leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

pci: Add driver for Broadcom BCM2711 SoC PCIe controller

Browse Source 
This patch adds basic driver PCI Express controller found on Broadcom
set-top-box SoCs, e.g. BCM2711.
The code is based on Linux upstream driver (pcie-brcmstb.c) with MSI
handling removed. The inbound access memory region is not currently
parsed from dma-ranges DT property and a fixed 3GB region is used.

The patch has been tested on RPI4 board, i.e. on BCM2711 SoC with VL805
USB Host Controller.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
This commit is contained in:
Sylwester Nawrocki 2020-05-25 13:39:58 +02:00 committed by Matthias Brugger
parent db75485f5c
commit 7b1c3f6f65
3 changed files with 633 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/pci/Kconfig
View File

@ -205,4 +205,13 @@ config PCIE_ROCKCHIP
Say Y here if you want to enable PCIe controller support on
Rockchip SoCs.
config PCI_BRCMSTB
bool "Broadcom STB PCIe controller"
depends on DM_PCI
depends on ARCH_BCM283X
help
Say Y here if you want to enable support for PCIe controller
on Broadcom set-top-box (STB) SoCs.
This driver currently supports only BCM2711 SoC and RC mode
of the controller.
endif

1
drivers/pci/Makefile
View File

@ -44,3 +44,4 @@ obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o
obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o
obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o pcie_rockchip_phy.o
obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o

623
drivers/pci/pcie_brcmstb.c Normal file
View File

@ -0,0 +1,623 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Broadcom STB PCIe controller driver
*
* Copyright (C) 2020 Samsung Electronics Co., Ltd.
*
* Based on upstream Linux kernel driver:
* drivers/pci/controller/pcie-brcmstb.c
* Copyright (C) 2009 - 2017 Broadcom
*
* Based driver by Nicolas Saenz Julienne
* Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
*/
#include <common.h>
#include <errno.h>
#include <dm.h>
#include <dm/ofnode.h>
#include <pci.h>
#include <asm/io.h>
#include <linux/bitfield.h>
#include <linux/log2.h>
#include <linux/iopoll.h>
/* Offset of the mandatory PCIe capability config registers */
#define BRCM_PCIE_CAP_REGS 0x00ac
/* The PCIe controller register offsets */
#define PCIE_RC_CFG_VENDOR_SPECIFIC_REG1 0x0188
#define VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
#define VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN 0x0
#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
#define CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
#define PCIE_RC_DL_MDIO_ADDR 0x1100
#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
#define PCIE_MISC_MISC_CTRL 0x4008
#define MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
#define MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
#define MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
#define MISC_CTRL_MAX_BURST_SIZE_128 0x0
#define MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
#define PCIE_MEM_WIN0_LO(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4)
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
#define PCIE_MEM_WIN0_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4)
#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
#define RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
#define RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
#define RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
#define PCIE_MISC_PCIE_STATUS 0x4068
#define STATUS_PCIE_PORT_MASK 0x80
#define STATUS_PCIE_PORT_SHIFT 7
#define STATUS_PCIE_DL_ACTIVE_MASK 0x20
#define STATUS_PCIE_DL_ACTIVE_SHIFT 5
#define STATUS_PCIE_PHYLINKUP_MASK 0x10
#define STATUS_PCIE_PHYLINKUP_SHIFT 4
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
#define MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
#define MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
#define MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT 12
#define PCIE_MEM_WIN0_BASE_LIMIT(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
#define MEM_WIN0_BASE_HI_BASE_MASK 0xff
#define PCIE_MEM_WIN0_BASE_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
#define PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
#define PCIE_MEM_WIN0_LIMIT_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
#define PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
#define PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
#define PCIE_MSI_INTR2_CLR 0x4508
#define PCIE_MSI_INTR2_MASK_SET 0x4510
#define PCIE_EXT_CFG_DATA 0x8000
#define PCIE_EXT_CFG_INDEX 0x9000
#define PCIE_EXT_BUSNUM_SHIFT 20
#define PCIE_EXT_SLOT_SHIFT 15
#define PCIE_EXT_FUNC_SHIFT 12
#define PCIE_RGR1_SW_INIT_1 0x9210
#define RGR1_SW_INIT_1_PERST_MASK 0x1
#define RGR1_SW_INIT_1_INIT_MASK 0x2
/* PCIe parameters */
#define BRCM_NUM_PCIE_OUT_WINS 4
/* MDIO registers */
#define MDIO_PORT0 0x0
#define MDIO_DATA_MASK 0x7fffffff
#define MDIO_DATA_SHIFT 0
#define MDIO_PORT_MASK 0xf0000
#define MDIO_PORT_SHIFT 16
#define MDIO_REGAD_MASK 0xffff
#define MDIO_REGAD_SHIFT 0
#define MDIO_CMD_MASK 0xfff00000
#define MDIO_CMD_SHIFT 20
#define MDIO_CMD_READ 0x1
#define MDIO_CMD_WRITE 0x0
#define MDIO_DATA_DONE_MASK 0x80000000
#define SSC_REGS_ADDR 0x1100
#define SET_ADDR_OFFSET 0x1f
#define SSC_CNTL_OFFSET 0x2
#define SSC_CNTL_OVRD_EN_MASK 0x8000
#define SSC_CNTL_OVRD_VAL_MASK 0x4000
#define SSC_STATUS_OFFSET 0x1
#define SSC_STATUS_SSC_MASK 0x400
#define SSC_STATUS_SSC_SHIFT 10
#define SSC_STATUS_PLL_LOCK_MASK 0x800
#define SSC_STATUS_PLL_LOCK_SHIFT 11
/**
* struct brcm_pcie - the PCIe controller state
* @base: Base address of memory mapped IO registers of the controller
* @gen: Non-zero value indicates limitation of the PCIe controller operation
* to a specific generation (1, 2 or 3)
* @ssc: true indicates active Spread Spectrum Clocking operation
*/
struct brcm_pcie {
void __iomem *base;
int gen;
bool ssc;
};
/**
* brcm_pcie_encode_ibar_size() - Encode the inbound "BAR" region size
* @size: The inbound region size
*
* This function converts size of the inbound "BAR" region to the non-linear
* values of the PCIE_MISC_RC_BAR[123]_CONFIG_LO register SIZE field.
*
* Return: The encoded inbound region size
*/
static int brcm_pcie_encode_ibar_size(u64 size)
{
int log2_in = ilog2(size);
if (log2_in >= 12 && log2_in <= 15)
/* Covers 4KB to 32KB (inclusive) */
return (log2_in - 12) + 0x1c;
else if (log2_in >= 16 && log2_in <= 37)
/* Covers 64KB to 32GB, (inclusive) */
return log2_in - 15;
/* Something is awry so disable */
return 0;
}
/**
* brcm_pcie_rc_mode() - Check if PCIe controller is in RC mode
* @pcie: Pointer to the PCIe controller state
*
* The controller is capable of serving in both RC and EP roles.
*
* Return: true for RC mode, false for EP mode.
*/
static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
{
u32 val;
val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
return (val & STATUS_PCIE_PORT_MASK) >> STATUS_PCIE_PORT_SHIFT;
}
/**
* brcm_pcie_link_up() - Check whether the PCIe link is up
* @pcie: Pointer to the PCIe controller state
*
* Return: true if the link is up, false otherwise.
*/
static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
{
u32 val, dla, plu;
val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
dla = (val & STATUS_PCIE_DL_ACTIVE_MASK) >> STATUS_PCIE_DL_ACTIVE_SHIFT;
plu = (val & STATUS_PCIE_PHYLINKUP_MASK) >> STATUS_PCIE_PHYLINKUP_SHIFT;
return dla && plu;
}
static int brcm_pcie_config_address(const struct udevice *dev, pci_dev_t bdf,
uint offset, void **paddress)
{
struct brcm_pcie *pcie = dev_get_priv(dev);
unsigned int pci_bus = PCI_BUS(bdf);
unsigned int pci_dev = PCI_DEV(bdf);
unsigned int pci_func = PCI_FUNC(bdf);
int idx;
/*
* Busses 0 (host PCIe bridge) and 1 (its immediate child)
* are limited to a single device each
*/
if (pci_bus < 2 && pci_dev > 0)
return -EINVAL;
/* Accesses to the RC go right to the RC registers */
if (pci_bus == 0) {
*paddress = pcie->base + offset;
return 0;
}
/* For devices, write to the config space index register */
idx = (pci_bus << PCIE_EXT_BUSNUM_SHIFT)
| (pci_dev << PCIE_EXT_SLOT_SHIFT)
| (pci_func << PCIE_EXT_FUNC_SHIFT);
writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
*paddress = pcie->base + PCIE_EXT_CFG_DATA + offset;
return 0;
}
static int brcm_pcie_read_config(const struct udevice *bus, pci_dev_t bdf,
uint offset, ulong *valuep,
enum pci_size_t size)
{
return pci_generic_mmap_read_config(bus, brcm_pcie_config_address,
bdf, offset, valuep, size);
}
static int brcm_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
uint offset, ulong value,
enum pci_size_t size)
{
return pci_generic_mmap_write_config(bus, brcm_pcie_config_address,
bdf, offset, value, size);
}
static const char *link_speed_to_str(unsigned int cls)
{
switch (cls) {
case PCI_EXP_LNKSTA_CLS_2_5GB: return "2.5";
case PCI_EXP_LNKSTA_CLS_5_0GB: return "5.0";
case PCI_EXP_LNKSTA_CLS_8_0GB: return "8.0";
default:
break;
}
return "??";
}
static u32 brcm_pcie_mdio_form_pkt(unsigned int port, unsigned int regad,
unsigned int cmd)
{
u32 pkt;
pkt = (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK;
pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK;
pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK;
return pkt;
}
/**
* brcm_pcie_mdio_read() - Perform a register read on the internal MDIO bus
* @base: Pointer to the PCIe controller IO registers
* @port: The MDIO port number
* @regad: The register address
* @val: A pointer at which to store the read value
*
* Return: 0 on success and register value in @val, negative error value
* on failure.
*/
static int brcm_pcie_mdio_read(void __iomem *base, unsigned int port,
unsigned int regad, u32 *val)
{
u32 data, addr;
int ret;
addr = brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ);
writel(addr, base + PCIE_RC_DL_MDIO_ADDR);
readl(base + PCIE_RC_DL_MDIO_ADDR);
ret = readl_poll_timeout(base + PCIE_RC_DL_MDIO_RD_DATA, data,
(data & MDIO_DATA_DONE_MASK), 100);
*val = data & MDIO_DATA_MASK;
return ret;
}
/**
* brcm_pcie_mdio_write() - Perform a register write on the internal MDIO bus
* @base: Pointer to the PCIe controller IO registers
* @port: The MDIO port number
* @regad: Address of the register
* @wrdata: The value to write
*
* Return: 0 on success, negative error value on failure.
*/
static int brcm_pcie_mdio_write(void __iomem *base, unsigned int port,
unsigned int regad, u16 wrdata)
{
u32 data, addr;
addr = brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE);
writel(addr, base + PCIE_RC_DL_MDIO_ADDR);
readl(base + PCIE_RC_DL_MDIO_ADDR);
writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
return readl_poll_timeout(base + PCIE_RC_DL_MDIO_WR_DATA, data,
!(data & MDIO_DATA_DONE_MASK), 100);
}
/**
* brcm_pcie_set_ssc() - Configure the controller for Spread Spectrum Clocking
* @base: pointer to the PCIe controller IO registers
*
* Return: 0 on success, negative error value on failure.
*/
static int brcm_pcie_set_ssc(void __iomem *base)
{
int pll, ssc;
int ret;
u32 tmp;
ret = brcm_pcie_mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET,
SSC_REGS_ADDR);
if (ret < 0)
return ret;
ret = brcm_pcie_mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET, &tmp);
if (ret < 0)
return ret;
tmp |= (SSC_CNTL_OVRD_EN_MASK | SSC_CNTL_OVRD_VAL_MASK);
ret = brcm_pcie_mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, tmp);
if (ret < 0)
return ret;
udelay(1000);
ret = brcm_pcie_mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET, &tmp);
if (ret < 0)
return ret;
ssc = (tmp & SSC_STATUS_SSC_MASK) >> SSC_STATUS_SSC_SHIFT;
pll = (tmp & SSC_STATUS_PLL_LOCK_MASK) >> SSC_STATUS_PLL_LOCK_SHIFT;
return ssc && pll ? 0 : -EIO;
}
/**
* brcm_pcie_set_gen() - Limits operation to a specific generation (1, 2 or 3)
* @pcie: pointer to the PCIe controller state
* @gen: PCIe generation to limit the controller's operation to
*/
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, unsigned int gen)
{
void __iomem *cap_base = pcie->base + BRCM_PCIE_CAP_REGS;
u16 lnkctl2 = readw(cap_base + PCI_EXP_LNKCTL2);
u32 lnkcap = readl(cap_base + PCI_EXP_LNKCAP);
lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
writel(lnkcap, cap_base + PCI_EXP_LNKCAP);
lnkctl2 = (lnkctl2 & ~0xf) | gen;
writew(lnkctl2, cap_base + PCI_EXP_LNKCTL2);
}
static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
unsigned int win, u64 phys_addr,
u64 pcie_addr, u64 size)
{
void __iomem *base = pcie->base;
u32 phys_addr_mb_high, limit_addr_mb_high;
phys_addr_t phys_addr_mb, limit_addr_mb;
int high_addr_shift;
u32 tmp;
/* Set the base of the pcie_addr window */
writel(lower_32_bits(pcie_addr), base + PCIE_MEM_WIN0_LO(win));
writel(upper_32_bits(pcie_addr), base + PCIE_MEM_WIN0_HI(win));
/* Write the addr base & limit lower bits (in MBs) */
phys_addr_mb = phys_addr / SZ_1M;
limit_addr_mb = (phys_addr + size - 1) / SZ_1M;
tmp = readl(base + PCIE_MEM_WIN0_BASE_LIMIT(win));
u32p_replace_bits(&tmp, phys_addr_mb,
MEM_WIN0_BASE_LIMIT_BASE_MASK);
u32p_replace_bits(&tmp, limit_addr_mb,
MEM_WIN0_BASE_LIMIT_LIMIT_MASK);
writel(tmp, base + PCIE_MEM_WIN0_BASE_LIMIT(win));
/* Write the cpu & limit addr upper bits */
high_addr_shift = MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT;
phys_addr_mb_high = phys_addr_mb >> high_addr_shift;
tmp = readl(base + PCIE_MEM_WIN0_BASE_HI(win));
u32p_replace_bits(&tmp, phys_addr_mb_high,
MEM_WIN0_BASE_HI_BASE_MASK);
writel(tmp, base + PCIE_MEM_WIN0_BASE_HI(win));
limit_addr_mb_high = limit_addr_mb >> high_addr_shift;
tmp = readl(base + PCIE_MEM_WIN0_LIMIT_HI(win));
u32p_replace_bits(&tmp, limit_addr_mb_high,
PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK);
writel(tmp, base + PCIE_MEM_WIN0_LIMIT_HI(win));
}
static int brcm_pcie_probe(struct udevice *dev)
{
struct udevice *ctlr = pci_get_controller(dev);
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
struct brcm_pcie *pcie = dev_get_priv(dev);
void __iomem *base = pcie->base;
bool ssc_good = false;
int num_out_wins = 0;
u64 rc_bar2_offset, rc_bar2_size;
unsigned int scb_size_val;
int i, ret;
u16 nlw, cls, lnksta;
u32 tmp;
/*
* Reset the bridge, assert the fundamental reset. Note for some SoCs,
* e.g. BCM7278, the fundamental reset should not be asserted here.
* This will need to be changed when support for other SoCs is added.
*/
setbits_le32(base + PCIE_RGR1_SW_INIT_1,
RGR1_SW_INIT_1_INIT_MASK | RGR1_SW_INIT_1_PERST_MASK);
/*
* The delay is a safety precaution to preclude the reset signal
* from looking like a glitch.
*/
udelay(100);
/* Take the bridge out of reset */
clrbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
clrbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
/* Wait for SerDes to be stable */
udelay(100);
/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
clrsetbits_le32(base + PCIE_MISC_MISC_CTRL,
MISC_CTRL_MAX_BURST_SIZE_MASK,
MISC_CTRL_SCB_ACCESS_EN_MASK |
MISC_CTRL_CFG_READ_UR_MODE_MASK |
MISC_CTRL_MAX_BURST_SIZE_128);
/*
* TODO: When support for other SoCs than BCM2711 is added we may
* need to use the base address and size(s) provided in the dma-ranges
* property.
*/
rc_bar2_offset = 0;
rc_bar2_size = 0xc0000000;
tmp = lower_32_bits(rc_bar2_offset);
u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),
RC_BAR2_CONFIG_LO_SIZE_MASK);
writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
writel(upper_32_bits(rc_bar2_offset),
base + PCIE_MISC_RC_BAR2_CONFIG_HI);
scb_size_val = rc_bar2_size ?
ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */
tmp = readl(base + PCIE_MISC_MISC_CTRL);
u32p_replace_bits(&tmp, scb_size_val,
MISC_CTRL_SCB0_SIZE_MASK);
writel(tmp, base + PCIE_MISC_MISC_CTRL);
/* Disable the PCIe->GISB memory window (RC_BAR1) */
clrbits_le32(base + PCIE_MISC_RC_BAR1_CONFIG_LO,
RC_BAR1_CONFIG_LO_SIZE_MASK);
/* Disable the PCIe->SCB memory window (RC_BAR3) */
clrbits_le32(base + PCIE_MISC_RC_BAR3_CONFIG_LO,
RC_BAR3_CONFIG_LO_SIZE_MASK);
/* Mask all interrupts since we are not handling any yet */
writel(0xffffffff, base + PCIE_MSI_INTR2_MASK_SET);
/* Clear any interrupts we find on boot */
writel(0xffffffff, base + PCIE_MSI_INTR2_CLR);
if (pcie->gen)
brcm_pcie_set_gen(pcie, pcie->gen);
/* Unassert the fundamental reset */
clrbits_le32(pcie->base + PCIE_RGR1_SW_INIT_1,
RGR1_SW_INIT_1_PERST_MASK);
/* Give the RC/EP time to wake up, before trying to configure RC.
* Intermittently check status for link-up, up to a total of 100ms.
*/
for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5)
mdelay(5);
if (!brcm_pcie_link_up(pcie)) {
printf("PCIe BRCM: link down\n");
return -EINVAL;
}
if (!brcm_pcie_rc_mode(pcie)) {
printf("PCIe misconfigured; is in EP mode\n");
return -EINVAL;
}
for (i = 0; i < hose->region_count; i++) {
struct pci_region *reg = &hose->regions[i];
if (reg->flags != PCI_REGION_MEM)
continue;
if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS)
return -EINVAL;
brcm_pcie_set_outbound_win(pcie, num_out_wins, reg->phys_start,
reg->bus_start, reg->size);
num_out_wins++;
}
/*
* For config space accesses on the RC, show the right class for
* a PCIe-PCIe bridge (the default setting is to be EP mode).
*/
clrsetbits_le32(base + PCIE_RC_CFG_PRIV1_ID_VAL3,
CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK, 0x060400);
if (pcie->ssc) {
ret = brcm_pcie_set_ssc(pcie->base);
if (!ret)
ssc_good = true;
else
printf("PCIe BRCM: failed attempt to enter SSC mode\n");
}
lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
cls = lnksta & PCI_EXP_LNKSTA_CLS;
nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
printf("PCIe BRCM: link up, %s Gbps x%u %s\n", link_speed_to_str(cls),
nlw, ssc_good ? "(SSC)" : "(!SSC)");
/* PCIe->SCB endian mode for BAR */
clrsetbits_le32(base + PCIE_RC_CFG_VENDOR_SPECIFIC_REG1,
VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK,
VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN);
/*
* Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
* is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
*/
setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK);
return 0;
}
static int brcm_pcie_ofdata_to_platdata(struct udevice *dev)
{
struct brcm_pcie *pcie = dev_get_priv(dev);
ofnode dn = dev_ofnode(dev);
u32 max_link_speed;
int ret;
/* Get the controller base address */
pcie->base = dev_read_addr_ptr(dev);
if (!pcie->base)
return -EINVAL;
pcie->ssc = ofnode_read_bool(dn, "brcm,enable-ssc");
ret = ofnode_read_u32(dn, "max-link-speed", &max_link_speed);
if (ret < 0 || max_link_speed > 4)
pcie->gen = 0;
else
pcie->gen = max_link_speed;
return 0;
}
static const struct dm_pci_ops brcm_pcie_ops = {
.read_config = brcm_pcie_read_config,
.write_config = brcm_pcie_write_config,
};
static const struct udevice_id brcm_pcie_ids[] = {
{ .compatible = "brcm,bcm2711-pcie" },
{ }
};
U_BOOT_DRIVER(pcie_brcm_base) = {
.name = "pcie_brcm",
.id = UCLASS_PCI,
.ops = &brcm_pcie_ops,
.of_match = brcm_pcie_ids,
.probe = brcm_pcie_probe,
.ofdata_to_platdata = brcm_pcie_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct brcm_pcie),
};