leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

SPEAr: Place ethaddr write and read within CONFIG_CMD_NET

Browse Source 
ethaddr can be optionally read from i2c memory. So, chip_config command supports
reading/writing hw mac id into i2c memory. Placing this code within
CONFIG_CMD_NET as this would only be needed when network interface is configured

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Vipin KUMAR 2012-05-07 13:06:41 +05:30 committed by Albert ARIBAUD
parent 70fdbefc6c
commit 8026b1e42f
2 changed files with 29 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
board/spear/common/spr_misc.c
View File

@ -36,6 +36,10 @@
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_NET)
static int i2c_read_mac(uchar *buffer);
#endif
int dram_init(void)
{
/* Store complete RAM size and return */
@ -136,6 +140,7 @@ int spear_board_init(ulong mach_type)
return 0;
}
#if defined(CONFIG_CMD_NET)
static int i2c_read_mac(uchar *buffer)
{
u8 buf[2];
@ -172,17 +177,18 @@ static int write_mac(uchar *mac)
return 0;
}
puts("I2C EEPROM writing failed \n");
puts("I2C EEPROM writing failed\n");
return -1;
}
#endif
int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
void (*sram_setfreq) (unsigned int, unsigned int);
unsigned int frequency;
#if defined(CONFIG_CMD_NET)
unsigned char mac[6];
unsigned int reg, frequency;
char *s, *e;
char i2c_mac[20];
#endif
if ((argc > 3) || (argc < 2))
return cmd_usage(cmdtp);
@ -207,9 +213,12 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
return 0;
#if defined(CONFIG_CMD_NET)
} else if (!strcmp(argv[1], "ethaddr")) {
s = argv[2];
u32 reg;
char *e, *s = argv[2];
for (reg = 0; reg < 6; ++reg) {
mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
if (s)
@ -218,14 +227,15 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
write_mac(mac);
return 0;
#endif
} else if (!strcmp(argv[1], "print")) {
#if defined(CONFIG_CMD_NET)
if (!i2c_read_mac(mac)) {
sprintf(i2c_mac, "%pM", mac);
printf("Ethaddr (from i2c mem) = %s\n", i2c_mac);
printf("Ethaddr (from i2c mem) = %pM\n", mac);
} else {
printf("Ethaddr (from i2c mem) = Not set\n");
}
#endif
return 0;
}
@ -235,4 +245,7 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
"configure chip",
"chip_config cpufreq/ddrfreq frequency\n"
#if defined(CONFIG_CMD_NET)
"chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
#endif
"chip_config print");

8
doc/README.spear
View File

@ -46,3 +46,11 @@ Further options
make FLASH=PNOR (supported by SPEAr310 and SPEAr320)
- This option generates a uboot image that supports emi controller for
CFI compliant parallel NOR flash
Mac id storage and retrieval in spear platforms
Please read doc/README.enetaddr for the implementation guidelines for mac id
usage. Basically, environment has precedence over board specific storage. The
ethaddr beeing used for the network interface is always taken only from
environment variables. Although, we can check the mac id programmed in i2c
memory by using chip_config command