diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 9d24f029b3..ec3405e967 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -132,15 +132,6 @@ config ARCH_MPC8308 select MPC83XX_PCIE1_SUPPORT select MPC83XX_SECOND_I2C -config ARCH_MPC8309 - bool - select ARCH_MPC830X - select MPC83XX_QUICC_ENGINE - select MPC83XX_PCI_SUPPORT - select MPC83XX_SECOND_I2C - select SYS_FSL_ERRATUM_ESDHC111 - select FSL_ELBC - config ARCH_MPC831X bool select MPC83XX_PCI_SUPPORT diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig index 71fa73801a..b67ccd661d 100644 --- a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig @@ -160,10 +160,6 @@ config QUICC_VCO_DIVIDER_2 config QUICC_VCO_DIVIDER_4 bool "4" -config QUICC_VCO_DIVIDER_8 - depends on ARCH_MPC8309 - bool "8" - endchoice choice @@ -399,14 +395,6 @@ config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM depends on ARCH_MPC837X bool "PCI2" -config BOOT_ROM_INTERFACE_ESDHC - depends on ARCH_MPC8309 - bool "eSDHC" - -config BOOT_ROM_INTERFACE_SPI - depends on ARCH_MPC8309 - bool "SPI" - config BOOT_ROM_INTERFACE_GPCM_8BIT bool "Local bus GPCM - 8-bit ROM" @@ -623,8 +611,6 @@ config BOOT_ROM_INTERFACE hex default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM default 0x4 if BOOT_ROM_INTERFACE_PCI1 - default 0x8 if BOOT_ROM_INTERFACE_ESDHC - default 0xc if BOOT_ROM_INTERFACE_SPI default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM default 0x14 if BOOT_ROM_INTERFACE_GPCM_8BIT default 0x18 if BOOT_ROM_INTERFACE_GPCM_16BIT @@ -676,12 +662,8 @@ config LDP_PIN_MUX_STATE config QUICC_VCO_DIVIDER int default 0 if !MPC83XX_QUICC_ENGINE - default 0 if QUICC_VCO_DIVIDER_2 && ARCH_MPC8309 - default 1 if QUICC_VCO_DIVIDER_4 && ARCH_MPC8309 - default 2 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8309 default 2 if QUICC_VCO_DIVIDER_2 && (ARCH_MPC832X || ARCH_MPC8360) default 0 if QUICC_VCO_DIVIDER_4 && (ARCH_MPC832X || ARCH_MPC8360) - default 1 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8360 config QUICC_DIV_FACTOR int diff --git a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr index e6b6130de2..86c5f42dd3 100644 --- a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr +++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr @@ -1,6 +1,6 @@ menu "LCRR - Clock Ratio Register register" -if !ARCH_MPC8309 && !ARCH_MPC831X && !ARCH_MPC832X +if !ARCH_MPC831X && !ARCH_MPC832X choice prompt "DLL bypass" diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index f835263f25..b7a87fec2f 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -93,8 +93,6 @@ int get_clocks(void) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; -#elif defined(CONFIG_ARCH_MPC8309) - u32 usbdr_clk; #endif #ifdef CONFIG_ARCH_MPC834X u32 usbmph_clk; @@ -107,9 +105,7 @@ int get_clocks(void) #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif -#if !defined(CONFIG_ARCH_MPC8309) u32 enc_clk; -#endif u32 lbiu_clk; u32 lclk_clk; u32 mem_clk; @@ -252,7 +248,6 @@ int get_clocks(void) return -6; } #endif -#if !defined(CONFIG_ARCH_MPC8309) switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { case 0: enc_clk = 0; @@ -270,7 +265,6 @@ int get_clocks(void) /* unknown SCCR_ENCCM value */ return -7; } -#endif #if defined(CONFIG_FSL_ESDHC) switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) { @@ -304,8 +298,6 @@ int get_clocks(void) i2c1_clk = sdhc_clk; #elif defined(CONFIG_ARCH_MPC837X) i2c1_clk = enc_clk; -#elif defined(CONFIG_ARCH_MPC8309) - i2c1_clk = csb_clk; #endif #if !defined(CONFIG_ARCH_MPC832X) i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ @@ -434,8 +426,6 @@ int get_clocks(void) gd->arch.tsec1_clk = tsec1_clk; gd->arch.tsec2_clk = tsec2_clk; gd->arch.usbdr_clk = usbdr_clk; -#elif defined(CONFIG_ARCH_MPC8309) - gd->arch.usbdr_clk = usbdr_clk; #endif #if defined(CONFIG_ARCH_MPC834X) gd->arch.usbmph_clk = usbmph_clk; @@ -448,9 +438,7 @@ int get_clocks(void) #if !defined(CONFIG_ARCH_MPC832X) gd->arch.i2c2_clk = i2c2_clk; #endif -#if !defined(CONFIG_ARCH_MPC8309) gd->arch.enc_clk = enc_clk; -#endif gd->arch.lbiu_clk = lbiu_clk; gd->arch.lclk_clk = lclk_clk; gd->mem_clk = mem_clk; @@ -524,10 +512,8 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc, printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->arch.mem_sec_clk)); #endif -#if !defined(CONFIG_ARCH_MPC8309) printf(" SEC: %-4s MHz\n", strmhz(buf, gd->arch.enc_clk)); -#endif printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->arch.i2c1_clk)); #if !defined(CONFIG_ARCH_MPC832X) @@ -546,9 +532,6 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc, strmhz(buf, gd->arch.tsec2_clk)); printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->arch.usbdr_clk)); -#elif defined(CONFIG_ARCH_MPC8309) - printf(" USB DR: %-4s MHz\n", - strmhz(buf, gd->arch.usbdr_clk)); #endif #if defined(CONFIG_ARCH_MPC834X) printf(" USB MPH: %-4s MHz\n", diff --git a/arch/powerpc/dts/km8309-uboot.dtsi b/arch/powerpc/dts/km8309-uboot.dtsi deleted file mode 100644 index a93bdb2d00..0000000000 --- a/arch/powerpc/dts/km8309-uboot.dtsi +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Hitachi Power Grids 8309 U-Boot specific Device Tree Source parts - * - * Copyright (C) 2020 Heiko Schocher - * - */ - -/ { - cpus { - u-boot,dm-pre-reloc; - PowerPC,8309@0 { - u-boot,dm-pre-reloc; - }; - }; - - chosen { - stdout-path = &serial0; - }; -}; - -&qe { - compatible = "fsl,qe", "simple-bus"; -}; - -&soc { - u-boot,dm-pre-reloc; -}; - -&serial0 { - clock-frequency = <132000000>; - u-boot,dm-pre-reloc; -}; diff --git a/arch/powerpc/dts/kmtegr1.dts b/arch/powerpc/dts/kmtegr1.dts deleted file mode 100644 index d40d9716e5..0000000000 --- a/arch/powerpc/dts/kmtegr1.dts +++ /dev/null @@ -1,392 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Hitachi Power Grids TEGR1 Device Tree Source - * - * Copyright (C) 2020 Heiko Schocher - * - */ - -/dts-v1/; - -/ { - model = "KMTEGR1"; - compatible = "hitachi,kmpbec8309"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet_zynq; - ethernet1 = &enet_piggy2; - serial0 = &serial0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8309@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <16384>; // L1, 16K - i-cache-size = <16384>; // L1, 16K - timebase-frequency = <66000000>; - bus-frequency = <264000000>; - clock-frequency = <264000000>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - soc: soc8309@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <264000000>; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl,mpc8313-i2c","fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - clock-frequency = <400000>; - - mux@70 { - compatible = "nxp,pca9547"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - /* - * Inventory EEPROM of the - * unit itself - */ - ivm@50 { - label = "MAIN_CTRL"; - compatible = "dummy"; - reg = <0x50>; - }; - }; - - i2c@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - /* Temperature sensors */ - temp@48 { - label = "front"; - compatible = "national,lm75"; - reg = <0x48>; - }; - - temp@49 { - label = "board"; - compatible = "national,lm75"; - reg = <0x49>; - }; - - temp@4a { - label = "power"; - compatible = "national,lm75"; - reg = <0x4a>; - }; - - temp@4b { - label = "bottom"; - compatible = "national,lm75"; - reg = <0x4b>; - }; - }; - - i2c@6 { - reg = <6>; - #address-cells = <1>; - #size-cells = <0>; - - }; - - i2c@5 { - reg = <5>; - #address-cells = <1>; - #size-cells = <0>; - - }; - - i2c@7 { - reg = <7>; - #address-cells = <1>; - #size-cells = <0>; - - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <264000000>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8309-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8309-dma-channel", - "fsl,elo-dma-channel"; - reg = <0 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8309-dma-channel", - "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8309-dma-channel", - "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8309-dma-channel", - "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - ipic: pic@700 { - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "fsl,pq2pro-pic", "fsl,ipic"; - interrupt-controller; - reg = <0x700 0x100>; - device_type = "ipic"; - }; - - gpio1: gpio-controller@c00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio"; - reg = <0xc00 0x100>; - interrupts = <75 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio-controller@d00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio"; - reg = <0xd00 0x100>; - interrupts = <75 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - spi@7000 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x7000 0x1000>; - interrupts = <16 0x8>; - interrupt-parent = <&ipic>; - mode = "cpu"; - #address-cells = <1>; - #size-cells = <0>; - - /* GPIO_15 chipselect for ZYNQ flash */ - gpios = <&gpio1 15 0>; - - zynq_flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,m25p80"; - reg = <0>; - spi-max-frequency = <4000000>; - m25p,fast-read; - partition@0 { - label = "bootloader"; - reg = <0x0 0x01000000>; - }; - }; - }; - }; - - qe: qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0100000 0x00100000>; - reg = <0xe0100000 0x480>; - brg-frequency = <0>; - bus-frequency = <396000000>; - fsl,qe-num-snums = <32>; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x00010000 0x00004000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x4000>; - }; - }; - - /* ZYNQ (UCC1, MDIO 0x10, MII) */ - enet_zynq: ethernet@2000 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; - local-mac-address = [ 00 00 00 00 00 00 ]; - /*id=0, full-dup, 100M, no-pause, no-asym_p*/ - fixed-link = <0 1 100 0 0>; - rx-clock-name = "clk9"; - tx-clock-name = "clk10"; - phy-connection-type = "mii"; - }; - - /* Piggy2 (UCC3, MDIO 0x00, RMII) */ - enet_piggy2: ucc@2200 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <3>; - reg = <0x2200 0x200>; - interrupts = <34>; - interrupt-parent = <&qeic>; - local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock-name = "none"; - tx-clock-name = "clk12"; - phy-handle = <&phy_piggy2>; - phy-connection-type = "rmii"; - }; - - mdio@2320 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2320 0x38>; - compatible = "fsl,ucc-mdio"; - - /* Piggy2 (UCC3, MDIO 0x00, RMII) */ - phy_piggy2: ethernet-phy@0 { - reg = <0x0>; - device_type = "ethernet-phy"; - }; - - /* Explicitly set the tbi-phy to a non-zero address - * so that it does not conflict with phy_piggy2 that - * is unfortunately at address 0 - */ - tbi1: tbi-phy@1 { - reg = <0x1>; - device_type = "tbi-phy"; - }; - }; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - big-endian; - interrupts = <32 8 33 8>; - interrupt-parent = <&ipic>; - }; - bootcount@0x13ff8 { - device_type = "bootcount"; - compatible = "u-boot,bootcount"; - reg = <0x13ff8 0x08>; - }; - - }; - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8309-localbus", "fsl,pq2pro-localbus", - "simple-bus"; - reg = <0xe0005000 0xd8>; - ranges = <0 0 0xf0000000 0x04000000 - 1 0 0xe8000000 0x01000000 - 2 0 0xe0000000 0x10000000 - 3 0 0xb0000000 0x10000000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0x00000000 0x04000000>; - bank-width = <2>; - nornand = "nor"; - #address-cells = <1>; - #size-cells = <1>; - use-advanced-sector-protection; - partition@0 { /* 768KB */ - label = "u-boot"; - reg = <0 0xc0000>; - }; - partition@c0000 { /* 256KB */ - label = "qe-fw"; - reg = <0xc0000 0x40000>; - }; - partition@100000 { /* 128KB */ - label = "env"; - reg = <0x100000 0x20000>; - }; - partition@120000 { /* 128KB */ - label = "envred"; - reg = <0x120000 0x20000>; - }; - partition@140000 { /* 64256KB */ - label = "ubi0"; - reg = <0x140000 0x3EC0000>; - }; - }; - }; -}; - -#include "km8309-uboot.dtsi" diff --git a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h index b740675183..19c2506c9b 100644 --- a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h +++ b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h @@ -8,8 +8,7 @@ */ #if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308) #define MPC83XX_GPIO_CTRLRS 1 -#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) || \ - defined(CONFIG_ARCH_MPC8309) +#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) #define MPC83XX_GPIO_CTRLRS 2 #else #define MPC83XX_GPIO_CTRLRS 0 diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 770adcd30f..6709e692e6 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -32,8 +32,6 @@ struct arch_global_data { u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; -# elif defined(CONFIG_ARCH_MPC8309) - u32 usbdr_clk; # endif # if defined(CONFIG_ARCH_MPC834X) u32 usbmph_clk; diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 6d1ddbcd27..c7313472de 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -64,14 +64,7 @@ typedef struct sysconf83xx { #else u32 pecr2; /* PCI Express control register 2 */ #endif -#if defined(CONFIG_ARCH_MPC8309) - u32 can_dbg_ctrl; - u32 res9a; - u32 gpr1; - u8 res9b[0xAC]; -#else u8 res9[0xB8]; -#endif } sysconf83xx_t; /* @@ -604,11 +597,7 @@ typedef struct serdes83xx { * On Chip ROM */ typedef struct rom83xx { -#if defined(CONFIG_ARCH_MPC8309) - u8 mem[0x8000]; -#else u8 mem[0x10000]; -#endif } rom83xx_t; /* @@ -857,55 +846,6 @@ typedef struct immap { u8 res8[0xC0000]; u8 qe[0x100000]; /* QE block */ } immap_t; -#elif defined(CONFIG_ARCH_MPC8309) -typedef struct immap { - sysconf83xx_t sysconf; /* System configuration */ - wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ - rtclk83xx_t rtc; /* Real Time Clock Module Registers */ - rtclk83xx_t pit; /* Periodic Interval Timer */ - gtm83xx_t gtm[2]; /* Global Timers Module */ - ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ - arbiter83xx_t arbiter; /* System Arbiter Registers */ - reset83xx_t reset; /* Reset Module */ - clk83xx_t clk; /* System Clock Module */ - pmc83xx_t pmc; /* Power Management Control Module */ - gpio83xx_t gpio[2]; /* General purpose I/O module */ - u8 res0[0x500]; /* res0 1.25 KBytes added for 8309 */ - qepi83xx_t qepi; /* QE Ports Interrupts Registers */ - qepio83xx_t qepio; /* QE Parallel I/O ports */ - u8 res1[0x800]; - ddr83xx_t ddr; /* DDR Memory Controller Memory */ - fsl_i2c_t i2c[2]; /* I2C Controllers */ - u8 res2[0x1300]; - duart83xx_t duart[2]; /* DUART */ - u8 res3[0x200]; - duart83xx_t duart1[2]; /* DUART */ - u8 res4[0x500]; - fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ - u8 res5[0x1000]; - spi8xxx_t spi; /* Serial Peripheral Interface */ - dma83xx_t dma; /* DMA */ - pciconf83xx_t pci_conf[1]; /* PCI Configuration Registers */ - u8 res7[0x80]; - ios83xx_t ios; /* Sequencer (IOS) */ - pcictrl83xx_t pci_ctrl[1]; /* PCI Control & Status Registers */ - u8 res8[0x13A00]; - u8 can1[0x1000]; /* Flexcan 1 */ - u8 can2[0x1000]; /* Flexcan 2 */ - u8 res9[0x5000]; - usb83xx_t usb; - u8 res10[0x5000]; - u8 can3[0x1000]; /* Flexcan 3 */ - u8 can4[0x1000]; /* Flexcan 4 */ - u8 res11[0x1000]; - u8 dma1[0x2000]; /* DMA */ - sdhc83xx_t sdhc; /* SDHC Controller */ - u8 res12[0xC1000]; - rom83xx_t rom; /* On Chip ROM */ - u8 res13[0x8000]; - u8 qe[0x100000]; /* QE block */ - u8 res14[0xE00000];/* Added for 8309 */ -} immap_t; #endif struct ccsr_gpio { diff --git a/arch/powerpc/include/asm/mpc8xxx_spi.h b/arch/powerpc/include/asm/mpc8xxx_spi.h index f2210a14ae..83cfe23b4e 100644 --- a/arch/powerpc/include/asm/mpc8xxx_spi.h +++ b/arch/powerpc/include/asm/mpc8xxx_spi.h @@ -11,7 +11,6 @@ #include #if defined(CONFIG_ARCH_MPC8308) || \ - defined(CONFIG_ARCH_MPC8309) || \ defined(CONFIG_ARCH_MPC8313) || \ defined(CONFIG_ARCH_MPC834X) || \ defined(CONFIG_ARCH_MPC837X) diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig index 8247ae39d3..ef3c62b9de 100644 --- a/board/keymile/km83xx/Kconfig +++ b/board/keymile/km83xx/Kconfig @@ -61,25 +61,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy endif -if TARGET_KMTEGR1 - -config SYS_BOARD - default "km83xx" - -config SYS_VENDOR - default "keymile" - -config SYS_CONFIG_NAME - default "kmtegr1" - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select ARCH_MPC8309 - imply CMD_CRAMFS - imply FS_CRAMFS - -endif - if TARGET_TUXX1 config SYS_BOARD diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS index 9fd5a8500d..ac1f8cbd88 100644 --- a/board/keymile/km83xx/MAINTAINERS +++ b/board/keymile/km83xx/MAINTAINERS @@ -10,10 +10,8 @@ F: include/configs/tuxx1.h F: configs/kmopti2_defconfig F: configs/kmsupx5_defconfig F: configs/kmtepr2_defconfig -F: configs/kmtegr1_defconfig F: configs/tuge1_defconfig F: configs/tuxx1_defconfig -F: arch/powerpc/dts/km8309-uboot.dtsi F: arch/powerpc/dts/km8321-uboot.dtsi F: arch/powerpc/dts/km8321.dtsi F: arch/powerpc/dts/km836x-uboot.dtsi @@ -25,7 +23,6 @@ F: arch/powerpc/dts/kmeter1.dts F: arch/powerpc/dts/kmopti2.dts F: arch/powerpc/dts/kmsupc5.dts F: arch/powerpc/dts/kmsupm5.dts -F: arch/powerpc/dts/kmtegr1.dts F: arch/powerpc/dts/kmtepr2.dts F: arch/powerpc/dts/kmtuge1.dts F: arch/powerpc/dts/kmtuxa1.dts diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig deleted file mode 100644 index 7c0ebefa69..0000000000 --- a/configs/kmtegr1_defconfig +++ /dev/null @@ -1,201 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xF0000000 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="kmtegr1" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_SYS_CLK_FREQ=66000000 -CONFIG_SYS_LOAD_ADDR=0x100000 -CONFIG_ENV_ADDR=0xF0100000 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_KMTEGR1=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_QUICC_MULT_FACTOR_3=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="SDRAM" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_INHIBITED=y -CONFIG_BAT0_ICACHE_GUARDED=y -CONFIG_BAT0_DCACHE_INHIBITED=y -CONFIG_BAT0_DCACHE_GUARDED=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_4_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="KMBEC_FPGA" -CONFIG_BAT2_BASE=0xE8000000 -CONFIG_BAT2_LENGTH_128_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="FLASH" -CONFIG_BAT3_BASE=0xF0000000 -CONFIG_BAT3_LENGTH_256_MBYTES=y -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT3_DCACHE_INHIBITED=y -CONFIG_BAT3_DCACHE_GUARDED=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_BAT4=y -CONFIG_BAT4_NAME="STACK_IN_DCACHE" -CONFIG_BAT4_BASE=0xE6000000 -CONFIG_BAT4_ACCESS_RW=y -CONFIG_BAT4_USER_MODE_VALID=y -CONFIG_BAT4_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="APP2" -CONFIG_BAT6_BASE=0xB0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_DCACHE_INHIBITED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xF0000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_256_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE8000000 -CONFIG_LBLAW1_NAME="KMBEC_FPGA" -CONFIG_LBLAW1_LENGTH_128_MBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xB0000000 -CONFIG_LBLAW3_NAME="APP2" -CONFIG_LBLAW3_LENGTH_256_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xF0000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_256_MBYTES=y -CONFIG_OR0_SCY_5=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="KMBEC_FPGA" -CONFIG_BR1_OR1_BASE=0xE8000000 -CONFIG_OR1_AM_128_MBYTES=y -CONFIG_OR1_SCY_2=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR1_TRLX_RELAXED=y -CONFIG_OR1_EAD_EXTRA=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="APP2" -CONFIG_BR3_OR3_BASE=0xB0000000 -CONFIG_BR3_PORTSIZE_16BIT=y -CONFIG_OR3_AM_256_MBYTES=y -CONFIG_OR3_SCY_5=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_ACR_APARK_MASTER=y -CONFIG_ACR_PARKM_USB_I2C1_BOOT=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_83XX_PCICLK=0x3ef1480 -CONFIG_KM_DEF_NETDEV="eth1" -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_DHCP=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=boot,nand0=app" -CONFIG_MTDPARTS_DEFAULT="mtdparts=boot:768k(u-boot),256k(qe-fw),128k(env),128k(envred),-(ubi0);app:-(ubi1);" -CONFIG_CMD_DIAG=y -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR_REDUND=0xF0120000 -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="UEC0" -CONFIG_VERSION_VARIABLE=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DM_BOOTCOUNT=y -CONFIG_BOOTCOUNT_MEM=y -CONFIG_SYS_BOOTCOUNT_BE=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xF0001001 -CONFIG_SYS_OR0_PRELIM=0xF0000E55 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE8000801 -CONFIG_SYS_OR1_PRELIM=0xF8000E25 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xB0001001 -CONFIG_SYS_OR3_PRELIM=0xF0000050 -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_FSL_I2C_OFFSET=0x3000 -CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y -CONFIG_SYS_FSL_I2C2_OFFSET=0x3100 -CONFIG_SYS_I2C_SLAVE=0x7F -CONFIG_SYS_I2C_SPEED=200000 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_FIXED=y -CONFIG_DM_ETH_PHY=y -CONFIG_QE_UEC=y -# CONFIG_PCI is not set -# CONFIG_PINCTRL_FULL is not set -CONFIG_QE=y -CONFIG_SYS_QE_FW_ADDR=0xF00C0000 -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_BCH=y diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index bd0a10c9d2..8342c3389c 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -119,12 +119,10 @@ static void qe_sdma_init(void) */ static u8 thread_snum[] = { /* Evthreads 16-29 are not supported in MPC8309 */ -#if !defined(CONFIG_ARCH_MPC8309) 0x04, 0x05, 0x0c, 0x0d, 0x14, 0x15, 0x1c, 0x1d, 0x24, 0x25, 0x2c, 0x2d, 0x34, 0x35, -#endif 0x88, 0x89, 0x98, 0x99, 0xa8, 0xa9, 0xb8, 0xb9, 0xc8, 0xc9, 0xd8, 0xd9, diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h deleted file mode 100644 index 0468ed5e83..0000000000 --- a/include/configs/km/km-mpc8309.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * High Level Configuration Options - */ - -#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" - -/* QE microcode/firmware address */ -/* between the u-boot partition and env */ - -/* - * System IO Config - */ -/* 0x14000180 SICR_1 */ -#ifndef CONFIG_SYS_SICRL -#define CONFIG_SYS_SICRL (0 \ - | SICR_1_UART1_UART1RTS \ - | SICR_1_I2C_CKSTOP \ - | SICR_1_IRQ_A_IRQ \ - | SICR_1_IRQ_B_IRQ \ - | SICR_1_GPIO_A_GPIO \ - | SICR_1_GPIO_B_GPIO \ - | SICR_1_GPIO_C_GPIO \ - | SICR_1_GPIO_D_GPIO \ - | SICR_1_GPIO_E_GPIO \ - | SICR_1_GPIO_F_GPIO \ - | SICR_1_USB_A_UART2S \ - | SICR_1_USB_B_UART2RTS \ - | SICR_1_FEC1_FEC1 \ - | SICR_1_FEC2_FEC2 \ - ) -#endif - -/* 0x00080400 SICR_2 */ -#define CONFIG_SYS_SICRH (0 \ - | SICR_2_FEC3_FEC3 \ - | SICR_2_HDLC1_A_HDLC1 \ - | SICR_2_ELBC_A_LA \ - | SICR_2_ELBC_B_LCLK \ - | SICR_2_HDLC2_A_HDLC2 \ - | SICR_2_USB_D_GPIO \ - | SICR_2_PCI_PCI \ - | SICR_2_HDLC1_B_HDLC1 \ - | SICR_2_HDLC1_C_HDLC1 \ - | SICR_2_HDLC2_B_GPIO \ - | SICR_2_HDLC2_C_HDLC2 \ - | SICR_2_QUIESCE_B \ - ) - -/* GPR_1 */ -#define CONFIG_SYS_GPR1 0x50008060 - -#define CONFIG_SYS_DDRCDR (\ - DDRCDR_EN | \ - DDRCDR_PZ_MAXZ | \ - DDRCDR_NZ_MAXZ | \ - DDRCDR_M_ODR) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_32_BE | \ - SDRAM_CFG_SREN | \ - SDRAM_CFG_HSE) - -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ODT_RD_NEVER | \ - CSCONFIG_ODT_WR_ONLY_CURRENT | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) - -#define CONFIG_SYS_DDR_MODE 0x47860242 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (3 << TIMING_CFG1_WRREC_SHIFT) | \ - (7 << TIMING_CFG1_REFREC_SHIFT) | \ - (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (3 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 - -/* EEprom support */ - -/* ethernet port connected to piggy (UEC2) */ -#define CONFIG_UEC_ETH2 -#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ -#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 -#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 0 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h deleted file mode 100644 index bdd35cc7fb..0000000000 --- a/include/configs/kmtegr1.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov - * - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_HOSTNAME "kmtegr1" -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" - -#define CONFIG_NAND_ECC_BCH -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 - -#define CONFIG_SYS_SICRL (0 \ - | SICR_1_UART1_UART1RTS \ - | SICR_1_I2C_CKSTOP \ - | SICR_1_IRQ_A_IRQ \ - | SICR_1_IRQ_B_IRQ \ - | SICR_1_GPIO_A_GPIO \ - | SICR_1_GPIO_B_GPIO \ - | SICR_1_GPIO_C_GPIO \ - | SICR_1_GPIO_D_GPIO \ - | SICR_1_GPIO_E_LCS \ - | SICR_1_GPIO_F_GPIO \ - | SICR_1_USB_A_UART2S \ - | SICR_1_USB_B_UART2RTS \ - | SICR_1_FEC1_FEC1 \ - | SICR_1_FEC2_FEC2 \ - ) - -/* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" -#include "km/km-mpc83xx.h" -#include "km/km-mpc8309.h" - -/* must be after the include because KMBEC_FPGA is otherwise undefined */ -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ - -#endif /* __CONFIG_H */ diff --git a/include/linux/immap_qe.h b/include/linux/immap_qe.h index 022771fff5..45307f51c1 100644 --- a/include/linux/immap_qe.h +++ b/include/linux/immap_qe.h @@ -16,7 +16,7 @@ #define QE_MURAM_SIZE 0xc000UL #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 -#elif defined(CONFIG_ARCH_MPC832X) || defined(CONFIG_ARCH_MPC8309) +#elif defined(CONFIG_ARCH_MPC832X) #define QE_MURAM_SIZE 0x4000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 2181a90b59..5926c8090a 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -340,85 +340,6 @@ #define SICRH_TSOBI2_V3P3 (0 << 0) #define SICRH_TSOBI2_V2P5 (1 << 0) -#elif defined(CONFIG_ARCH_MPC8309) -/* SICR_1 */ -#define SICR_1_UART1_UART1S (0 << (30-2)) -#define SICR_1_UART1_UART1RTS (1 << (30-2)) -#define SICR_1_I2C_I2C (0 << (30-4)) -#define SICR_1_I2C_CKSTOP (1 << (30-4)) -#define SICR_1_IRQ_A_IRQ (0 << (30-6)) -#define SICR_1_IRQ_A_MCP (1 << (30-6)) -#define SICR_1_IRQ_B_IRQ (0 << (30-8)) -#define SICR_1_IRQ_B_CKSTOP (1 << (30-8)) -#define SICR_1_GPIO_A_GPIO (0 << (30-10)) -#define SICR_1_GPIO_A_SD (2 << (30-10)) -#define SICR_1_GPIO_A_DDR (3 << (30-10)) -#define SICR_1_GPIO_B_GPIO (0 << (30-12)) -#define SICR_1_GPIO_B_SD (2 << (30-12)) -#define SICR_1_GPIO_B_QE (3 << (30-12)) -#define SICR_1_GPIO_C_GPIO (0 << (30-14)) -#define SICR_1_GPIO_C_CAN (1 << (30-14)) -#define SICR_1_GPIO_C_DDR (2 << (30-14)) -#define SICR_1_GPIO_C_LCS (3 << (30-14)) -#define SICR_1_GPIO_D_GPIO (0 << (30-16)) -#define SICR_1_GPIO_D_CAN (1 << (30-16)) -#define SICR_1_GPIO_D_DDR (2 << (30-16)) -#define SICR_1_GPIO_D_LCS (3 << (30-16)) -#define SICR_1_GPIO_E_GPIO (0 << (30-18)) -#define SICR_1_GPIO_E_CAN (1 << (30-18)) -#define SICR_1_GPIO_E_DDR (2 << (30-18)) -#define SICR_1_GPIO_E_LCS (3 << (30-18)) -#define SICR_1_GPIO_F_GPIO (0 << (30-20)) -#define SICR_1_GPIO_F_CAN (1 << (30-20)) -#define SICR_1_GPIO_F_CK (2 << (30-20)) -#define SICR_1_USB_A_USBDR (0 << (30-22)) -#define SICR_1_USB_A_UART2S (1 << (30-22)) -#define SICR_1_USB_B_USBDR (0 << (30-24)) -#define SICR_1_USB_B_UART2S (1 << (30-24)) -#define SICR_1_USB_B_UART2RTS (2 << (30-24)) -#define SICR_1_USB_C_USBDR (0 << (30-26)) -#define SICR_1_USB_C_QE_EXT (3 << (30-26)) -#define SICR_1_FEC1_FEC1 (0 << (30-28)) -#define SICR_1_FEC1_GTM (1 << (30-28)) -#define SICR_1_FEC1_GPIO (2 << (30-28)) -#define SICR_1_FEC2_FEC2 (0 << (30-30)) -#define SICR_1_FEC2_GTM (1 << (30-30)) -#define SICR_1_FEC2_GPIO (2 << (30-30)) -/* SICR_2 */ -#define SICR_2_FEC3_FEC3 (0 << (30-0)) -#define SICR_2_FEC3_TMR (1 << (30-0)) -#define SICR_2_FEC3_GPIO (2 << (30-0)) -#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2)) -#define SICR_2_HDLC1_A_GPIO (1 << (30-2)) -#define SICR_2_HDLC1_A_TDM1 (2 << (30-2)) -#define SICR_2_ELBC_A_LA (0 << (30-4)) -#define SICR_2_ELBC_B_LCLK (0 << (30-6)) -#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8)) -#define SICR_2_HDLC2_A_GPIO (0 << (30-8)) -#define SICR_2_HDLC2_A_TDM2 (0 << (30-8)) -/* bits 10-11 unused */ -#define SICR_2_USB_D_USBDR (0 << (30-12)) -#define SICR_2_USB_D_GPIO (2 << (30-12)) -#define SICR_2_USB_D_QE_BRG (3 << (30-12)) -#define SICR_2_PCI_PCI (0 << (30-14)) -#define SICR_2_PCI_CPCI_HS (2 << (30-14)) -#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16)) -#define SICR_2_HDLC1_B_GPIO (1 << (30-16)) -#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16)) -#define SICR_2_HDLC1_B_TDM1 (3 << (30-16)) -#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18)) -#define SICR_2_HDLC1_C_GPIO (1 << (30-18)) -#define SICR_2_HDLC1_C_TDM1 (2 << (30-18)) -#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20)) -#define SICR_2_HDLC2_B_GPIO (1 << (30-20)) -#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20)) -#define SICR_2_HDLC2_B_TDM2 (3 << (30-20)) -#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22)) -#define SICR_2_HDLC2_C_GPIO (1 << (30-22)) -#define SICR_2_HDLC2_C_TDM2 (2 << (30-22)) -#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22)) -#define SICR_2_QUIESCE_B (0 << (30-24)) - #endif /* @@ -610,63 +531,6 @@ #define HRCWL_SVCOD_DIV_8 0x10000000 #define HRCWL_SVCOD_DIV_2 0x20000000 #define HRCWL_SVCOD_DIV_1 0x30000000 -#elif defined(CONFIG_ARCH_MPC8309) - -#define HRCWL_CEVCOD 0x000000C0 -#define HRCWL_CEVCOD_SHIFT 6 -/* - * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012 - * these are different than with 8360, 832x - */ -#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000 -#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040 -#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080 - -#define HRCWL_CEPDF 0x00000020 -#define HRCWL_CEPDF_SHIFT 5 -#define HRCWL_CE_PLL_DIV_1X1 0x00000000 -#define HRCWL_CE_PLL_DIV_2X1 0x00000020 - -#define HRCWL_CEPMF 0x0000001F -#define HRCWL_CEPMF_SHIFT 0 -#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 -#define HRCWL_CE_TO_PLL_1X2 0x00000002 -#define HRCWL_CE_TO_PLL_1X3 0x00000003 -#define HRCWL_CE_TO_PLL_1X4 0x00000004 -#define HRCWL_CE_TO_PLL_1X5 0x00000005 -#define HRCWL_CE_TO_PLL_1X6 0x00000006 -#define HRCWL_CE_TO_PLL_1X7 0x00000007 -#define HRCWL_CE_TO_PLL_1X8 0x00000008 -#define HRCWL_CE_TO_PLL_1X9 0x00000009 -#define HRCWL_CE_TO_PLL_1X10 0x0000000A -#define HRCWL_CE_TO_PLL_1X11 0x0000000B -#define HRCWL_CE_TO_PLL_1X12 0x0000000C -#define HRCWL_CE_TO_PLL_1X13 0x0000000D -#define HRCWL_CE_TO_PLL_1X14 0x0000000E -#define HRCWL_CE_TO_PLL_1X15 0x0000000F -#define HRCWL_CE_TO_PLL_1X16 0x00000010 -#define HRCWL_CE_TO_PLL_1X17 0x00000011 -#define HRCWL_CE_TO_PLL_1X18 0x00000012 -#define HRCWL_CE_TO_PLL_1X19 0x00000013 -#define HRCWL_CE_TO_PLL_1X20 0x00000014 -#define HRCWL_CE_TO_PLL_1X21 0x00000015 -#define HRCWL_CE_TO_PLL_1X22 0x00000016 -#define HRCWL_CE_TO_PLL_1X23 0x00000017 -#define HRCWL_CE_TO_PLL_1X24 0x00000018 -#define HRCWL_CE_TO_PLL_1X25 0x00000019 -#define HRCWL_CE_TO_PLL_1X26 0x0000001A -#define HRCWL_CE_TO_PLL_1X27 0x0000001B -#define HRCWL_CE_TO_PLL_1X28 0x0000001C -#define HRCWL_CE_TO_PLL_1X29 0x0000001D -#define HRCWL_CE_TO_PLL_1X30 0x0000001E -#define HRCWL_CE_TO_PLL_1X31 0x0000001F - -#define HRCWL_SVCOD 0x30000000 -#define HRCWL_SVCOD_SHIFT 28 -#define HRCWL_SVCOD_DIV_2 0x00000000 -#define HRCWL_SVCOD_DIV_4 0x10000000 -#define HRCWL_SVCOD_DIV_8 0x20000000 -#define HRCWL_SVCOD_DIV_1 0x30000000 #endif /* @@ -1027,21 +891,6 @@ #define SCCR_SATACM_1 0x00000055 #define SCCR_SATACM_2 0x000000aa #define SCCR_SATACM_3 0x000000ff -#elif defined(CONFIG_ARCH_MPC8309) -/* SCCR bits - MPC8309 specific */ -#define SCCR_SDHCCM 0x0c000000 -#define SCCR_SDHCCM_SHIFT 26 -#define SCCR_SDHCCM_0 0x00000000 -#define SCCR_SDHCCM_1 0x04000000 -#define SCCR_SDHCCM_2 0x08000000 -#define SCCR_SDHCCM_3 0x0c000000 - -#define SCCR_USBDRCM 0x00c00000 -#define SCCR_USBDRCM_SHIFT 22 -#define SCCR_USBDRCM_0 0x00000000 -#define SCCR_USBDRCM_1 0x00400000 -#define SCCR_USBDRCM_2 0x00800000 -#define SCCR_USBDRCM_3 0x00c00000 #endif #define SCCR_PCIEXP1CM 0x00300000