rockchip: Add support for MiQi rk3288 board
MiQi is rk3288 based development board with 1 or 2 GB SDRAM, 16 GB eMMC, micro SD card interface, 4 USB 2.0 ports, HDMI, gigabit Ethernet and expansion ports. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Jernej Skrabec
Simon Glass
parent
43b5c78d8d
commit
7da8680b26
@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
||||
rk3288-evb.dtb \
|
||||
rk3288-fennec.dtb \
|
||||
rk3288-firefly.dtb \
|
||||
rk3288-miqi.dtb \
|
||||
rk3288-popmetal.dtb \
|
||||
rk3188-radxarock.dtb \
|
||||
rk3288-rock2-square.dtb \
|
||||
|
||||
46
arch/arm/dts/rk3288-miqi.dts
Normal file
46
arch/arm/dts/rk3288-miqi.dts
Normal file
@ -0,0 +1,46 @@
|
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+ X11
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3288-miqi.dtsi"
|
||||
|
||||
/ {
|
||||
model = "mqmaker MiQi";
|
||||
compatible = "mqmaker,miqi", "rockchip,rk3288";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&dmc {
|
||||
rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
|
||||
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
|
||||
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
|
||||
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
|
||||
0x5 0x0>;
|
||||
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
|
||||
0xa60 0x40 0x10 0x0>;
|
||||
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
|
||||
};
|
||||
|
||||
|
||||
&pinctrl {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
423
arch/arm/dts/rk3288-miqi.dtsi
Normal file
423
arch/arm/dts/rk3288-miqi.dtsi
Normal file
@ -0,0 +1,423 @@
|
||||
/*
|
||||
* Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+ X11
|
||||
*/
|
||||
|
||||
#include "rk3288.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x80000000>;
|
||||
};
|
||||
|
||||
ext_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "ext_gmac";
|
||||
};
|
||||
|
||||
io_domains: io-domains {
|
||||
compatible = "rockchip,rk3288-io-voltage-domain";
|
||||
rockchip,grf = <&grf>;
|
||||
|
||||
audio-supply = <&vcca_33>;
|
||||
flash0-supply = <&vcc_flash>;
|
||||
flash1-supply = <&vcc_lan>;
|
||||
gpio30-supply = <&vcc_io>;
|
||||
gpio1830-supply = <&vcc_io>;
|
||||
lcdc-supply = <&vcc_io>;
|
||||
sdcard-supply = <&vccio_sd>;
|
||||
wifi-supply = <&vcc_18>;
|
||||
};
|
||||
|
||||
|
||||
leds {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "gpio-leds";
|
||||
|
||||
work {
|
||||
u-boot,dm-pre-reloc;
|
||||
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
|
||||
label = "miqi:green:user";
|
||||
linux,default-trigger = "default-on";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_ctl>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_flash: flash-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_flash";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_host: usb-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_sd: sdmmc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_pwr>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_sys: vsys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
vqmmc-supply = <&vcc_flash>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: syr827@40 {
|
||||
compatible = "silergy,syr827";
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
reg = <0x40>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <300>;
|
||||
regulator-ramp-delay = <8000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_gpu: syr828@41 {
|
||||
compatible = "silergy,syr828";
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
reg = <0x41>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
hym8563: hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "xin32k";
|
||||
};
|
||||
|
||||
act8846: act8846@5a {
|
||||
compatible = "active-semi,act8846";
|
||||
reg = <0x5a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_vsel>;
|
||||
system-power-controller;
|
||||
|
||||
vp1-supply = <&vcc_sys>;
|
||||
vp2-supply = <&vcc_sys>;
|
||||
vp3-supply = <&vcc_sys>;
|
||||
vp4-supply = <&vcc_sys>;
|
||||
inl1-supply = <&vcc_sys>;
|
||||
inl2-supply = <&vcc_sys>;
|
||||
inl3-supply = <&vcc_20>;
|
||||
|
||||
regulators {
|
||||
vcc_ddr: REG1 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_io: REG2 {
|
||||
regulator-name = "vcc_io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_log: REG3 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_20: REG4 {
|
||||
regulator-name = "vcc_20";
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vccio_sd: REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd10_lcd: REG6 {
|
||||
regulator-name = "vdd10_lcd";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcca_18: REG7 {
|
||||
regulator-name = "vcca_18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcca_33: REG8 {
|
||||
regulator-name = "vcca_33";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_lan: REG9 {
|
||||
regulator-name = "vcc_lan";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vdd_10: REG10 {
|
||||
regulator-name = "vdd_10";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_18: REG11 {
|
||||
regulator-name = "vcc_18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc18_lcd: REG12 {
|
||||
regulator-name = "vcc18_lcd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcfg_output_high: pcfg-output-high {
|
||||
output-high;
|
||||
};
|
||||
|
||||
pcfg_output_low: pcfg-output-low {
|
||||
output-low;
|
||||
};
|
||||
|
||||
pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
|
||||
bias-pull-up;
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
act8846 {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pmic_sleep: pmic-sleep {
|
||||
rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
|
||||
pmic_vsel: pmic-vsel {
|
||||
rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac {
|
||||
phy_int: phy-int {
|
||||
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
phy_pmeb: phy-pmeb {
|
||||
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
phy_rst: phy-rst {
|
||||
rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_ctl: led-ctl {
|
||||
rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
/*
|
||||
* Default drive strength isn't enough to achieve even
|
||||
* high-speed mode on firefly board so bump up to 12ma.
|
||||
*/
|
||||
sdmmc_bus4: sdmmc-bus4 {
|
||||
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
|
||||
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
|
||||
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
|
||||
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
|
||||
};
|
||||
|
||||
sdmmc_clk: sdmmc-clk {
|
||||
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
|
||||
};
|
||||
|
||||
sdmmc_cmd: sdmmc-cmd {
|
||||
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
|
||||
};
|
||||
|
||||
sdmmc_pwr: sdmmc-pwr {
|
||||
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_host {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_18>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1 {
|
||||
vbus-supply = <&vcc_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
@ -57,6 +57,15 @@ config TARGET_FIREFLY_RK3288
|
||||
also includes on-board eMMC and 1GB of SDRAM. Expansion connectors
|
||||
provide access to display pins, I2C, SPI, UART and GPIOs.
|
||||
|
||||
config TARGET_MIQI_RK3288
|
||||
bool "MiQi-RK3288"
|
||||
select BOARD_LATE_INIT
|
||||
help
|
||||
MiQi-RK3288 is a RK3288-based development board with 4 USB 2.0
|
||||
ports, HDMI, micro-SD card, 16 GB eMMC and Gigabit Ethernet. It
|
||||
has 1 or 2 GiB SDRAM. Expansion connectors provide access to
|
||||
I2C, SPI, UART, GPIOs and fan control.
|
||||
|
||||
config TARGET_POPMETAL_RK3288
|
||||
bool "PopMetal-RK3288"
|
||||
select BOARD_LATE_INIT
|
||||
@ -118,6 +127,8 @@ source "board/firefly/firefly-rk3288/Kconfig"
|
||||
|
||||
source "board/google/veyron/Kconfig"
|
||||
|
||||
source "board/mqmaker/miqi_rk3288/Kconfig"
|
||||
|
||||
source "board/radxa/rock2/Kconfig"
|
||||
|
||||
source "board/rockchip/evb_rk3288/Kconfig"
|
||||
|
||||
15
board/mqmaker/miqi_rk3288/Kconfig
Normal file
15
board/mqmaker/miqi_rk3288/Kconfig
Normal file
@ -0,0 +1,15 @@
|
||||
if TARGET_MIQI_RK3288
|
||||
|
||||
config SYS_BOARD
|
||||
default "miqi_rk3288"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "mqmaker"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "miqi_rk3288"
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||
def_bool y
|
||||
|
||||
endif
|
||||
6
board/mqmaker/miqi_rk3288/MAINTAINERS
Normal file
6
board/mqmaker/miqi_rk3288/MAINTAINERS
Normal file
@ -0,0 +1,6 @@
|
||||
MIQI
|
||||
M: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
S: Maintained
|
||||
F: board/mqmaker/miqi_rk3288
|
||||
F: include/configs/miqi_rk3288.h
|
||||
F: configs/miqi-rk3288_defconfig
|
||||
7
board/mqmaker/miqi_rk3288/Makefile
Normal file
7
board/mqmaker/miqi_rk3288/Makefile
Normal file
@ -0,0 +1,7 @@
|
||||
#
|
||||
# (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += miqi-rk3288.o
|
||||
15
board/mqmaker/miqi_rk3288/miqi-rk3288.c
Normal file
15
board/mqmaker/miqi_rk3288/miqi-rk3288.c
Normal file
@ -0,0 +1,15 @@
|
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <spl.h>
|
||||
|
||||
void board_boot_order(u32 *spl_boot_list)
|
||||
{
|
||||
/* eMMC prior to sdcard. */
|
||||
spl_boot_list[0] = BOOT_DEVICE_MMC2;
|
||||
spl_boot_list[1] = BOOT_DEVICE_MMC1;
|
||||
}
|
||||
73
configs/miqi-rk3288_defconfig
Normal file
73
configs/miqi-rk3288_defconfig
Normal file
@ -0,0 +1,73 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_ROCKCHIP_RK3288=y
|
||||
CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y
|
||||
CONFIG_TARGET_MIQI_RK3288=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x80000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3288-miqi"
|
||||
CONFIG_SILENT_CONSOLE=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_PMIC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_SPL_ISO_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_SPL_PARTITION_UUIDS=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
# CONFIG_SPL_SIMPLE_BUS is not set
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_GMAC_ROCKCHIP=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_FULL is not set
|
||||
CONFIG_ROCKCHIP_RK3288_PINCTRL=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_ACT8846=y
|
||||
CONFIG_REGULATOR_ACT8846=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_RAM=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff690000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_ROCKCHIP_SERIAL=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_DM_VIDEO=y
|
||||
CONFIG_DISPLAY=y
|
||||
CONFIG_VIDEO_ROCKCHIP=y
|
||||
CONFIG_CONSOLE_SCROLL_LINES=10
|
||||
CONFIG_USE_TINY_PRINTF=y
|
||||
CONFIG_CMD_DHRYSTONE=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
@ -36,12 +36,13 @@ You will need:
|
||||
Building
|
||||
========
|
||||
|
||||
At present seven RK3288 boards are supported:
|
||||
At present eight RK3288 boards are supported:
|
||||
|
||||
- EVB RK3288 - use evb-rk3288 configuration
|
||||
- Fennec RK3288 - use fennec-rk3288 configuration
|
||||
- Firefly RK3288 - use firefly-rk3288 configuration
|
||||
- Hisense Chromebook - use chromebook_jerry configuration
|
||||
- MiQi RK3288 - use miqi-rk3288 configuration
|
||||
- PopMetal RK3288 - use popmetal-rk3288 configuration
|
||||
- Radxa Rock 2 - use rock2 configuration
|
||||
- Tinker RK3288 - use tinker-rk3288 configuration
|
||||
|
||||
22
include/configs/miqi_rk3288.h
Normal file
22
include/configs/miqi_rk3288.h
Normal file
@ -0,0 +1,22 @@
|
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define ROCKCHIP_DEVICE_SETTINGS \
|
||||
"stdin=serial,cros-ec-keyb\0" \
|
||||
"stdout=serial,vidconsole\0" \
|
||||
"stderr=serial,vidconsole\0"
|
||||
|
||||
#include <configs/rk3288_common.h>
|
||||
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user