPL-2.0+ */ @@ -71,55 +72,44 @@ * DDR memory map */ #ifdef CONFIG_FSL_LSCH3 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x580d00000 -#define CONFIG_BS_ADDR_DEVICE 0x580e00000 -#define CONFIG_BS_HDR_ADDR_RAM 0xa0d00000 -#define CONFIG_BS_ADDR_RAM 0xa0e00000 -#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_ADDR_DEVICE 0x580600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x580640000 #define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_HDR_SIZE 0x00004000 +#define CONFIG_BS_ADDR_RAM 0xa0600000 +#define CONFIG_BS_HDR_ADDR_RAM 0xa0640000 #else #ifdef CONFIG_SD_BOOT /* For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ -#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000920 -#else -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 -#endif -#define CONFIG_BS_ADDR_DEVICE 0x00000940 -#define CONFIG_BS_HDR_SIZE 0x00000010 +#define CONFIG_BS_ADDR_DEVICE 0x00003000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00003200 #define CONFIG_BS_SIZE 0x00000008 +#define CONFIG_BS_HDR_SIZE 0x00000010 #elif defined(CONFIG_NAND_BOOT) -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000 -#define CONFIG_BS_ADDR_DEVICE 0x00802000 -#define CONFIG_BS_HDR_SIZE 0x00002000 -#define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_ADDR_DEVICE 0x00600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00640000 +#define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_HDR_SIZE 0x00002000 #elif defined(CONFIG_QSPI_BOOT) -#ifdef CONFIG_ARCH_LS1046A -#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000 -#define CONFIG_BS_ADDR_DEVICE 0x40800000 -#elif defined(CONFIG_ARCH_LS1012A) -#define CONFIG_BS_HDR_ADDR_DEVICE 0x400c0000 -#define CONFIG_BS_ADDR_DEVICE 0x40060000 -#else -#error "Platform not supported" -#endif -#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_ADDR_DEVICE 0x40600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x40640000 #define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_HDR_SIZE 0x00002000 #else /* Default NOR Boot */ -#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 -#define CONFIG_BS_ADDR_DEVICE 0x60060000 -#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_ADDR_DEVICE 0x60600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x60640000 #define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_HDR_SIZE 0x00002000 #endif -#define CONFIG_BS_HDR_ADDR_RAM 0x81000000 -#define CONFIG_BS_ADDR_RAM 0x81020000 +#define CONFIG_BS_ADDR_RAM 0x81000000 +#define CONFIG_BS_HDR_ADDR_RAM 0x81020000 #endif #ifdef CONFIG_BOOTSCRIPT_COPY_RAM -#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM #define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM +#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM #else #define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE /* BOOTSCRIPT_ADDR is not required */ From 15e7c681e171a761609bbf1571dc81486ba783af Mon Sep 17 00:00:00 2001 From: Udit Agarwal Date: Wed, 16 Aug 2017 07:13:29 -0400 Subject: [PATCH 04/33] LS2080ARDB: QSPI boot: Secure Boot image validation Adds header address for PPA to be validated during ESBC phase for ARCH_LS2088 and QSPI_BOOT. Moves sec_init prior to ppa_init(). It must be initialized before the PPA. Signed-off-by: Udit Agarwal [YS: revised commit message] Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 ++- arch/arm/include/asm/fsl_secure_boot.h | 5 +++++ board/freescale/ls2080aqds/ls2080aqds.c | 7 +++---- board/freescale/ls2080ardb/ls2080ardb.c | 4 ++++ 4 files changed, 14 insertions(+), 5 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index a77a68d84e..cdadd38a12 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -199,7 +199,8 @@ config SYS_LS_PPA_ESBC_ADDR default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A default 0x680000 if SYS_LS_PPA_FW_IN_MMC default 0x680000 if SYS_LS_PPA_FW_IN_NAND help diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 63845a2460..ec6463dbb8 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -72,8 +72,13 @@ * DDR memory map */ #ifdef CONFIG_FSL_LSCH3 +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_BS_ADDR_DEVICE 0x20600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x20640000 +#else /* NOR BOOT */ #define CONFIG_BS_ADDR_DEVICE 0x580600000 #define CONFIG_BS_HDR_ADDR_DEVICE 0x580640000 +#endif /*ifdef CONFIG_QSPI_BOOT */ #define CONFIG_BS_SIZE 0x00001000 #define CONFIG_BS_HDR_SIZE 0x00004000 #define CONFIG_BS_ADDR_RAM 0xa0600000 diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 83773d0af5..1842d14e87 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -226,15 +226,14 @@ int board_init(void) #endif select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); rtc_enable_32khz_output(); +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif -#ifdef CONFIG_FSL_CAAM - sec_init(); -#endif - return 0; } diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 07ba0266d5..666562d106 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -218,6 +218,10 @@ int board_init(void) #ifdef CONFIG_FSL_QIXIS QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); #endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif From 73fbcdf16376bf06b6d94c7cb53f911b6924dab5 Mon Sep 17 00:00:00 2001 From: Udit Agarwal Date: Wed, 16 Aug 2017 07:13:30 -0400 Subject: [PATCH 05/33] armv8: LS2080ARDB: Add secure boot defconfig for QSPI boot. Signed-off-by: Udit Agarwal [YS: dropped redundant commit message] Reviewed-by: York Sun --- board/freescale/ls2080ardb/MAINTAINERS | 5 ++ configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 48 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 configs/ls2088ardb_qspi_SECURE_BOOT_defconfig diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS index 91f13ea717..8da1c6d0ae 100644 --- a/board/freescale/ls2080ardb/MAINTAINERS +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -21,3 +21,8 @@ LS2080A_SECURE_BOOT BOARD M: Saksham Jain S: Maintained F: configs/ls2080ardb_SECURE_BOOT_defconfig + +LS2088A_QSPI_SECURE_BOOT BOARD +M: Udit Agarwal +S: Maintained +F: configs/ls2088ardb_qspi_SECURE_BOOT_defconfig diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig new file mode 100644 index 0000000000..05c799dfaf --- /dev/null +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2080ARDB=y +CONFIG_FSL_LS_PPA=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_QSPI_BOOT=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_BOOTDELAY=10 +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GREPENV=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_PHYLIB=y +CONFIG_NETDEVICES=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_FSL_QSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SECURE_BOOT=y +CONFIG_RSA=y +CONFIG_RSA_SOFTWARE_EXP=y From 05e35d26dbd18bbe896d361be7929749812059c8 Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 15 Aug 2017 11:14:41 -0700 Subject: [PATCH 06/33] tools: pblimage: Fix address calculation The image size should be added to the initial pbl command, not bit "ORed". Signed-off-by: York Sun --- tools/pblimage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/pblimage.c b/tools/pblimage.c index ffc3268209..d25a733d41 100644 --- a/tools/pblimage.c +++ b/tools/pblimage.c @@ -293,7 +293,7 @@ int pblimage_check_params(struct image_tool_params *params) pbi_crc_cmd2 = 0; pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK; pbl_cmd_initaddr |= PBL_ACS_CONT_CMD; - pbl_cmd_initaddr |= uboot_size; + pbl_cmd_initaddr += uboot_size; pbl_end_cmd[0] = 0x09610000; pbl_end_cmd[1] = 0x00000000; pbl_end_cmd[2] = 0x096100c0; From d1f2ee7021dc4a89f43e25f289747a27da0e930f Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 15 Aug 2017 11:14:42 -0700 Subject: [PATCH 07/33] cmd: spl: Fix compiling warning Fix warning "cast from pointer to integer of different size". Signed-off-by: York Sun Reviewed-by: Tom Rini --- cmd/spl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/cmd/spl.c b/cmd/spl.c index ad033652d4..4d84492346 100644 --- a/cmd/spl.c +++ b/cmd/spl.c @@ -109,12 +109,12 @@ static int spl_export(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) c = find_cmd_tbl(argv[1], &cmd_spl_export_sub[0], ARRAY_SIZE(cmd_spl_export_sub)); - if ((c) && ((int)c->cmd <= SPL_EXPORT_LAST)) { + if ((c) && ((long)c->cmd <= SPL_EXPORT_LAST)) { argc -= 2; argv += 2; - if (call_bootm(argc, argv, subcmd_list[(int)c->cmd])) + if (call_bootm(argc, argv, subcmd_list[(long)c->cmd])) return -1; - switch ((int)c->cmd) { + switch ((long)c->cmd) { #ifdef CONFIG_OF_LIBFDT case SPL_EXPORT_FDT: printf("Argument image is now in RAM: 0x%p\n", @@ -153,7 +153,7 @@ static int do_spl(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) c = find_cmd_tbl(argv[1], &cmd_spl_sub[0], ARRAY_SIZE(cmd_spl_sub)); if (c) { - cmd = (int)c->cmd; + cmd = (long)c->cmd; switch (cmd) { case SPL_EXPORT: argc--; From 7264f2928b46c5f5685e39ed607652c8991e47b6 Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 15 Aug 2017 11:14:43 -0700 Subject: [PATCH 08/33] spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun Reviewed-by: Tom Rini Reviewed-by: Simon Glass --- common/spl/spl_fit.c | 32 ++++++++++++++++++++++++++++++-- lib/Kconfig | 12 ++++++++++++ lib/Makefile | 5 +++-- 3 files changed, 45 insertions(+), 4 deletions(-) diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index d2a352ecbe..fe41ce02d2 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -11,6 +11,10 @@ #include #include +#ifndef CONFIG_SYS_BOOTM_LEN +#define CONFIG_SYS_BOOTM_LEN (64 << 20) +#endif + /** * spl_fit_get_image_node(): By using the matching configuration subnode, * retrieve the name of an image, specified by a property name and an index @@ -135,6 +139,19 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector, ulong overhead; int nr_sectors; int align_len = ARCH_DMA_MINALIGN - 1; + uint8_t image_comp = -1, type = -1; + + if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP)) { + if (fit_image_get_comp(fit, node, &image_comp)) + puts("Cannot get image compression format.\n"); + else + debug("%s ", genimg_get_comp_name(image_comp)); + + if (fit_image_get_type(fit, node, &type)) + puts("Cannot get image type.\n"); + else + debug("%s ", genimg_get_type_name(type)); + } offset = fdt_getprop_u32(fit, node, "data-offset"); if (offset == FDT_ERROR) @@ -154,7 +171,7 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector, if (info->read(info, sector + get_aligned_image_offset(info, offset), nr_sectors, (void*)load_ptr) != nr_sectors) return -EIO; - debug("image: dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset, + debug("image dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset, (unsigned long)length); src = (void *)load_ptr + overhead; @@ -162,7 +179,18 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector, board_fit_image_post_process(&src, &length); #endif - memcpy((void*)load_addr, src, length); + if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && + IS_ENABLED(CONFIG_SPL_GZIP) && + image_comp == IH_COMP_GZIP && + type == IH_TYPE_KERNEL) { + if (gunzip((void *)load_addr, CONFIG_SYS_BOOTM_LEN, + src, &length)) { + puts("Uncompressing error\n"); + return -EIO; + } + } else { + memcpy((void *)load_addr, src, length); + } if (image_info) { image_info->load_addr = load_addr; diff --git a/lib/Kconfig b/lib/Kconfig index fe337acaeb..628ef8ddb6 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -176,6 +176,18 @@ config LZO bool "Enable LZO decompression support" help This enables support for LZO compression algorithm.r + +config SPL_GZIP + bool "Enable gzip decompression support for SPL build" + select SPL_ZLIB + help + This enables support for GZIP compression altorithm for SPL boot. + +config SPL_ZLIB + bool + help + This enables compression lib for SPL boot. + endmenu config ERRNO_STR diff --git a/lib/Makefile b/lib/Makefile index 2eef1eb80e..da6a11aca3 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_EFI_LOADER) += efi_loader/ obj-$(CONFIG_LZMA) += lzma/ obj-$(CONFIG_LZO) += lzo/ -obj-$(CONFIG_ZLIB) += zlib/ obj-$(CONFIG_BZIP2) += bzip2/ obj-$(CONFIG_TIZEN) += tizen/ obj-$(CONFIG_FIT) += libfdt/ @@ -26,7 +25,6 @@ obj-y += crc16.o obj-$(CONFIG_ERRNO_STR) += errno_str.o obj-$(CONFIG_FIT) += fdtdec_common.o obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o -obj-$(CONFIG_GZIP) += gunzip.o obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o obj-y += initcall.o @@ -49,6 +47,9 @@ obj-$(CONFIG_RSA) += rsa/ obj-$(CONFIG_SHA1) += sha1.o obj-$(CONFIG_SHA256) += sha256.o +obj-$(CONFIG_$(SPL_)ZLIB) += zlib/ +obj-$(CONFIG_$(SPL_)GZIP) += gunzip.o + obj-$(CONFIG_$(SPL_TPL_)SAVEENV) += qsort.o obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ ifneq ($(CONFIG_$(SPL_TPL_)BUILD)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy) From 5fd13d973613d308663f97b51059ecd9179baf09 Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 15 Aug 2017 11:14:44 -0700 Subject: [PATCH 09/33] spl: fit: Support both external and embedded data SPL supports U-Boot image in FIT format which has data outside of FIT structure. This adds support for embedded data for normal FIT images. Signed-off-by: York Sun Reviewed-by: Tom Rini Reviewed-by: Simon Glass --- common/spl/spl_fit.c | 52 +++++++++++++++++---------- doc/uImage.FIT/source_file_format.txt | 4 +++ 2 files changed, 37 insertions(+), 19 deletions(-) diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index fe41ce02d2..9449a225ff 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -132,14 +132,16 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector, void *fit, ulong base_offset, int node, struct spl_image_info *image_info) { - ulong offset; + int offset; size_t length; + int len; ulong load_addr, load_ptr; void *src; ulong overhead; int nr_sectors; int align_len = ARCH_DMA_MINALIGN - 1; uint8_t image_comp = -1, type = -1; + const void *data; if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP)) { if (fit_image_get_comp(fit, node, &image_comp)) @@ -153,28 +155,40 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector, debug("%s ", genimg_get_type_name(type)); } - offset = fdt_getprop_u32(fit, node, "data-offset"); - if (offset == FDT_ERROR) - return -ENOENT; - offset += base_offset; - length = fdt_getprop_u32(fit, node, "data-size"); - if (length == FDT_ERROR) - return -ENOENT; - load_addr = fdt_getprop_u32(fit, node, "load"); - if (load_addr == FDT_ERROR && image_info) + if (fit_image_get_load(fit, node, &load_addr)) load_addr = image_info->load_addr; - load_ptr = (load_addr + align_len) & ~align_len; - overhead = get_aligned_image_overhead(info, offset); - nr_sectors = get_aligned_image_size(info, length, offset); + if (!fit_image_get_data_offset(fit, node, &offset)) { + /* External data */ + offset += base_offset; + if (fit_image_get_data_size(fit, node, &len)) + return -ENOENT; - if (info->read(info, sector + get_aligned_image_offset(info, offset), - nr_sectors, (void*)load_ptr) != nr_sectors) - return -EIO; - debug("image dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset, - (unsigned long)length); + load_ptr = (load_addr + align_len) & ~align_len; + length = len; + + overhead = get_aligned_image_overhead(info, offset); + nr_sectors = get_aligned_image_size(info, length, offset); + + if (info->read(info, + sector + get_aligned_image_offset(info, offset), + nr_sectors, (void *)load_ptr) != nr_sectors) + return -EIO; + + debug("External data: dst=%lx, offset=%x, size=%lx\n", + load_ptr, offset, (unsigned long)length); + src = (void *)load_ptr + overhead; + } else { + /* Embedded data */ + if (fit_image_get_data(fit, node, &data, &length)) { + puts("Cannot get image data/size\n"); + return -ENOENT; + } + debug("Embedded data: dst=%lx, size=%lx\n", load_addr, + (unsigned long)length); + src = (void *)data; + } - src = (void *)load_ptr + overhead; #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS board_fit_image_post_process(&src, &length); #endif diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index 136d3d7078..32825eda8d 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -288,6 +288,10 @@ The 'data-offset' property can be substituted with 'data-position', which defines an absolute position or address as the offset. This is helpful when booting U-Boot proper before performing relocation. +Normal kernel FIT image has data embedded within FIT structure. U-Boot image +for SPL boot has external data. Existence of 'data-offset' can be used to +identify which format is used. + 9) Examples ----------- From c8bc3c0c9ff7ce649b2af1416919b50ecf504874 Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 15 Aug 2017 11:14:45 -0700 Subject: [PATCH 10/33] spl: fit: Add booting OS first If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found in FIT structure. Signed-off-by: York Sun Reviewed-by: Tom Rini Reviewed-by: Simon Glass --- common/spl/spl_fit.c | 60 ++++++++++++++++++++++++------------ doc/uImage.FIT/multi_spl.its | 7 +++++ 2 files changed, 48 insertions(+), 19 deletions(-) diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 9449a225ff..49ccf1c17b 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -222,13 +222,16 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, ulong size; unsigned long count; struct spl_image_info image_info; - int node, images, ret; + bool boot_os = false; + int node = -1; + int images, ret; int base_offset, align_len = ARCH_DMA_MINALIGN - 1; int index = 0; /* - * Figure out where the external images start. This is the base for the - * data-offset properties in each image. + * For FIT with external data, figure out where the external images + * start. This is the base for the data-offset properties in each + * image. */ size = fdt_totalsize(fit); size = (size + 3) & ~3; @@ -247,6 +250,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, * * In fact the FIT has its own load address, but we assume it cannot * be before CONFIG_SYS_TEXT_BASE. + * + * For FIT with data embedded, data is loaded as part of FIT image. + * For FIT with external data, data is not loaded in this step. */ fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len - align_len) & ~align_len); @@ -264,8 +270,17 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, return -1; } +#ifdef CONFIG_SPL_OS_BOOT + /* Find OS image first */ + node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0); + if (node < 0) + debug("No kernel image.\n"); + else + boot_os = true; +#endif /* find the U-Boot image */ - node = spl_fit_get_image_node(fit, images, "firmware", 0); + if (node < 0) + node = spl_fit_get_image_node(fit, images, "firmware", 0); if (node < 0) { debug("could not find firmware image, trying loadables...\n"); node = spl_fit_get_image_node(fit, images, "loadables", 0); @@ -287,25 +302,32 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, if (ret) return ret; +#ifdef CONFIG_SPL_OS_BOOT + if (!fit_image_get_os(fit, node, &spl_image->os)) + debug("Image OS is %s\n", genimg_get_os_name(spl_image->os)); +#else spl_image->os = IH_OS_U_BOOT; +#endif - /* Figure out which device tree the board wants to use */ - node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0); - if (node < 0) { - debug("%s: cannot find FDT node\n", __func__); - return node; + if (!boot_os) { + /* Figure out which device tree the board wants to use */ + node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0); + if (node < 0) { + debug("%s: cannot find FDT node\n", __func__); + return node; + } + + /* + * Read the device tree and place it after the image. + * Align the destination address to ARCH_DMA_MINALIGN. + */ + image_info.load_addr = spl_image->load_addr + spl_image->size; + ret = spl_load_fit_image(info, sector, fit, base_offset, node, + &image_info); + if (ret < 0) + return ret; } - /* - * Read the device tree and place it after the image. - * Align the destination address to ARCH_DMA_MINALIGN. - */ - image_info.load_addr = spl_image->load_addr + spl_image->size; - ret = spl_load_fit_image(info, sector, fit, base_offset, node, - &image_info); - if (ret < 0) - return ret; - /* Now check if there are more images for us to load */ for (; ; index++) { node = spl_fit_get_image_node(fit, images, "loadables", index); diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its index e5551d42b7..d43563d87a 100644 --- a/doc/uImage.FIT/multi_spl.its +++ b/doc/uImage.FIT/multi_spl.its @@ -4,6 +4,13 @@ * (Bogus) example FIT image description file demonstrating the usage * of multiple images loaded by the SPL. * Several binaries will be loaded at their respective load addresses. + * + * For booting U-Boot, "firmware" is searched first. If not found, "loadables" + * is used to identify images to be loaded into memory. If falcon boot is + * enabled, "kernel" is searched first. If not found, it falls back to the + * same flow as booting U-Boot. Changing image type will result skipping + * specific image. + * * Finally the one image specifying an entry point will be entered by the SPL. */ From c055cee1951a01a3306f54f20bcfb85adf28721a Mon Sep 17 00:00:00 2001 From: Ashish Kumar Date: Fri, 18 Aug 2017 10:54:36 +0530 Subject: [PATCH 11/33] armv8: fsl-lsch3: Make CCN-504 related code conditional LS2080 family has CCN-504 cache coherent interconnet. Other SoCs in LSCH3 family may have differnt interconnect. Signed-off-by: Ashish Kumar Signed-off-by: Prabhakar Kushwaha [YS: revised commit message] Reviewed-by: York Sun --- README | 4 ++++ arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 ++++ arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 8 +++++--- 3 files changed, 13 insertions(+), 3 deletions(-) diff --git a/README b/README index c0c8b559f9..ca07f7a3f9 100644 --- a/README +++ b/README @@ -322,6 +322,10 @@ build a config tool - later. Defined For SoC that has cache coherent interconnect CCN-400 + CONFIG_SYS_FSL_HAS_CCN504 + + Defined for SoC that has cache coherent interconnect CCN-504 + The following options need to be configured: - CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index cdadd38a12..d72f8f84d4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -61,6 +61,7 @@ config ARCH_LS2080A select SYS_FSL_DDR select SYS_FSL_DDR_LE select SYS_FSL_DDR_VER_50 + select SYS_FSL_HAS_CCN504 select SYS_FSL_HAS_DP_DDR select SYS_FSL_HAS_SEC select SYS_FSL_HAS_DDR4 @@ -269,6 +270,9 @@ config SYS_FSL_IFC_BANK_COUNT config SYS_FSL_HAS_CCI400 bool +config SYS_FSL_HAS_CCN504 + bool + config SYS_FSL_HAS_DP_DDR bool diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 3136e3f3a2..5ff01a0e1b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -76,7 +76,7 @@ ENTRY(lowlevel_init) switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */ 1: -#ifdef CONFIG_FSL_LSCH3 +#if defined (CONFIG_SYS_FSL_HAS_CCN504) /* Set Wuo bit for RN-I 20 */ #ifdef CONFIG_ARCH_LS2080A @@ -171,7 +171,7 @@ ENTRY(lowlevel_init) ldr x0, =CCI_S2_QOS_CONTROL_BASE(20) ldr x1, =0x00FF000C bl ccn504_set_qos -#endif +#endif /* CONFIG_SYS_FSL_HAS_CCN504 */ #ifdef SMMU_BASE /* Set the SMMU page size in the sACR register */ @@ -338,7 +338,9 @@ get_svr: ldr x1, =FSL_LSCH3_SVR ldr w0, [x1] ret +#endif +#ifdef CONFIG_SYS_FSL_HAS_CCN504 hnf_pstate_poll: /* x0 has the desired status, return 0 for success, 1 for timeout * clobber x1, x2, x3, x4, x6, x7 @@ -420,7 +422,7 @@ ENTRY(__asm_flush_l3_dcache) mov lr, x29 ret ENDPROC(__asm_flush_l3_dcache) -#endif +#endif /* CONFIG_SYS_FSL_HAS_CCN504 */ #ifdef CONFIG_MP /* Keep literals not used by the secondary boot code outside it */ From 033c538e567aca5f0876f2504b5e278c2a0f83a8 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Thu, 24 Aug 2017 16:42:43 +0530 Subject: [PATCH 12/33] drivers:net:fsl-mc: Update MC address calculation Update MC address calculation as per MC design requirement of address as least significant 512MB address of MC private allocated memory, i.e. address should point to end address masked with 512MB offset in private DRAM block. Signed-off-by: Priyanka Jain Signed-off-by: Ashish Kumar [YS: reformatted commit message] Reviewed-by: York Sun --- drivers/net/fsl-mc/mc.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index bdb6792c72..12dbcd8cc5 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -800,12 +800,19 @@ int get_dpl_apply_status(void) return mc_dpl_applied; } -/** +/* * Return the MC address of private DRAM block. + * As per MC design document, MC initial base address + * should be least significant 512MB address of MC private + * memory, i.e. address should point to end address masked + * with 512MB offset in private DRAM block. */ u64 mc_get_dram_addr(void) { - return gd->arch.resv_ram; + size_t mc_ram_size = mc_get_dram_block_size(); + + return (gd->arch.resv_ram + mc_ram_size - 1) & + MC_RAM_BASE_ADDR_ALIGNMENT_MASK; } /** From 5436c6a347918bf278d4cc9e5678f9bd94bdbcbc Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 28 Aug 2017 10:40:33 +0800 Subject: [PATCH 13/33] armv8: fsl: Use correct conditional compile for ls1012a According current code base, CONFIG_LS1012A should be CONFIG_ARCH_LS1012A, or function fsl_fdt_disable(blob) will be wrongly called to disable all dwc3 USB nodes on LS1012A, which cause Linux USB function stop working at all. Signed-off-by: Ran Wang Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index c9252751db..cae59da803 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -418,7 +418,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_firmware(blob); #endif -#ifndef CONFIG_LS1012A +#ifndef CONFIG_ARCH_LS1012A fsl_fdt_disable_usb(blob); #endif #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN From 22c51855bf79b4ef767f35067472d337858423b3 Mon Sep 17 00:00:00 2001 From: Suresh Gupta Date: Tue, 29 Aug 2017 19:12:43 +0530 Subject: [PATCH 14/33] armv8: fsl-layerscape: Fix final MMU table for QSPI and IFC For QSPI and IFC addresses execution shouldn't be allowed when u-boot running from DDR. Revise the MMU final table to enforce execute-never bits. Signed-off-by: Suresh Gupta Reviewed-by: York Sun --- arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index c4e5eccd77..3d564d6610 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -199,7 +199,8 @@ static struct mm_region final_map[] = { }, { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_SIZE1, - PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE + PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_SIZE2, @@ -208,7 +209,8 @@ static struct mm_region final_map[] = { }, { CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_SIZE2, - PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE + PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_SIZE, From 6d9b82d085ea810c7bb2ed5203522e45cc72c336 Mon Sep 17 00:00:00 2001 From: Ashish Kumar Date: Thu, 31 Aug 2017 16:12:53 +0530 Subject: [PATCH 15/33] armv8: ls1088a: Add NXP LS1088A SoC support LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang Signed-off-by: Prabhakar Kushwaha Signed-off-by: Ashish Kumar Signed-off-by: Raghav Dogra Signed-off-by: Shaohui Xie [YS: Revised commit message] Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 35 ++++- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 + .../cpu/armv8/fsl-layerscape/doc/README.soc | 43 +++++- .../armv8/fsl-layerscape/fsl_lsch3_serdes.c | 19 +++ .../cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 126 ++++++++++++++++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 1 + arch/arm/dts/fsl-ls1088a.dtsi | 78 +++++++++++ .../include/asm/arch-fsl-layerscape/config.h | 62 ++++++++- .../arm/include/asm/arch-fsl-layerscape/cpu.h | 4 + .../asm/arch-fsl-layerscape/fsl_serdes.h | 3 +- .../asm/arch-fsl-layerscape/immap_lsch3.h | 11 ++ .../arm/include/asm/arch-fsl-layerscape/soc.h | 4 + .../asm/arch-fsl-layerscape/stream_id_lsch3.h | 14 ++ drivers/ddr/fsl/util.c | 2 +- drivers/net/ldpaa_eth/Makefile | 1 + drivers/net/ldpaa_eth/ls1088a.c | 87 ++++++++++++ 16 files changed, 482 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c create mode 100644 arch/arm/dts/fsl-ls1088a.dtsi create mode 100644 drivers/net/ldpaa_eth/ls1088a.c diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index d72f8f84d4..527051fb73 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -50,6 +50,29 @@ config ARCH_LS1046A select BOARD_EARLY_INIT_F imply SCSI +config ARCH_LS1088A + bool + select ARMV8_SET_SMPEN + select FSL_LSCH3 + select SYS_FSL_DDR + select SYS_FSL_DDR_LE + select SYS_FSL_DDR_VER_50 + select SYS_FSL_ERRATUM_A009803 + select SYS_FSL_ERRATUM_A009942 + select SYS_FSL_ERRATUM_A010165 + select SYS_FSL_ERRATUM_A008511 + select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_HAS_CCI400 + select SYS_FSL_HAS_DDR4 + select SYS_FSL_HAS_SEC + select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_LE + select SYS_FSL_SRDS_1 + select SYS_FSL_SRDS_2 + select FSL_TZASC_1 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F + config ARCH_LS2080A bool select ARMV8_SET_SMPEN @@ -100,7 +123,7 @@ config FSL_LSCH3 config FSL_MC_ENET bool "Management Complex network" - depends on ARCH_LS2080A + depends on ARCH_LS2080A || ARCH_LS1088A default y select RESV_RAM help @@ -116,6 +139,7 @@ config FSL_PCIE_COMPAT default "fsl,ls1043a-pcie" if ARCH_LS1043A default "fsl,ls1046a-pcie" if ARCH_LS1046A default "fsl,ls2080a-pcie" if ARCH_LS2080A + default "fsl,ls1088a-pcie" if ARCH_LS1088A help This compatible is used to find pci controller node in Kernel DT to complete fixup. @@ -231,6 +255,7 @@ config MAX_CPUS default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A default 16 if ARCH_LS2080A + default 8 if ARCH_LS1088A default 1 help Set this number to the maximum number of possible CPUs in the SoC. @@ -262,10 +287,10 @@ config SYS_CCI400_OFFSET config SYS_FSL_IFC_BANK_COUNT int "Maximum banks of Integrated flash controller" - depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A + depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A - default 8 if ARCH_LS2080A + default 8 if ARCH_LS2080A || ARCH_LS1088A config SYS_FSL_HAS_CCI400 bool @@ -314,6 +339,7 @@ config SYS_FSL_PCLK_DIV int "Platform clock divider" default 1 if ARCH_LS1043A default 1 if ARCH_LS1046A + default 1 if ARCH_LS1088A default 2 help This is the divider that is used to derive Platform clock from @@ -407,7 +433,8 @@ config SYS_FSL_ERRATUM_A009929 config SYS_MC_RSV_MEM_ALIGN hex "Management Complex reserved memory alignment" depends on RESV_RAM - default 0x20000000 + default 0x20000000 if ARCH_LS2080A + default 0x70000000 if ARCH_LS1088A help Reserved memory needs to be aligned for MC to use. Default value is 512MB. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index e3ce0184d8..115c3fc1d1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -38,3 +38,7 @@ endif ifneq ($(CONFIG_ARCH_LS1046A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o endif + +ifneq ($(CONFIG_ARCH_LS1088A),) +obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o +endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index 3ae16ae7ad..276ab9052d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -1,11 +1,12 @@ SoC overview 1. LS1043A - 2. LS2080A - 3. LS1012A - 4. LS1046A - 5. LS2088A - 6. LS2081A + 2. LS1088A + 3. LS2080A + 4. LS1012A + 5. LS1046A + 6. LS2088A + 7. LS2081A LS1043A --------- @@ -45,6 +46,38 @@ The LS1043A SoC includes the following function and features: - Integrated flash controller supporting NAND and NOR flash - QorIQ platform's trust architecture 2.1 +LS1088A +-------- +The QorIQ LS1088A processor is built on the Layerscape +architecture combining eight ARM A53 processor cores +with advanced, high-performance datapath acceleration +and networks, peripheral interfaces required for +networking, wireless infrastructure, and general-purpose +embedded applications. + +LS1088A is compliant with the Layerscape Chassis Generation 3. + +Features summary: + - 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs + - Cores are in 2 cluster of 4-cores each + - 1MB L2 - Cache per cluster + - Cache coherent interconnect (CCI-400) + - 1 64-bit DDR4 SDRAM memory controller with ECC + - Data path acceleration architecture 2.0 (DPAA2) + - 4-Lane 10GHz SerDes comprising of WRIOP + - 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART) + - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs + - QSPI, SPI, IFC2.0 supporting NAND, NOR flash + - 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc + - 2 DUARTs + - 4 I2C, GPIO + - Thermal monitor unit(TMU) + - 4 Flextimers and 1 generic timer + - Support for hardware virtualization and partitioning enforcement + - QorIQ platform's trust architecture 3.0 + - Service processor (SP) provides pre-boot initialization and secure-boot + capabilities + LS2080A -------- The LS2080A integrated multicore processor combines eight ARM Cortex-A57 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index ef97556367..179cac6e49 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -28,6 +28,20 @@ __weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl) return; } +/* + *The return value of this func is the serdes protocol used. + *Typically this function is called number of times depending + *upon the number of serdes blocks in the Silicon. + *Zero is used to denote that no serdes was enabled, + *this is the case when golden RCW was used where DPAA2 bring was + *intentionally removed to achieve boot to prompt +*/ + +__weak int serdes_get_number(int serdes, int cfg) +{ + return cfg; +} + int is_serdes_configured(enum srds_prtcl device) { int ret = 0; @@ -73,6 +87,9 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) printf("invalid SerDes%d\n", sd); break; } + + cfg = serdes_get_number(sd, cfg); + /* Is serdes enabled at all? */ if (cfg == 0) return -ENODEV; @@ -99,6 +116,8 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask; cfg >>= sd_prctl_shift; + + cfg = serdes_get_number(sd, cfg); printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); if (!is_serdes_prtcl_valid(sd, cfg)) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c new file mode 100644 index 0000000000..9f5cdd5710 --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c @@ -0,0 +1,126 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +struct serdes_config { + u8 ip_protocol; + u8 lanes[SRDS_MAX_LANES]; + u8 rcw_lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x12, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 3 } }, + {0x15, {SGMII3, SGMII7, XFI1, XFI2 }, {3, 3, 1, 1 } }, + {0x16, {SGMII3, SGMII7, SGMII1, XFI2 }, {3, 3, 3, 1 } }, + {0x17, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 2 } }, + {0x18, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 2, 2 } }, + {0x19, {SGMII3, QSGMII_B, XFI1, XFI2}, {3, 4, 1, 1 } }, + {0x1A, {SGMII3, QSGMII_B, SGMII1, XFI2 }, {3, 4, 3, 1 } }, + {0x1B, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 2 } }, + {0x1C, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 2, 2 } }, + {0x1D, {QSGMII_A, QSGMII_B, XFI1, XFI2 }, {4, 4, 1, 1 } }, + {0x1E, {QSGMII_A, QSGMII_B, SGMII1, XFI2 }, {4, 4, 3, 1 } }, + {0x1F, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 2 } }, + {0x20, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 2, 2 } }, + {0x35, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 3 } }, + {0x36, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 3 } }, + {0x3A, {SGMII3, PCIE1, SGMII1, SGMII2 }, {3, 5, 3, 3 } }, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x0C, {PCIE1, PCIE1, PCIE1, PCIE1 }, {8, 8, 8, 8 } }, + {0x0D, {PCIE1, PCIE2, PCIE3, SATA1 }, {5, 5, 5, 9 } }, + {0x0E, {PCIE1, PCIE1, PCIE2, SATA1 }, {7, 7, 6, 9 } }, + {0x13, {PCIE1, PCIE1, PCIE3, PCIE3 }, {7, 7, 7, 7 } }, + {0x14, {PCIE1, PCIE2, PCIE3, PCIE3 }, {5, 5, 7, 7 } }, + {0x3C, {NONE, PCIE2, NONE, PCIE3 }, {0, 5, 0, 6 } }, + {} +}; + +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, +}; + +int serdes_get_number(int serdes, int cfg) +{ + struct serdes_config *ptr; + int i, j, index, lnk; + int is_found, max_lane = SRDS_MAX_LANES; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + + while (ptr->ip_protocol) { + is_found = 1; + for (i = 0, j = max_lane - 1; i < max_lane; i++, j--) { + lnk = cfg & (0xf << 4 * i); + lnk = lnk >> (4 * i); + + index = (serdes == FSL_SRDS_1) ? j : i; + + if (ptr->rcw_lanes[index] == lnk && is_found) + is_found = 1; + else + is_found = 0; + } + + if (is_found) + return ptr->ip_protocol; + ptr++; + } + + return 0; +} + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->ip_protocol) { + if (ptr->ip_protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->ip_protocol) { + if (ptr->ip_protocol == prtcl) + break; + ptr++; + } + + if (!ptr->ip_protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 339ff0c4c7..a3b9f6baa4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -24,6 +24,7 @@ #ifdef CONFIG_CHAIN_OF_TRUST #include #endif +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi new file mode 100644 index 0000000000..421d2de799 --- /dev/null +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -0,0 +1,78 @@ +/* + * NXP ls1088a SOC common device tree source + * + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + compatible = "fsl,ls1088a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; + + dspi: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + num-cs = <6>; + }; + + qspi: quadspi@1550000 { + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + num-cs = <4>; + }; +}; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 79e94f9f2c..a7098be846 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -116,6 +116,67 @@ #define CONFIG_SYS_FSL_ERRATUM_A008751 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 + +#elif defined(CONFIG_ARCH_LS1088A) +#define CONFIG_SYS_FSL_NUM_CC_PLLS 3 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } +#define CONFIG_GICV3 +#define CONFIG_FSL_TZPC_BP147 +#define CONFIG_FSL_TZASC_400 +#define CONFIG_SYS_PAGE_SIZE 0x10000 + +#define SRDS_MAX_LANES 4 + +/* TZ Protection Controller Definitions */ +#define TZPC_BASE 0x02200000 +#define TZPCR0SIZE_BASE (TZPC_BASE) +#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800) +#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804) +#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808) +#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C) +#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810) +#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814) +#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818) +#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C) +#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820) + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0x06000000 +#define GICR_BASE 0x06100000 + +/* SMMU Defintions */ +#define SMMU_BASE 0x05000000 /* GR0 Base */ + +/* DDR */ +#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE + +#define CONFIG_SYS_FSL_CCSR_GUR_LE +#define CONFIG_SYS_FSL_CCSR_SCFG_LE +#define CONFIG_SYS_FSL_ESDHC_LE +#define CONFIG_SYS_FSL_IFC_LE +#define CONFIG_SYS_FSL_PEX_LUT_LE + +#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN + +/* SFP */ +#define CONFIG_SYS_FSL_SFP_VER_3_4 +#define CONFIG_SYS_FSL_SFP_LE +#define CONFIG_SYS_FSL_SRK_LE + +/* Security Monitor */ +#define CONFIG_SYS_FSL_SEC_MON_LE + +/* Secure Boot */ +#define CONFIG_ESBC_HDR_LS + +/* DCFG - GUR */ +#define CONFIG_SYS_FSL_CCSR_GUR_LE +#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 +#define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ +#define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ +#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00020000 /* Real size 128K */ + #elif defined(CONFIG_FSL_LSCH2) #define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */ #define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ @@ -218,7 +279,6 @@ #define GICC_BASE 0x01420000 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 - #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 3d564d6610..a0dac86bab 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -24,6 +24,10 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(LS1026A, LS1026A, 2), CPU_TYPE_ENTRY(LS2040A, LS2040A, 4), CPU_TYPE_ENTRY(LS1012A, LS1012A, 1), + CPU_TYPE_ENTRY(LS1088A, LS1088A, 8), + CPU_TYPE_ENTRY(LS1084A, LS1084A, 8), + CPU_TYPE_ENTRY(LS1048A, LS1048A, 4), + CPU_TYPE_ENTRY(LS1044A, LS1044A, 4), }; #ifndef CONFIG_SYS_DCACHE_OFF diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index a8f9a50501..a2c7578311 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -9,7 +9,7 @@ #include -#ifdef CONFIG_ARCH_LS2080A +#ifdef CONFIG_FSL_LSCH3 enum srds_prtcl { /* * Nobody will check whether the device 'NONE' has been configured, @@ -158,6 +158,7 @@ void fsl_serdes_init(void); int serdes_get_first_lane(u32 sd, enum srds_prtcl device); enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_get_number(int serdes, int cfg); #ifdef CONFIG_FSL_LSCH2 const char *serdes_clock_to_string(u32 clock); diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 59410aa7e7..99a7413611 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -246,6 +246,17 @@ struct ccsr_gur { #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT #define FSL_CHASSIS3_SRDS1_REGSR 29 #define FSL_CHASSIS3_SRDS2_REGSR 29 +#elif defined(CONFIG_ARCH_LS1088A) +#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK 0xFFFF0000 +#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT 16 +#define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK 0x0000FFFF +#define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT 0 +#define FSL_CHASSIS3_SRDS1_PRTCL_MASK FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK +#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT +#define FSL_CHASSIS3_SRDS2_PRTCL_MASK FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK +#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT +#define FSL_CHASSIS3_SRDS1_REGSR 29 +#define FSL_CHASSIS3_SRDS2_REGSR 30 #endif #define RCW_SB_EN_REG_INDEX 9 #define RCW_SB_EN_MASK 0x00000400 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index aeb12739aa..ea8acedaa1 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -57,6 +57,10 @@ struct cpu_type { #define SVR_LS1023A 0x879208 #define SVR_LS1046A 0x870700 #define SVR_LS1026A 0x870708 +#define SVR_LS1048A 0x870320 +#define SVR_LS1084A 0x870302 +#define SVR_LS1088A 0x870300 +#define SVR_LS1044A 0x870322 #define SVR_LS2045A 0x870120 #define SVR_LS2080A 0x870110 #define SVR_LS2085A 0x870100 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index d7d527d8f4..d1891c4bd6 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -66,12 +66,26 @@ #define FSL_USB2_STREAM_ID 2 #define FSL_SDMMC_STREAM_ID 3 #define FSL_SATA1_STREAM_ID 4 + +#if defined(CONFIG_ARCH_LS2080A) #define FSL_SATA2_STREAM_ID 5 +#endif + +#if defined(CONFIG_ARCH_LS2080A) #define FSL_DMA_STREAM_ID 6 +#elif defined(CONFIG_ARCH_LS1088A) +#define FSL_DMA_STREAM_ID 5 +#endif /* PCI - programmed in PEXn_LUT */ #define FSL_PEX_STREAM_ID_START 7 + +#if defined(CONFIG_ARCH_LS2080A) #define FSL_PEX_STREAM_ID_END 22 +#elif defined(CONFIG_ARCH_LS1088A) +#define FSL_PEX_STREAM_ID_END 18 +#endif + /* DPAA2 - set in MC DPC and alloced by MC */ #define FSL_DPAA2_STREAM_ID_START 23 diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 0a305b36b8..d6e6e78de3 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -390,7 +390,7 @@ void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, void remove_unused_controllers(fsl_ddr_info_t *info) { -#ifdef CONFIG_FSL_LSCH3 +#ifdef CONFIG_SYS_FSL_HAS_CCN504 int i; u64 nodeid; void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL); diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile index 08675ec641..13ecd381ea 100644 --- a/drivers/net/ldpaa_eth/Makefile +++ b/drivers/net/ldpaa_eth/Makefile @@ -7,3 +7,4 @@ obj-y += ldpaa_wriop.o obj-y += ldpaa_eth.o obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o +obj-$(CONFIG_ARCH_LS1088A) += ls1088a.o diff --git a/drivers/net/ldpaa_eth/ls1088a.c b/drivers/net/ldpaa_eth/ls1088a.c new file mode 100644 index 0000000000..703945cec3 --- /dev/null +++ b/drivers/net/ldpaa_eth/ls1088a.c @@ -0,0 +1,87 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include + +u32 dpmac_to_devdisr[] = { + [WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1, + [WRIOP1_DPMAC2] = FSL_CHASSIS3_DEVDISR2_DPMAC2, + [WRIOP1_DPMAC3] = FSL_CHASSIS3_DEVDISR2_DPMAC3, + [WRIOP1_DPMAC4] = FSL_CHASSIS3_DEVDISR2_DPMAC4, + [WRIOP1_DPMAC5] = FSL_CHASSIS3_DEVDISR2_DPMAC5, + [WRIOP1_DPMAC6] = FSL_CHASSIS3_DEVDISR2_DPMAC6, + [WRIOP1_DPMAC7] = FSL_CHASSIS3_DEVDISR2_DPMAC7, + [WRIOP1_DPMAC8] = FSL_CHASSIS3_DEVDISR2_DPMAC8, + [WRIOP1_DPMAC9] = FSL_CHASSIS3_DEVDISR2_DPMAC9, + [WRIOP1_DPMAC10] = FSL_CHASSIS3_DEVDISR2_DPMAC10, +}; + +static int is_device_disabled(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 devdisr2 = in_le32(&gur->devdisr2); + + return dpmac_to_devdisr[dpmac_id] & devdisr2; +} + +void wriop_dpmac_disable(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + setbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]); +} + +void wriop_dpmac_enable(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + clrbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]); +} + +phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtcl) +{ + enum srds_prtcl; + + if (is_device_disabled(dpmac_id + 1)) + return PHY_INTERFACE_MODE_NONE; + + switch (lane_prtcl) { + case SGMII1: + case SGMII2: + case SGMII3: + case SGMII7: + return PHY_INTERFACE_MODE_SGMII; + } + + if (lane_prtcl >= XFI1 && lane_prtcl <= XFI2) + return PHY_INTERFACE_MODE_XGMII; + + if (lane_prtcl >= QSGMII_A && lane_prtcl <= QSGMII_B) + return PHY_INTERFACE_MODE_QSGMII; + + return PHY_INTERFACE_MODE_NONE; +} + +void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl) +{ + switch (lane_prtcl) { + case QSGMII_A: + wriop_init_dpmac(sd, 3, (int)lane_prtcl); + wriop_init_dpmac(sd, 4, (int)lane_prtcl); + wriop_init_dpmac(sd, 5, (int)lane_prtcl); + wriop_init_dpmac(sd, 6, (int)lane_prtcl); + break; + case QSGMII_B: + wriop_init_dpmac(sd, 7, (int)lane_prtcl); + wriop_init_dpmac(sd, 8, (int)lane_prtcl); + wriop_init_dpmac(sd, 9, (int)lane_prtcl); + wriop_init_dpmac(sd, 10, (int)lane_prtcl); + break; + } +} From e84a324ba7950e88c0df4a2c656f533c723aeaae Mon Sep 17 00:00:00 2001 From: Ashish Kumar Date: Thu, 31 Aug 2017 16:12:54 +0530 Subject: [PATCH 16/33] armv8: ls1088ardb: Add support for LS1088ARDB platform LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang Signed-off-by: Prabhakar Kushwaha Signed-off-by: Ashish Kumar Signed-off-by: Raghav Dogra Signed-off-by: Shaohui Xie [YS: Disabled NAND in board header file] Reviewed-by: York Sun WIP: disable NAND for LS1088ARDB --- arch/arm/Kconfig | 14 + arch/arm/cpu/armv8/Kconfig | 1 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 + arch/arm/dts/Makefile | 3 +- arch/arm/dts/fsl-ls1088a-rdb.dts | 40 +++ board/freescale/ls1088a/Kconfig | 15 + board/freescale/ls1088a/MAINTAINERS | 7 + board/freescale/ls1088a/Makefile | 9 + board/freescale/ls1088a/README | 66 +++++ board/freescale/ls1088a/ddr.c | 102 +++++++ board/freescale/ls1088a/ddr.h | 44 +++ board/freescale/ls1088a/eth_ls1088ardb.c | 102 +++++++ board/freescale/ls1088a/ls1088a.c | 332 ++++++++++++++++++++++ board/freescale/ls1088a/ls1088a_qixis.h | 34 +++ configs/ls1088ardb_qspi_defconfig | 29 ++ include/configs/ls1088a_common.h | 201 +++++++++++++ include/configs/ls1088ardb.h | 317 +++++++++++++++++++++ 17 files changed, 1316 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/fsl-ls1088a-rdb.dts create mode 100644 board/freescale/ls1088a/Kconfig create mode 100644 board/freescale/ls1088a/MAINTAINERS create mode 100644 board/freescale/ls1088a/Makefile create mode 100644 board/freescale/ls1088a/README create mode 100644 board/freescale/ls1088a/ddr.c create mode 100644 board/freescale/ls1088a/ddr.h create mode 100644 board/freescale/ls1088a/eth_ls1088ardb.c create mode 100644 board/freescale/ls1088a/ls1088a.c create mode 100644 board/freescale/ls1088a/ls1088a_qixis.h create mode 100644 configs/ls1088ardb_qspi_defconfig create mode 100644 include/configs/ls1088a_common.h create mode 100644 include/configs/ls1088ardb.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 53eae8953e..41bf86475d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -909,6 +909,19 @@ config TARGET_LS1012AFRDM development platform that supports the QorIQ LS1012A Layerscape Architecture processor. +config TARGET_LS1088ARDB + bool "Support ls1088ardb" + select ARCH_LS1088A + select ARM64 + select ARMV8_MULTIENTRY + select ARCH_MISC_INIT + select BOARD_LATE_INIT + help + Support for NXP LS1088ARDB platform. + The LS1088A Reference design board (RDB) is a high-performance + development platform that supports the QorIQ LS1088A + Layerscape Architecture processor. + config TARGET_LS1021AQDS bool "Support ls1021aqds" select BOARD_LATE_INIT @@ -1192,6 +1205,7 @@ source "board/creative/xfi3/Kconfig" source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" +source "board/freescale/ls1088a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 8e4c3dd8f2..aecdf814c8 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -88,6 +88,7 @@ config PSCI_RESET depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && !TARGET_LS2080A_EMU && \ !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \ !TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \ + !TARGET_LS1088ARDB && \ !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 527051fb73..ca8cdd8f37 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -208,6 +208,7 @@ config SYS_LS_PPA_FW_ADDR default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A default 0x60400000 if SYS_LS_PPA_FW_IN_XIP default 0x400000 if SYS_LS_PPA_FW_IN_MMC default 0x400000 if SYS_LS_PPA_FW_IN_NAND diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 762429c463..9c63fb4c34 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -187,7 +187,8 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2080a-rdb.dtb \ fsl-ls2081a-rdb.dtb \ - fsl-ls2088a-rdb-qspi.dtb + fsl-ls2088a-rdb-qspi.dtb \ + fsl-ls1088a-rdb.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1043a-qds-lpuart.dtb \ fsl-ls1043a-rdb.dtb \ diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts new file mode 100644 index 0000000000..30ceed8212 --- /dev/null +++ b/arch/arm/dts/fsl-ls1088a-rdb.dts @@ -0,0 +1,40 @@ +/* + * NXP ls1088a RDB board device tree source + * + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "NXP Layerscape 1088a RDB Board"; + compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; + aliases { + spi0 = &qspi; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fs512s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + + qflash1: s25fs512s@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; +}; diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig new file mode 100644 index 0000000000..a4d8223471 --- /dev/null +++ b/board/freescale/ls1088a/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1088ARDB + +config SYS_BOARD + default "ls1088a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1088ardb" + +endif diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS new file mode 100644 index 0000000000..12834f63be --- /dev/null +++ b/board/freescale/ls1088a/MAINTAINERS @@ -0,0 +1,7 @@ +LS1088ARDB BOARD +M: Prabhakar Kushwaha +M: Ashish Kumar +S: Maintained +F: board/freescale/ls1088a/ +F: include/configs/ls1088ardb.h +F: configs/ls1088ardb_qspi_defconfig diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile new file mode 100644 index 0000000000..e997cf1adb --- /dev/null +++ b/board/freescale/ls1088a/Makefile @@ -0,0 +1,9 @@ +# +# Copyright 2017 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1088a.o +obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o +obj-y += ddr.o diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README new file mode 100644 index 0000000000..3f4d987631 --- /dev/null +++ b/board/freescale/ls1088a/README @@ -0,0 +1,66 @@ +Overview +-------- +The LS1088A Reference Design (RDB) is a high-performance computing, +evaluation, and development platform that supports ARM SoC LS1088A and its +derivatives. + + +LS1088A SoC Overview +-------------------------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc + +RDB Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- + +For QSPI Boot +SW1 0011 0001 +SW2 x100 0000 +SW3 1111 0010 +SW4 1001 0011 +SW5 1111 0000 + +For SD Boot +SW1 0010 0000 +SW2 0100 0000 +SW3 1111 0010 +SW4 1001 0011 +SW5 1111 0000 + +For eMMC Boot +SW1 0010 0000 +SW2 1100 0000 +SW3 1111 0010 +SW4 1001 0011 +SW5 1111 0000 + +Alternately you can use this command to switch from QSPI to SD + +=> i2c mw 66 0x60 0x20; i2c mw 66 10 10;i2c mw 66 10 21 + + LS1088ARDB board Overview + ------------------------- + - SERDES Connections, 16 lanes supporting: + - PCI Express - 3.0 + - SATA 3.0 + - XFI + - QSGMII + - DDR Controller + - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four + chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default + with FSL refernce software is 2100MT/s + - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB + - IFC/Local Bus + - One 2 GB NAND flash with ECC support, not as boot source + - CPLD of size 2K + - USB 3.0 + - Two high speed USB 3.0 ports + - First USB 3.0 port configured as Host with Type-A connector + - Second USB 3.0 port configured as OTG with micro-AB connector + - SDHC/eMMC + - SDHC slot and onboard eMMC are muxed together + - 4 I2C controllers + - Two SATA onboard connectors + - 2 UART + - JTAG support + - QSPI emulator support + - TDM riser support diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c new file mode 100644 index 0000000000..0ecfd653b4 --- /dev/null +++ b/board/freescale/ls1088a/ddr.c @@ -0,0 +1,102 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 1) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + pbsp = udimms[0]; + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + + + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* Enable DDR hashing */ + popts->addr_hash = 1; + + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | + DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; +} + + +int fsl_initdram(void) +{ + puts("Initializing DDR....using SPD\n"); + + gd->ram_size = fsl_ddr_sdram(); + + return 0; +} diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h new file mode 100644 index 0000000000..dfcfc1fae2 --- /dev/null +++ b/board/freescale/ls1088a/ddr.h @@ -0,0 +1,44 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1088A_DDR_H__ +#define __LS1088A_DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ +#if defined(CONFIG_TARGET_LS1088ARDB) + + {2, 1666, 0, 8, 8, 0x090A0B0E, 0x0F10110D,}, + {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2300, 0, 8, 9, 0x0A0C0E11, 0x1214160F,}, + {} + +#endif +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; +#endif diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c new file mode 100644 index 0000000000..853d815da5 --- /dev/null +++ b/board/freescale/ls1088a/eth_ls1088ardb.c @@ -0,0 +1,102 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define MC_BOOT_ENV_VAR "mcinitcmd" +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FSL_MC_ENET) + char *mc_boot_env_var; + int i, interface; + struct memac_mdio_info mdio_info; + struct mii_dev *dev; + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + struct memac_mdio_controller *reg; + u32 srds_s1, cfg; + + cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & + FSL_CHASSIS3_SRDS1_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; + + srds_s1 = serdes_get_number(FSL_SRDS_1, cfg); + + reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1; + mdio_info.regs = reg; + mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; + + /* Register the EMI 1 */ + fm_memac_mdio_init(bis, &mdio_info); + + reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2; + mdio_info.regs = reg; + mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; + + /* Register the EMI 2 */ + fm_memac_mdio_init(bis, &mdio_info); + + switch (srds_s1) { + case 0x1D: + /* + * XFI does not need a PHY to work, but to avoid U-boot use + * default PHY address which is zero to a MAC when it found + * a MAC has no PHY address, we give a PHY address to XFI + * MAC error. + */ + wriop_set_phy_address(WRIOP1_DPMAC1, 0x0a); + wriop_set_phy_address(WRIOP1_DPMAC2, AQ_PHY_ADDR1); + wriop_set_phy_address(WRIOP1_DPMAC3, QSGMII1_PORT1_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC4, QSGMII1_PORT2_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC5, QSGMII1_PORT3_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC6, QSGMII1_PORT4_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC7, QSGMII2_PORT1_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC8, QSGMII2_PORT2_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC9, QSGMII2_PORT3_PHY_ADDR); + wriop_set_phy_address(WRIOP1_DPMAC10, QSGMII2_PORT4_PHY_ADDR); + + break; + default: + printf("SerDes1 protocol 0x%x is not supported on LS1088ARDB\n", + srds_s1); + break; + } + + for (i = WRIOP1_DPMAC3; i <= WRIOP1_DPMAC10; i++) { + interface = wriop_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_QSGMII: + dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); + wriop_set_mdio(i, dev); + break; + default: + break; + } + } + + dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); + wriop_set_mdio(WRIOP1_DPMAC2, dev); + + mc_boot_env_var = env_get(MC_BOOT_ENV_VAR); + if (mc_boot_env_var) + run_command_list(mc_boot_env_var, -1, 0); + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c new file mode 100644 index 0000000000..a022da9827 --- /dev/null +++ b/board/freescale/ls1088a/ls1088a.c @@ -0,0 +1,332 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/qixis.h" +#include "ls1088a_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +unsigned long long get_qixis_addr(void) +{ + unsigned long long addr; + + if (gd->flags & GD_FLG_RELOC) + addr = QIXIS_BASE_PHYS; + else + addr = QIXIS_BASE_PHYS_EARLY; + + /* + * IFC address under 256MB is mapped to 0x30000000, any address above + * is mapped to 0x5_10000000 up to 4GB. + */ + addr = addr > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000; + + return addr; +} + +int checkboard(void) +{ + char buf[64]; + u8 sw; + static const char *const freq[] = {"100", "125", "156.25", + "100 separate SSCG"}; + int clock; + + + printf("Board: LS1088A-RDB, "); + + sw = QIXIS_READ(arch); + printf("Board Arch: V%d, ", sw >> 4); + + printf("Board version: %c, boot from ", (sw & 0xf) + 'A'); + + + memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + +#ifdef CONFIG_SD_BOOT + puts("SD card\n"); +#endif + switch (sw) { + case 0: + + puts("QSPI:"); + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT; + if (sw == 0 || sw == 4) + puts("0\n"); + else if (sw == 1) + puts("1\n"); + else + puts("EMU\n"); + break; + + default: + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + break; + } + + + printf("CPLD: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata)); + + + /* + * Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES1 Reference : "); + sw = QIXIS_READ(brdcfg[2]); + clock = (sw >> 6) & 3; + printf("Clock1 = %sMHz ", freq[clock]); + clock = (sw >> 4) & 3; + printf("Clock2 = %sMHz", freq[clock]); + + puts("\nSERDES2 Reference : "); + clock = (sw >> 2) & 3; + printf("Clock1 = %sMHz ", freq[clock]); + clock = (sw >> 0) & 3; + printf("Clock2 = %sMHz\n", freq[clock]); + + return 0; +} + +bool if_board_diff_clk(void) +{ + u8 diff_conf = QIXIS_READ(dutcfg[11]); + return diff_conf & 0x80; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); + + switch (sysclk_conf & 0x0f) { + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); + + if (if_board_diff_clk()) + return get_board_sys_clk(); + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + + return 66666666; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +void board_retimer_init(void) +{ + u8 reg; + + /* Retimer is connected to I2C1_CH5 */ + select_i2c_ch_pca9547(I2C_MUX_CH5); + + /* Access to Control/Shared register */ + reg = 0x0; + i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1); + + /* Read device revision and ID */ + i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1); + debug("Retimer version id = 0x%x\n", reg); + + /* Enable Broadcast. All writes target all channel register sets */ + reg = 0x0c; + i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1); + + /* Reset Channel Registers */ + i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1); + reg |= 0x4; + i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1); + + /* Set data rate as 10.3125 Gbps */ + reg = 0x90; + i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1); + reg = 0xb3; + i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1); + reg = 0x90; + i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1); + reg = 0xb3; + i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1); + reg = 0xcd; + i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1); + + /* Select VCO Divider to full rate (000) */ + i2c_read(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1); + reg &= 0x0f; + reg |= 0x70; + i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1); + + + /*return the default channel*/ + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); +} + +int board_init(void) +{ + init_final_memctl_regs(); +#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET) + u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; +#endif + + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + board_retimer_init(); + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + +#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET) + /* invert AQR105 IRQ pins polarity */ + out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR105_IRQ_MASK); +#endif + +#ifdef CONFIG_FSL_LS_PPA + ppa_init(); +#endif + return 0; +} + +int board_early_init_f(void) +{ + fsl_lsch3_early_init_f(); + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); + print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); + print_ddr_info(0); +} + +#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{ +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + return 0; +} +#endif + +#ifdef CONFIG_FSL_MC_ENET +void fdt_fixup_board_enet(void *fdt) +{ + int offset; + + offset = fdt_path_offset(fdt, "/fsl-mc"); + + if (offset < 0) + offset = fdt_path_offset(fdt, "/fsl,dprc@0"); + + if (offset < 0) { + printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n", + __func__, offset); + return; + } + + if (get_mc_boot_status() == 0) + fdt_status_okay(fdt, offset); + else + fdt_status_fail(fdt, offset); +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + int err, i; + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + ft_cpu_setup(blob, bd); + + /* fixup DT for the two GPP DDR banks */ + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + base[i] = gd->bd->bi_dram[i].start; + size[i] = gd->bd->bi_dram[i].size; + } + +#ifdef CONFIG_RESV_RAM + /* reduce size if reserved memory is within this bank */ + if (gd->arch.resv_ram >= base[0] && + gd->arch.resv_ram < base[0] + size[0]) + size[0] = gd->arch.resv_ram - base[0]; + else if (gd->arch.resv_ram >= base[1] && + gd->arch.resv_ram < base[1] + size[1]) + size[1] = gd->arch.resv_ram - base[1]; +#endif + + fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS); + +#ifdef CONFIG_FSL_MC_ENET + fdt_fixup_board_enet(blob); + err = fsl_mc_ldpaa_exit(bd); + if (err) + return err; +#endif + + return 0; +} +#endif diff --git a/board/freescale/ls1088a/ls1088a_qixis.h b/board/freescale/ls1088a/ls1088a_qixis.h new file mode 100644 index 0000000000..9757d1b28c --- /dev/null +++ b/board/freescale/ls1088a/ls1088a_qixis.h @@ -0,0 +1,34 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1088AQDS_QIXIS_H__ +#define __LS1088AQDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for LS1088AQDS */ + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +/* BRDCFG2 - SD clock*/ +#define QIXIS_SDCLK1_100 0x0 +#define QIXIS_SDCLK1_125 0x1 +#define QIXIS_SDCLK1_165 0x2 +#define QIXIS_SDCLK1_100_SP 0x3 + +#endif diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig new file mode 100644 index 0000000000..33e41247e6 --- /dev/null +++ b/configs/ls1088ardb_qspi_defconfig @@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088ARDB=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_DSPI=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_FSL_LS_PPA=y diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h new file mode 100644 index 0000000000..c78ba5d6b6 --- /dev/null +++ b/include/configs/ls1088a_common.h @@ -0,0 +1,201 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1088_COMMON_H +#define __LS1088_COMMON_H + + +#define CONFIG_REMAKE_ELF +#define CONFIG_FSL_LAYERSCAPE +#define CONFIG_MP + +#include +#include +#include + +/* Link Definitions */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) + +/* Link Definitions */ +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x20100000 +#else +#define CONFIG_SYS_TEXT_BASE 0x30100000 +#endif + +#define CONFIG_SUPPORT_RAW_INITRD + + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ + +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 +/* + * SMP Definitinos + */ +#define CPU_RELEASE_ADDR secondary_boot_func + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* IFC */ +#define CONFIG_FSL_IFC + +/* + * During booting, IFC is mapped at the region of 0x30000000. + * But this region is limited to 256MB. To accommodate NOR, promjet + * and FPGA. This region is divided as below: + * 0x30000000 - 0x37ffffff : 128MB : NOR flash + * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet + * 0x3C000000 - 0x40000000 : 64MB : FPGA etc + * + * To accommodate bigger NOR flash and other devices, we will map IFC + * chip selects to as below: + * 0x5_1000_0000..0x5_1fff_ffff Memory Hole + * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB) + * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB + * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) + * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) + * + * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. + * CONFIG_SYS_FLASH_BASE has the final address (core view) + * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting + */ + +#define CONFIG_SYS_FLASH_BASE 0x580000000ULL +#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 +#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 + +#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 +#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 + +#ifndef __ASSEMBLY__ +unsigned long long get_qixis_addr(void); +#endif + +#define QIXIS_BASE get_qixis_addr() +#define QIXIS_BASE_PHYS 0x20000000 +#define QIXIS_BASE_PHYS_EARLY 0xC000000 + + +#define CONFIG_SYS_NAND_BASE 0x530000000ULL +#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 + + +/* MC firmware */ +/* TODO Actual DPL max length needs to be confirmed with the MC FW team */ +#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 +#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 +/* + * Carve out a DDR region which will not be used by u-boot/Linux + * + * It will be used by MC and Debug Server. The MC region must be + * 512MB aligned, so the min size to hide is 512MB. + */ + +#if defined(CONFIG_FSL_MC_ENET) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) +#endif + +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + +/* Command line configuration */ +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_CACHE + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) + +/* Physical Memory Map */ +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +/* #define CONFIG_DISPLAY_CPUINFO */ + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x581000000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "console=ttyAMA0,38400n8\0" \ + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" + +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0500 " \ + "ramdisk_size=0x3000000 default_hugepagesz=2m" \ + " hugepagesz=2m hugepages=256" +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ + "sf read 0x80200000 0xd00000 0x100000;"\ + " fsl_mc apply dpl 0x80200000 &&" \ + " sf read $kernel_load $kernel_start" \ + " $kernel_size && bootm $kernel_load" +#else /* NOR BOOT*/ +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ + " cp.b $kernel_start $kernel_load" \ + " $kernel_size && bootm $kernel_load" +#endif + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#endif /* __LS1088_COMMON_H */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h new file mode 100644 index 0000000000..3223278dfd --- /dev/null +++ b/include/configs/ls1088ardb.h @@ -0,0 +1,317 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1088A_RDB_H +#define __LS1088A_RDB_H + +#include "ls1088a_common.h" + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ +#define CONFIG_ENV_SECT_SIZE 0x40000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#endif + +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_QIXIS_I2C_ACCESS +#define SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#endif + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */ +#define COUNTER_FREQUENCY 25000000 /* 25MHz */ + +#define CONFIG_DDR_SPD +#ifdef CONFIG_EMU +#define CONFIG_SYS_FSL_DDR_EMU +#define CONFIG_SYS_MXC_I2C1_SPEED 40000000 +#define CONFIG_SYS_MXC_I2C2_SPEED 40000000 +#else +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif +#define SPD_EEPROM_ADDRESS 0x51 +#define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + + +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) +#define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64 * 1024 * 1024) + +#define CONFIG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(6) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x1) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x1)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \ + FTIM2_NOR_TCH(0x0) | \ + FTIM2_NOR_TWP(0x1)) +#define CONFIG_SYS_NOR_FTIM3 0x04000000 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#ifndef SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#endif +#endif +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#define CONFIG_FSL_QIXIS +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 2 +#define QIXIS_QMAP_MASK 0xe0 +#define QIXIS_QMAP_SHIFT 5 +#define QIXIS_LBMAP_MASK 0x1f +#define QIXIS_LBMAP_SHIFT 5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x20 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_SD_QSPI 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_SD 0x40 +#define QIXIS_RCW_SRC_QSPI 0x62 +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define SYS_FPGA_CSPR_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) + +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) +/* QIXIS Timing parameters*/ +#define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define SYS_FPGA_CS_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define SYS_FPGA_CS_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ + FTIM2_GPCM_TCH(0xf) | \ + FTIM2_GPCM_TWP(0x3E)) +#define SYS_FPGA_CS_FTIM3 0x0 + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL +#define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY +#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#endif + + +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 + +/* + * I2C bus multiplexer + */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ +#define I2C_RETIMER_ADDR 0x18 +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH5 0xD +/* +* RTC configuration +*/ +#define RTC +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CONFIG_CMD_DATE + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* QSPI device */ +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 26) +#define FSL_QSPI_FLASH_NUM 2 +#endif + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_FSL_MEMAC + +/* Initial environment variables */ +#if defined(CONFIG_QSPI_BOOT) +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x90100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x1000000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ + "sf read 0x80100000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcmemsize=0x70000000 \0" + +#endif + +/* MAC/PHY configuration */ +#ifdef CONFIG_FSL_MC_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB + +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_AQUANTIA +#define AQ_PHY_ADDR1 0x00 +#define AQR105_IRQ_MASK 0x00000004 + +#define QSGMII1_PORT1_PHY_ADDR 0x0c +#define QSGMII1_PORT2_PHY_ADDR 0x0d +#define QSGMII1_PORT3_PHY_ADDR 0x0e +#define QSGMII1_PORT4_PHY_ADDR 0x0f +#define QSGMII2_PORT1_PHY_ADDR 0x1c +#define QSGMII2_PORT2_PHY_ADDR 0x1d +#define QSGMII2_PORT3_PHY_ADDR 0x1e +#define QSGMII2_PORT4_PHY_ADDR 0x1f + +#define CONFIG_MII +#define CONFIG_ETHPRIME "DPMAC1@xgmii" +#define CONFIG_PHY_GIGE +#endif + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +#undef CONFIG_CMDLINE_EDITING +#include + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) +#include + +#include + +#endif /* __LS1088A_RDB_H */ From 7769776a603f76ab1b7c1478f6cf8388b3cb5464 Mon Sep 17 00:00:00 2001 From: Ashish Kumar Date: Thu, 31 Aug 2017 16:12:55 +0530 Subject: [PATCH 17/33] armv8: ls1088aqds: Add support of LS1088AQDS This patch add support of LS1088AQDS platform. The LS1088A QorIQTM Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the LS1088A QorIQ Architecture processor. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Shaohui Xie Signed-off-by: Ashish Kumar Reviewed-by: York Sun --- arch/arm/Kconfig | 13 + arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/dts/Makefile | 3 +- arch/arm/dts/fsl-ls1088a-qds.dts | 70 +++ board/freescale/ls1088a/Kconfig | 16 + board/freescale/ls1088a/MAINTAINERS | 8 + board/freescale/ls1088a/Makefile | 1 + board/freescale/ls1088a/README | 79 +++ board/freescale/ls1088a/ddr.h | 5 + board/freescale/ls1088a/eth_ls1088aqds.c | 650 +++++++++++++++++++++++ board/freescale/ls1088a/ls1088a.c | 84 ++- board/freescale/ls1088a/ls1088a_qixis.h | 5 + configs/ls1088aqds_qspi_defconfig | 29 + include/configs/ls1088aqds.h | 414 +++++++++++++++ 14 files changed, 1372 insertions(+), 7 deletions(-) create mode 100644 arch/arm/dts/fsl-ls1088a-qds.dts create mode 100644 board/freescale/ls1088a/eth_ls1088aqds.c create mode 100644 configs/ls1088aqds_qspi_defconfig create mode 100644 include/configs/ls1088aqds.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 41bf86475d..bb64b9c160 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -808,6 +808,19 @@ config TARGET_LS2080A_SIMU development platform that supports the QorIQ LS2080A Layerscape Architecture processor. +config TARGET_LS1088AQDS + bool "Support ls1088aqds" + select ARCH_LS1088A + select ARM64 + select ARMV8_MULTIENTRY + select ARCH_MISC_INIT + select BOARD_LATE_INIT + help + Support for NXP LS1088AQDS platform + The LS1088A Development System (QDS) is a high-performance + development platform that supports the QorIQ LS1088A + Layerscape Architecture processor. + config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARCH_LS2080A diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index aecdf814c8..12aba9d4e9 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -88,7 +88,7 @@ config PSCI_RESET depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && !TARGET_LS2080A_EMU && \ !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \ !TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \ - !TARGET_LS1088ARDB && \ + !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \ !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9c63fb4c34..b070f98135 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -188,7 +188,8 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2080a-rdb.dtb \ fsl-ls2081a-rdb.dtb \ fsl-ls2088a-rdb-qspi.dtb \ - fsl-ls1088a-rdb.dtb + fsl-ls1088a-rdb.dtb \ + fsl-ls1088a-qds.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1043a-qds-lpuart.dtb \ fsl-ls1043a-rdb.dtb \ diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts new file mode 100644 index 0000000000..9b7bef42b8 --- /dev/null +++ b/arch/arm/dts/fsl-ls1088a-qds.dts @@ -0,0 +1,70 @@ +/* + * NXP ls1088a QDS board device tree source + * + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "NXP Layerscape 1088a QDS Board"; + compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; + aliases { + spi0 = &qspi; + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + reg = <0>; + spi-max-frequency = <1000000>; /* input clock */ + }; + + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3500000>; + reg = <1>; + }; + + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3500000>; + reg = <2>; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fs512s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + + qflash1: s25fs512s@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; +}; diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig index a4d8223471..1ada661743 100644 --- a/board/freescale/ls1088a/Kconfig +++ b/board/freescale/ls1088a/Kconfig @@ -1,3 +1,19 @@ +if TARGET_LS1088AQDS + +config SYS_BOARD + default "ls1088a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1088aqds" + +endif + if TARGET_LS1088ARDB config SYS_BOARD diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS index 12834f63be..e1e6d4bbc5 100644 --- a/board/freescale/ls1088a/MAINTAINERS +++ b/board/freescale/ls1088a/MAINTAINERS @@ -5,3 +5,11 @@ S: Maintained F: board/freescale/ls1088a/ F: include/configs/ls1088ardb.h F: configs/ls1088ardb_qspi_defconfig + +LS1088AQDS BOARD +M: Prabhakar Kushwaha +M: Ashish Kumar +S: Maintained +F: board/freescale/ls1088a/ +F: include/configs/ls1088aqds.h +F: configs/ls1088aqds_qspi_defconfig diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile index e997cf1adb..bdcce9e6bc 100644 --- a/board/freescale/ls1088a/Makefile +++ b/board/freescale/ls1088a/Makefile @@ -6,4 +6,5 @@ obj-y += ls1088a.o obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o +obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o obj-y += ddr.o diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README index 3f4d987631..aa0fb6ac67 100644 --- a/board/freescale/ls1088a/README +++ b/board/freescale/ls1088a/README @@ -64,3 +64,82 @@ Alternately you can use this command to switch from QSPI to SD - JTAG support - QSPI emulator support - TDM riser support + +QDS Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- + +For 16b IFC-NOR +SW1 0001 0010 +SW2 x110 1111 + +For QSPI Boot +SW1 0011 0001 +SW2 0110 1111 + +For SD Boot +SW1 0010 0000 +SW2 0110 1111 + +For eMMC Boot +SW1 0010 0000 +SW2 1110 1111 + +For I2C (ext. addr.) +SW1 0010 0100 +SW2 1110 1111 + +SW3 to SW12 are identical for all boot source + +SW3 0010 0100 +SW4 0010 0000 +SW5 1110 0111 +SW6 1110 1000 +SW7 0001 1101 +SW8 0000 1101 +SW9 1100 1010 +SW10 1110 1000 +SW11 1111 0100 +SW12 1111 1111 + + LS1088AQDS board Overview + ------------------------- + - SERDES Connections, 16 lanes supporting: + - PCI Express - 3.0 + - SATA 3.0 + - 2 XFI + - QSGMII, SGMII with help for Riser card + - 2 RGMII + - 5 slot for Riser card or PCIe NIC + - DDR Controller + - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four + chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default + with FSL refernce software is 2100MT/s + - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB + - IFC/Local Bus + - One 2 GB NAND flash with ECC support, not as boot source + - CPLD of size 2K + - USB 3.0 + - Two high speed USB 3.0 ports + - First USB 3.0 port configured as Host with Type-A connector + - Second USB 3.0 port configured as OTG with micro-AB connector + - SDHC/eMMC + - SDHC/eMMC slot via adaptor + - 4 I2C controllers + - Two SATA onboard connectors + - 2 UART + - JTAG support + - DSPI + - PROMJET support + - QSPI emulator support + - TDM riser support + +QSPI flash memory map valid for both QDS and RDB + Image Flash Offset + RCW+PBI 0x00000000 + Boot firmware (U-Boot) 0x00100000 + Boot firmware Environment 0x00300000 + PPA firmware 0x00400000 + DPAA2 MC 0x00A00000 + DPAA2 DPL 0x00D00000 + DPAA2 DPC 0x00E00000 + Kernel.itb 0x01000000 diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h index dfcfc1fae2..a1ad709e86 100644 --- a/board/freescale/ls1088a/ddr.h +++ b/board/freescale/ls1088a/ddr.h @@ -34,6 +34,11 @@ static const struct board_specific_parameters udimm0[] = { {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, {2, 2300, 0, 8, 9, 0x0A0C0E11, 0x1214160F,}, {} +#elif defined(CONFIG_TARGET_LS1088AQDS) + {2, 1666, 0, 8, 8, 0x0A0A0C0E, 0x0F10110C,}, + {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2300, 0, 4, 9, 0x0A0C0D11, 0x1214150E,}, + {} #endif }; diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c new file mode 100644 index 0000000000..a912ff7330 --- /dev/null +++ b/board/freescale/ls1088a/eth_ls1088aqds.c @@ -0,0 +1,650 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/qixis.h" + +#include "ls1088a_qixis.h" + +#define MC_BOOT_ENV_VAR "mcinitcmd" + +#ifdef CONFIG_FSL_MC_ENET + +#define SFP_TX 0 + + /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks. + * Bank 1 -> Lanes A, B, C, D, + * Bank 2 -> Lanes A,B, C, D, + */ + + /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here + * means that the mapping must be determined dynamically, or that the lane + * maps to something other than a board slot. + */ + +static u8 lane_to_slot_fsm1[] = { + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs + * housed. + */ + +static int xqsgii_riser_phy_addr[] = { + XQSGMII_CARD_PHY1_PORT0_ADDR, + XQSGMII_CARD_PHY2_PORT0_ADDR, + XQSGMII_CARD_PHY3_PORT0_ADDR, + XQSGMII_CARD_PHY4_PORT0_ADDR, + XQSGMII_CARD_PHY3_PORT2_ADDR, + XQSGMII_CARD_PHY1_PORT2_ADDR, + XQSGMII_CARD_PHY4_PORT2_ADDR, + XQSGMII_CARD_PHY2_PORT2_ADDR, +}; + +static int sgmii_riser_phy_addr[] = { + SGMII_CARD_PORT1_PHY_ADDR, + SGMII_CARD_PORT2_PHY_ADDR, + SGMII_CARD_PORT3_PHY_ADDR, + SGMII_CARD_PORT4_PHY_ADDR, +}; + +/* Slot2 does not have EMI connections */ +#define EMI_NONE 0xFF +#define EMI1_RGMII1 0 +#define EMI1_RGMII2 1 +#define EMI1_SLOT1 2 + +static const char * const mdio_names[] = { + "LS1088A_QDS_MDIO0", + "LS1088A_QDS_MDIO1", + "LS1088A_QDS_MDIO2", + DEFAULT_WRIOP_MDIO2_NAME, +}; + +struct ls1088a_qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void sgmii_configure_repeater(int dpmac) +{ + struct mii_dev *bus; + uint8_t a = 0xf; + int i, j, ret; + unsigned short value; + const char *dev = "LS1088A_QDS_MDIO2"; + int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; + int i2c_phy_addr = 0; + int phy_addr = 0; + + uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; + uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84}; + uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; + uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; + + /* Set I2c to Slot 1 */ + i2c_write(0x77, 0, 0, &a, 1); + + switch (dpmac) { + case 1: + i2c_phy_addr = i2c_addr[1]; + phy_addr = 4; + break; + case 2: + i2c_phy_addr = i2c_addr[0]; + phy_addr = 0; + break; + case 3: + i2c_phy_addr = i2c_addr[3]; + phy_addr = 0xc; + break; + case 7: + i2c_phy_addr = i2c_addr[2]; + phy_addr = 8; + break; + } + + /* Check the PHY status */ + ret = miiphy_set_current_dev(dev); + if (ret > 0) + goto error; + + bus = mdio_get_current_dev(); + debug("Reading from bus %s\n", bus->name); + + ret = miiphy_write(dev, phy_addr, 0x1f, 3); + if (ret > 0) + goto error; + + mdelay(10); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + if (ret > 0) + goto error; + + mdelay(10); + + if ((value & 0xfff) == 0x401) { + miiphy_write(dev, phy_addr, 0x1f, 0); + printf("DPMAC %d:PHY is ..... Configured\n", dpmac); + return; + } + + for (i = 0; i < 4; i++) { + for (j = 0; j < 4; j++) { + a = 0x18; + i2c_write(i2c_phy_addr, 6, 1, &a, 1); + a = 0x38; + i2c_write(i2c_phy_addr, 4, 1, &a, 1); + a = 0x4; + i2c_write(i2c_phy_addr, 8, 1, &a, 1); + + i2c_write(i2c_phy_addr, 0xf, 1, + &ch_a_eq[i], 1); + i2c_write(i2c_phy_addr, 0x11, 1, + &ch_a_ctl2[j], 1); + + i2c_write(i2c_phy_addr, 0x16, 1, + &ch_b_eq[i], 1); + i2c_write(i2c_phy_addr, 0x18, 1, + &ch_b_ctl2[j], 1); + + a = 0x14; + i2c_write(i2c_phy_addr, 0x23, 1, &a, 1); + a = 0xb5; + i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1); + a = 0x20; + i2c_write(i2c_phy_addr, 4, 1, &a, 1); + mdelay(100); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + if (ret > 0) + goto error; + + mdelay(100); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + if (ret > 0) + goto error; + + if ((value & 0xfff) == 0x401) { + printf("DPMAC %d :PHY is configured ", + dpmac); + printf("after setting repeater 0x%x\n", + value); + i = 5; + j = 5; + } else { + printf("DPMAC %d :PHY is failed to ", + dpmac); + printf("configure the repeater 0x%x\n", value); + } + } + } + miiphy_write(dev, phy_addr, 0x1f, 0); +error: + if (ret) + printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac); + return; +} + +static void qsgmii_configure_repeater(int dpmac) +{ + uint8_t a = 0xf; + int i, j; + int i2c_phy_addr = 0; + int phy_addr = 0; + int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; + + uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; + uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84}; + uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; + uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; + + const char *dev = mdio_names[EMI1_SLOT1]; + int ret = 0; + unsigned short value; + + /* Set I2c to Slot 1 */ + i2c_write(0x77, 0, 0, &a, 1); + + switch (dpmac) { + case 7: + case 8: + case 9: + case 10: + i2c_phy_addr = i2c_addr[2]; + phy_addr = 8; + break; + + case 3: + case 4: + case 5: + case 6: + i2c_phy_addr = i2c_addr[3]; + phy_addr = 0xc; + break; + } + + /* Check the PHY status */ + ret = miiphy_set_current_dev(dev); + ret = miiphy_write(dev, phy_addr, 0x1f, 3); + mdelay(10); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + mdelay(10); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + mdelay(10); + if ((value & 0xf) == 0xf) { + miiphy_write(dev, phy_addr, 0x1f, 0); + printf("DPMAC %d :PHY is ..... Configured\n", dpmac); + return; + } + + for (i = 0; i < 4; i++) { + for (j = 0; j < 4; j++) { + a = 0x18; + i2c_write(i2c_phy_addr, 6, 1, &a, 1); + a = 0x38; + i2c_write(i2c_phy_addr, 4, 1, &a, 1); + a = 0x4; + i2c_write(i2c_phy_addr, 8, 1, &a, 1); + + i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1); + i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1); + + i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1); + i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1); + + a = 0x14; + i2c_write(i2c_phy_addr, 0x23, 1, &a, 1); + a = 0xb5; + i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1); + a = 0x20; + i2c_write(i2c_phy_addr, 4, 1, &a, 1); + mdelay(100); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + if (ret > 0) + goto error; + mdelay(1); + ret = miiphy_read(dev, phy_addr, 0x11, &value); + if (ret > 0) + goto error; + mdelay(10); + if ((value & 0xf) == 0xf) { + miiphy_write(dev, phy_addr, 0x1f, 0); + printf("DPMAC %d :PHY is ..... Configured\n", + dpmac); + return; + } + } + } +error: + printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac); + return; +} + +static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = ls1088a_qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +static void ls1088a_qds_enable_SFP_TX(u8 muxval) +{ + u8 brdcfg9; + + brdcfg9 = QIXIS_READ(brdcfg[9]); + brdcfg9 &= ~BRDCFG9_SFPTX_MASK; + brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT); + QIXIS_WRITE(brdcfg[9], brdcfg9); +} + +static void ls1088a_qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + + if (muxval <= 5) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr, + int devad, int regnum) +{ + struct ls1088a_qds_mdio *priv = bus->priv; + + ls1088a_qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct ls1088a_qds_mdio *priv = bus->priv; + + ls1088a_qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int ls1088a_qds_mdio_reset(struct mii_dev *bus) +{ + struct ls1088a_qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval) +{ + struct ls1088a_qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate ls1088a_qds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate ls1088a_qds private data\n"); + free(bus); + return -1; + } + + bus->read = ls1088a_qds_mdio_read; + bus->write = ls1088a_qds_mdio_write; + bus->reset = ls1088a_qds_mdio_reset; + sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +/* + * Initialize the dpmac_info array. + * + */ +static void initialize_dpmac_to_slot(void) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 serdes1_prtcl, cfg; + + cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & + FSL_CHASSIS3_SRDS1_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; + serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); + + switch (serdes1_prtcl) { + case 0x12: + printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", + serdes1_prtcl); + lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1; + break; + case 0x15: + case 0x1D: + printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", + serdes1_prtcl); + lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[2] = EMI_NONE; + lane_to_slot_fsm1[3] = EMI_NONE; + break; + case 0x1E: + printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", + serdes1_prtcl); + lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[3] = EMI_NONE; + break; + case 0x3A: + printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", + serdes1_prtcl); + lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[1] = EMI_NONE; + lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; + lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1; + break; + + default: + printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", + __func__, serdes1_prtcl); + break; + } +} + +void ls1088a_handle_phy_interface_sgmii(int dpmac_id) +{ + struct mii_dev *bus; + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 serdes1_prtcl, cfg; + + cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & + FSL_CHASSIS3_SRDS1_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; + serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); + + int *riser_phy_addr; + char *env_hwconfig = env_get("hwconfig"); + + if (hwconfig_f("xqsgmii", env_hwconfig)) + riser_phy_addr = &xqsgii_riser_phy_addr[0]; + else + riser_phy_addr = &sgmii_riser_phy_addr[0]; + + switch (serdes1_prtcl) { + case 0x12: + case 0x15: + case 0x1E: + case 0x3A: + switch (dpmac_id) { + case 1: + wriop_set_phy_address(dpmac_id, riser_phy_addr[1]); + break; + case 2: + wriop_set_phy_address(dpmac_id, riser_phy_addr[0]); + break; + case 3: + wriop_set_phy_address(dpmac_id, riser_phy_addr[3]); + break; + case 7: + wriop_set_phy_address(dpmac_id, riser_phy_addr[2]); + break; + default: + printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id); + break; + } + break; + default: + printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", + __func__, serdes1_prtcl); + return; + } + dpmac_info[dpmac_id].board_mux = EMI1_SLOT1; + bus = mii_dev_for_muxval(EMI1_SLOT1); + wriop_set_mdio(dpmac_id, bus); +} + +void ls1088a_handle_phy_interface_qsgmii(int dpmac_id) +{ + struct mii_dev *bus; + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 serdes1_prtcl, cfg; + + cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & + FSL_CHASSIS3_SRDS1_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; + serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); + + switch (serdes1_prtcl) { + case 0x1D: + case 0x1E: + switch (dpmac_id) { + case 3: + case 4: + case 5: + case 6: + wriop_set_phy_address(dpmac_id, dpmac_id + 9); + break; + case 7: + case 8: + case 9: + case 10: + wriop_set_phy_address(dpmac_id, dpmac_id + 1); + break; + } + + dpmac_info[dpmac_id].board_mux = EMI1_SLOT1; + bus = mii_dev_for_muxval(EMI1_SLOT1); + wriop_set_mdio(dpmac_id, bus); + break; + default: + printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} + +void ls1088a_handle_phy_interface_xsgmii(int i) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 serdes1_prtcl, cfg; + + cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & + FSL_CHASSIS3_SRDS1_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; + serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); + + switch (serdes1_prtcl) { + case 0x15: + case 0x1D: + case 0x1E: + wriop_set_phy_address(i, i + 26); + ls1088a_qds_enable_SFP_TX(SFP_TX); + break; + default: + printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} +#endif + +int board_eth_init(bd_t *bis) +{ + int error = 0, i; + char *mc_boot_env_var; +#ifdef CONFIG_FSL_MC_ENET + struct memac_mdio_info *memac_mdio0_info; + char *env_hwconfig = env_get("hwconfig"); + + initialize_dpmac_to_slot(); + + memac_mdio0_info = (struct memac_mdio_info *)malloc( + sizeof(struct memac_mdio_info)); + memac_mdio0_info->regs = + (struct memac_mdio_controller *) + CONFIG_SYS_FSL_WRIOP1_MDIO1; + memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME; + + /* Register the real MDIO1 bus */ + fm_memac_mdio_init(bis, memac_mdio0_info); + + /* Register the muxing front-ends to the MDIO buses */ + ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1); + ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2); + ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); + + for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { + switch (wriop_get_enet_if(i)) { + case PHY_INTERFACE_MODE_QSGMII: + ls1088a_handle_phy_interface_qsgmii(i); + break; + case PHY_INTERFACE_MODE_SGMII: + ls1088a_handle_phy_interface_sgmii(i); + break; + case PHY_INTERFACE_MODE_XGMII: + ls1088a_handle_phy_interface_xsgmii(i); + break; + default: + break; + + if (i == 16) + i = NUM_WRIOP_PORTS; + } + } + + mc_boot_env_var = env_get(MC_BOOT_ENV_VAR); + if (mc_boot_env_var) + run_command_list(mc_boot_env_var, -1, 0); + error = cpu_eth_init(bis); + + if (hwconfig_f("xqsgmii", env_hwconfig)) { + for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { + switch (wriop_get_enet_if(i)) { + case PHY_INTERFACE_MODE_QSGMII: + qsgmii_configure_repeater(i); + break; + case PHY_INTERFACE_MODE_SGMII: + sgmii_configure_repeater(i); + break; + default: + break; + } + + if (i == 16) + i = NUM_WRIOP_PORTS; + } + } +#endif + error = pci_eth_init(bis); + return error; +} diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index a022da9827..96d9ae7f1d 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -50,14 +50,20 @@ int checkboard(void) "100 separate SSCG"}; int clock; - +#ifdef CONFIG_TARGET_LS1088AQDS + printf("Board: LS1088A-QDS, "); +#else printf("Board: LS1088A-RDB, "); +#endif sw = QIXIS_READ(arch); printf("Board Arch: V%d, ", sw >> 4); +#ifdef CONFIG_TARGET_LS1088AQDS + printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); +#else printf("Board version: %c, boot from ", (sw & 0xf) + 'A'); - +#endif memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); @@ -68,8 +74,27 @@ int checkboard(void) puts("SD card\n"); #endif switch (sw) { +#ifdef CONFIG_TARGET_LS1088AQDS case 0: - + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + printf("vBank: %d\n", sw); + break; + case 8: + puts("PromJet\n"); + break; + case 15: + puts("IFCCard\n"); + break; + case 14: +#else + case 0: +#endif puts("QSPI:"); sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT; @@ -86,9 +111,15 @@ int checkboard(void) break; } - +#ifdef CONFIG_TARGET_LS1088AQDS + printf("FPGA: v%d (%s), build %d", + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); + /* the timestamp string contains "\n" at the end */ + printf(" on %s", qixis_read_time(buf)); +#else printf("CPLD: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata)); - +#endif /* * Display the actual SERDES reference clocks as configured by the @@ -116,8 +147,13 @@ int checkboard(void) bool if_board_diff_clk(void) { +#ifdef CONFIG_TARGET_LS1088AQDS + u8 diff_conf = QIXIS_READ(brdcfg[11]); + return diff_conf & 0x40; +#else u8 diff_conf = QIXIS_READ(dutcfg[11]); return diff_conf & 0x80; +#endif } unsigned long get_board_sys_clk(void) @@ -217,7 +253,45 @@ void board_retimer_init(void) reg |= 0x70; i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1); +#ifdef CONFIG_TARGET_LS1088AQDS + /* Retimer is connected to I2C1_CH5 */ + select_i2c_ch_pca9547(I2C_MUX_CH5); + /* Access to Control/Shared register */ + reg = 0x0; + i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, ®, 1); + + /* Read device revision and ID */ + i2c_read(I2C_RETIMER_ADDR2, 1, 1, ®, 1); + debug("Retimer version id = 0x%x\n", reg); + + /* Enable Broadcast. All writes target all channel register sets */ + reg = 0x0c; + i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, ®, 1); + + /* Reset Channel Registers */ + i2c_read(I2C_RETIMER_ADDR2, 0, 1, ®, 1); + reg |= 0x4; + i2c_write(I2C_RETIMER_ADDR2, 0, 1, ®, 1); + + /* Set data rate as 10.3125 Gbps */ + reg = 0x90; + i2c_write(I2C_RETIMER_ADDR2, 0x60, 1, ®, 1); + reg = 0xb3; + i2c_write(I2C_RETIMER_ADDR2, 0x61, 1, ®, 1); + reg = 0x90; + i2c_write(I2C_RETIMER_ADDR2, 0x62, 1, ®, 1); + reg = 0xb3; + i2c_write(I2C_RETIMER_ADDR2, 0x63, 1, ®, 1); + reg = 0xcd; + i2c_write(I2C_RETIMER_ADDR2, 0x64, 1, ®, 1); + + /* Select VCO Divider to full rate (000) */ + i2c_read(I2C_RETIMER_ADDR2, 0x2F, 1, ®, 1); + reg &= 0x0f; + reg |= 0x70; + i2c_write(I2C_RETIMER_ADDR2, 0x2F, 1, ®, 1); +#endif /*return the default channel*/ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); } diff --git a/board/freescale/ls1088a/ls1088a_qixis.h b/board/freescale/ls1088a/ls1088a_qixis.h index 9757d1b28c..4790461b47 100644 --- a/board/freescale/ls1088a/ls1088a_qixis.h +++ b/board/freescale/ls1088a/ls1088a_qixis.h @@ -31,4 +31,9 @@ #define QIXIS_SDCLK1_165 0x2 #define QIXIS_SDCLK1_100_SP 0x3 +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 +#define BRDCFG9_SFPTX_MASK 0x10 +#define BRDCFG9_SFPTX_SHIFT 4 + #endif diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig new file mode 100644 index 0000000000..6fff149fb6 --- /dev/null +++ b/configs/ls1088aqds_qspi_defconfig @@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088AQDS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_DSPI=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_FSL_LS_PPA=y diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h new file mode 100644 index 0000000000..3547b0bbbc --- /dev/null +++ b/include/configs/ls1088aqds.h @@ -0,0 +1,414 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1088A_QDS_H +#define __LS1088A_QDS_H + +#include "ls1088a_common.h" + + +#define CONFIG_DISPLAY_BOARDINFO_LATE + + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + + +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ +#define CONFIG_ENV_SECT_SIZE 0x40000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#endif + +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_QIXIS_I2C_ACCESS +#define SYS_NO_FLASH + +#undef CONFIG_CMD_IMLS +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#else +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() +#endif + +#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY 25000000 /* 25MHz */ + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +#define CONFIG_DDR_SPD +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#define SPD_EEPROM_ADDRESS 0x51 +#define CONFIG_SYS_SPD_BUS_NUM 0 + + +/* + * IFC Definitions + */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +#define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) + +#define CONFIG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1a) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x04000000 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#ifndef SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ + CONFIG_SYS_FLASH_BASE + 0x40000000} +#endif +#endif + +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#define CONFIG_FSL_QIXIS +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_QMAP_MASK 0xe0 +#define QIXIS_QMAP_SHIFT 5 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x0e +#define QIXIS_LBMAP_ALTBANK 0x2e +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_SD_QSPI 0x0e +#define QIXIS_LBMAP_QSPI 0x0e +#define QIXIS_RCW_SRC_SD 0x40 +#define QIXIS_RCW_SRC_QSPI 0x62 +#define QIXIS_RST_CTL_RESET 0x41 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 +#define QIXIS_STAT_PRES1 0xb +#define QIXIS_SDID_MASK 0x07 +#define QIXIS_ESDHC_NO_ADAPTER 0x7 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define SYS_FPGA_CSPR_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) + +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024) +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) +#else +#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12) +#endif +/* QIXIS Timing parameters*/ +#define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define SYS_FPGA_CS_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define SYS_FPGA_CS_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ + FTIM2_GPCM_TCH(0xf) | \ + FTIM2_GPCM_TWP(0x3E)) +#define SYS_FPGA_CS_FTIM3 0x0 + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL +#define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY +#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY +#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY +#define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_CSPR3_FINAL CONFIG_SYS_FPGA_CSPR_FINAL +#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_CS_FTIM0 +#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_CS_FTIM1 +#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_CS_FTIM2 +#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_CS_FTIM3 +#endif + +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 + +/* + * I2C bus multiplexer + */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ +#define I2C_RETIMER_ADDR 0x18 +#define I2C_RETIMER_ADDR2 0x19 +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH5 0xD + +/* +* RTC configuration +*/ +#define RTC +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CONFIG_CMD_DATE + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* QSPI device */ +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 26) +#define FSL_QSPI_FLASH_NUM 2 + +#endif + +#ifdef CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_CS 0 +#endif +#endif + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_FSL_MEMAC + +/* MMC */ +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \ + QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER) + +/* Initial environment variables */ +#if defined(CONFIG_QSPI_BOOT) +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x90100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x1000000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ + "sf read 0x80100000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcmemsize=0x70000000 \0" +#else /* NOR BOOT */ +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x90100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x1000000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0" \ + "mcmemsize=0x70000000 \0" +#endif + +#ifdef CONFIG_FSL_MC_ENET +#define CONFIG_FSL_MEMAC +#define CONFIG_PHYLIB +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_TERANETICS +#define RGMII_PHY1_ADDR 0x1 +#define RGMII_PHY2_ADDR 0x2 +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1d +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F + +#define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0 +#define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1 +#define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2 +#define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3 +#define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4 +#define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5 +#define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6 +#define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7 +#define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8 +#define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9 +#define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa +#define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb +#define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc +#define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd +#define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe +#define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "DPMAC1@xgmii" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +#endif + +#undef CONFIG_CMDLINE_EDITING +#include +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) +#include + +#include + +#endif /* __LS1088A_QDS_H */ From 17d066fc5db1a6f137e5b3113d918e14b1bd0230 Mon Sep 17 00:00:00 2001 From: Ashish Kumar Date: Thu, 31 Aug 2017 16:37:31 +0530 Subject: [PATCH 18/33] armv8: fsl-layerscape: Support to add RGMII for ls1088aqds This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Amrita Kumari Signed-off-by: Ashish Kumar Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 21 +++++++++++++++ arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 4 +++ .../asm/arch-fsl-layerscape/fsl_serdes.h | 1 + .../asm/arch-fsl-layerscape/immap_lsch3.h | 6 +++++ board/freescale/ls1088a/eth_ls1088aqds.c | 1 - drivers/net/ldpaa_eth/ldpaa_wriop.c | 9 +++++++ drivers/net/ldpaa_eth/ls1088a.c | 27 +++++++++++++++++++ include/fsl-mc/ldpaa_wriop.h | 2 ++ 8 files changed, 70 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index ca8cdd8f37..82d61600e1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -57,6 +57,8 @@ config ARCH_LS1088A select SYS_FSL_DDR select SYS_FSL_DDR_LE select SYS_FSL_DDR_VER_50 + select SYS_FSL_EC1 + select SYS_FSL_EC2 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010165 @@ -64,6 +66,7 @@ config ARCH_LS1088A select SYS_FSL_ERRATUM_A008850 select SYS_FSL_HAS_CCI400 select SYS_FSL_HAS_DDR4 + select SYS_FSL_HAS_RGMII select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE @@ -407,6 +410,18 @@ config RESV_RAM be at the high end of physical memory. The reserve RAM may be excluded from memory bank(s) passed to OS, or marked as reserved. +config SYS_FSL_EC1 + bool + help + Ethernet controller 1, this is connected to MAC3. + Provides DPAA2 capabilities + +config SYS_FSL_EC2 + bool + help + Ethernet controller 2, this is connected to MAC4. + Provides DPAA2 capabilities + config SYS_FSL_ERRATUM_A008336 bool @@ -431,6 +446,12 @@ config SYS_FSL_ERRATUM_A009660 config SYS_FSL_ERRATUM_A009929 bool + +config SYS_FSL_HAS_RGMII + bool + depends on SYS_FSL_EC1 || SYS_FSL_EC2 + + config SYS_MC_RSV_MEM_ALIGN hex "Management Complex reserved memory alignment" depends on RESV_RAM diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index ec5806517a..3c9a5edc8b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -517,6 +517,10 @@ int arch_early_init_r(void) printf("Did not wake secondary cores\n"); } +#ifdef CONFIG_SYS_FSL_HAS_RGMII + fsl_rgmii_init(); +#endif + #ifdef CONFIG_SYS_HAS_SERDES fsl_serdes_init(); #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index a2c7578311..12fd6b8bdf 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -159,6 +159,7 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device); enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); int is_serdes_prtcl_valid(int serdes, u32 prtcl); int serdes_get_number(int serdes, int cfg); +void fsl_rgmii_init(void); #ifdef CONFIG_FSL_LSCH2 const char *serdes_clock_to_string(u32 clock); diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 99a7413611..ffc5fa2636 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -247,6 +247,12 @@ struct ccsr_gur { #define FSL_CHASSIS3_SRDS1_REGSR 29 #define FSL_CHASSIS3_SRDS2_REGSR 29 #elif defined(CONFIG_ARCH_LS1088A) +#define FSL_CHASSIS3_EC1_REGSR 26 +#define FSL_CHASSIS3_EC2_REGSR 26 +#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK 0x00000007 +#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT 0 +#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK 0x00000038 +#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT 3 #define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK 0xFFFF0000 #define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT 16 #define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK 0x0000FFFF diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c index a912ff7330..a973457ea7 100644 --- a/board/freescale/ls1088a/eth_ls1088aqds.c +++ b/board/freescale/ls1088a/eth_ls1088aqds.c @@ -597,7 +597,6 @@ int board_eth_init(bd_t *bis) /* Register the real MDIO1 bus */ fm_memac_mdio_init(bis, memac_mdio0_info); - /* Register the muxing front-ends to the MDIO buses */ ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1); ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2); diff --git a/drivers/net/ldpaa_eth/ldpaa_wriop.c b/drivers/net/ldpaa_eth/ldpaa_wriop.c index f7f26c275d..831a330070 100644 --- a/drivers/net/ldpaa_eth/ldpaa_wriop.c +++ b/drivers/net/ldpaa_eth/ldpaa_wriop.c @@ -37,6 +37,15 @@ void wriop_init_dpmac(int sd, int dpmac_id, int lane_prtcl) } } +void wriop_init_dpmac_enet_if(int dpmac_id, phy_interface_t enet_if) +{ + dpmac_info[dpmac_id].enabled = 1; + dpmac_info[dpmac_id].id = dpmac_id; + dpmac_info[dpmac_id].phy_addr = -1; + dpmac_info[dpmac_id].enet_if = enet_if; +} + + /*TODO what it do */ static int wriop_dpmac_to_index(int dpmac_id) { diff --git a/drivers/net/ldpaa_eth/ls1088a.c b/drivers/net/ldpaa_eth/ls1088a.c index 703945cec3..061935e51c 100644 --- a/drivers/net/ldpaa_eth/ls1088a.c +++ b/drivers/net/ldpaa_eth/ls1088a.c @@ -8,6 +8,7 @@ #include #include #include +#include u32 dpmac_to_devdisr[] = { [WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1, @@ -85,3 +86,29 @@ void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl) break; } } + +#ifdef CONFIG_SYS_FSL_HAS_RGMII +void fsl_rgmii_init(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 ec; + +#ifdef CONFIG_SYS_FSL_EC1 + ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC1_REGSR - 1]) + & FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK; + ec >>= FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT; + + if (!ec) + wriop_init_dpmac_enet_if(4, PHY_INTERFACE_MODE_RGMII); +#endif + +#ifdef CONFIG_SYS_FSL_EC2 + ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC2_REGSR - 1]) + & FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK; + ec >>= FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT; + + if (!ec) + wriop_init_dpmac_enet_if(5, PHY_INTERFACE_MODE_RGMII); +#endif +} +#endif diff --git a/include/fsl-mc/ldpaa_wriop.h b/include/fsl-mc/ldpaa_wriop.h index 8ae0fc071e..0ca49564a9 100644 --- a/include/fsl-mc/ldpaa_wriop.h +++ b/include/fsl-mc/ldpaa_wriop.h @@ -69,4 +69,6 @@ void wriop_dpmac_disable(int); void wriop_dpmac_enable(int); phy_interface_t wriop_dpmac_enet_if(int, int); void wriop_init_dpmac_qsgmii(int, int); +void wriop_init_rgmii(void); +void wriop_init_dpmac_enet_if(int , phy_interface_t); #endif /* __LDPAA_WRIOP_H */ From 9f244b3587c264a9bc1187c27252ee31c92968c1 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 31 Aug 2017 16:37:32 +0530 Subject: [PATCH 19/33] armv8: ls1088aqds: Add support of EC1 and EC2 EC1 and EC2 are RGMII interface on ls1088aqds platform. This patch add support of RGMII with PHY and MDIO Signed-off-by: Prabhakar Kushwaha Signed-off-by: Amrita Kumari Signed-off-by: Ashish Kumar Reviewed-by: York Sun --- board/freescale/ls1088a/eth_ls1088aqds.c | 34 ++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c index a973457ea7..c19f59a11c 100644 --- a/board/freescale/ls1088a/eth_ls1088aqds.c +++ b/board/freescale/ls1088a/eth_ls1088aqds.c @@ -576,6 +576,37 @@ void ls1088a_handle_phy_interface_xsgmii(int i) break; } } + +static void ls1088a_handle_phy_interface_rgmii(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 serdes1_prtcl, cfg; + struct mii_dev *bus; + + cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & + FSL_CHASSIS3_SRDS1_PRTCL_MASK; + cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; + serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); + + switch (dpmac_id) { + case 4: + wriop_set_phy_address(dpmac_id, RGMII_PHY1_ADDR); + dpmac_info[dpmac_id].board_mux = EMI1_RGMII1; + bus = mii_dev_for_muxval(EMI1_RGMII1); + wriop_set_mdio(dpmac_id, bus); + break; + case 5: + wriop_set_phy_address(dpmac_id, RGMII_PHY2_ADDR); + dpmac_info[dpmac_id].board_mux = EMI1_RGMII2; + bus = mii_dev_for_muxval(EMI1_RGMII2); + wriop_set_mdio(dpmac_id, bus); + break; + default: + printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} #endif int board_eth_init(bd_t *bis) @@ -604,6 +635,9 @@ int board_eth_init(bd_t *bis) for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { switch (wriop_get_enet_if(i)) { + case PHY_INTERFACE_MODE_RGMII: + ls1088a_handle_phy_interface_rgmii(i); + break; case PHY_INTERFACE_MODE_QSGMII: ls1088a_handle_phy_interface_qsgmii(i); break; From 9a609a88004e5be73d873e229f1b61bd52c749f7 Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:47 +0800 Subject: [PATCH 20/33] armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32() Some erratum patch might need it to program registers. Signed-off-by: Ran Wang Reviewed-by: York Sun --- arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index ea8acedaa1..247f09e0f5 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -29,9 +29,13 @@ #ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE #define scfg_in32(a) in_le32(a) #define scfg_out32(a, v) out_le32(a, v) +#define scfg_clrbits32(addr, clear) clrbits_le32(addr, clear) +#define scfg_clrsetbits32(addr, clear, set) clrsetbits_le32(addr, clear, set) #elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE) #define scfg_in32(a) in_be32(a) #define scfg_out32(a, v) out_be32(a, v) +#define scfg_clrbits32(addr, clear) clrbits_be32(addr, clear) +#define scfg_clrsetbits32(addr, clear, set) clrsetbits_be32(addr, clear, set) #endif #ifdef CONFIG_SYS_FSL_PEX_LUT_LE From 2ab1553f08b1cb4a76764b1a67f75f77554860e3 Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:48 +0800 Subject: [PATCH 21/33] armv8: Add workaround for USB erratum A-009008 USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature Optimal eye at TXREFTUNE value to 0x9 is observed, change set the same value. Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 23 +++++++++++++++++++ .../asm/arch-fsl-layerscape/immap_lsch2.h | 6 +++++ .../asm/arch-fsl-layerscape/immap_lsch3.h | 1 + 4 files changed, 36 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 82d61600e1..64eadfd25a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -16,6 +16,7 @@ config ARCH_LS1043A select SYS_FSL_DDR_BE select SYS_FSL_DDR_VER_50 select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009660 select SYS_FSL_ERRATUM_A009663 select SYS_FSL_ERRATUM_A009929 @@ -39,6 +40,7 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A008336 select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009801 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 @@ -100,6 +102,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008514 select SYS_FSL_ERRATUM_A008585 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009635 select SYS_FSL_ERRATUM_A009663 select SYS_FSL_ERRATUM_A009801 @@ -248,6 +251,9 @@ config LS_PPA_ESBC_HDR_SIZE endmenu +config SYS_FSL_ERRATUM_A009008 + bool "Workaround for USB PHY erratum A009008" + config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index a3b9f6baa4..b9e3a2075a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -54,6 +54,27 @@ bool soc_has_aiop(void) return false; } +static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset) +{ + scfg_clrsetbits32(scfg + offset / 4, + 0xF << 6, + SCFG_USB_TXVREFTUNE << 6); +} + +static void erratum_a009008(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009008 + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1); + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2); + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3); +#elif defined(CONFIG_ARCH_LS2080A) + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR); +#endif +#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */ +} + #if defined(CONFIG_FSL_LSCH3) /* * This erratum requires setting a value to eddrtqcr1 to @@ -200,6 +221,7 @@ void fsl_lsch3_early_init_f(void) #endif erratum_a008514(); erratum_a008336(); + erratum_a009008(); #ifdef CONFIG_CHAIN_OF_TRUST /* In case of Secure Boot, the IBR configures the SMMU * to allow only Secure transactions. @@ -478,6 +500,7 @@ void fsl_lsch2_early_init_f(void) erratum_a009929(); erratum_a009660(); erratum_a010539(); + erratum_a009008(); } #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index f169724379..4e77102d06 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -337,6 +337,12 @@ struct ccsr_gur { #define SCFG_USBPWRFAULT_USB2_SHIFT 2 #define SCFG_USBPWRFAULT_USB1_SHIFT 0 +#define SCFG_BASE 0x01570000 +#define SCFG_USB3PRM1CR_USB1 0x070 +#define SCFG_USB3PRM1CR_USB2 0x07C +#define SCFG_USB3PRM1CR_USB3 0x088 +#define SCFG_USB_TXVREFTUNE 0x9 + #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 #define SCFG_SNPCNFGCR_SATARDSNP 0x00800000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index ffc5fa2636..6e4d243b07 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -133,6 +133,7 @@ #define SCFG_BASE 0x01fc0000 #define SCFG_USB3PRM1CR 0x000 #define SCFG_USB3PRM1CR_INIT 0x27672b2a +#define SCFG_USB_TXVREFTUNE 0x9 #define SCFG_QSPICLKCTLR 0x10 #define TP_ITYP_AV 0x00000001 /* Initiator available */ From 2a8a35395868dd1b610ff064fcdb4906321594fc Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:49 +0800 Subject: [PATCH 22/33] armv8: Add workaround for USB erratum A-009798 The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 24 +++++++++++++++++++ .../asm/arch-fsl-layerscape/immap_lsch2.h | 1 + .../asm/arch-fsl-layerscape/immap_lsch3.h | 1 + 4 files changed, 32 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 64eadfd25a..e77d8866c8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -19,6 +19,7 @@ config ARCH_LS1043A select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009660 select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009929 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 @@ -41,6 +42,7 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008850 select SYS_FSL_ERRATUM_A009008 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 @@ -105,6 +107,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009635 select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 @@ -254,6 +257,9 @@ endmenu config SYS_FSL_ERRATUM_A009008 bool "Workaround for USB PHY erratum A009008" +config SYS_FSL_ERRATUM_A009798 + bool "Workaround for USB PHY erratum A009798" + config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index b9e3a2075a..d9d6e4fd96 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -65,6 +65,7 @@ static void erratum_a009008(void) { #ifdef CONFIG_SYS_FSL_ERRATUM_A009008 u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; + #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1); set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2); @@ -75,6 +76,27 @@ static void erratum_a009008(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */ } +static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset) +{ + scfg_clrbits32(scfg + offset / 4, + SCFG_USB_SQRXTUNE_MASK << 23); +} + +static void erratum_a009798(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009798 + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; + +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1); + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2); + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3); +#elif defined(CONFIG_ARCH_LS2080A) + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR); +#endif +#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */ +} + #if defined(CONFIG_FSL_LSCH3) /* * This erratum requires setting a value to eddrtqcr1 to @@ -222,6 +244,7 @@ void fsl_lsch3_early_init_f(void) erratum_a008514(); erratum_a008336(); erratum_a009008(); + erratum_a009798(); #ifdef CONFIG_CHAIN_OF_TRUST /* In case of Secure Boot, the IBR configures the SMMU * to allow only Secure transactions. @@ -501,6 +524,7 @@ void fsl_lsch2_early_init_f(void) erratum_a009660(); erratum_a010539(); erratum_a009008(); + erratum_a009798(); } #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 4e77102d06..17a4c086f0 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -342,6 +342,7 @@ struct ccsr_gur { #define SCFG_USB3PRM1CR_USB2 0x07C #define SCFG_USB3PRM1CR_USB3 0x088 #define SCFG_USB_TXVREFTUNE 0x9 +#define SCFG_USB_SQRXTUNE_MASK 0x7 #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 6e4d243b07..3c91e69bd9 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -134,6 +134,7 @@ #define SCFG_USB3PRM1CR 0x000 #define SCFG_USB3PRM1CR_INIT 0x27672b2a #define SCFG_USB_TXVREFTUNE 0x9 +#define SCFG_USB_SQRXTUNE_MASK 0x7 #define SCFG_QSPICLKCTLR 0x10 #define TP_ITYP_AV 0x00000001 /* Initiator available */ From 9d1cd910f7fcea3c918153b7feb32323af0197d9 Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:50 +0800 Subject: [PATCH 23/33] armv8: Add workaround for USB erratum A-008997 Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter settings Change config of transmitter signal swings by setting register PCSTXSWINGFULL to 0x47 to pass compliance tests. Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 24 +++++++++++++++++++ .../asm/arch-fsl-layerscape/immap_lsch2.h | 4 ++++ 3 files changed, 34 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index e77d8866c8..b6410d731f 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -16,6 +16,7 @@ config ARCH_LS1043A select SYS_FSL_DDR_BE select SYS_FSL_DDR_VER_50 select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009660 select SYS_FSL_ERRATUM_A009663 @@ -41,6 +42,7 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A008336 select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 @@ -104,6 +106,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008514 select SYS_FSL_ERRATUM_A008585 + select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009635 select SYS_FSL_ERRATUM_A009663 @@ -254,6 +257,9 @@ config LS_PPA_ESBC_HDR_SIZE endmenu +config SYS_FSL_ERRATUM_A008997 + bool "Workaround for USB PHY erratum A008997" + config SYS_FSL_ERRATUM_A009008 bool "Workaround for USB PHY erratum A009008" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index d9d6e4fd96..c7180f1ebe 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -97,6 +97,28 @@ static void erratum_a009798(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */ } +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) +static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset) +{ + scfg_clrsetbits32(scfg + offset / 4, + 0x7F << 9, + SCFG_USB_PCSTXSWINGFULL << 9); +} +#endif + +static void erratum_a008997(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A008997 +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; + + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1); + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2); + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3); +#endif +#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */ +} + #if defined(CONFIG_FSL_LSCH3) /* * This erratum requires setting a value to eddrtqcr1 to @@ -245,6 +267,7 @@ void fsl_lsch3_early_init_f(void) erratum_a008336(); erratum_a009008(); erratum_a009798(); + erratum_a008997(); #ifdef CONFIG_CHAIN_OF_TRUST /* In case of Secure Boot, the IBR configures the SMMU * to allow only Secure transactions. @@ -525,6 +548,7 @@ void fsl_lsch2_early_init_f(void) erratum_a010539(); erratum_a009008(); erratum_a009798(); + erratum_a008997(); } #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 17a4c086f0..ebb99a8e2c 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -339,10 +339,14 @@ struct ccsr_gur { #define SCFG_BASE 0x01570000 #define SCFG_USB3PRM1CR_USB1 0x070 +#define SCFG_USB3PRM2CR_USB1 0x074 #define SCFG_USB3PRM1CR_USB2 0x07C +#define SCFG_USB3PRM2CR_USB2 0x080 #define SCFG_USB3PRM1CR_USB3 0x088 +#define SCFG_USB3PRM2CR_USB3 0x08c #define SCFG_USB_TXVREFTUNE 0x9 #define SCFG_USB_SQRXTUNE_MASK 0x7 +#define SCFG_USB_PCSTXSWINGFULL 0x47 #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 From 15d59b5316425a21e057bff171c0459f29d00d6d Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:51 +0800 Subject: [PATCH 24/33] armv8: Add workaround for USB erratum A-009007 Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8 ++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 40 +++++++++++++++++++ .../asm/arch-fsl-layerscape/immap_lsch2.h | 8 ++++ .../asm/arch-fsl-layerscape/immap_lsch3.h | 9 +++++ 4 files changed, 65 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index b6410d731f..3518d8601d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -17,6 +17,7 @@ config ARCH_LS1043A select SYS_FSL_DDR_VER_50 select SYS_FSL_ERRATUM_A008850 select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009660 select SYS_FSL_ERRATUM_A009663 @@ -43,6 +44,7 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008850 select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 @@ -107,6 +109,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A008514 select SYS_FSL_ERRATUM_A008585 select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009635 select SYS_FSL_ERRATUM_A009663 @@ -260,6 +263,11 @@ endmenu config SYS_FSL_ERRATUM_A008997 bool "Workaround for USB PHY erratum A008997" +config SYS_FSL_ERRATUM_A009007 + bool + help + Workaround for USB PHY erratum A009007 + config SYS_FSL_ERRATUM_A009008 bool "Workaround for USB PHY erratum A009008" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index c7180f1ebe..6698c0467d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -119,6 +119,44 @@ static void erratum_a008997(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */ } +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) + +#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) + +#elif defined(CONFIG_ARCH_LS2080A) + +#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ + out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ + out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \ + out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \ + out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) + +#endif + +static void erratum_a009007(void) +{ +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) + void __iomem *usb_phy = (void __iomem *)SCFG_USB_PHY1; + + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); + + usb_phy = (void __iomem *)SCFG_USB_PHY2; + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); + + usb_phy = (void __iomem *)SCFG_USB_PHY3; + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); +#elif defined(CONFIG_ARCH_LS2080A) + void __iomem *dcsr = (void __iomem *)DCSR_BASE; + + PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1); + PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY2); +#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */ +} + #if defined(CONFIG_FSL_LSCH3) /* * This erratum requires setting a value to eddrtqcr1 to @@ -268,6 +306,7 @@ void fsl_lsch3_early_init_f(void) erratum_a009008(); erratum_a009798(); erratum_a008997(); + erratum_a009007(); #ifdef CONFIG_CHAIN_OF_TRUST /* In case of Secure Boot, the IBR configures the SMMU * to allow only Secure transactions. @@ -549,6 +588,7 @@ void fsl_lsch2_early_init_f(void) erratum_a009008(); erratum_a009798(); erratum_a008997(); + erratum_a009007(); } #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index ebb99a8e2c..2561ead7c3 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -347,6 +347,14 @@ struct ccsr_gur { #define SCFG_USB_TXVREFTUNE 0x9 #define SCFG_USB_SQRXTUNE_MASK 0x7 #define SCFG_USB_PCSTXSWINGFULL 0x47 +#define SCFG_USB_PHY1 0x084F0000 +#define SCFG_USB_PHY2 0x08500000 +#define SCFG_USB_PHY3 0x08510000 +#define SCFG_USB_PHY_RX_OVRD_IN_HI 0x200c +#define USB_PHY_RX_EQ_VAL_1 0x0000 +#define USB_PHY_RX_EQ_VAL_2 0x0080 +#define USB_PHY_RX_EQ_VAL_3 0x0380 +#define USB_PHY_RX_EQ_VAL_4 0x0b80 #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 3c91e69bd9..6c74ee05d1 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -137,6 +137,15 @@ #define SCFG_USB_SQRXTUNE_MASK 0x7 #define SCFG_QSPICLKCTLR 0x10 +#define DCSR_BASE 0x700000000ULL +#define DCSR_USB_PHY1 0x4600000 +#define DCSR_USB_PHY2 0x4610000 +#define DCSR_USB_PHY_RX_OVRD_IN_HI 0x200C +#define USB_PHY_RX_EQ_VAL_1 0x0000 +#define USB_PHY_RX_EQ_VAL_2 0x0080 +#define USB_PHY_RX_EQ_VAL_3 0x0380 +#define USB_PHY_RX_EQ_VAL_4 0x0b80 + #define TP_ITYP_AV 0x00000001 /* Initiator available */ #define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */ #define TP_ITYP_TYPE_ARM 0x0 From 83fa71189af3354cd09a56d61f3ed31ce082f51f Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:52 +0800 Subject: [PATCH 25/33] armv7: Add workaround for USB erratum A-009008 USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature Optimal eye at TXREFTUNE value to 0x9 is observed, change set the same value. Signed-off-by: Sriram Dash Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv7/ls102xa/Kconfig | 6 ++++++ arch/arm/cpu/armv7/ls102xa/soc.c | 15 +++++++++++++++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 4 ++++ 3 files changed, 25 insertions(+) diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 90d99e6cc3..be30dd8442 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -2,6 +2,7 @@ config ARCH_LS1021A bool select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009663 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 @@ -58,6 +59,11 @@ config SYS_CCI400_OFFSET Offset for CCI400 base. CCI400 base addr = CCSRBAR + CCI400_OFFSET +config SYS_FSL_ERRATUM_A009008 + bool + help + Workaround for USB PHY erratum A009008 + config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index c043b82ab7..eed06a3c7c 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -60,6 +60,18 @@ unsigned int get_soc_major_rev(void) return major; } +static void erratum_a009008(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009008 + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; + + clrsetbits_be32(scfg + SCFG_USB3PRM1CR / 4, + 0xF << 6, + SCFG_USB_TXVREFTUNE << 6); +#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */ +} + + void s_init(void) { } @@ -147,6 +159,9 @@ int arch_soc_init(void) */ out_be32(&scfg->eddrtqcfg, 0x63b20042); + /* Erratum */ + erratum_a009008(); + return 0; } diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 1415b0b6ff..28c1a98418 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -174,6 +174,10 @@ struct ccsr_gur { #define SCFG_PMCINTECR_ETSECERRG1 0x00040000 #define SCFG_CLUSTERPMCR_WFIL2EN 0x80000000 +#define SCFG_BASE 0x01570000 +#define SCFG_USB3PRM1CR 0x070 +#define SCFG_USB_TXVREFTUNE 0x9 + /* Supplemental Configuration Unit */ struct ccsr_scfg { u32 dpslpcr; From c1853f6f7348d86faead6ffe30c25db9d7cef144 Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:53 +0800 Subject: [PATCH 26/33] armv7: Add workaround for USB erratum A-009798 The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receive Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv7/ls102xa/Kconfig | 6 ++++++ arch/arm/cpu/armv7/ls102xa/soc.c | 10 ++++++++++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 1 + 3 files changed, 17 insertions(+) diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index be30dd8442..a9fc65ff11 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -4,6 +4,7 @@ config ARCH_LS1021A select SYS_FSL_ERRATUM_A008407 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 select SYS_FSL_HAS_CCI400 @@ -64,6 +65,11 @@ config SYS_FSL_ERRATUM_A009008 help Workaround for USB PHY erratum A009008 +config SYS_FSL_ERRATUM_A009798 + bool + help + Workaround for USB PHY erratum A009798 + config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index eed06a3c7c..4f94df79f8 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -71,6 +71,15 @@ static void erratum_a009008(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */ } +static void erratum_a009798(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009798 + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; + + clrbits_be32(scfg + SCFG_USB3PRM1CR / 4, + SCFG_USB_SQRXTUNE_MASK << 23); +#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */ +} void s_init(void) { @@ -161,6 +170,7 @@ int arch_soc_init(void) /* Erratum */ erratum_a009008(); + erratum_a009798(); return 0; } diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 28c1a98418..bc5125d833 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -177,6 +177,7 @@ struct ccsr_gur { #define SCFG_BASE 0x01570000 #define SCFG_USB3PRM1CR 0x070 #define SCFG_USB_TXVREFTUNE 0x9 +#define SCFG_USB_SQRXTUNE_MASK 0x7 /* Supplemental Configuration Unit */ struct ccsr_scfg { From e10d114279f01899c7eb47f5977dbceca6b6efaf Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:54 +0800 Subject: [PATCH 27/33] armv7: Add workaround for USB erratum A-008997 Low Frequency Periodic Singaling (LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter settings Change config of transmitter signal swings by setting register PCSTXSWINGFULL to 0x47 to pass compliance tests. Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv7/ls102xa/Kconfig | 6 ++++++ arch/arm/cpu/armv7/ls102xa/soc.c | 13 +++++++++++++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 3 +++ 3 files changed, 22 insertions(+) diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index a9fc65ff11..a84cda8592 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -2,6 +2,7 @@ config ARCH_LS1021A bool select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 + select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009663 select SYS_FSL_ERRATUM_A009798 @@ -60,6 +61,11 @@ config SYS_CCI400_OFFSET Offset for CCI400 base. CCI400 base addr = CCSRBAR + CCI400_OFFSET +config SYS_FSL_ERRATUM_A008997 + bool + help + Workaround for USB PHY erratum A008997 + config SYS_FSL_ERRATUM_A009008 bool help diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index 4f94df79f8..07b525d7a3 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -81,6 +81,18 @@ static void erratum_a009798(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */ } +static void erratum_a008997(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A008997 + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; + + clrsetbits_be32(scfg + SCFG_USB3PRM2CR / 4, + SCFG_USB_PCSTXSWINGFULL_MASK, + SCFG_USB_PCSTXSWINGFULL_VAL); +#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */ +} + + void s_init(void) { } @@ -171,6 +183,7 @@ int arch_soc_init(void) /* Erratum */ erratum_a009008(); erratum_a009798(); + erratum_a008997(); return 0; } diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index bc5125d833..25e65cbd26 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -178,6 +178,9 @@ struct ccsr_gur { #define SCFG_USB3PRM1CR 0x070 #define SCFG_USB_TXVREFTUNE 0x9 #define SCFG_USB_SQRXTUNE_MASK 0x7 +#define SCFG_USB3PRM2CR 0x074 +#define SCFG_USB_PCSTXSWINGFULL_MASK 0x0000FE00 +#define SCFG_USB_PCSTXSWINGFULL_VAL 0x00008E00 /* Supplemental Configuration Unit */ struct ccsr_scfg { From 0e8a4264ec705b4d4e381dcb7e1e050dc1b5123d Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Mon, 4 Sep 2017 18:46:55 +0800 Subject: [PATCH 28/33] armv7: Add workaround for USB erratum A-009007 Rx Compliance tests may fail intermittently at high jitter frequencies using default register values Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Suresh Gupta Signed-off-by: Ran Wang [YS: Reordered Kconfig options] Reviewed-by: York Sun --- arch/arm/cpu/armv7/ls102xa/Kconfig | 6 ++++++ arch/arm/cpu/armv7/ls102xa/soc.c | 12 ++++++++++++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 7 +++++++ 3 files changed, 25 insertions(+) diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index a84cda8592..20e2b1a50a 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -3,6 +3,7 @@ config ARCH_LS1021A select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009663 select SYS_FSL_ERRATUM_A009798 @@ -66,6 +67,11 @@ config SYS_FSL_ERRATUM_A008997 help Workaround for USB PHY erratum A008997 +config SYS_FSL_ERRATUM_A009007 + bool + help + Workaround for USB PHY erratum A009007 + config SYS_FSL_ERRATUM_A009008 bool help diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index 07b525d7a3..e10037d711 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -92,6 +92,17 @@ static void erratum_a008997(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */ } +static void erratum_a009007(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009007 + void __iomem *usb_phy = (void __iomem *)USB_PHY_BASE; + + out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); + out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); + out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); + out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4); +#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */ +} void s_init(void) { @@ -184,6 +195,7 @@ int arch_soc_init(void) erratum_a009008(); erratum_a009798(); erratum_a008997(); + erratum_a009007(); return 0; } diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 25e65cbd26..fe0bbb9d93 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -182,6 +182,13 @@ struct ccsr_gur { #define SCFG_USB_PCSTXSWINGFULL_MASK 0x0000FE00 #define SCFG_USB_PCSTXSWINGFULL_VAL 0x00008E00 +#define USB_PHY_BASE 0x08510000 +#define USB_PHY_RX_OVRD_IN_HI 0x200c +#define USB_PHY_RX_EQ_VAL_1 0x0000 +#define USB_PHY_RX_EQ_VAL_2 0x8000 +#define USB_PHY_RX_EQ_VAL_3 0x8004 +#define USB_PHY_RX_EQ_VAL_4 0x800C + /* Supplemental Configuration Unit */ struct ccsr_scfg { u32 dpslpcr; From e9303a4146cdc1761c8156627a8265e43dc0dc58 Mon Sep 17 00:00:00 2001 From: York Sun Date: Thu, 7 Sep 2017 10:12:32 -0700 Subject: [PATCH 29/33] armv8: fsl-layerscape: Fix MC reserved memory calculation In case high region memory doesn't have enough space for Management Complex (MC), the return value should indicate a failure so the caller can handle it accordingly. Signed-off-by: York Sun Reported-by: Ebony Zhu --- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 3c9a5edc8b..d21a49454e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -619,13 +619,22 @@ void efi_reset_system_init(void) #endif +/* + * Calculate reserved memory with given memory bank + * Return aligned memory size on success + * Return (ram_size + needed size) for failure + */ phys_size_t board_reserve_ram_top(phys_size_t ram_size) { phys_size_t ram_top = ram_size; #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) + ram_top = mc_get_dram_block_size(); + if (ram_top > ram_size) + return ram_size + ram_top; + + ram_top = ram_size - ram_top; /* The start address of MC reserved memory needs to be aligned. */ - ram_top -= mc_get_dram_block_size(); ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1); #endif @@ -669,8 +678,8 @@ phys_size_t get_effective_memsize(void) /* Check if we have enough memory for MC */ if (rem < board_reserve_ram_top(rem)) { /* Not enough memory in high region to reserve */ - if (ea_size > board_reserve_ram_top(rem)) - ea_size -= board_reserve_ram_top(rem); + if (ea_size > board_reserve_ram_top(ea_size)) + ea_size -= board_reserve_ram_top(ea_size); else printf("Error: No enough space for reserved memory.\n"); } From c4787f4b23a7903135f5884e756be3507308ca47 Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Mon, 4 Sep 2017 10:47:52 +0800 Subject: [PATCH 30/33] armv8: ls1088a: fix the MMU table for pcie config space The pcie config space of ls1088a is different from ls2080a. Signed-off-by: Hou Zhiqiang Reviewed-by: York Sun --- arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 6c74ee05d1..957e23b02a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -107,10 +107,16 @@ #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000) #define CONFIG_SYS_PCIE4_ADDR (CONFIG_SYS_IMMR + 0x2700000) +#ifdef CONFIG_ARCH_LS1088A +#define CONFIG_SYS_PCIE1_PHYS_ADDR 0x2000000000ULL +#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x2800000000ULL +#define CONFIG_SYS_PCIE3_PHYS_ADDR 0x3000000000ULL +#else #define CONFIG_SYS_PCIE1_PHYS_ADDR 0x1000000000ULL #define CONFIG_SYS_PCIE2_PHYS_ADDR 0x1200000000ULL #define CONFIG_SYS_PCIE3_PHYS_ADDR 0x1400000000ULL #define CONFIG_SYS_PCIE4_PHYS_ADDR 0x1600000000ULL +#endif /* Device Configuration */ #define DCFG_BASE 0x01e00000 From 4c5c87da7b73698bb43d2e522038f82e91c0906a Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Mon, 4 Sep 2017 10:47:53 +0800 Subject: [PATCH 31/33] armv8: ls1088a: add PCIe dts node Signed-off-by: Hou Zhiqiang Reviewed-by: York Sun --- arch/arm/dts/fsl-ls1088a.dtsi | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index 421d2de799..d943a9efa3 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -75,4 +75,52 @@ reg-names = "QuadSPI", "QuadSPI-memory"; num-cs = <4>; }; + + pcie@3400000 { + compatible = "fsl,ls-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ + 0x00 0x03480000 0x0 0x80000 /* lut registers */ + 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ + 0x20 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; + + pcie@3500000 { + compatible = "fsl,ls-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ + 0x00 0x03580000 0x0 0x80000 /* lut registers */ + 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ + 0x28 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; + + pcie@3600000 { + compatible = "fsl,ls-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ + 0x00 0x03680000 0x0 0x80000 /* lut registers */ + 0x00 0x036c0000 0x0 0x40000 /* pf controls registers */ + 0x30 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; }; From 4950eb4a48623d8ad013c1f37097906ec52040d1 Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Mon, 4 Sep 2017 10:47:54 +0800 Subject: [PATCH 32/33] armv8: ls1088a: Enable PCIe in defconfigs Enabled PCIe support and PCI command feature. Signed-off-by: Hou Zhiqiang Reviewed-by: York Sun --- configs/ls1088aqds_qspi_defconfig | 4 ++++ configs/ls1088ardb_qspi_defconfig | 4 ++++ include/configs/ls1088a_common.h | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index 6fff149fb6..4b0d604fa0 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -22,6 +22,10 @@ CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_FSL_DSPI=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 33e41247e6..2d5a134261 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -22,6 +22,10 @@ CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_FSL_DSPI=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index c78ba5d6b6..84e9b140d0 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -44,6 +44,10 @@ */ #define CPU_RELEASE_ADDR secondary_boot_func +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#endif + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) From 42f43aa25876d1c77002ee5f333ab36dcb01d719 Mon Sep 17 00:00:00 2001 From: York Sun Date: Fri, 8 Sep 2017 09:33:49 -0700 Subject: [PATCH 33/33] armv8: fsl-layerscape: Add back L3 flushing for all exception levels CCN-504 HPF registers were believed to be accessible only from EL3. However, recent tests proved otherwise. Remove checking for exception level to re-enable L3 cache flushing for all levels. Signed-off-by: York Sun Tested-by: Zhao Qiang --- arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 5ff01a0e1b..fa93096c68 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -396,9 +396,6 @@ ENTRY(__asm_flush_l3_dcache) mov x29, lr mov x8, #0 - switch_el x0, 1f, 100f, 100f /* skip if not in EL3 */ - -1: dsb sy mov x0, #0x1 /* HNFPSTAT_SFONLY */ bl hnf_set_pstate @@ -416,7 +413,6 @@ ENTRY(__asm_flush_l3_dcache) bl hnf_pstate_poll cbz x0, 1f add x8, x8, #0x2 -100: 1: mov x0, x8 mov lr, x29