diff --git a/CHANGELOG b/CHANGELOG
index e43806969a..fb6cebb548 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,26 @@
Changes for U-Boot 1.0.2:
======================================================================
+* Patches by Travis Sawyer, 12 Mar 2004:
+ - Fix Gigabit Ethernet support for 440GX
+ - Add Gigabit Ethernet Support to MII PHY utilities
+
+* Patch by Brad Kemp, 12 Mar 2004:
+ Fixes for drivers/cfi_flash.c:
+ - Better support for x8/x16 implementations
+ - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
+ - Added defines for AMD command and address constants
+
+* Patch by Leon Kukovec, 12 Mar 2004:
+ Fix get_dentfromdir() to correctly handle deleted dentries
+
+* Patch by George G. Davis, 11 Mar 2004:
+ Remove hard coded network settings in TI OMAP1610 H2
+ default board config
+
+* Patch by George G. Davis, 11 Mar 2004:
+ add support for ADS GraphicsClient+ board.
+
* Patch by Pierre Aubert, 11 Mar 2004:
- add bitmap command and splash screen support in cfb console
- add [optional] origin in the bitmap display command
diff --git a/MAKEALL b/MAKEALL
index 797c6c6412..e058ad0e34 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -122,7 +122,7 @@ LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
## StrongARM Systems
#########################################################################
-LIST_SA="dnp1110 lart shannon"
+LIST_SA="dnp1110 gcplus lart shannon"
#########################################################################
## ARM7 Systems
diff --git a/Makefile b/Makefile
index e7505fb418..1f13c77354 100644
--- a/Makefile
+++ b/Makefile
@@ -908,12 +908,15 @@ ZUMA_config: unconfig
at91rm9200dk_config : unconfig
@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
-lart_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 lart
-
dnp1110_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 dnp1110
+gcplus_config : unconfig
+ @./mkconfig $(@:_config=) arm sa1100 gcplus
+
+lart_config : unconfig
+ @./mkconfig $(@:_config=) arm sa1100 lart
+
shannon_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 shannon
diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile
new file mode 100644
index 0000000000..d0f7d1cffa
--- /dev/null
+++ b/board/gcplus/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# 2003 (c) MontaVista Software, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := gcplus.o flash.o
+SOBJS := memsetup.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/gcplus/config.mk b/board/gcplus/config.mk
new file mode 100644
index 0000000000..57326b8547
--- /dev/null
+++ b/board/gcplus/config.mk
@@ -0,0 +1,13 @@
+#
+# ADS GCPlus board with SA1110 cpu
+#
+# The ADS GCPlus has 2 banks of 16 MiB SDRAM
+#
+# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM
+# at c020'0000 and then move ourself to c8f0'0000. Basically, just
+# install the U-Boot binary as you would the Linux zImage and then
+# reap the benfits of more convenient Linux development cycles, i.e.
+# bootp;tftp;bootm, repeat, etc.,.
+#
+
+TEXT_BASE = 0xc8f00000
diff --git a/board/gcplus/flash.c b/board/gcplus/flash.c
new file mode 100644
index 0000000000..5455656d12
--- /dev/null
+++ b/board/gcplus/flash.c
@@ -0,0 +1,440 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * 2003 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) __swab16(x)
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPW * addr, flash_info_t * info);
+static int write_data(flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+void inline spin_wheel(void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long
+flash_init(void)
+{
+ int i;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
+ break;
+ default:
+ panic("configured too many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void
+flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info(flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf("INTEL ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F128J3A:
+ printf("28F128J3A\n");
+ break;
+ case FLASH_28F640J5:
+ printf("28F640J5\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong
+flash_get_size(FPW * addr, flash_info_t * info)
+{
+ volatile FPW value;
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb();
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb();
+ value = addr[1]; /* device ID */
+ switch (value) {
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ break; /* => 16 MB */
+ case (FPW) INTEL_ID_28F640J5:
+ info->flash_id += FLASH_28F640J5;
+ info->sector_count = 64;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ start = get_timer(0);
+ last = start;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+
+ while (((status =
+ *addr) & (FPW) 0x00800080) !=
+ (FPW) 0x00800080) {
+ if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ *addr = (FPW) 0x00B000B0; /* suspend erase */
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = (FPW) 0x00500050; /* clear status register cmd. */
+ *addr = (FPW) 0x00FF00FF; /* resest to read mode */
+
+ printf(" done\n");
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int
+write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data(info, wp, SWAP(data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data(info, wp, SWAP(data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data(info, wp, SWAP(data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_data(flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+void inline
+spin_wheel(void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c
new file mode 100644
index 0000000000..06b6098a3c
--- /dev/null
+++ b/board/gcplus/gcplus.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * 2003-2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int
+board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_arch_number = 29; /* ADS GraphicsClientPlus Board */
+
+ gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
+
+ /* Most of the ADS GCPlus I/O is connected to Static nCS2.
+ * So I'm brute forcing nCS2 timiming here for worst case.
+ */
+ MSC1 &= ~0xFFFF;
+ MSC1 |= 0x8649;
+
+ /* Nothing is connected to Static nCS4 or nCS5. But I'm using
+ * nCS4 as a paranoia safe guard to force nCS2, nOE; nWE high
+ * after accessing I/O via (non-VLIO) nCS2. What can I say, I'm
+ * paranoid and lack decent tools to alleviate my fear. I sure
+ * do wish I had a logic analyzer. : (
+ */
+
+ MSC2 = 0xfff9fff9;
+
+ return 0;
+}
+
+int
+dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+
+ return (0);
+}
diff --git a/board/gcplus/memsetup.S b/board/gcplus/memsetup.S
new file mode 100644
index 0000000000..02f5685824
--- /dev/null
+++ b/board/gcplus/memsetup.S
@@ -0,0 +1,77 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ * 2003-2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include "config.h"
+#include "version.h"
+
+
+ .globl memsetup
+memsetup:
+ /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us.
+ * However the darn thing leaves the MMU enabled before handing control
+ * over to us. So we need to disable the MMU and we use memsetup
+ * to do it.
+ */
+
+@ The following code segment was borrowed with gratitude from:
+@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S
+
+ @ Data cache might be active.
+ @ Be sure to flush kernel binary out of the cache,
+ @ whatever state it is, before it is turned off.
+ @ This is done by fetching through currently executed
+ @ memory to be sure we hit the same cache.
+ bic r2, pc, #0x1f
+ add r3, r2, #0x4000 @ 16 kb is quite enough...
+1: ldr r0, [r2], #32
+ teq r2, r3
+ bne 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches
+
+ @ disabling MMU and caches
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ bic r0, r0, #0x0d @ clear WB, DC, MMU
+ bic r0, r0, #0x1000 @ clear Icache
+ mcr p15, 0, r0, c1, c0, 0
+
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ b 2f
+2:
+ nop
+ nop
+ nop
+ nop
+ nop
+
+
+ mov pc, lr
diff --git a/board/gcplus/u-boot.lds b/board/gcplus/u-boot.lds
new file mode 100644
index 0000000000..f625b48c3a
--- /dev/null
+++ b/board/gcplus/u-boot.lds
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * 2003 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/sa1100/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index abbdaa2be3..cbad7dbb32 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -103,7 +103,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"Rev = 0x%02X, "
"%3dbaseT, %s\n",
j, oui, model, rev,
- miiphy_speed (j) == _100BASET ? 100 : 10,
+ miiphy_speed (j),
miiphy_duplex (j) == FULL ? "FDX" : "HDX");
}
}
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 03964da81f..b45ab06157 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -135,11 +135,20 @@ int miiphy_speed (unsigned char addr)
{
unsigned short reg;
+ if (miiphy_read (addr, PHY_1000BTSR, ®)) {
+ printf ("PHY 1000BT Status read failed\n");
+ } else {
+ if (reg != 0xFFFF) {
+ if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) !=0) {
+ return (_1000BASET);
+ }
+ }
+ }
+
if (miiphy_read (addr, PHY_ANLPAR, ®)) {
printf ("PHY speed1 read failed, assuming 10bT\n");
return (_10BASET);
}
-
if ((reg & PHY_ANLPAR_100) != 0) {
return (_100BASET);
} else {
@@ -156,6 +165,20 @@ int miiphy_duplex (unsigned char addr)
{
unsigned short reg;
+
+ if (miiphy_read (addr, PHY_1000BTSR, ®)) {
+ printf ("PHY 1000BT Status read failed\n");
+ } else {
+ if ( (reg != 0xFFFF) &&
+ (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) ) {
+ if ((reg & PHY_1000BTSR_1000FD) !=0) {
+ return (FULL);
+ } else {
+ return (HALF);
+ }
+ }
+ }
+
if (miiphy_read (addr, PHY_ANLPAR, ®)) {
printf ("PHY duplex read failed, assuming half duplex\n");
return (HALF);
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index ba7418a971..91cf240ac6 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -175,6 +175,100 @@ static void ppc_440x_eth_halt (struct eth_device *dev)
extern int phy_setup_aneg (unsigned char addr);
extern int miiphy_reset (unsigned char addr);
+#if defined (CONFIG_440_GX)
+int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis)
+{
+ unsigned long pfc1;
+ unsigned long zmiifer;
+ unsigned long rmiifer;
+
+ mfsdr(sdr_pfc1, pfc1);
+ pfc1 = SDR0_PFC1_EPS_DECODE(pfc1);
+
+ zmiifer = 0;
+ rmiifer = 0;
+
+ switch (pfc1) {
+ case 1:
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2);
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[2] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[3] = BI_PHYMODE_ZMII;
+ break;
+ case 2:
+ zmiifer = ZMII_FER_SMII << ZMII_FER_V(0);
+ zmiifer = ZMII_FER_SMII << ZMII_FER_V(1);
+ zmiifer = ZMII_FER_SMII << ZMII_FER_V(2);
+ zmiifer = ZMII_FER_SMII << ZMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[2] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[3] = BI_PHYMODE_ZMII;
+ break;
+ case 3:
+ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2);
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ bis->bi_phymode[2] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[3] = BI_PHYMODE_NONE;
+ break;
+ case 4:
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (2);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (3);
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[2] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[3] = BI_PHYMODE_RGMII;
+ break;
+ case 5:
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V (2);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[2] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[3] = BI_PHYMODE_RGMII;
+ break;
+ case 6:
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2);
+ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3);
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[2] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[3] = BI_PHYMODE_RGMII;
+ break;
+ case 0:
+ default:
+ zmiifer = ZMII_FER_MII << ZMII_FER_V(devnum);
+ rmiifer = 0x0;
+ bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[2] = BI_PHYMODE_ZMII;
+ bis->bi_phymode[3] = BI_PHYMODE_ZMII;
+ break;
+ }
+
+ /* Ensure we setup mdio for this devnum and ONLY this devnum */
+ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
+
+ out32 (ZMII_FER, zmiifer);
+ out32 (RGMII_FER, rmiifer);
+
+ return ((int)pfc1);
+
+}
+#endif
+
static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
{
int i;
@@ -187,11 +281,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
unsigned short devnum;
unsigned short reg_short;
sys_info_t sysinfo;
-#if defined (CONFIG_440_GX)
- unsigned long pfc1;
- unsigned long zmiifer;
- unsigned long rmiifer;
-#endif
+ int ethgroup;
EMAC_440GX_HW_PST hw_p = dev->priv;
@@ -269,66 +359,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
udelay (100);
#if defined(CONFIG_440_GX)
- mfsdr(sdr_pfc1, pfc1);
- pfc1 = SDR0_PFC1_EPS_DECODE(pfc1);
-
- switch (pfc1) {
- case 1:
- zmiifer = (ZMII_FER_MDI | ZMII_FER_RMII) << ZMII_FER_V(devnum);
- rmiifer = 0x0;
- break;
- case 2:
- zmiifer = (ZMII_FER_MDI | ZMII_FER_SMII) << ZMII_FER_V(devnum);
- rmiifer = 0x0;
- break;
- case 3:
- if (devnum == 0) {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_RMII) << ZMII_FER_V(devnum);
- rmiifer = 0x0;
- } else if (devnum == 2) {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_RMII) << ZMII_FER_V(devnum);
- rmiifer = RGMII_FER_RGMII << RGMII_FER_V(devnum);
- } else { /* invalid case */
- zmiifer = 0x0;
- rmiifer = 0x0;
- }
- break;
- case 4:
- if ((devnum == 0) || (devnum == 1)) {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_SMII) << ZMII_FER_V (devnum);
- rmiifer = 0x0;
- } else { /* ((devnum == 2) || (devnum == 3)) */
- zmiifer = (ZMII_FER_MDI/* | ZMII_FER_RMII */) << ZMII_FER_V (devnum);
- rmiifer = RGMII_FER_RGMII << RGMII_FER_V (devnum);
- }
- break;
- case 5:
- if ((devnum == 0) || (devnum == 1) || (devnum == 2)) {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_SMII) << ZMII_FER_V (devnum);
- rmiifer = 0x0;
- } else {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_RMII) << ZMII_FER_V(devnum);
- rmiifer = RGMII_FER_RGMII << RGMII_FER_V(devnum);
- }
- break;
- case 6:
- if ((devnum == 0) || (devnum == 1)) {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_SMII) << ZMII_FER_V (devnum);
- rmiifer = 0x0;
- } else {
- zmiifer = (ZMII_FER_MDI | ZMII_FER_RMII) << ZMII_FER_V(devnum);
- rmiifer = RGMII_FER_RGMII << RGMII_FER_V(devnum);
- }
- break;
- case 0:
- default:
- zmiifer = (ZMII_FER_MDI | ZMII_FER_MII) << ZMII_FER_V(devnum);
- rmiifer = 0x0;
- break;
- }
-
- out32 (ZMII_FER, zmiifer);
- out32 (RGMII_FER, rmiifer);
+ ethgroup = ppc_440x_eth_setup_bridge(devnum, bis);
#else
if ((devnum == 0) || (devnum == 1)) {
out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
@@ -338,6 +369,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
(RGMII_FER_RGMII << RGMII_FER_V (3))));
}
+
#endif
out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
__asm__ volatile ("eieio");
@@ -397,16 +429,17 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* Reset the phy */
miiphy_reset (reg);
+#if defined(CONFIG_440_GX)
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
* for RGMII mode.
*/
- if ( ((devnum == 2) || (devnum ==3)) && (4 == pfc1) ) {
+ if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) {
miiphy_write (reg, 23, 0x1200);
}
#endif
-
+#endif
/* Start/Restart autonegotiation */
phy_setup_aneg (reg);
udelay (1000);
@@ -451,7 +484,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* Set ZMII/RGMII speed according to the phy link speed */
reg = in32 (ZMII_SSR);
- if (speed == 100)
+ if ( (speed == 100) || (speed == 1000) )
out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
else
out32 (ZMII_SSR,
@@ -619,8 +652,9 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K;
/* set speed */
- /* TBS: do 1GbE */
- if (speed == _100BASET)
+ if (speed == _1000BASET)
+ mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST;
+ else if (speed == _100BASET)
mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST;
else
mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index 7a7575b268..df6cb73fa3 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -101,9 +101,14 @@
#define AMD_CMD_WRITE 0xA0
#define AMD_CMD_ERASE_START 0x80
#define AMD_CMD_ERASE_SECTOR 0x30
+#define AMD_CMD_UNLOCK_START 0xAA
+#define AMD_CMD_UNLOCK_ACK 0x55
#define AMD_STATUS_TOGGLE 0x40
#define AMD_STATUS_ERROR 0x20
+#define AMD_ADDR_ERASE_START 0x555
+#define AMD_ADDR_START 0x555
+#define AMD_ADDR_ACK 0x2AA
#define FLASH_OFFSET_CFI 0x55
#define FLASH_OFFSET_CFI_RESP 0x10
@@ -377,7 +382,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
flash_unlock_seq (info, sect);
- flash_write_cmd (info, sect, 0x555, AMD_CMD_ERASE_START);
+ flash_write_cmd (info, sect, AMD_ADDR_ERASE_START,
+ AMD_CMD_ERASE_START);
flash_unlock_seq (info, sect);
flash_write_cmd (info, sect, 0, AMD_CMD_ERASE_SECTOR);
break;
@@ -479,24 +485,6 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
#ifdef CFG_FLASH_USE_BUFFER_WRITE
int buffered_size;
#endif
- int x8mode = 0;
-
- /* special handling of 16 bit devices in 8 bit mode */
- if ((info->interface == FLASH_CFI_X8X16)
- && (info->chipwidth == FLASH_CFI_BY8)) {
- switch (info->vendor) {
- case CFI_CMDSET_INTEL_STANDARD:
- case CFI_CMDSET_INTEL_EXTENDED:
- x8mode = info->portwidth;
- info->portwidth >>= 1; /* XXX - Need to test on x9/x16 in parallel. */
- /*info->portwidth = FLASH_CFI_8BIT; */ /* XXX - Need to test on x9/x16 in parallel. */
- break;
- case CFI_CMDSET_AMD_STANDARD:
- case CFI_CMDSET_AMD_EXTENDED:
- default:
- break;
- }
- }
/* get lower aligned address */
/* get lower aligned address */
wp = (addr & ~(info->portwidth - 1));
@@ -560,10 +548,6 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
flash_add_byte (info, &cword, (*(uchar *) cp));
}
- /* special handling of 16 bit devices in 8 bit mode */
- if (x8mode) {
- info->portwidth = x8mode;;
- }
return flash_write_cfiword (info, wp, cword);
}
@@ -847,8 +831,8 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
{
- flash_write_cmd (info, sect, 0x555, 0xAA);
- flash_write_cmd (info, sect, 0x2AA, 0x55);
+ flash_write_cmd (info, sect, AMD_ADDR_START, AMD_CMD_UNLOCK_START);
+ flash_write_cmd (info, sect, AMD_ADDR_ACK, AMD_CMD_UNLOCK_ACK);
}
/*-----------------------------------------------------------------------
@@ -1078,6 +1062,9 @@ static ulong flash_get_size (ulong base, int banknum)
tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT);
info->write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT))) / 1000;
info->flash_id = FLASH_MAN_CFI;
+ if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) {
+ info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */
+ }
}
flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
@@ -1131,7 +1118,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
case CFI_CMDSET_AMD_EXTENDED:
case CFI_CMDSET_AMD_STANDARD:
flash_unlock_seq (info, 0);
- flash_write_cmd (info, 0, 0x555, AMD_CMD_WRITE);
+ flash_write_cmd (info, 0, AMD_ADDR_START, AMD_CMD_WRITE);
break;
}
@@ -1182,6 +1169,10 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
int retcode;
volatile cfiptr_t src;
volatile cfiptr_t dst;
+ /* buffered writes in the AMD chip set is not supported yet */
+ if((info->vendor == CFI_CMDSET_AMD_STANDARD) ||
+ (info->vendor == CFI_CMDSET_AMD_EXTENDED))
+ return ERR_INVAL;
src.cp = cp;
dst.cp = (uchar *) dest;
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 6f1e57cbc9..6025ad5c30 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -535,6 +535,10 @@ static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
char s_name[14], l_name[256];
l_name[0] = '\0';
+ if (dentptr->name[0] == DELETED_FLAG) {
+ dentptr++;
+ continue;
+ }
if ((dentptr->attr & ATTR_VOLUME)) {
#ifdef CONFIG_SUPPORT_VFAT
if ((dentptr->attr & ATTR_VFAT) &&
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
new file mode 100644
index 0000000000..eefb8a6ece
--- /dev/null
+++ b/include/configs/gcplus.h
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * 2003-2004 (c) MontaVista Software, Inc.
+ *
+ * Configuation settings for the ADS GraphicsClient+ board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
+ * We don't actually init RAM in this case since we're using U-Boot as
+ * an secondary boot loader during Linux kernel development and testing,
+ * e.g. bootp/tftp download of the kernel is a far more convenient
+ * when testing new kernels on this target. However the ADS GCPlus Linux
+ * boot ROM leaves the MMU enabled when it passes control to U-Boot. So
+ * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem.
+ */
+#define CONFIG_INIT_CRITICAL
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
+#define CONFIG_GCPLUS 1 /* on an ADS GCPlus Board */
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size rsrvd for initial data */
+
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
+#define CONFIG_LAN91C96_BASE 0x100e0000
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on ADS GCPlus */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 38400
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp"
+#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
+#define CFG_AUTOLOAD "n" /* No autoload */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "ADS GCPlus # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0xc0000000 /* default load address */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x0a /* set core clock to 206MHz */
+
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+#define PHYS_SDRAM_2 0xc8000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */
+
+
+#define PHYS_FLASH_1 0x08000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
+#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#if 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+#else
+/* REVISIT: This doesn't work on ADS GCPlus just yet:
+#define CFG_FLASH_CFI 1 /* flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */
+#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
+#define CFG_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
+//#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#endif
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) /* Addr of Environment Sector */
+#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index 7d232ca3c3..e512f912a9 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -94,12 +94,9 @@
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \
- root=/dev/nfs rw nfsroot=157.87.82.48:\
- /home/a0875451/mwd/myfs/target ip=dhcp"
-#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */
-#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */
-#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
-#define CONFIG_BOOTFILE "uImage" /* file to load */
+ root=/dev/nfs ip=dhcp"
+#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
+#define CFG_AUTOLOAD "n" /* No autoload */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
diff --git a/include/miiphy.h b/include/miiphy.h
index 672baf9f40..7f61cfa4e3 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -53,6 +53,7 @@ int miiphy_link(unsigned char addr);
/* phy seed setup */
#define AUTO 99
+#define _1000BASET 1000
#define _100BASET 100
#define _10BASET 10
#define HALF 22
@@ -67,6 +68,9 @@ int miiphy_link(unsigned char addr);
#define PHY_ANLPAR 0x05
#define PHY_ANER 0x06
#define PHY_ANNPTR 0x07
+#define PHY_ANLPNP 0x08
+#define PHY_1000BTCR 0x09
+#define PHY_1000BTSR 0x0A
#define PHY_PHYSTS 0x10
#define PHY_MIPSCR 0x11
#define PHY_MIPGSR 0x12
@@ -113,4 +117,13 @@ int miiphy_link(unsigned char addr);
#define PHY_ANLPAR_10FD 0x0040
#define PHY_ANLPAR_10 0x0020
#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
+
+/* PHY_1000BTSR */
+#define PHY_1000BTSR_MSCF 0x8000
+#define PHY_1000BTSR_MSCR 0x4000
+#define PHY_1000BTSR_LRS 0x2000
+#define PHY_1000BTSR_RRS 0x1000
+#define PHY_1000BTSR_1000FD 0x0800
+#define PHY_1000BTSR_1000HD 0x0400
+
#endif