Merge branch 'master' of git://git.denx.de/u-boot-mmc

2014-01-09 11:05:32 -05:00 · 2014-01-09 11:05:32 -05:00 · 8401bfa91e
commit 8401bfa91e
parent 33d413fc91 c5c1af2176
13 changed files with 289 additions and 26 deletions
--- a/arch/arm/include/asm/arch-socfpga/dwmmc.h
+++ b/arch/arm/include/asm/arch-socfpga/dwmmc.h
@ -0,0 +1,12 @@
+/*
+ * (C) Copyright 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_SOCFPGA_DWMMC_H_
+#define	_SOCFPGA_DWMMC_H_
+
+extern int socfpga_dwmmc_init(u32 regbase, int bus_width, int index);
+
+#endif /* _SOCFPGA_SDMMC_H_ */
--- a/arch/arm/include/asm/arch-socfpga/system_manager.h
+++ b/arch/arm/include/asm/arch-socfpga/system_manager.h
@ -19,4 +19,69 @@ extern unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM];

 #define CONFIG_SYSMGR_PINMUXGRP_OFFSET	(0x400)

+#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel)	\
+	((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
+
+struct socfpga_system_manager {
+	u32	siliconid1;
+	u32	siliconid2;
+	u32	_pad_0x8_0xf[2];
+	u32	wddbg;
+	u32	bootinfo;
+	u32	hpsinfo;
+	u32	parityinj;
+	u32	fpgaintfgrp_gbl;
+	u32	fpgaintfgrp_indiv;
+	u32	fpgaintfgrp_module;
+	u32	_pad_0x2c_0x2f;
+	u32	scanmgrgrp_ctrl;
+	u32	_pad_0x34_0x3f[3];
+	u32	frzctrl_vioctrl;
+	u32	_pad_0x44_0x4f[3];
+	u32	frzctrl_hioctrl;
+	u32	frzctrl_src;
+	u32	frzctrl_hwctrl;
+	u32	_pad_0x5c_0x5f;
+	u32	emacgrp_ctrl;
+	u32	emacgrp_l3master;
+	u32	_pad_0x68_0x6f[2];
+	u32	dmagrp_ctrl;
+	u32	dmagrp_persecurity;
+	u32	_pad_0x78_0x7f[2];
+	u32	iswgrp_handoff[8];
+	u32	_pad_0xa0_0xbf[8];
+	u32	romcodegrp_ctrl;
+	u32	romcodegrp_cpu1startaddr;
+	u32	romcodegrp_initswstate;
+	u32	romcodegrp_initswlastld;
+	u32	romcodegrp_bootromswstate;
+	u32	__pad_0xd4_0xdf[3];
+	u32	romcodegrp_warmramgrp_enable;
+	u32	romcodegrp_warmramgrp_datastart;
+	u32	romcodegrp_warmramgrp_length;
+	u32	romcodegrp_warmramgrp_execution;
+	u32	romcodegrp_warmramgrp_crc;
+	u32	__pad_0xf4_0xff[3];
+	u32	romhwgrp_ctrl;
+	u32	_pad_0x104_0x107;
+	u32	sdmmcgrp_ctrl;
+	u32	sdmmcgrp_l3master;
+	u32	nandgrp_bootstrap;
+	u32	nandgrp_l3master;
+	u32	usbgrp_l3master;
+	u32	_pad_0x11c_0x13f[9];
+	u32	eccgrp_l2;
+	u32	eccgrp_ocram;
+	u32	eccgrp_usb0;
+	u32	eccgrp_usb1;
+	u32	eccgrp_emac0;
+	u32	eccgrp_emac1;
+	u32	eccgrp_dma;
+	u32	eccgrp_can0;
+	u32	eccgrp_can1;
+	u32	eccgrp_nand;
+	u32	eccgrp_qspi;
+	u32	eccgrp_sdmmc;
+};
+
 #endif /* _SYSTEM_MANAGER_H_ */
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@ -340,6 +340,28 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		}
 #endif /* CONFIG_SUPPORT_EMMC_BOOT */
 	}
+
+	else if (argc == 3 && strcmp(argv[1], "setdsr") == 0) {
+		struct mmc *mmc = find_mmc_device(curr_device);
+		u32 val = simple_strtoul(argv[2], NULL, 16);
+		int ret;
+
+		if (!mmc) {
+			printf("no mmc device at slot %x\n", curr_device);
+			return 1;
+		}
+		ret = mmc_set_dsr(mmc, val);
+		printf("set dsr %s\n", (!ret) ? "OK, force rescan" : "ERROR");
+		if (!ret) {
+			mmc->has_init = 0;
+			if (mmc_init(mmc))
+				return 1;
+			else
+				return 0;
+		}
+		return ret;
+	}
+
 	state = MMC_INVALID;
 	if (argc == 5 && strcmp(argv[1], "read") == 0)
 		state = MMC_READ;
@ -423,5 +445,6 @@ U_BOOT_CMD(
 	"mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
 	" - change sizes of boot and RPMB partitions of specified device\n"
 #endif
+	"mmc setdsr - set DSR register value\n"
 	);
 #endif /* !CONFIG_GENERIC_MMC */
--- a/doc/README.socfpga
+++ b/doc/README.socfpga
@ -0,0 +1,53 @@
+
+--------------------------------------------
+SOCFPGA Documentation for U-Boot and SPL
+--------------------------------------------
+
+This README is about U-Boot and SPL support for Altera's ARM Cortex-A9MPCore
+based SOCFPGA. To know more about the hardware itself, please refer to
+www.altera.com.
+
+
+--------------------------------------------
+socfpga_dw_mmc
+--------------------------------------------
+Here are macro and detailed configuration required to enable DesignWare SDMMC
+controller support within SOCFPGA
+
+#define CONFIG_MMC
+-> To enable the SD MMC framework support
+
+#define CONFIG_SDMMC_BASE		(SOCFPGA_SDMMC_ADDRESS)
+-> The base address of CSR register for DesignWare SDMMC controller
+
+#define CONFIG_GENERIC_MMC
+-> Enable the generic MMC driver
+
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT	256
+-> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM
+
+#define CONFIG_DWMMC
+-> Enable the common DesignWare SDMMC controller framework
+
+#define CONFIG_SOCFPGA_DWMMC
+-> Enable the SOCFPGA specific driver for DesignWare SDMMC controller
+
+#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH		1024
+-> The FIFO depth for SOCFPGA DesignWare SDMMC controller
+
+#define CONFIG_SOCFPGA_DWMMC_DRVSEL	3
+-> Phase-shifted clock of sdmmc_clk for controller to drive command and data to
+the card to meet hold time requirements. SD clock is running at 50MHz and
+drvsel is set to shift 135 degrees (3 * 45 degrees). With that, the hold time
+is 135 / 360 * 20ns = 7.5ns.
+
+#define CONFIG_SOCFPGA_DWMMC_SMPSEL	0
+-> Phase-shifted clock of sdmmc_clk used to sample the command and data from
+the card
+
+#define CONFIG_SOCFPGA_DWMMC_BUS_WIDTH	4
+-> Bus width of data line which either 1, 4 or 8 and based on board routing.
+
+#define CONFIG_SOCFPGA_DWMMC_BUS_HZ	50000000
+-> The clock rate to controller. Do note the controller have a wrapper which
+divide the clock from PLL by 4.
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@ -28,6 +28,7 @@ obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
 obj-$(CONFIG_DWMMC) += dw_mmc.o
 obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
 obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
 else
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@ -6,6 +6,7 @@
 * SPDX-License-Identifier:	GPL-2.0+
 */

+#include <bouncebuf.h>
 #include <common.h>
 #include <malloc.h>
 #include <mmc.h>
@ -41,11 +42,13 @@ static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
 }

 static void dwmci_prepare_data(struct dwmci_host *host,
-		struct mmc_data *data, struct dwmci_idmac *cur_idmac)
+			       struct mmc_data *data,
+			       struct dwmci_idmac *cur_idmac,
+			       void *bounce_buffer)
 {
 	unsigned long ctrl;
 	unsigned int i = 0, flags, cnt, blk_cnt;
-	ulong data_start, data_end, start_addr;
+	ulong data_start, data_end;


 	blk_cnt = data->blocks;
@ -55,11 +58,6 @@ static void dwmci_prepare_data(struct dwmci_host *host,
 	data_start = (ulong)cur_idmac;
 	dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);

-	if (data->flags == MMC_DATA_READ)
-		start_addr = (unsigned int)data->dest;
-	else
-		start_addr = (unsigned int)data->src;
-
 	do {
 		flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
 		flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
@ -70,7 +68,7 @@ static void dwmci_prepare_data(struct dwmci_host *host,
 			cnt = data->blocksize * 8;

 		dwmci_set_idma_desc(cur_idmac, flags, cnt,
-				start_addr + (i * PAGE_SIZE));
+				    (u32)bounce_buffer + (i * PAGE_SIZE));

 		if (blk_cnt <= 8)
 			break;
@ -117,6 +115,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	u32 retry = 10000;
 	u32 mask, ctrl;
 	ulong start = get_timer(0);
+	struct bounce_buffer bbstate;

 	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
 		if (get_timer(start) > timeout) {
@ -127,8 +126,19 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,

 	dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);

-	if (data)
-		dwmci_prepare_data(host, data, cur_idmac);
+	if (data) {
+		if (data->flags == MMC_DATA_READ) {
+			bounce_buffer_start(&bbstate, (void*)data->dest,
+					    data->blocksize *
+					    data->blocks, GEN_BB_WRITE);
+		} else {
+			bounce_buffer_start(&bbstate, (void*)data->src,
+					    data->blocksize *
+					    data->blocks, GEN_BB_READ);
+		}
+		dwmci_prepare_data(host, data, cur_idmac,
+				   bbstate.bounce_buffer);
+	}

 	dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);

@ -204,6 +214,8 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 		ctrl = dwmci_readl(host, DWMCI_CTRL);
 		ctrl &= ~(DWMCI_DMA_EN);
 		dwmci_writel(host, DWMCI_CTRL, ctrl);
+
+		bounce_buffer_stop(&bbstate);
 	}

 	udelay(100);
@ -336,9 +348,9 @@ int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
 	struct mmc *mmc;
 	int err = 0;

-	mmc = malloc(sizeof(struct mmc));
+	mmc = calloc(sizeof(struct mmc), 1);
 	if (!mmc) {
-		printf("mmc malloc fail!\n");
+		printf("mmc calloc fail!\n");
 		return -1;
 	}

--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@ -877,6 +877,7 @@ static int mmc_startup(struct mmc *mmc)

 	mmc->tran_speed = freq * mult;

+	mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
 	mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);

 	if (IS_SD(mmc))
@ -907,6 +908,14 @@ static int mmc_startup(struct mmc *mmc)
 	if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
 		mmc->write_bl_len = MMC_MAX_BLOCK_LEN;

+	if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
+		cmd.cmdidx = MMC_CMD_SET_DSR;
+		cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
+		cmd.resp_type = MMC_RSP_NONE;
+		if (mmc_send_cmd(mmc, &cmd, NULL))
+			printf("MMC: SET_DSR failed\n");
+	}
+
 	/* Select the card, and put it into Transfer Mode */
 	if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
 		cmd.cmdidx = MMC_CMD_SELECT_CARD;
@ -1163,6 +1172,9 @@ static int mmc_send_if_cond(struct mmc *mmc)

 int mmc_register(struct mmc *mmc)
 {
+	/* Setup dsr related values */
+	mmc->dsr_imp = 0;
+	mmc->dsr = 0xffffffff;
 	/* Setup the universal parts of the block interface just once */
 	mmc->block_dev.if_type = IF_TYPE_MMC;
 	mmc->block_dev.dev = cur_dev_num++;
@ -1280,6 +1292,12 @@ int mmc_init(struct mmc *mmc)
 	return err;
 }

+int mmc_set_dsr(struct mmc *mmc, u16 val)
+{
+	mmc->dsr = val;
+	return 0;
+}
+
 /*
 * CPU and board-specific MMC initializations.  Aliased function
 * signals caller to move on
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@ -24,7 +24,8 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 	sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
 	while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
 		if (timeout == 0) {
-			printf("Reset 0x%x never completed.\n", (int)mask);
+			printf("%s: Reset 0x%x never completed.\n",
+			       __func__, (int)mask);
 			return;
 		}
 		timeout--;
@ -79,7 +80,8 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
 	do {
 		stat = sdhci_readl(host, SDHCI_INT_STATUS);
 		if (stat & SDHCI_INT_ERROR) {
-			printf("Error detected in status(0x%X)!\n", stat);
+			printf("%s: Error detected in status(0x%X)!\n",
+			       __func__, stat);
 			return -1;
 		}
 		if (stat & rdy) {
@ -102,7 +104,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
 		if (timeout-- > 0)
 			udelay(10);
 		else {
-			printf("Transfer data timeout\n");
+			printf("%s: Transfer data timeout\n", __func__);
 			return -1;
 		}
 	} while (!(stat & SDHCI_INT_DATA_END));
@ -147,7 +149,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,

 	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
 		if (time >= cmd_timeout) {
-			printf("MMC: %d busy ", mmc_dev);
+			printf("%s: MMC: %d busy ", __func__, mmc_dev);
 			if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
 				cmd_timeout += cmd_timeout;
 				printf("timeout increasing to: %u ms.\n",
@ -179,7 +181,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 	if (data)
 		flags |= SDHCI_CMD_DATA;

-	/*Set Transfer mode regarding to data flag*/
+	/* Set Transfer mode regarding to data flag */
 	if (data != 0) {
 		sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
 		mode = SDHCI_TRNS_BLK_CNT_EN;
@ -230,7 +232,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 		if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
 			return 0;
 		else {
-			printf("Timeout for status update!\n");
+			printf("%s: Timeout for status update!\n", __func__);
 			return TIMEOUT;
 		}
 	}
@ -307,7 +309,8 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
 		& SDHCI_CLOCK_INT_STABLE)) {
 		if (timeout == 0) {
-			printf("Internal clock never stabilised.\n");
+			printf("%s: Internal clock never stabilised.\n",
+			       __func__);
 			return -1;
 		}
 		timeout--;
@ -397,7 +400,8 @@ int sdhci_init(struct mmc *mmc)
 	if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
 		aligned_buffer = memalign(8, 512*1024);
 		if (!aligned_buffer) {
-			printf("Aligned buffer alloc failed!!!");
+			printf("%s: Aligned buffer alloc failed!!!\n",
+			       __func__);
 			return -1;
 		}
 	}
@ -418,8 +422,8 @@ int sdhci_init(struct mmc *mmc)
 	}

 	/* Enable only interrupts served by the SD controller */
-	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK
-		     , SDHCI_INT_ENABLE);
+	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
+		     SDHCI_INT_ENABLE);
 	/* Mask all sdhci interrupt sources */
 	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);

@ -433,7 +437,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)

 	mmc = malloc(sizeof(struct mmc));
 	if (!mmc) {
-		printf("mmc malloc fail!\n");
+		printf("%s: mmc malloc fail!\n", __func__);
 		return -1;
 	}

@ -450,7 +454,8 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
 #ifdef CONFIG_MMC_SDMA
 	if (!(caps & SDHCI_CAN_DO_SDMA)) {
-		printf("Your controller don't support sdma!!\n");
+		printf("%s: Your controller doesn't support SDMA!!\n",
+		       __func__);
 		return -1;
 	}
 #endif
@ -467,7 +472,8 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 		mmc->f_max *= 1000000;
 	}
 	if (mmc->f_max == 0) {
-		printf("Hardware doesn't specify base clock frequency\n");
+		printf("%s: Hardware doesn't specify base clock frequency\n",
+		       __func__);
 		return -1;
 	}
 	if (min_clk)
--- a/drivers/mmc/socfpga_dw_mmc.c
+++ b/drivers/mmc/socfpga_dw_mmc.c
@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <dwmmc.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/system_manager.h>
+
+static const struct socfpga_clock_manager *clock_manager_base =
+		(void *)SOCFPGA_CLKMGR_ADDRESS;
+static const struct socfpga_system_manager *system_manager_base =
+		(void *)SOCFPGA_SYSMGR_ADDRESS;
+
+static char *SOCFPGA_NAME = "SOCFPGA DWMMC";
+
+static void socfpga_dwmci_clksel(struct dwmci_host *host)
+{
+	unsigned int drvsel;
+	unsigned int smplsel;
+
+	/* Disable SDMMC clock. */
+	clrbits_le32(&clock_manager_base->per_pll_en,
+		CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK);
+
+	/* Configures drv_sel and smpl_sel */
+	drvsel = CONFIG_SOCFPGA_DWMMC_DRVSEL;
+	smplsel = CONFIG_SOCFPGA_DWMMC_SMPSEL;
+
+	debug("%s: drvsel %d smplsel %d\n", __func__, drvsel, smplsel);
+	writel(SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel),
+		&system_manager_base->sdmmcgrp_ctrl);
+
+	debug("%s: SYSMGR_SDMMCGRP_CTRL_REG = 0x%x\n", __func__,
+		readl(&system_manager_base->sdmmcgrp_ctrl));
+
+	/* Enable SDMMC clock */
+	setbits_le32(&clock_manager_base->per_pll_en,
+		CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK);
+}
+
+int socfpga_dwmmc_init(u32 regbase, int bus_width, int index)
+{
+	struct dwmci_host *host = NULL;
+	host = calloc(sizeof(struct dwmci_host), 1);
+	if (!host) {
+		printf("dwmci_host calloc fail!\n");
+		return -1;
+	}
+
+	host->name = SOCFPGA_NAME;
+	host->ioaddr = (void *)regbase;
+	host->buswidth = bus_width;
+	host->clksel = socfpga_dwmci_clksel;
+	host->dev_index = index;
+	/* fixed clock divide by 4 which due to the SDMMC wrapper */
+	host->bus_hz = CONFIG_SOCFPGA_DWMMC_BUS_HZ;
+	host->fifoth_val = MSIZE(0x2) |
+		RX_WMARK(CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH / 2 - 1) |
+		TX_WMARK(CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH / 2);
+
+	return add_dwmci(host, host->bus_hz, 400000);
+}
+
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@ -85,6 +85,7 @@
 #define CONFIG_DWMMC
 #define CONFIG_EXYNOS_DWMMC
 #define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER


 #define CONFIG_BOARD_EARLY_INIT_F
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@ -102,6 +102,7 @@
 #define CONFIG_DWMMC
 #define CONFIG_EXYNOS_DWMMC
 #define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER


 #define CONFIG_BOARD_EARLY_INIT_F
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@ -36,6 +36,7 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT

 /* Required support for the TCA642X GPIO we have on the uEVM */
 #define CONFIG_TCA642X
--- a/include/mmc.h
+++ b/include/mmc.h
@ -262,6 +262,8 @@ struct mmc {
 	uint card_caps;
 	uint host_caps;
 	uint ocr;
+	uint dsr;
+	uint dsr_imp;
 	uint scr[2];
 	uint csd[4];
 	uint cid[4];
@ -304,7 +306,7 @@ int board_mmc_getcd(struct mmc *mmc);
 int mmc_switch_part(int dev_num, unsigned int part_num);
 int mmc_getcd(struct mmc *mmc);
 int mmc_getwp(struct mmc *mmc);
-void spl_mmc_load(void) __noreturn;
+int mmc_set_dsr(struct mmc *mmc, u16 val);
 /* Function to change the size of boot partition and rpmb partitions */
 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
 					unsigned long rpmbsize);