leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

powerpc/km: remove unmaintained target KMVECT1

Browse Source 
Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Holger Brunck
2019-07-09 09:30:29 +02:00
committed by Stefan Roese
parent 1bd17b9f7b
commit 7b472733d8
8 changed files with 0 additions and 348 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
board/keymile/common/ivm.c
View File

@@ -310,11 +310,6 @@ static int ivm_populate_env(unsigned char *buf, int len)
/* if an offset is defined, add it */
process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true);
env_set((char *)"ethaddr", (char *)valbuf);
#ifdef CONFIG_KMVECT1
/* KMVECT1 has two ethernet interfaces */
process_mac(valbuf, page2, 1, true);
env_set((char *)"eth1addr", (char *)valbuf);
#endif
#else
/* KMTEGR1 has a special setup. eth0 has no connection to the outside and
* gets an locally administred MAC address, eth1 is the debug interface and

19
board/keymile/km83xx/Kconfig
View File

@@ -38,25 +38,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
endif
if TARGET_KMVECT1
config SYS_BOARD
default "km83xx"
config SYS_VENDOR
default "keymile"
config SYS_CONFIG_NAME
default "kmvect1"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select ARCH_MPC8309
imply CMD_CRAMFS
imply FS_CRAMFS
endif
if TARGET_KMTEGR1
config SYS_BOARD

1
board/keymile/km83xx/MAINTAINERS
View File

@@ -10,7 +10,6 @@ F: configs/kmopti2_defconfig
F: configs/kmtepr2_defconfig
F: include/configs/suvd3.h
F: configs/kmtegr1_defconfig
F: configs/kmvect1_defconfig
F: configs/suvd3_defconfig
F: configs/tuge1_defconfig
F: configs/tuxx1_defconfig

81
board/keymile/km83xx/km83xx.c
View File

@@ -124,19 +124,10 @@ static int piggy_present(void)
return in_8(&base->bprth) & PIGGY_PRESENT;
}
#if defined(CONFIG_KMVECT1)
int ethernet_present(void)
{
/* ethernet port connected to simple switch without piggy */
return 1;
}
#else
int ethernet_present(void)
{
return piggy_present();
}
#endif
int board_early_init_r(void)
{
@@ -197,80 +188,8 @@ int misc_init_r(void)
return 0;
}
#if defined(CONFIG_KMVECT1)
#include <mv88e6352.h>
/* Marvell MV88E6122 switch configuration */
static struct mv88e_sw_reg extsw_conf[] = {
/* port 1, FRONT_MDI, autoneg */
{ PORT(1), PORT_PHY, NO_SPEED_FOR },
{ PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
{ PHY(1), PHY_1000_CTRL, NO_ADV },
{ PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN },
{ PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
FULL_DUPLEX },
/* port 2, unused */
{ PORT(2), PORT_CTRL, PORT_DIS },
{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 3, BP_MII (CPU), PHY mode, 100BASE */
{ PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */
{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
{ PORT(4), PORT_PHY, SPEED_1000_FOR },
{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */
{ PORT(5), PORT_STATUS, NO_PHY_DETECT },
{ PORT(5), PORT_PHY, SPEED_1000_FOR },
{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/*
* Errata Fix: 1.9V Output from Internal 1.8V Regulator,
* acc . MV-S300889-00D.pdf , clause 4.5
*/
{ PORT(5), 0x1A, 0xADB1 },
/* port 6, unused, this port has no phy */
{ PORT(6), PORT_CTRL, PORT_DIS },
/*
* Errata Fix: 1.9V Output from Internal 1.8V Regulator,
* acc . MV-S300889-00D.pdf , clause 4.5
*/
{ PORT(5), 0x1A, 0xADB1 },
};
#endif
int last_stage_init(void)
{
#if defined(CONFIG_KMVECT1)
struct km_bec_fpga __iomem *base =
(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
u8 tmp_reg;
/* Release mv88e6122 from reset */
tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */
out_8(&base->res1[0], tmp_reg); /* GP28 as output */
tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */
out_8(&base->gprt3, tmp_reg);
/* configure MV88E6122 switch */
char *name = "UEC2";
if (miiphy_set_current_dev(name))
return 0;
mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
ARRAY_SIZE(extsw_conf));
mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
if (piggy_present()) {
env_set("ethact", "UEC2");
env_set("netdev", "eth1");
puts("using PIGGY for network boot\n");
} else {
env_set("netdev", "eth0");
puts("using frontport for network boot\n");
}
#endif
#if defined(CONFIG_TARGET_KMCOGE5NE)
struct bfticu_iomap *base =
(struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;