Merge with /home/hs/U-Boot/u-boot-dev

CHANGELOG

@@ -1,6 +1,19 @@
 ======================================================================
 Changes since U-Boot 1.1.4:
 ======================================================================
+* Fix dbau1x00 Board
+  - Fix dbau1x00 boards broken by dbau1550 patch
+    PLL:s were not set for boards other than 1550.
+    Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
+    Default boot is now bootp for cards other than 1550.
+  Patch by Thomas Lange Aug 10 2005
+
+* Fixes common/cmd_flash.c:
+
+   - fix some compiler/parser error, if using m68k tool chain
+   - optical fix for protect on/off all messages, if using more
+     then one bank
+  Patch by Jens Scharsig, 28 July 2005
 
 * Fix Quad UART mapping on MCC200 board due to new HW revision
 

board/dbau1x00/lowlevel_init.S

@@ -185,6 +185,8 @@ tlbloop:
 	bne	t0, t2, tlbloop
 	nop
 
+#endif /* CONFIG_DBAU1550 */
+
 	/* First setup pll:s to make serial work ok */
 	/* We have a 12 MHz crystal */
 	li	t0, SYS_CPUPLL
@@ -205,6 +207,7 @@ tlbloop:
 	sw	t1, 0(t0) /* aux pll */
 	sync
 
+#ifdef CONFIG_DBAU1550
 	/*  Static memory controller */
 	/* RCE0 - can not change while fetching, do so from icache */
 	move		t2, ra /* Store return address */
@@ -237,7 +240,7 @@ noCacheJump:
 	sw	t1, 0(t0)
 #else /* CONFIG_DBAU1550 */
 	li	t0, MEM_STTIME0
-	li	t1, 0x00014C0F
+	li	t1, 0x040181D7
 	sw	t1, 0(t0)
 
 	/* RCE0 AMD 29LV640M MirrorBit Flash */

common/cmd_flash.c

@@ -125,13 +125,16 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
 static int
 addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
 {
-	char len_used = 0; /* indicates if the "start +length" form used */
 	char *ep;
+	char len_used; /* indicates if the "start +length" form used */
+	char found;
+	ulong bank;
 
 	*addr_first = simple_strtoul(arg1, &ep, 16);
 	if (ep == arg1 || *ep != '\0')
 		return -1;
 
+	len_used = 0;
 	if (arg2 && *arg2 == '+'){
 		len_used = 1;
 		++arg2;
@@ -142,9 +145,6 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
 		return -1;
 
 	if (len_used){
-		char found = 0;
-		ulong bank;
-
 		/*
 		 * *addr_last has the length, compute correct *addr_last
 		 * XXX watch out for the integer overflow! Right now it is
@@ -159,6 +159,7 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
 		 */
 
 		/* find the end addr of the sector where the *addr_last is */
+		found = 0;
 		for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){
 			int i;
 			flash_info_t *info = &flash_info[bank];
@@ -506,12 +507,10 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				info->protect[i] = p;
 #endif	/* CFG_FLASH_PROTECTION */
 			}
-		}
-
 #if defined(CFG_FLASH_PROTECTION)
-		if (!rcode) puts (" done\n");
+			if (!rcode) puts (" done\n");
 #endif	/* CFG_FLASH_PROTECTION */
-
+		}
 		return rcode;
 	}
 

include/configs/dbau1x00.h

@@ -81,8 +81,7 @@
 				   CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \
 				   CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C))
 #else /* CONFIG_DBAU1550 */
-/* Boot from Compact flash partition 2 as default */
-#define CONFIG_BOOTCOMMAND	"ide reset;disk 0x81000000 0:2;bootm"
+#define CONFIG_BOOTCOMMAND	"bootp;bootm"
 
 #define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \
 				 ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
@@ -133,8 +132,6 @@
 #define PHYS_FLASH_1		0xb8000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0xbc000000 /* Flash Bank #2 */
 
-#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
-
 #else /* CONFIG_DBAU1550 */
 
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
@@ -145,6 +142,8 @@
 
 #endif /* CONFIG_DBAU1550 */
 
+#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
+
 #define CFG_FLASH_CFI           1
 #define CFG_FLASH_CFI_DRIVER    1