diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9127ace52a..32fa2ddc57 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -578,6 +578,13 @@ config TARGET_MX6SXSABRESD
select DM
select DM_THERMAL
+config TARGET_MX6UL_14X14_EVK
+ bool "Support mx6ul_14x14_evk"
+ select CPU_V7
+ select DM
+ select DM_THERMAL
+ select SUPPORT_SPL
+
config TARGET_GW_VENTANA
bool "Support gw_ventana"
select CPU_V7
@@ -625,14 +632,6 @@ config RMOBILE
bool "Renesas ARM SoCs"
select CPU_V7
-config TARGET_CM_FX6
- bool "Support cm_fx6"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
config ARCH_SOCFPGA
bool "Altera SOCFPGA family"
select CPU_V7
@@ -920,6 +919,7 @@ source "board/freescale/mx6qsabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
+source "board/freescale/mx6ul_14x14_evk/Kconfig"
source "board/freescale/vf610twr/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/genesi/mx51_efikamx/Kconfig"
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 10908c4c4a..dce7ffc022 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -25,17 +25,26 @@ config MX6SL
config MX6SX
bool
+config MX6UL
+ select SYS_L2CACHE_OFF
+ bool
+
choice
prompt "MX6 board select"
optional
+config TARGET_CM_FX6
+ bool "Support CM-FX6"
+ select SUPPORT_SPL
+ select DM
+ select DM_SERIAL
+ select DM_GPIO
+
config TARGET_SECOMX6
bool "Support secomx6 boards"
- select CPU_V7
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
- select CPU_V7
endchoice
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index ae99945304..9cf4eece13 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -81,19 +81,32 @@ void enable_usboh3_clk(unsigned char enable)
#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX)
void enable_enet_clk(unsigned char enable)
{
- u32 mask = MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK;
+ u32 mask, *addr;
+
+ if (is_cpu_type(MXC_CPU_MX6UL)) {
+ mask = MXC_CCM_CCGR3_ENET_MASK;
+ addr = &imx_ccm->CCGR3;
+ } else {
+ mask = MXC_CCM_CCGR1_ENET_MASK;
+ addr = &imx_ccm->CCGR1;
+ }
if (enable)
- setbits_le32(&imx_ccm->CCGR1, mask);
+ setbits_le32(addr, mask);
else
- clrbits_le32(&imx_ccm->CCGR1, mask);
+ clrbits_le32(addr, mask);
}
#endif
#ifdef CONFIG_MXC_UART
void enable_uart_clk(unsigned char enable)
{
- u32 mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
+ u32 mask;
+
+ if (is_cpu_type(MXC_CPU_MX6UL))
+ mask = MXC_CCM_CCGR5_UART_MASK;
+ else
+ mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
if (enable)
setbits_le32(&imx_ccm->CCGR5, mask);
@@ -102,25 +115,6 @@ void enable_uart_clk(unsigned char enable)
}
#endif
-#ifdef CONFIG_SPI
-/* spi_num can be from 0 - 4 */
-int enable_cspi_clock(unsigned char enable, unsigned spi_num)
-{
- u32 mask;
-
- if (spi_num > 4)
- return -EINVAL;
-
- mask = MXC_CCM_CCGR_CG_MASK << (spi_num * 2);
- if (enable)
- setbits_le32(&imx_ccm->CCGR1, mask);
- else
- clrbits_le32(&imx_ccm->CCGR1, mask);
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_MMC
int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
{
@@ -145,6 +139,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
u32 reg;
u32 mask;
+ u32 *addr;
if (i2c_num > 3)
return -EINVAL;
@@ -159,14 +154,19 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
reg &= ~mask;
__raw_writel(reg, &imx_ccm->CCGR2);
} else {
- mask = MXC_CCM_CCGR_CG_MASK
- << (MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET);
- reg = __raw_readl(&imx_ccm->CCGR1);
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+ mask = MXC_CCM_CCGR6_I2C4_MASK;
+ addr = &imx_ccm->CCGR6;
+ } else {
+ mask = MXC_CCM_CCGR1_I2C4_SERIAL_MASK;
+ addr = &imx_ccm->CCGR1;
+ }
+ reg = __raw_readl(addr);
if (enable)
reg |= mask;
else
reg &= ~mask;
- __raw_writel(reg, &imx_ccm->CCGR1);
+ __raw_writel(reg, addr);
}
return 0;
}
@@ -227,9 +227,11 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
switch (pll) {
case PLL_BUS:
- if (pfd_num == 3) {
- /* No PFD3 on PPL2 */
- return 0;
+ if (!is_cpu_type(MXC_CPU_MX6UL)) {
+ if (pfd_num == 3) {
+ /* No PFD3 on PPL2 */
+ return 0;
+ }
}
div = __raw_readl(&imx_ccm->analog_pfd_528);
freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
@@ -261,10 +263,12 @@ static u32 get_mcu_main_clk(void)
u32 get_periph_clk(void)
{
- u32 reg, freq = 0;
+ u32 reg, div = 0, freq = 0;
reg = __raw_readl(&imx_ccm->cbcdr);
if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
+ div = (reg & MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >>
+ MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET;
reg = __raw_readl(&imx_ccm->cbcmr);
reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK;
reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET;
@@ -304,7 +308,7 @@ u32 get_periph_clk(void)
}
}
- return freq;
+ return freq / (div + 1);
}
static u32 get_ipg_clk(void)
@@ -323,10 +327,12 @@ static u32 get_ipg_per_clk(void)
u32 reg, perclk_podf;
reg = __raw_readl(&imx_ccm->cscmr1);
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
- if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
- return MXC_HCLK; /* OSC 24Mhz */
-#endif
+ if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
+ is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
+ return MXC_HCLK; /* OSC 24Mhz */
+ }
+
perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
return get_ipg_clk() / (perclk_podf + 1);
@@ -337,10 +343,13 @@ static u32 get_uart_clk(void)
u32 reg, uart_podf;
u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
reg = __raw_readl(&imx_ccm->cscdr1);
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
- if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
- freq = MXC_HCLK;
-#endif
+
+ if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
+ is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
+ freq = MXC_HCLK;
+ }
+
reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
@@ -352,8 +361,14 @@ static u32 get_cspi_clk(void)
u32 reg, cspi_podf;
reg = __raw_readl(&imx_ccm->cscdr2);
- reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
- cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
+ cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
+
+ if (is_mx6dqp() || is_cpu_type(MXC_CPU_MX6SL) ||
+ is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
+ return MXC_HCLK / (cspi_podf + 1);
+ }
return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
}
@@ -405,47 +420,60 @@ static u32 get_emi_slow_clk(void)
return root_freq / (emi_slow_podf + 1);
}
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
static u32 get_mmdc_ch0_clk(void)
{
u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
- u32 freq, podf;
- podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \
- >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
+ u32 freq, podf, per2_clk2_podf;
- switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
- MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
- case 0:
- freq = decode_pll(PLL_BUS, MXC_HCLK);
- break;
- case 1:
- freq = mxc_get_pll_pfd(PLL_BUS, 2);
- break;
- case 2:
- freq = mxc_get_pll_pfd(PLL_BUS, 0);
- break;
- case 3:
- /* static / 2 divider */
- freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
+ is_cpu_type(MXC_CPU_MX6SL)) {
+ podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
+ MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
+ if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
+ per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
+ MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
+ if (is_cpu_type(MXC_CPU_MX6SL)) {
+ if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
+ freq = MXC_HCLK;
+ else
+ freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+ } else {
+ if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
+ freq = decode_pll(PLL_BUS, MXC_HCLK);
+ else
+ freq = decode_pll(PLL_USBOTG, MXC_HCLK);
+ }
+ } else {
+ per2_clk2_podf = 0;
+ switch ((cbcmr &
+ MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
+ MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
+ case 0:
+ freq = decode_pll(PLL_BUS, MXC_HCLK);
+ break;
+ case 1:
+ freq = mxc_get_pll_pfd(PLL_BUS, 2);
+ break;
+ case 2:
+ freq = mxc_get_pll_pfd(PLL_BUS, 0);
+ break;
+ case 3:
+ /* static / 2 divider */
+ freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
+ break;
+ }
+ }
+ return freq / (podf + 1) / (per2_clk2_podf + 1);
+ } else {
+ podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
+ MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
+ return get_periph_clk() / (podf + 1);
}
-
- return freq / (podf + 1);
-
}
-#else
-static u32 get_mmdc_ch0_clk(void)
-{
- u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
- u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
- MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
- return get_periph_clk() / (mmdc_ch0_podf + 1);
-}
-#endif
-
-#ifdef CONFIG_MX6SX
+#ifdef CONFIG_FSL_QSPI
/* qspi_num can be from 0 - 1 */
void enable_qspi_clk(int qspi_num)
{
@@ -606,6 +634,7 @@ u32 imx_get_fecclk(void)
return mxc_get_clock(MXC_IPG_CLK);
}
+#if defined(CONFIG_CMD_SATA) || defined(CONFIG_PCIE_IMX)
static int enable_enet_pll(uint32_t en)
{
struct mxc_ccm_reg *const imx_ccm
@@ -630,8 +659,9 @@ static int enable_enet_pll(uint32_t en)
writel(reg, &imx_ccm->analog_pll_enet);
return 0;
}
+#endif
-#ifndef CONFIG_MX6SX
+#ifdef CONFIG_CMD_SATA
static void ungate_sata_clock(void)
{
struct mxc_ccm_reg *const imx_ccm =
@@ -640,18 +670,7 @@ static void ungate_sata_clock(void)
/* Enable SATA clock. */
setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
}
-#endif
-static void ungate_pcie_clock(void)
-{
- struct mxc_ccm_reg *const imx_ccm =
- (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* Enable PCIe clock. */
- setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
-}
-
-#ifndef CONFIG_MX6SX
int enable_sata_clock(void)
{
ungate_sata_clock();
@@ -667,6 +686,16 @@ void disable_sata_clock(void)
}
#endif
+#ifdef CONFIG_PCIE_IMX
+static void ungate_pcie_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* Enable PCIe clock. */
+ setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
+}
+
int enable_pcie_clock(void)
{
struct anatop_regs *anatop_regs =
@@ -706,7 +735,7 @@ int enable_pcie_clock(void)
clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
/* Party time! Ungate the clock to the PCIe. */
-#ifndef CONFIG_MX6SX
+#ifdef CONFIG_CMD_SATA
ungate_sata_clock();
#endif
ungate_pcie_clock();
@@ -714,6 +743,7 @@ int enable_pcie_clock(void)
return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
BM_ANADIG_PLL_ENET_ENABLE_PCIE);
}
+#endif
#ifdef CONFIG_SECURE_BOOT
void hab_caam_clock_enable(unsigned char enable)
@@ -856,6 +886,11 @@ void enable_ipu_clock(void)
reg = readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
writel(reg, &mxc_ccm->CCGR3);
+
+ if (is_mx6dqp()) {
+ setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
+ setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
+ }
}
#endif
/***************************************************/
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 86c8354217..b808627a42 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -71,6 +71,50 @@ void mx6sx_dram_iocfg(unsigned width,
}
#endif
+#ifdef CONFIG_MX6UL
+void mx6ul_dram_iocfg(unsigned width,
+ const struct mx6ul_iomux_ddr_regs *ddr,
+ const struct mx6ul_iomux_grp_regs *grp)
+{
+ struct mx6ul_iomux_ddr_regs *mx6_ddr_iomux;
+ struct mx6ul_iomux_grp_regs *mx6_grp_iomux;
+
+ mx6_ddr_iomux = (struct mx6ul_iomux_ddr_regs *)MX6UL_IOM_DDR_BASE;
+ mx6_grp_iomux = (struct mx6ul_iomux_grp_regs *)MX6UL_IOM_GRP_BASE;
+
+ /* DDR IO TYPE */
+ writel(grp->grp_ddr_type, &mx6_grp_iomux->grp_ddr_type);
+ writel(grp->grp_ddrpke, &mx6_grp_iomux->grp_ddrpke);
+
+ /* CLOCK */
+ writel(ddr->dram_sdclk_0, &mx6_ddr_iomux->dram_sdclk_0);
+
+ /* ADDRESS */
+ writel(ddr->dram_cas, &mx6_ddr_iomux->dram_cas);
+ writel(ddr->dram_ras, &mx6_ddr_iomux->dram_ras);
+ writel(grp->grp_addds, &mx6_grp_iomux->grp_addds);
+
+ /* Control */
+ writel(ddr->dram_reset, &mx6_ddr_iomux->dram_reset);
+ writel(ddr->dram_sdba2, &mx6_ddr_iomux->dram_sdba2);
+ writel(ddr->dram_odt0, &mx6_ddr_iomux->dram_odt0);
+ writel(ddr->dram_odt1, &mx6_ddr_iomux->dram_odt1);
+ writel(grp->grp_ctlds, &mx6_grp_iomux->grp_ctlds);
+
+ /* Data Strobes */
+ writel(grp->grp_ddrmode_ctl, &mx6_grp_iomux->grp_ddrmode_ctl);
+ writel(ddr->dram_sdqs0, &mx6_ddr_iomux->dram_sdqs0);
+ writel(ddr->dram_sdqs1, &mx6_ddr_iomux->dram_sdqs1);
+
+ /* Data */
+ writel(grp->grp_ddrmode, &mx6_grp_iomux->grp_ddrmode);
+ writel(grp->grp_b0ds, &mx6_grp_iomux->grp_b0ds);
+ writel(grp->grp_b1ds, &mx6_grp_iomux->grp_b1ds);
+ writel(ddr->dram_dqm0, &mx6_ddr_iomux->dram_dqm0);
+ writel(ddr->dram_dqm1, &mx6_ddr_iomux->dram_dqm1);
+}
+#endif
+
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
/* Configure MX6DQ mmdc iomux */
void mx6dq_dram_iocfg(unsigned width,
@@ -243,19 +287,17 @@ void mx6sdl_dram_iocfg(unsigned width,
*/
#define MR(val, ba, cmd, cs1) \
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
-#ifdef CONFIG_MX6SX
-#define MMDC1(entry, value) do {} while (0)
-#else
-#define MMDC1(entry, value) do { mmdc1->entry = value; } while (0)
-#endif
+#define MMDC1(entry, value) do { \
+ if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL)) \
+ mmdc1->entry = value; \
+ } while (0)
+
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
const struct mx6_mmdc_calibration *calib,
const struct mx6_ddr3_cfg *ddr3_cfg)
{
volatile struct mmdc_p_regs *mmdc0;
-#ifndef CONFIG_MX6SX
volatile struct mmdc_p_regs *mmdc1;
-#endif
u32 val;
u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
@@ -270,9 +312,8 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
u16 mem_speed = ddr3_cfg->mem_speed;
mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
-#ifndef CONFIG_MX6SX
- mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
-#endif
+ if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL))
+ mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
/* Limit mem_speed for MX6D/MX6Q */
if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c
index 8dee595eaf..27cabe477d 100644
--- a/arch/arm/cpu/armv7/mx6/hab.c
+++ b/arch/arm/cpu/armv7/mx6/hab.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010-2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -111,6 +111,153 @@
* +------------+ + CSF_PAD_SIZE
*/
+#define MAX_RECORD_BYTES (8*1024) /* 4 kbytes */
+
+struct record {
+ uint8_t tag; /* Tag */
+ uint8_t len[2]; /* Length */
+ uint8_t par; /* Version */
+ uint8_t contents[MAX_RECORD_BYTES];/* Record Data */
+ bool any_rec_flag;
+};
+
+char *rsn_str[] = {"RSN = HAB_RSN_ANY (0x00)\n",
+ "RSN = HAB_ENG_FAIL (0x30)\n",
+ "RSN = HAB_INV_ADDRESS (0x22)\n",
+ "RSN = HAB_INV_ASSERTION (0x0C)\n",
+ "RSN = HAB_INV_CALL (0x28)\n",
+ "RSN = HAB_INV_CERTIFICATE (0x21)\n",
+ "RSN = HAB_INV_COMMAND (0x06)\n",
+ "RSN = HAB_INV_CSF (0x11)\n",
+ "RSN = HAB_INV_DCD (0x27)\n",
+ "RSN = HAB_INV_INDEX (0x0F)\n",
+ "RSN = HAB_INV_IVT (0x05)\n",
+ "RSN = HAB_INV_KEY (0x1D)\n",
+ "RSN = HAB_INV_RETURN (0x1E)\n",
+ "RSN = HAB_INV_SIGNATURE (0x18)\n",
+ "RSN = HAB_INV_SIZE (0x17)\n",
+ "RSN = HAB_MEM_FAIL (0x2E)\n",
+ "RSN = HAB_OVR_COUNT (0x2B)\n",
+ "RSN = HAB_OVR_STORAGE (0x2D)\n",
+ "RSN = HAB_UNS_ALGORITHM (0x12)\n",
+ "RSN = HAB_UNS_COMMAND (0x03)\n",
+ "RSN = HAB_UNS_ENGINE (0x0A)\n",
+ "RSN = HAB_UNS_ITEM (0x24)\n",
+ "RSN = HAB_UNS_KEY (0x1B)\n",
+ "RSN = HAB_UNS_PROTOCOL (0x14)\n",
+ "RSN = HAB_UNS_STATE (0x09)\n",
+ "RSN = INVALID\n",
+ NULL};
+
+char *sts_str[] = {"STS = HAB_SUCCESS (0xF0)\n",
+ "STS = HAB_FAILURE (0x33)\n",
+ "STS = HAB_WARNING (0x69)\n",
+ "STS = INVALID\n",
+ NULL};
+
+char *eng_str[] = {"ENG = HAB_ENG_ANY (0x00)\n",
+ "ENG = HAB_ENG_SCC (0x03)\n",
+ "ENG = HAB_ENG_RTIC (0x05)\n",
+ "ENG = HAB_ENG_SAHARA (0x06)\n",
+ "ENG = HAB_ENG_CSU (0x0A)\n",
+ "ENG = HAB_ENG_SRTC (0x0C)\n",
+ "ENG = HAB_ENG_DCP (0x1B)\n",
+ "ENG = HAB_ENG_CAAM (0x1D)\n",
+ "ENG = HAB_ENG_SNVS (0x1E)\n",
+ "ENG = HAB_ENG_OCOTP (0x21)\n",
+ "ENG = HAB_ENG_DTCP (0x22)\n",
+ "ENG = HAB_ENG_ROM (0x36)\n",
+ "ENG = HAB_ENG_HDCP (0x24)\n",
+ "ENG = HAB_ENG_RTL (0x77)\n",
+ "ENG = HAB_ENG_SW (0xFF)\n",
+ "ENG = INVALID\n",
+ NULL};
+
+char *ctx_str[] = {"CTX = HAB_CTX_ANY(0x00)\n",
+ "CTX = HAB_CTX_FAB (0xFF)\n",
+ "CTX = HAB_CTX_ENTRY (0xE1)\n",
+ "CTX = HAB_CTX_TARGET (0x33)\n",
+ "CTX = HAB_CTX_AUTHENTICATE (0x0A)\n",
+ "CTX = HAB_CTX_DCD (0xDD)\n",
+ "CTX = HAB_CTX_CSF (0xCF)\n",
+ "CTX = HAB_CTX_COMMAND (0xC0)\n",
+ "CTX = HAB_CTX_AUT_DAT (0xDB)\n",
+ "CTX = HAB_CTX_ASSERT (0xA0)\n",
+ "CTX = HAB_CTX_EXIT (0xEE)\n",
+ "CTX = INVALID\n",
+ NULL};
+
+uint8_t hab_statuses[5] = {
+ HAB_STS_ANY,
+ HAB_FAILURE,
+ HAB_WARNING,
+ HAB_SUCCESS,
+ -1
+};
+
+uint8_t hab_reasons[26] = {
+ HAB_RSN_ANY,
+ HAB_ENG_FAIL,
+ HAB_INV_ADDRESS,
+ HAB_INV_ASSERTION,
+ HAB_INV_CALL,
+ HAB_INV_CERTIFICATE,
+ HAB_INV_COMMAND,
+ HAB_INV_CSF,
+ HAB_INV_DCD,
+ HAB_INV_INDEX,
+ HAB_INV_IVT,
+ HAB_INV_KEY,
+ HAB_INV_RETURN,
+ HAB_INV_SIGNATURE,
+ HAB_INV_SIZE,
+ HAB_MEM_FAIL,
+ HAB_OVR_COUNT,
+ HAB_OVR_STORAGE,
+ HAB_UNS_ALGORITHM,
+ HAB_UNS_COMMAND,
+ HAB_UNS_ENGINE,
+ HAB_UNS_ITEM,
+ HAB_UNS_KEY,
+ HAB_UNS_PROTOCOL,
+ HAB_UNS_STATE,
+ -1
+};
+
+uint8_t hab_contexts[12] = {
+ HAB_CTX_ANY,
+ HAB_CTX_FAB,
+ HAB_CTX_ENTRY,
+ HAB_CTX_TARGET,
+ HAB_CTX_AUTHENTICATE,
+ HAB_CTX_DCD,
+ HAB_CTX_CSF,
+ HAB_CTX_COMMAND,
+ HAB_CTX_AUT_DAT,
+ HAB_CTX_ASSERT,
+ HAB_CTX_EXIT,
+ -1
+};
+
+uint8_t hab_engines[16] = {
+ HAB_ENG_ANY,
+ HAB_ENG_SCC,
+ HAB_ENG_RTIC,
+ HAB_ENG_SAHARA,
+ HAB_ENG_CSU,
+ HAB_ENG_SRTC,
+ HAB_ENG_DCP,
+ HAB_ENG_CAAM,
+ HAB_ENG_SNVS,
+ HAB_ENG_OCOTP,
+ HAB_ENG_DTCP,
+ HAB_ENG_ROM,
+ HAB_ENG_HDCP,
+ HAB_ENG_RTL,
+ HAB_ENG_SW,
+ -1
+};
+
bool is_hab_enabled(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
@@ -122,6 +269,28 @@ bool is_hab_enabled(void)
return (reg & 0x2) == 0x2;
}
+static inline uint8_t get_idx(uint8_t *list, uint8_t tgt)
+{
+ uint8_t idx = 0;
+ uint8_t element = list[idx];
+ while (element != -1) {
+ if (element == tgt)
+ return idx;
+ element = list[++idx];
+ }
+ return -1;
+}
+
+void process_event_record(uint8_t *event_data, size_t bytes)
+{
+ struct record *rec = (struct record *)event_data;
+
+ printf("\n\n%s", sts_str[get_idx(hab_statuses, rec->contents[0])]);
+ printf("%s", rsn_str[get_idx(hab_reasons, rec->contents[1])]);
+ printf("%s", ctx_str[get_idx(hab_contexts, rec->contents[2])]);
+ printf("%s", eng_str[get_idx(hab_engines, rec->contents[3])]);
+}
+
void display_event(uint8_t *event_data, size_t bytes)
{
uint32_t i;
@@ -137,6 +306,8 @@ void display_event(uint8_t *event_data, size_t bytes)
else
printf(" 0x%02x", event_data[i]);
}
+
+ process_event_record(event_data, bytes);
}
int get_hab_status(void)
@@ -252,7 +423,8 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
* do cache flushes. don't think any
* exist, so we ignore them.
*/
- writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
+ if (!is_mx6dqp())
+ writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
} else if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO)) {
writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 29de6243dc..8ad8da8465 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -62,12 +62,12 @@ u32 get_cpu_rev(void)
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 reg = readl(&anatop->digprog_sololite);
u32 type = ((reg >> 16) & 0xff);
- u32 major;
+ u32 major, cfg = 0;
if (type != MXC_CPU_MX6SL) {
reg = readl(&anatop->digprog);
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
- u32 cfg = readl(&scu->config) & 3;
+ cfg = readl(&scu->config) & 3;
type = ((reg >> 16) & 0xff);
if (type == MXC_CPU_MX6DL) {
if (!cfg)
@@ -81,6 +81,13 @@ u32 get_cpu_rev(void)
}
major = ((reg >> 8) & 0xff);
+ if ((major >= 1) &&
+ ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
+ major--;
+ type = MXC_CPU_MX6QP;
+ if (cfg == 1)
+ type = MXC_CPU_MX6DP;
+ }
reg &= 0xff; /* mx6 silicon revision */
return (type << 12) | (reg + (0x10 * (major + 1)));
}
@@ -309,11 +316,10 @@ static void imx_set_wdog_powerdown(bool enable)
{
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
-
-#ifdef CONFIG_MX6SX
struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
- writew(enable, &wdog3->wmcr);
-#endif
+
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+ writew(enable, &wdog3->wmcr);
/* Write to the PDE (Power Down Enable) bit */
writew(enable, &wdog1->wmcr);
@@ -335,9 +341,12 @@ static void set_ahb_rate(u32 val)
static void clear_mmdc_ch_mask(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 reg;
+ reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- writel(0, &mxc_ccm->ccdr);
+ reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+ writel(reg, &mxc_ccm->ccdr);
}
static void init_bandgap(void)
@@ -520,7 +529,7 @@ void s_init(void)
u32 mask528;
u32 reg, periph1, periph2;
- if (is_cpu_type(MXC_CPU_MX6SX))
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index 5e56cfe8f2..e27546c906 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -122,6 +122,10 @@ unsigned imx_ddr_size(void)
const char *get_imx_type(u32 imxtype)
{
switch (imxtype) {
+ case MXC_CPU_MX6QP:
+ return "6QP"; /* Quad-Plus version of the mx6 */
+ case MXC_CPU_MX6DP:
+ return "6DP"; /* Dual-Plus version of the mx6 */
case MXC_CPU_MX6Q:
return "6Q"; /* Quad-core version of the mx6 */
case MXC_CPU_MX6D:
@@ -134,6 +138,8 @@ const char *get_imx_type(u32 imxtype)
return "6SL"; /* Solo-Lite version of the mx6 */
case MXC_CPU_MX6SX:
return "6SX"; /* SoloX version of the mx6 */
+ case MXC_CPU_MX6UL:
+ return "6UL"; /* Ultra-Lite version of the mx6 */
case MXC_CPU_MX51:
return "51";
case MXC_CPU_MX53:
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index c12556addf..1a88ce6862 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -45,7 +45,8 @@ static inline int gpt_has_clk_source_osc(void)
#if defined(CONFIG_MX6)
if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) &&
(soc_rev() > CHIP_REV_1_0)) || is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX))
+ is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX) ||
+ is_cpu_type(MXC_CPU_MX6UL))
return 1;
return 0;
@@ -103,10 +104,11 @@ int timer_init(void)
if (gpt_has_clk_source_osc()) {
i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
- /* For DL/S, SX, set 24Mhz OSC Enable bit and prescaler */
+ /* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */
if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO) ||
- is_cpu_type(MXC_CPU_MX6SX)) {
+ is_cpu_type(MXC_CPU_MX6SX) ||
+ is_cpu_type(MXC_CPU_MX6UL)) {
i |= GPTCR_24MEN;
/* Produce 3Mhz clock */
diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
index 4715f4e894..c7f9fffacb 100644
--- a/arch/arm/include/asm/arch-imx/cpu.h
+++ b/arch/arm/include/asm/arch-imx/cpu.h
@@ -10,8 +10,11 @@
#define MXC_CPU_MX6DL 0x61
#define MXC_CPU_MX6SX 0x62
#define MXC_CPU_MX6Q 0x63
-#define MXC_CPU_MX6D 0x64
+#define MXC_CPU_MX6UL 0x64
#define MXC_CPU_MX6SOLO 0x65 /* dummy ID */
+#define MXC_CPU_MX6D 0x67
+#define MXC_CPU_MX6DP 0x68
+#define MXC_CPU_MX6QP 0x69
#define CS0_128 0
#define CS0_64M_CS1_64M 1
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index a6de5ee4bc..7b3bbb8185 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -57,7 +57,6 @@ void hab_caam_clock_enable(unsigned char enable);
void enable_ocotp_clk(unsigned char enable);
void enable_usboh3_clk(unsigned char enable);
void enable_uart_clk(unsigned char enable);
-int enable_cspi_clock(unsigned char enable, unsigned spi_num);
int enable_usdhc_clk(unsigned char enable, unsigned bus_num);
int enable_sata_clock(void);
void disable_sata_clock(void);
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 887d04850f..fe75da4c98 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -110,6 +110,7 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCR_RBC_EN (1 << 27)
#define MXC_CCM_CCR_REG_BYPASS_CNT_MASK (0x3F << 21)
#define MXC_CCM_CCR_REG_BYPASS_CNT_OFFSET 21
+/* CCR_WB does not exist on i.MX6SX/UL */
#define MXC_CCM_CCR_WB_COUNT_MASK 0x7
#define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16)
#define MXC_CCM_CCR_COSC_EN (1 << 12)
@@ -123,6 +124,8 @@ struct mxc_ccm_reg {
/* Define the bits in register CCDR */
#define MXC_CCM_CCDR_MMDC_CH1_HS_MASK (1 << 16)
#define MXC_CCM_CCDR_MMDC_CH0_HS_MASK (1 << 17)
+/* Exists on i.MX6QP */
+#define MXC_CCM_CCDR_MMDC_CH1_AXI_ROOT_CG (1 << 18)
/* Define the bits in register CSR */
#define MXC_CCM_CSR_COSC_READY (1 << 5)
@@ -148,12 +151,11 @@ struct mxc_ccm_reg {
/* Define the bits in register CBCDR */
#define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK (0x7 << 27)
#define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET 27
-#define MXC_CCM_CBCDR_PERIPH2_CLK2_SEL (1 << 26)
+#define MXC_CCM_CBCDR_PERIPH2_CLK_SEL (1 << 26)
#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (1 << 25)
-#ifndef CONFIG_MX6SX
+/* MMDC_CH0 not exists on i.MX6SX */
#define MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK (0x7 << 19)
#define MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET 19
-#endif
#define MXC_CCM_CBCDR_AXI_PODF_MASK (0x7 << 16)
#define MXC_CCM_CBCDR_AXI_PODF_OFFSET 16
#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
@@ -176,7 +178,7 @@ struct mxc_ccm_reg {
#define MXC_CCM_CBCMR_GPU2D_CORE_PODF_OFFSET 23
#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK (0x3 << 21)
#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET 21
-#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK2_SEL (1 << 20)
+#define MXC_CCM_CBCMR_PERIPH2_CLK2_SEL (1 << 20)
#define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK (0x3 << 18)
#define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET 18
#ifndef CONFIG_MX6SX
@@ -195,26 +197,25 @@ struct mxc_ccm_reg {
#define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_OFFSET 8
#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4)
#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4
-#ifndef CONFIG_MX6SX
-#define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1)
-#define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0)
-#endif
+/* Exists on i.MX6QP */
+#define MXC_CCM_CBCMR_PRE_CLK_SEL (1 << 1)
/* Define the bits in register CSCMR1 */
#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK (0x3 << 29)
#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET 29
-#ifdef CONFIG_MX6SX
+/* QSPI1 exist on i.MX6SX/UL */
#define MXC_CCM_CSCMR1_QSPI1_PODF_MASK (0x7 << 26)
#define MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET 26
-#else
#define MXC_CCM_CSCMR1_ACLK_EMI_MASK (0x3 << 27)
#define MXC_CCM_CSCMR1_ACLK_EMI_OFFSET 27
-#endif
#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK (0x7 << 23)
#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET 23
/* ACLK_EMI_PODF is LCFIF2_PODF on MX6SX */
#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK (0x7 << 20)
#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET 20
+/* CSCMR1_GPMI/BCH exist on i.MX6UL */
+#define MXC_CCM_CSCMR1_GPMI_CLK_SEL (1 << 19)
+#define MXC_CCM_CSCMR1_BCH_CLK_SEL (1 << 18)
#define MXC_CCM_CSCMR1_USDHC4_CLK_SEL (1 << 19)
#define MXC_CCM_CSCMR1_USDHC3_CLK_SEL (1 << 18)
#define MXC_CCM_CSCMR1_USDHC2_CLK_SEL (1 << 17)
@@ -225,14 +226,13 @@ struct mxc_ccm_reg {
#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET 12
#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 10)
#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET 10
-#ifdef CONFIG_MX6SX
+/* QSPI1 exist on i.MX6SX/UL */
#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK (0x7 << 7)
#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7
-#endif
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
-#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
+/* CSCMR1_PER_CLK exists on i.MX6SX/SL/QP */
+#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
#define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6
-#endif
+
#define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F
/* Define the bits in register CSCMR2 */
@@ -244,21 +244,24 @@ struct mxc_ccm_reg {
#define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19
#define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11)
#define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10)
-#ifdef CONFIG_MX6SX
+/* CSCMR1_CAN_CLK exists on i.MX6SX/QP */
#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3 << 8)
#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 8
+
#define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK (0x3F << 2)
#define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2
-#else
-#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2)
-#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2
-#endif
/* Define the bits in register CSCDR1 */
#ifndef CONFIG_MX6SX
#define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK (0x7 << 25)
#define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET 25
#endif
+/* CSCDR1_GPMI/BCH exist on i.MX6UL */
+#define MXC_CCM_CSCDR1_GPMI_PODF_MASK (0x7 << 22)
+#define MXC_CCM_CSCDR1_GPMI_PODF_OFFSET 22
+#define MXC_CCM_CSCDR1_BCH_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CSCDR1_BCH_PODF_OFFSET 19
+
#define MXC_CCM_CSCDR1_USDHC4_PODF_MASK (0x7 << 22)
#define MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET 22
#define MXC_CCM_CSCDR1_USDHC3_PODF_MASK (0x7 << 19)
@@ -273,16 +276,10 @@ struct mxc_ccm_reg {
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
#endif
-#ifdef CONFIG_MX6SL
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F
-#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
-#else
#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
-#ifdef CONFIG_MX6SX
-#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
-#endif
-#endif
#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
+/* UART_CLK_SEL exists on i.MX6SL/SX/QP */
+#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
/* Define the bits in register CS1CDR */
#define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK (0x3F << 25)
@@ -299,7 +296,7 @@ struct mxc_ccm_reg {
#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET 0
/* Define the bits in register CS2CDR */
-#ifdef CONFIG_MX6SX
+/* QSPI2 on i.MX6SX */
#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK (0x3F << 21)
#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF_OFFSET 21
#define MXC_CCM_CS2CDR_QSPI2_CLK_PODF(v) (((v) & 0x3f) << 21)
@@ -309,17 +306,34 @@ struct mxc_ccm_reg {
#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK (0x7 << 15)
#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL_OFFSET 15
#define MXC_CCM_CS2CDR_QSPI2_CLK_SEL(v) (((v) & 0x7) << 15)
-#else
+
#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK (0x3F << 21)
#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET 21
#define MXC_CCM_CS2CDR_ENFC_CLK_PODF(v) (((v) & 0x3f) << 21)
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18)
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v) (((v) & 0x7) << 18)
-#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16
-#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16)
-#endif
+
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQP (0x7 << 15)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQP 15
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQP(v) (((v) & 0x7) << 15)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQ (0x3 << 16)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQ 16
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQ(v) (((v) & 0x3) << 16)
+
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK \
+ ((is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) ? \
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQP : \
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK_DQ)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET \
+ ((is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) ? \
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQP : \
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET_DQ)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) \
+ ((is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) ? \
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQP(v) : \
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_DQ(v))
+
#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12)
#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12
#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9)
@@ -384,6 +398,9 @@ struct mxc_ccm_reg {
/* Define the bits in register CSCDR2 */
#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19)
#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19
+/* ECSPI_CLK_SEL exists on i.MX6SX/SL/QP */
+#define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK (0x1 << 18)
+
/* All IPU2_DI1 are LCDIF1 on MX6SX */
#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15
@@ -544,10 +561,9 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR1_ECSPI4S_MASK (3 << MXC_CCM_CCGR1_ECSPI4S_OFFSET)
#define MXC_CCM_CCGR1_ECSPI5S_OFFSET 8
#define MXC_CCM_CCGR1_ECSPI5S_MASK (3 << MXC_CCM_CCGR1_ECSPI5S_OFFSET)
-#ifndef CONFIG_MX6SX
-#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET 10
-#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET)
-#endif
+/* CCGR1_ENET does not exist on i.MX6SX/UL */
+#define MXC_CCM_CCGR1_ENET_OFFSET 10
+#define MXC_CCM_CCGR1_ENET_MASK (3 << MXC_CCM_CCGR1_ENET_OFFSET)
#define MXC_CCM_CCGR1_EPIT1S_OFFSET 12
#define MXC_CCM_CCGR1_EPIT1S_MASK (3 << MXC_CCM_CCGR1_EPIT1S_OFFSET)
#define MXC_CCM_CCGR1_EPIT2S_OFFSET 14
@@ -618,21 +634,21 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET)
#endif
-#ifdef CONFIG_MX6SX
+/* Exist on i.MX6SX */
#define MXC_CCM_CCGR3_M4_OFFSET 2
#define MXC_CCM_CCGR3_M4_MASK (3 << MXC_CCM_CCGR3_M4_OFFSET)
#define MXC_CCM_CCGR3_ENET_OFFSET 4
#define MXC_CCM_CCGR3_ENET_MASK (3 << MXC_CCM_CCGR3_ENET_OFFSET)
#define MXC_CCM_CCGR3_QSPI_OFFSET 14
#define MXC_CCM_CCGR3_QSPI_MASK (3 << MXC_CCM_CCGR3_QSPI_OFFSET)
-#else
+
#define MXC_CCM_CCGR3_IPU1_IPU_OFFSET 0
#define MXC_CCM_CCGR3_IPU1_IPU_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
#define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 2
#define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET)
#define MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET 4
#define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET)
-#endif
+
#define MXC_CCM_CCGR3_IPU2_IPU_OFFSET 6
#define MXC_CCM_CCGR3_IPU2_IPU_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_OFFSET)
#define MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET 8
@@ -641,15 +657,22 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET)
#define MXC_CCM_CCGR3_LDB_DI0_OFFSET 12
#define MXC_CCM_CCGR3_LDB_DI0_MASK (3 << MXC_CCM_CCGR3_LDB_DI0_OFFSET)
-#ifdef CONFIG_MX6SX
+
+/* QSPI1 exists on i.MX6SX/UL */
#define MXC_CCM_CCGR3_QSPI1_OFFSET 14
#define MXC_CCM_CCGR3_QSPI1_MASK (3 << MXC_CCM_CCGR3_QSPI1_OFFSET)
-#else
+
#define MXC_CCM_CCGR3_LDB_DI1_OFFSET 14
#define MXC_CCM_CCGR3_LDB_DI1_MASK (3 << MXC_CCM_CCGR3_LDB_DI1_OFFSET)
#define MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET 16
#define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3 << MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET)
-#endif
+
+/* A7_CLKDIV/WDOG1 on i.MX6UL */
+#define MXC_CCM_CCGR3_WDOG1_CLK_ENABLE_OFFSET 16
+#define MXC_CCM_CCGR3_WDOG1_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR3_WDOG1_CLK_ENABLE_OFFSET)
+#define MXC_CCM_CCGR3_A7_CLKDIV_PATCH_OFFSET 18
+#define MXC_CCM_CCGR3_A7_CLKDIV_PATCH_MASK (3 << MXC_CCM_CCGR3_A7_CLKDIV_PATCH_OFFSET)
+
#define MXC_CCM_CCGR3_MLB_OFFSET 18
#define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET)
#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20
@@ -662,8 +685,16 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET)
#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET 26
#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET)
+/* AXI on i.MX6UL */
+#define MXC_CCM_CCGR3_AXI_CLK_OFFSET 28
+#define MXC_CCM_CCGR3_AXI_CLK_MASK (3 << MXC_CCM_CCGR3_AXI_CLK_OFFSET)
#define MXC_CCM_CCGR3_OCRAM_OFFSET 28
#define MXC_CCM_CCGR3_OCRAM_MASK (3 << MXC_CCM_CCGR3_OCRAM_OFFSET)
+
+/* GPIO4 on i.MX6UL */
+#define MXC_CCM_CCGR3_GPIO4_CLK_OFFSET 30
+#define MXC_CCM_CCGR3_GPIO4_CLK_MASK (3 << MXC_CCM_CCGR3_GPIO4_CLK_OFFSET)
+
#ifndef CONFIG_MX6SX
#define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30
#define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET)
@@ -671,13 +702,11 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR4_PCIE_OFFSET 0
#define MXC_CCM_CCGR4_PCIE_MASK (3 << MXC_CCM_CCGR4_PCIE_OFFSET)
-#ifdef CONFIG_MX6SX
+/* QSPI2 on i.MX6SX */
#define MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET 10
#define MXC_CCM_CCGR4_QSPI2_ENFC_MASK (3 << MXC_CCM_CCGR4_QSPI2_ENFC_OFFSET)
-#else
#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET 8
#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET)
-#endif
#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET 12
#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET)
#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET 14
@@ -728,19 +757,28 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR5_SAI2_MASK (3 << MXC_CCM_CCGR5_SAI2_OFFSET)
#endif
+/* PRG_CLK0 exists on i.MX6QP */
+#define MXC_CCM_CCGR6_PRG_CLK0_MASK (3 << 24)
+
#define MXC_CCM_CCGR6_USBOH3_OFFSET 0
#define MXC_CCM_CCGR6_USBOH3_MASK (3 << MXC_CCM_CCGR6_USBOH3_OFFSET)
#define MXC_CCM_CCGR6_USDHC1_OFFSET 2
#define MXC_CCM_CCGR6_USDHC1_MASK (3 << MXC_CCM_CCGR6_USDHC1_OFFSET)
#define MXC_CCM_CCGR6_USDHC2_OFFSET 4
#define MXC_CCM_CCGR6_USDHC2_MASK (3 << MXC_CCM_CCGR6_USDHC2_OFFSET)
+/* GPMI/BCH on i.MX6UL */
+#define MXC_CCM_CCGR6_BCH_OFFSET 6
+#define MXC_CCM_CCGR6_BCH_MASK (3 << MXC_CCM_CCGR6_BCH_OFFSET)
+#define MXC_CCM_CCGR6_GPMI_OFFSET 8
+#define MXC_CCM_CCGR6_GPMI_MASK (3 << MXC_CCM_CCGR6_GPMI_OFFSET)
+
#define MXC_CCM_CCGR6_USDHC3_OFFSET 6
#define MXC_CCM_CCGR6_USDHC3_MASK (3 << MXC_CCM_CCGR6_USDHC3_OFFSET)
#define MXC_CCM_CCGR6_USDHC4_OFFSET 8
#define MXC_CCM_CCGR6_USDHC4_MASK (3 << MXC_CCM_CCGR6_USDHC4_OFFSET)
#define MXC_CCM_CCGR6_EMI_SLOW_OFFSET 10
#define MXC_CCM_CCGR6_EMI_SLOW_MASK (3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET)
-#ifdef CONFIG_MX6SX
+/* The following *CCGR6* exist only i.MX6SX */
#define MXC_CCM_CCGR6_PWM8_OFFSET 16
#define MXC_CCM_CCGR6_PWM8_MASK (3 << MXC_CCM_CCGR6_PWM8_OFFSET)
#define MXC_CCM_CCGR6_VADC_OFFSET 20
@@ -755,10 +793,9 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR6_PWM6_MASK (3 << MXC_CCM_CCGR6_PWM6_OFFSET)
#define MXC_CCM_CCGR6_PWM7_OFFSET 30
#define MXC_CCM_CCGR6_PWM7_MASK (3 << MXC_CCM_CCGR6_PWM7_OFFSET)
-#else
+/* The two does not exist on i.MX6SX */
#define MXC_CCM_CCGR6_VDOAXICLK_OFFSET 12
#define MXC_CCM_CCGR6_VDOAXICLK_MASK (3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET)
-#endif
#define BM_ANADIG_PLL_SYS_LOCK 0x80000000
#define BP_ANADIG_PLL_SYS_RSVD0 20
diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h
index c9e5318bfb..d0eaa67180 100644
--- a/arch/arm/include/asm/arch-mx6/hab.h
+++ b/arch/arm/include/asm/arch-mx6/hab.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. All Rights Reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*
@@ -23,24 +23,68 @@ enum hab_status {
/* Security Configuration definitions */
enum hab_config {
- HAB_CFG_RETURN = 0x33, /**< Field Return IC */
- HAB_CFG_OPEN = 0xf0, /**< Non-secure IC */
- HAB_CFG_CLOSED = 0xcc /**< Secure IC */
+ HAB_CFG_RETURN = 0x33, /* < Field Return IC */
+ HAB_CFG_OPEN = 0xf0, /* < Non-secure IC */
+ HAB_CFG_CLOSED = 0xcc /* < Secure IC */
};
/* State definitions */
enum hab_state {
- HAB_STATE_INITIAL = 0x33, /**< Initialising state (transitory) */
- HAB_STATE_CHECK = 0x55, /**< Check state (non-secure) */
- HAB_STATE_NONSECURE = 0x66, /**< Non-secure state */
- HAB_STATE_TRUSTED = 0x99, /**< Trusted state */
- HAB_STATE_SECURE = 0xaa, /**< Secure state */
- HAB_STATE_FAIL_SOFT = 0xcc, /**< Soft fail state */
- HAB_STATE_FAIL_HARD = 0xff, /**< Hard fail state (terminal) */
- HAB_STATE_NONE = 0xf0, /**< No security state machine */
+ HAB_STATE_INITIAL = 0x33, /* Initialising state (transitory) */
+ HAB_STATE_CHECK = 0x55, /* Check state (non-secure) */
+ HAB_STATE_NONSECURE = 0x66, /* Non-secure state */
+ HAB_STATE_TRUSTED = 0x99, /* Trusted state */
+ HAB_STATE_SECURE = 0xaa, /* Secure state */
+ HAB_STATE_FAIL_SOFT = 0xcc, /* Soft fail state */
+ HAB_STATE_FAIL_HARD = 0xff, /* Hard fail state (terminal) */
+ HAB_STATE_NONE = 0xf0, /* No security state machine */
HAB_STATE_MAX
};
+enum hab_reason {
+ HAB_RSN_ANY = 0x00, /* Match any reason */
+ HAB_ENG_FAIL = 0x30, /* Engine failure */
+ HAB_INV_ADDRESS = 0x22, /* Invalid address: access denied */
+ HAB_INV_ASSERTION = 0x0c, /* Invalid assertion */
+ HAB_INV_CALL = 0x28, /* Function called out of sequence */
+ HAB_INV_CERTIFICATE = 0x21, /* Invalid certificate */
+ HAB_INV_COMMAND = 0x06, /* Invalid command: command malformed */
+ HAB_INV_CSF = 0x11, /* Invalid csf */
+ HAB_INV_DCD = 0x27, /* Invalid dcd */
+ HAB_INV_INDEX = 0x0f, /* Invalid index: access denied */
+ HAB_INV_IVT = 0x05, /* Invalid ivt */
+ HAB_INV_KEY = 0x1d, /* Invalid key */
+ HAB_INV_RETURN = 0x1e, /* Failed callback function */
+ HAB_INV_SIGNATURE = 0x18, /* Invalid signature */
+ HAB_INV_SIZE = 0x17, /* Invalid data size */
+ HAB_MEM_FAIL = 0x2e, /* Memory failure */
+ HAB_OVR_COUNT = 0x2b, /* Expired poll count */
+ HAB_OVR_STORAGE = 0x2d, /* Exhausted storage region */
+ HAB_UNS_ALGORITHM = 0x12, /* Unsupported algorithm */
+ HAB_UNS_COMMAND = 0x03, /* Unsupported command */
+ HAB_UNS_ENGINE = 0x0a, /* Unsupported engine */
+ HAB_UNS_ITEM = 0x24, /* Unsupported configuration item */
+ HAB_UNS_KEY = 0x1b, /* Unsupported key type/parameters */
+ HAB_UNS_PROTOCOL = 0x14, /* Unsupported protocol */
+ HAB_UNS_STATE = 0x09, /* Unsuitable state */
+ HAB_RSN_MAX
+};
+
+enum hab_context {
+ HAB_CTX_ANY = 0x00, /* Match any context */
+ HAB_CTX_FAB = 0xff, /* Event logged in hab_fab_test() */
+ HAB_CTX_ENTRY = 0xe1, /* Event logged in hab_rvt.entry() */
+ HAB_CTX_TARGET = 0x33, /* Event logged in hab_rvt.check_target() */
+ HAB_CTX_AUTHENTICATE = 0x0a,/* Logged in hab_rvt.authenticate_image() */
+ HAB_CTX_DCD = 0xdd, /* Event logged in hab_rvt.run_dcd() */
+ HAB_CTX_CSF = 0xcf, /* Event logged in hab_rvt.run_csf() */
+ HAB_CTX_COMMAND = 0xc0, /* Event logged executing csf/dcd command */
+ HAB_CTX_AUT_DAT = 0xdb, /* Authenticated data block */
+ HAB_CTX_ASSERT = 0xa0, /* Event logged in hab_rvt.assert() */
+ HAB_CTX_EXIT = 0xee, /* Event logged in hab_rvt.exit() */
+ HAB_CTX_MAX
+};
+
/*Function prototype description*/
typedef enum hab_status hab_rvt_report_event_t(enum hab_status, uint32_t,
uint8_t* , size_t*);
@@ -53,6 +97,22 @@ typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t,
void **, size_t *, hab_loader_callback_f_t);
typedef void hapi_clock_init_t(void);
+#define HAB_ENG_ANY 0x00 /* Select first compatible engine */
+#define HAB_ENG_SCC 0x03 /* Security controller */
+#define HAB_ENG_RTIC 0x05 /* Run-time integrity checker */
+#define HAB_ENG_SAHARA 0x06 /* Crypto accelerator */
+#define HAB_ENG_CSU 0x0a /* Central Security Unit */
+#define HAB_ENG_SRTC 0x0c /* Secure clock */
+#define HAB_ENG_DCP 0x1b /* Data Co-Processor */
+#define HAB_ENG_CAAM 0x1d /* CAAM */
+#define HAB_ENG_SNVS 0x1e /* Secure Non-Volatile Storage */
+#define HAB_ENG_OCOTP 0x21 /* Fuse controller */
+#define HAB_ENG_DTCP 0x22 /* DTCP co-processor */
+#define HAB_ENG_ROM 0x36 /* Protected ROM area */
+#define HAB_ENG_HDCP 0x24 /* HDCP co-processor */
+#define HAB_ENG_RTL 0x77 /* RTL simulation engine */
+#define HAB_ENG_SW 0xff /* Software engine */
+
#ifdef CONFIG_MX6SX
#define HAB_RVT_BASE 0x00000100
#else
@@ -73,6 +133,7 @@ typedef void hapi_clock_init_t(void);
#define HAB_CID_ROM 0 /**< ROM Caller ID */
#define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/
+
/* ----------- end of HAB API updates ------------*/
#endif
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 35a324cd53..4d84a9b753 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -9,7 +9,11 @@
#define ARCH_MXC
+#ifdef CONFIG_MX6UL
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#else
#define CONFIG_SYS_CACHELINE_SIZE 32
+#endif
#define ROMCP_ARB_BASE_ADDR 0x00000000
#define ROMCP_ARB_END_ADDR 0x000FFFFF
@@ -19,7 +23,7 @@
#define GPU_2D_ARB_END_ADDR 0x02203FFF
#define OPENVG_ARB_BASE_ADDR 0x02204000
#define OPENVG_ARB_END_ADDR 0x02207FFF
-#elif CONFIG_MX6SX
+#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00107FFF
#define GPU_ARB_BASE_ADDR 0x01800000
@@ -28,10 +32,6 @@
#define APBH_DMA_ARB_END_ADDR 0x0180BFFF
#define M4_BOOTROM_BASE_ADDR 0x007F8000
-#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR
-#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000)
-#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
-
#else
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00103FFF
@@ -52,13 +52,13 @@
#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
/* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define GPV2_BASE_ADDR 0x00D00000
#else
#define GPV2_BASE_ADDR 0x00200000
#endif
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define GPV3_BASE_ADDR 0x00E00000
#define GPV4_BASE_ADDR 0x00F00000
#define GPV5_BASE_ADDR 0x01000000
@@ -87,15 +87,21 @@
#define AIPS1_ARB_END_ADDR 0x020FFFFF
#define AIPS2_ARB_BASE_ADDR 0x02100000
#define AIPS2_ARB_END_ADDR 0x021FFFFF
-#ifdef CONFIG_MX6SX
+/* AIPS3 only on i.MX6SX */
#define AIPS3_ARB_BASE_ADDR 0x02200000
#define AIPS3_ARB_END_ADDR 0x022FFFFF
+#ifdef CONFIG_MX6SX
#define WEIM_ARB_BASE_ADDR 0x50000000
#define WEIM_ARB_END_ADDR 0x57FFFFFF
#define QSPI0_AMBA_BASE 0x60000000
#define QSPI0_AMBA_END 0x6FFFFFFF
#define QSPI1_AMBA_BASE 0x70000000
#define QSPI1_AMBA_END 0x7FFFFFFF
+#elif defined(CONFIG_MX6UL)
+#define WEIM_ARB_BASE_ADDR 0x50000000
+#define WEIM_ARB_END_ADDR 0x57FFFFFF
+#define QSPI0_AMBA_BASE 0x60000000
+#define QSPI0_AMBA_END 0x6FFFFFFF
#else
#define SATA_ARB_BASE_ADDR 0x02200000
#define SATA_ARB_END_ADDR 0x02203FFF
@@ -111,7 +117,7 @@
#define WEIM_ARB_END_ADDR 0x0FFFFFFF
#endif
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define MMDC0_ARB_BASE_ADDR 0x80000000
#define MMDC0_ARB_END_ADDR 0xFFFFFFFF
#define MMDC1_ARB_BASE_ADDR 0xC0000000
@@ -238,13 +244,16 @@
#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
-#ifdef CONFIG_MX6SL
+/* i.MX6SL */
#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
-#elif CONFIG_MX6SX
-#define ENET2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#ifdef CONFIG_MX6UL
+#define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000)
#else
-#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+/* i.MX6SX */
+#define ENET2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
#endif
+/* i.MX6DQ/SDL */
+#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
@@ -257,22 +266,21 @@
#define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000)
#endif
#define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000)
-#ifdef CONFIG_MX6SX
+#ifdef CONFIG_MX6UL
+#define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
+#elif defined(CONFIG_MX6SX)
#define SAI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
-#else
-#define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
-#endif
#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000)
-#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000)
-#ifdef CONFIG_MX6SX
#define SAI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000)
#define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
#define QSPI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
#else
+#define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
#define MIPI_CSI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000)
#define MIPI_DSI_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
#define VDOA_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
#endif
+#define MX6UL_WDOG3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
#define UART2_BASE (AIPS2_OFF_BASE_ADDR + 0x68000)
#define UART3_BASE (AIPS2_OFF_BASE_ADDR + 0x6C000)
#define UART4_BASE (AIPS2_OFF_BASE_ADDR + 0x70000)
@@ -296,7 +304,6 @@
#define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000)
#define ADC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000)
#define ADC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000)
-#define WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
#define ECSPI5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x8C000)
#define HS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000)
#define MU_MCU_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000)
@@ -308,12 +315,17 @@
#define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000)
#define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000)
#endif
+#define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
+
+/* only for i.MX6SX/UL */
+#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ? \
+ MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR)
#define CHIP_REV_1_0 0x10
#define CHIP_REV_1_2 0x12
#define CHIP_REV_1_5 0x15
#define CHIP_REV_2_0 0x20
-#ifndef CONFIG_MX6SX
+#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define IRAM_SIZE 0x00040000
#else
#define IRAM_SIZE 0x00020000
@@ -451,7 +463,7 @@ struct src {
struct iomuxc {
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
u8 reserved[0x4000];
#endif
u32 gpr[14];
@@ -577,7 +589,7 @@ struct cspi_regs {
#define MXC_CSPICON_POL 4 /* SCLK polarity */
#define MXC_CSPICON_SSPOL 12 /* SS polarity */
#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL)
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
#define MXC_SPI_BASE_ADDRESSES \
ECSPI1_BASE_ADDR, \
ECSPI2_BASE_ADDR, \
@@ -661,7 +673,7 @@ struct fuse_bank1_regs {
u32 rsvd7[3];
};
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
struct fuse_bank4_regs {
u32 sjc_resp_low;
u32 rsvd0[3];
@@ -674,7 +686,9 @@ struct fuse_bank4_regs {
u32 mac_addr2;
u32 rsvd4[7];
u32 gp1;
- u32 rsvd5[7];
+ u32 rsvd5[3];
+ u32 gp2;
+ u32 rsvd6[3];
};
#else
struct fuse_bank4_regs {
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
index c49aa6290c..7bfbdc3cf9 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -16,7 +16,11 @@
#ifdef CONFIG_MX6SX
#include "mx6sx-ddr.h"
#else
+#ifdef CONFIG_MX6UL
+#include "mx6ul-ddr.h"
+#else
#error "Please select cpu"
+#endif /* CONFIG_MX6UL */
#endif /* CONFIG_MX6SX */
#endif /* CONFIG_MX6DL or CONFIG_MX6S */
#endif /* CONFIG_MX6Q */
@@ -62,6 +66,44 @@ struct mmdc_p_regs {
u32 mpmur0;
};
+#define MX6UL_IOM_DDR_BASE 0x020e0200
+struct mx6ul_iomux_ddr_regs {
+ u32 res1[17];
+ u32 dram_dqm0;
+ u32 dram_dqm1;
+ u32 dram_ras;
+ u32 dram_cas;
+ u32 dram_cs0;
+ u32 dram_cs1;
+ u32 dram_sdwe_b;
+ u32 dram_odt0;
+ u32 dram_odt1;
+ u32 dram_sdba0;
+ u32 dram_sdba1;
+ u32 dram_sdba2;
+ u32 dram_sdcke0;
+ u32 dram_sdcke1;
+ u32 dram_sdclk_0;
+ u32 dram_sdqs0;
+ u32 dram_sdqs1;
+ u32 dram_reset;
+};
+
+#define MX6UL_IOM_GRP_BASE 0x020e0400
+struct mx6ul_iomux_grp_regs {
+ u32 res1[36];
+ u32 grp_addds;
+ u32 grp_ddrmode_ctl;
+ u32 grp_b0ds;
+ u32 grp_ddrpk;
+ u32 grp_ctlds;
+ u32 grp_b1ds;
+ u32 grp_ddrhys;
+ u32 grp_ddrpke;
+ u32 grp_ddrmode;
+ u32 grp_ddr_type;
+};
+
#define MX6SX_IOM_DDR_BASE 0x020e0200
struct mx6sx_iomux_ddr_regs {
u32 res1[59];
@@ -290,6 +332,9 @@ void mx6sdl_dram_iocfg(unsigned width,
void mx6sx_dram_iocfg(unsigned width,
const struct mx6sx_iomux_ddr_regs *,
const struct mx6sx_iomux_grp_regs *);
+void mx6ul_dram_iocfg(unsigned width,
+ const struct mx6ul_iomux_ddr_regs *,
+ const struct mx6ul_iomux_grp_regs *);
/* configure mx6 mmdc registers */
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h
index 534f780be8..4b6bb182c9 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h
@@ -37,6 +37,8 @@ enum {
#include "mx6sl_pins.h"
#elif defined(CONFIG_MX6SX)
#include "mx6sx_pins.h"
+#elif defined(CONFIG_MX6UL)
+#include "mx6ul_pins.h"
#else
#error "Please select cpu"
#endif /* CONFIG_MX6Q */
diff --git a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
new file mode 100644
index 0000000000..ed11c4bb4d
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MX6UL_DDR_H__
+#define __ASM_ARCH_MX6UL_DDR_H__
+
+#ifndef CONFIG_MX6UL
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_DQM0 0x020e0244
+#define MX6_IOM_DRAM_DQM1 0x020e0248
+
+#define MX6_IOM_DRAM_RAS 0x020e024c
+#define MX6_IOM_DRAM_CAS 0x020e0250
+#define MX6_IOM_DRAM_CS0 0x020e0254
+#define MX6_IOM_DRAM_CS1 0x020e0258
+#define MX6_IOM_DRAM_SDWE_B 0x020e025c
+#define MX6_IOM_DRAM_SDODT0 0x020e0260
+#define MX6_IOM_DRAM_SDODT1 0x020e0264
+#define MX6_IOM_DRAM_SDBA0 0x020e0268
+#define MX6_IOM_DRAM_SDBA1 0x020e026c
+#define MX6_IOM_DRAM_SDBA2 0x020e0270
+#define MX6_IOM_DRAM_SDCKE0 0x020e0274
+#define MX6_IOM_DRAM_SDCKE1 0x020e0278
+#define MX6_IOM_DRAM_SDCLK_0 0x020e027c
+#define MX6_IOM_DRAM_SDQS0 0x020e0280
+#define MX6_IOM_DRAM_SDQS1 0x020e0284
+#define MX6_IOM_DRAM_RESET 0x020e0288
+
+#define MX6_IOM_GRP_ADDDS 0x020e0490
+#define MX6_IOM_DDRMODE_CTL 0x020e0494
+#define MX6_IOM_GRP_B0DS 0x020e0498
+#define MX6_IOM_GRP_DDRPK 0x020e049c
+#define MX6_IOM_GRP_CTLDS 0x020e04a0
+#define MX6_IOM_GRP_B1DS 0x020e04a4
+#define MX6_IOM_GRP_DDRHYS 0x020e04a8
+#define MX6_IOM_GRP_DDRPKE 0x020e04ac
+#define MX6_IOM_GRP_DDRMODE 0x020e04b0
+#define MX6_IOM_GRP_DDR_TYPE 0x020e04b4
+
+#endif /*__ASM_ARCH_MX6SX_DDR_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6ul_pins.h b/arch/arm/include/asm/arch-mx6/mx6ul_pins.h
new file mode 100644
index 0000000000..c92b4f0952
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6ul_pins.h
@@ -0,0 +1,1065 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_IMX6UL_PINS_H__
+#define __ASM_ARCH_IMX6UL_PINS_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+enum {
+
+ MX6_PAD_BOOT_MODE0__GPIO5_IO10 = IOMUX_PAD(0x02A0, 0x0014, 5, 0x0000, 0, 0),
+ MX6_PAD_BOOT_MODE1__GPIO5_IO11 = IOMUX_PAD(0x02A4, 0x0018, 5, 0x0000, 0, 0),
+ /*
+ * The TAMPER Pin can be used for GPIO, which depends on
+ * fusemap TAMPER_PIN_DISABLE[1:0] settings.
+ */
+ MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 = IOMUX_PAD(0x02A8, 0x001C, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER1__GPIO5_IO01 = IOMUX_PAD(0x02AC, 0x0020, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 = IOMUX_PAD(0x02B0, 0x0024, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER3__GPIO5_IO03 = IOMUX_PAD(0x02B4, 0x0028, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER4__GPIO5_IO04 = IOMUX_PAD(0x02B8, 0x002C, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER5__GPIO5_IO05 = IOMUX_PAD(0x02BC, 0x0030, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER6__GPIO5_IO06 = IOMUX_PAD(0x02C0, 0x0034, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER7__GPIO5_IO07 = IOMUX_PAD(0x02C4, 0x0038, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER8__GPIO5_IO08 = IOMUX_PAD(0x02C8, 0x003C, 5, 0x0000, 0, 0),
+ MX6_PAD_SNVS_TAMPER9__GPIO5_IO09 = IOMUX_PAD(0x02CC, 0x0040, 5, 0x0000, 0, 0),
+
+ MX6_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x02D0, 0x0044, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_MOD__GPT2_CLK = IOMUX_PAD(0x02D0, 0x0044, 1, 0x05A0, 0, 0),
+ MX6_PAD_JTAG_MOD__SPDIF_OUT = IOMUX_PAD(0x02D0, 0x0044, 2, 0x0000, 0, 0),
+ MX6_PAD_JTAG_MOD__ENET1_REF_CLK_25M = IOMUX_PAD(0x02D0, 0x0044, 3, 0x0000, 0, 0),
+ MX6_PAD_JTAG_MOD__CCM_PMIC_RDY = IOMUX_PAD(0x02D0, 0x0044, 4, 0x04C0, 0, 0),
+ MX6_PAD_JTAG_MOD__GPIO1_IO10 = IOMUX_PAD(0x02D0, 0x0044, 5, 0x0000, 0, 0),
+ MX6_PAD_JTAG_MOD__SDMA_EXT_EVENT00 = IOMUX_PAD(0x02D0, 0x0044, 6, 0x0610, 0, 0),
+
+ MX6_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x02D4, 0x0048, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TMS__GPT2_CAPTURE1 = IOMUX_PAD(0x02D4, 0x0048, 1, 0x0598, 0, 0),
+ MX6_PAD_JTAG_TMS__SAI2_MCLK = IOMUX_PAD(0x02D4, 0x0048, 2, 0x05F0, 0, 0),
+ MX6_PAD_JTAG_TMS__CCM_CLKO1 = IOMUX_PAD(0x02D4, 0x0048, 3, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TMS__CCM_WAIT = IOMUX_PAD(0x02D4, 0x0048, 4, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TMS__GPIO1_IO11 = IOMUX_PAD(0x02D4, 0x0048, 5, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TMS__SDMA_EXT_EVENT01 = IOMUX_PAD(0x02D4, 0x0048, 6, 0x0614, 0, 0),
+ MX6_PAD_JTAG_TMS__EPIT1_OUT = IOMUX_PAD(0x02D4, 0x0048, 8, 0x0000, 0, 0),
+
+ MX6_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x02D8, 0x004C, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__GPT2_CAPTURE2 = IOMUX_PAD(0x02D8, 0x004C, 1, 0x059C, 0, 0),
+ MX6_PAD_JTAG_TDO__SAI2_TX_SYNC = IOMUX_PAD(0x02D8, 0x004C, 2, 0x05FC, 0, 0),
+ MX6_PAD_JTAG_TDO__CCM_CLKO2 = IOMUX_PAD(0x02D8, 0x004C, 3, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__CCM_STOP = IOMUX_PAD(0x02D8, 0x004C, 4, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__GPIO1_IO12 = IOMUX_PAD(0x02D8, 0x004C, 5, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__MQS_RIGHT = IOMUX_PAD(0x02D8, 0x004C, 6, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__EPIT2_OUT = IOMUX_PAD(0x02D8, 0x004C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x02DC, 0x0050, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__GPT2_COMPARE1 = IOMUX_PAD(0x02DC, 0x0050, 1, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__SAI2_TX_BCLK = IOMUX_PAD(0x02DC, 0x0050, 2, 0x05F8, 0, 0),
+ MX6_PAD_JTAG_TDI__PWM6_OUT = IOMUX_PAD(0x02DC, 0x0050, 4, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__GPIO1_IO13 = IOMUX_PAD(0x02DC, 0x0050, 5, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__MQS_LEFT = IOMUX_PAD(0x02DC, 0x0050, 6, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__SIM1_POWER_FAIL = IOMUX_PAD(0x02DC, 0x0050, 8, 0x0000, 0, 0),
+
+ MX6_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x02E0, 0x0054, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TCK__GPT2_COMPARE2 = IOMUX_PAD(0x02E0, 0x0054, 1, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TCK__SAI2_RX_DATA = IOMUX_PAD(0x02E0, 0x0054, 2, 0x05F4, 0, 0),
+ MX6_PAD_JTAG_TCK__PWM7_OUT = IOMUX_PAD(0x02E0, 0x0054, 4, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TCK__GPIO1_IO14 = IOMUX_PAD(0x02E0, 0x0054, 5, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TCK__SIM2_POWER_FAIL = IOMUX_PAD(0x02E0, 0x0054, 8, 0x0000, 0, 0),
+
+ MX6_PAD_JTAG_TRST_B__SJC_TRSTB = IOMUX_PAD(0x02E4, 0x0058, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRST_B__GPT2_COMPARE3 = IOMUX_PAD(0x02E4, 0x0058, 1, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRST_B__SAI2_TX_DATA = IOMUX_PAD(0x02E4, 0x0058, 2, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRST_B__PWM8_OUT = IOMUX_PAD(0x02E4, 0x0058, 4, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRST_B__GPIO1_IO15 = IOMUX_PAD(0x02E4, 0x0058, 5, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS = IOMUX_PAD(0x02E4, 0x0058, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO00__I2C2_SCL = IOMUX_PAD(0x02E8, 0x005C, IOMUX_CONFIG_SION | 0, 0x05AC, 1, 0),
+ MX6_PAD_GPIO1_IO00__GPT1_CAPTURE1 = IOMUX_PAD(0x02E8, 0x005C, 1, 0x058C, 0, 0),
+ MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID = IOMUX_PAD(0x02E8, 0x005C, 2, 0x04B8, 0, 0),
+ MX6_PAD_GPIO1_IO00__ENET1_REF_CLK1 = IOMUX_PAD(0x02E8, 0x005C, 3, 0x0574, 0, 0),
+ MX6_PAD_GPIO1_IO00__MQS_RIGHT = IOMUX_PAD(0x02E8, 0x005C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO00__GPIO1_IO00 = IOMUX_PAD(0x02E8, 0x005C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN = IOMUX_PAD(0x02E8, 0x005C, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO00__SRC_SYSTEM_RESET = IOMUX_PAD(0x02E8, 0x005C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO00__WDOG3_WDOG_B = IOMUX_PAD(0x02E8, 0x005C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO01__I2C2_SDA = IOMUX_PAD(0x02EC, 0x0060, IOMUX_CONFIG_SION | 0, 0x05B0, 1, 0),
+ MX6_PAD_GPIO1_IO01__GPT1_COMPARE1 = IOMUX_PAD(0x02EC, 0x0060, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO01__USB_OTG1_OC = IOMUX_PAD(0x02EC, 0x0060, 2, 0x0664, 0, 0),
+ MX6_PAD_GPIO1_IO01__ENET2_REF_CLK2 = IOMUX_PAD(0x02EC, 0x0060, 3, 0x057C, 0, 0),
+ MX6_PAD_GPIO1_IO01__MQS_LEFT = IOMUX_PAD(0x02EC, 0x0060, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO01__GPIO1_IO01 = IOMUX_PAD(0x02EC, 0x0060, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT = IOMUX_PAD(0x02EC, 0x0060, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO01__SRC_EARLY_RESET = IOMUX_PAD(0x02EC, 0x0060, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO01__WDOG1_WDOG_B = IOMUX_PAD(0x02EC, 0x0060, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO02__I2C1_SCL = IOMUX_PAD(0x02F0, 0x0064, IOMUX_CONFIG_SION | 0, 0x05A4, 0, 0),
+ MX6_PAD_GPIO1_IO02__GPT1_COMPARE2 = IOMUX_PAD(0x02F0, 0x0064, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO02__USB_OTG2_PWR = IOMUX_PAD(0x02F0, 0x0064, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO02__ENET1_REF_CLK_25M = IOMUX_PAD(0x02F0, 0x0064, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO02__USDHC1_WP = IOMUX_PAD(0x02F0, 0x0064, 4, 0x066C, 0, 0),
+ MX6_PAD_GPIO1_IO02__GPIO1_IO02 = IOMUX_PAD(0x02F0, 0x0064, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 = IOMUX_PAD(0x02F0, 0x0064, 6, 0x0610, 1, 0),
+ MX6_PAD_GPIO1_IO02__SRC_ANY_PU_RESET = IOMUX_PAD(0x02F0, 0x0064, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO02__UART1_DCE_TX = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO02__UART1_DTE_RX = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0624, 0, 0),
+
+ MX6_PAD_GPIO1_IO03__I2C1_SDA = IOMUX_PAD(0x02F4, 0x0068, IOMUX_CONFIG_SION | 0, 0x05A8, 1, 0),
+ MX6_PAD_GPIO1_IO03__GPT1_COMPARE3 = IOMUX_PAD(0x02F4, 0x0068, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO03__USB_OTG2_OC = IOMUX_PAD(0x02F4, 0x0068, 2, 0x0660, 0, 0),
+ MX6_PAD_GPIO1_IO03__USDHC1_CD_B = IOMUX_PAD(0x02F4, 0x0068, 4, 0x0668, 0, 0),
+ MX6_PAD_GPIO1_IO03__GPIO1_IO03 = IOMUX_PAD(0x02F4, 0x0068, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK = IOMUX_PAD(0x02F4, 0x0068, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO03__SRC_TESTER_ACK = IOMUX_PAD(0x02F4, 0x0068, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO03__UART1_DCE_RX = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0624, 1, 0),
+ MX6_PAD_GPIO1_IO03__UART1_DTE_TX = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO04__ENET1_REF_CLK1 = IOMUX_PAD(0x02F8, 0x006C, 0, 0x0574, 1, 0),
+ MX6_PAD_GPIO1_IO04__PWM3_OUT = IOMUX_PAD(0x02F8, 0x006C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO04__USB_OTG1_PWR = IOMUX_PAD(0x02F8, 0x006C, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO04__USDHC1_RESET_B = IOMUX_PAD(0x02F8, 0x006C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO04__GPIO1_IO04 = IOMUX_PAD(0x02F8, 0x006C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN = IOMUX_PAD(0x02F8, 0x006C, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO04__UART5_DCE_TX = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO04__UART5_DTE_RX = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0644, 2, 0),
+
+ MX6_PAD_GPIO1_IO05__ENET2_REF_CLK2 = IOMUX_PAD(0x02FC, 0x0070, 0, 0x057C, 1, 0),
+ MX6_PAD_GPIO1_IO05__PWM4_OUT = IOMUX_PAD(0x02FC, 0x0070, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID = IOMUX_PAD(0x02FC, 0x0070, 2, 0x04BC, 0, 0),
+ MX6_PAD_GPIO1_IO05__CSI_FIELD = IOMUX_PAD(0x02FC, 0x0070, 3, 0x0530, 0, 0),
+ MX6_PAD_GPIO1_IO05__USDHC1_VSELECT = IOMUX_PAD(0x02FC, 0x0070, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO05__GPIO1_IO05 = IOMUX_PAD(0x02FC, 0x0070, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT = IOMUX_PAD(0x02FC, 0x0070, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO05__UART5_DCE_RX = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0644, 3, 0),
+ MX6_PAD_GPIO1_IO05__UART5_DTE_TX = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO06__ENET1_MDIO = IOMUX_PAD(0x0300, 0x0074, 0, 0x0578, 0, 0),
+ MX6_PAD_GPIO1_IO06__ENET2_MDIO = IOMUX_PAD(0x0300, 0x0074, 1, 0x0580, 0, 0),
+ MX6_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE = IOMUX_PAD(0x0300, 0x0074, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO06__CSI_MCLK = IOMUX_PAD(0x0300, 0x0074, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO06__USDHC2_WP = IOMUX_PAD(0x0300, 0x0074, 4, 0x069C, 0, 0),
+ MX6_PAD_GPIO1_IO06__GPIO1_IO06 = IOMUX_PAD(0x0300, 0x0074, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO06__CCM_WAIT = IOMUX_PAD(0x0300, 0x0074, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO06__CCM_REF_EN_B = IOMUX_PAD(0x0300, 0x0074, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO06__UART1_DCE_CTS = IOMUX_PAD(0x0300, 0x0074, 8, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO06__UART1_DTE_RTS = IOMUX_PAD(0x0300, 0x0074, 8, 0x0620, 0, 0),
+
+ MX6_PAD_GPIO1_IO07__ENET1_MDC = IOMUX_PAD(0x0304, 0x0078, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO07__ENET2_MDC = IOMUX_PAD(0x0304, 0x0078, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO07__USB_OTG_HOST_MODE = IOMUX_PAD(0x0304, 0x0078, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO07__CSI_PIXCLK = IOMUX_PAD(0x0304, 0x0078, 3, 0x0528, 0, 0),
+ MX6_PAD_GPIO1_IO07__USDHC2_CD_B = IOMUX_PAD(0x0304, 0x0078, 4, 0x0674, 1, 0),
+ MX6_PAD_GPIO1_IO07__GPIO1_IO07 = IOMUX_PAD(0x0304, 0x0078, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO07__CCM_STOP = IOMUX_PAD(0x0304, 0x0078, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO07__UART1_DCE_RTS = IOMUX_PAD(0x0304, 0x0078, 8, 0x0620, 1, 0),
+ MX6_PAD_GPIO1_IO07__UART1_DTE_CTS = IOMUX_PAD(0x0304, 0x0078, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO08__PWM1_OUT = IOMUX_PAD(0x0308, 0x007C, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO08__WDOG1_WDOG_B = IOMUX_PAD(0x0308, 0x007C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO08__SPDIF_OUT = IOMUX_PAD(0x0308, 0x007C, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO08__CSI_VSYNC = IOMUX_PAD(0x0308, 0x007C, 3, 0x052C, 1, 0),
+ MX6_PAD_GPIO1_IO08__USDHC2_VSELECT = IOMUX_PAD(0x0308, 0x007C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO08__GPIO1_IO08 = IOMUX_PAD(0x0308, 0x007C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO08__CCM_PMIC_RDY = IOMUX_PAD(0x0308, 0x007C, 6, 0x04C0, 1, 0),
+ MX6_PAD_GPIO1_IO08__UART5_DCE_RTS = IOMUX_PAD(0x0308, 0x007C, 8, 0x0640, 1, 0),
+ MX6_PAD_GPIO1_IO08__UART5_DTE_CTS = IOMUX_PAD(0x0308, 0x007C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_GPIO1_IO09__PWM2_OUT = IOMUX_PAD(0x030C, 0x0080, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO09__WDOG1_WDOG_ANY = IOMUX_PAD(0x030C, 0x0080, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO09__SPDIF_IN = IOMUX_PAD(0x030C, 0x0080, 2, 0x0618, 0, 0),
+ MX6_PAD_GPIO1_IO09__CSI_HSYNC = IOMUX_PAD(0x030C, 0x0080, 3, 0x0524, 1, 0),
+ MX6_PAD_GPIO1_IO09__USDHC2_RESET_B = IOMUX_PAD(0x030C, 0x0080, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO09__GPIO1_IO09 = IOMUX_PAD(0x030C, 0x0080, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO09__USDHC1_RESET_B = IOMUX_PAD(0x030C, 0x0080, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO09__UART5_DCE_CTS = IOMUX_PAD(0x030C, 0x0080, 8, 0x0000, 0, 0),
+ MX6_PAD_GPIO1_IO09__UART5_DTE_RTS = IOMUX_PAD(0x030C, 0x0080, 8, 0x0640, 2, 0),
+
+ MX6_PAD_UART1_TX_DATA__UART1_DCE_TX = IOMUX_PAD(0x0310, 0x0084, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART1_TX_DATA__UART1_DTE_RX = IOMUX_PAD(0x0310, 0x0084, 0, 0x0624, 2, 0),
+ MX6_PAD_UART1_TX_DATA__ENET1_RDATA02 = IOMUX_PAD(0x0310, 0x0084, 1, 0x0000, 0, 0),
+ MX6_PAD_UART1_TX_DATA__I2C3_SCL = IOMUX_PAD(0x0310, 0x0084, IOMUX_CONFIG_SION | 2, 0x05B4, 0, 0),
+ MX6_PAD_UART1_TX_DATA__CSI_DATA02 = IOMUX_PAD(0x0310, 0x0084, 3, 0x04C4, 1, 0),
+ MX6_PAD_UART1_TX_DATA__GPT1_COMPARE1 = IOMUX_PAD(0x0310, 0x0084, 4, 0x0000, 0, 0),
+ MX6_PAD_UART1_TX_DATA__GPIO1_IO16 = IOMUX_PAD(0x0310, 0x0084, 5, 0x0000, 0, 0),
+ MX6_PAD_UART1_TX_DATA__SPDIF_OUT = IOMUX_PAD(0x0310, 0x0084, 8, 0x0000, 0, 0),
+
+ MX6_PAD_UART1_RX_DATA__UART1_DCE_RX = IOMUX_PAD(0x0314, 0x0088, 0, 0x0624, 3, 0),
+
+ MX6_PAD_UART1_RX_DATA__UART1_DTE_TX = IOMUX_PAD(0x0314, 0x0088, 0, 0x0000, 0, 0),
+ MX6_PAD_UART1_RX_DATA__ENET1_RDATA03 = IOMUX_PAD(0x0314, 0x0088, 1, 0x0000, 0, 0),
+ MX6_PAD_UART1_RX_DATA__I2C3_SDA = IOMUX_PAD(0x0314, 0x0088, IOMUX_CONFIG_SION | 2, 0x05B8, 0, 0),
+ MX6_PAD_UART1_RX_DATA__CSI_DATA03 = IOMUX_PAD(0x0314, 0x0088, 3, 0x04C8, 1, 0),
+ MX6_PAD_UART1_RX_DATA__GPT1_CLK = IOMUX_PAD(0x0314, 0x0088, 4, 0x0594, 0, 0),
+ MX6_PAD_UART1_RX_DATA__GPIO1_IO17 = IOMUX_PAD(0x0314, 0x0088, 5, 0x0000, 0, 0),
+ MX6_PAD_UART1_RX_DATA__SPDIF_IN = IOMUX_PAD(0x0314, 0x0088, 8, 0x0618, 1, 0),
+
+ MX6_PAD_UART1_CTS_B__UART1_DCE_CTS = IOMUX_PAD(0x0318, 0x008C, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART1_CTS_B__UART1_DTE_RTS = IOMUX_PAD(0x0318, 0x008C, 0, 0x0620, 2, 0),
+ MX6_PAD_UART1_CTS_B__ENET1_RX_CLK = IOMUX_PAD(0x0318, 0x008C, 1, 0x0000, 0, 0),
+ MX6_PAD_UART1_CTS_B__USDHC1_WP = IOMUX_PAD(0x0318, 0x008C, 2, 0x066C, 1, 0),
+ MX6_PAD_UART1_CTS_B__CSI_DATA04 = IOMUX_PAD(0x0318, 0x008C, 3, 0x04D8, 0, 0),
+ MX6_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN = IOMUX_PAD(0x0318, 0x008C, 4, 0x0000, 0, 0),
+ MX6_PAD_UART1_CTS_B__GPIO1_IO18 = IOMUX_PAD(0x0318, 0x008C, 5, 0x0000, 0, 0),
+ MX6_PAD_UART1_CTS_B__USDHC2_WP = IOMUX_PAD(0x0318, 0x008C, 8, 0x069C, 1, 0),
+
+ MX6_PAD_UART1_RTS_B__UART1_DCE_RTS = IOMUX_PAD(0x031C, 0x0090, 0, 0x0620, 3, 0),
+
+ MX6_PAD_UART1_RTS_B__UART1_DTE_CTS = IOMUX_PAD(0x031C, 0x0090, 0, 0x0000, 0, 0),
+ MX6_PAD_UART1_RTS_B__ENET1_TX_ER = IOMUX_PAD(0x031C, 0x0090, 1, 0x0000, 0, 0),
+ MX6_PAD_UART1_RTS_B__USDHC1_CD_B = IOMUX_PAD(0x031C, 0x0090, 2, 0x0668, 1, 0),
+ MX6_PAD_UART1_RTS_B__CSI_DATA05 = IOMUX_PAD(0x031C, 0x0090, 3, 0x04CC, 1, 0),
+ MX6_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT = IOMUX_PAD(0x031C, 0x0090, 4, 0x0000, 0, 0),
+ MX6_PAD_UART1_RTS_B__GPIO1_IO19 = IOMUX_PAD(0x031C, 0x0090, 5, 0x0000, 0, 0),
+ MX6_PAD_UART1_RTS_B__USDHC2_CD_B = IOMUX_PAD(0x031C, 0x0090, 8, 0x0674, 2, 0),
+
+ MX6_PAD_UART2_TX_DATA__UART2_DCE_TX = IOMUX_PAD(0x0320, 0x0094, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART2_TX_DATA__UART2_DTE_RX = IOMUX_PAD(0x0320, 0x0094, 0, 0x062C, 0, 0),
+ MX6_PAD_UART2_TX_DATA__ENET1_TDATA02 = IOMUX_PAD(0x0320, 0x0094, 1, 0x0000, 0, 0),
+ MX6_PAD_UART2_TX_DATA__I2C4_SCL = IOMUX_PAD(0x0320, 0x0094, IOMUX_CONFIG_SION | 2, 0x05BC, 0, 0),
+ MX6_PAD_UART2_TX_DATA__CSI_DATA06 = IOMUX_PAD(0x0320, 0x0094, 3, 0x04DC, 0, 0),
+ MX6_PAD_UART2_TX_DATA__GPT1_CAPTURE1 = IOMUX_PAD(0x0320, 0x0094, 4, 0x058C, 1, 0),
+ MX6_PAD_UART2_TX_DATA__GPIO1_IO20 = IOMUX_PAD(0x0320, 0x0094, 5, 0x0000, 0, 0),
+ MX6_PAD_UART2_TX_DATA__ECSPI3_SS0 = IOMUX_PAD(0x0320, 0x0094, 8, 0x0560, 0, 0),
+
+ MX6_PAD_UART2_RX_DATA__UART2_DCE_RX = IOMUX_PAD(0x0324, 0x0098, 0, 0x062C, 1, 0),
+
+ MX6_PAD_UART2_RX_DATA__UART2_DTE_TX = IOMUX_PAD(0x0324, 0x0098, 0, 0x0000, 0, 0),
+ MX6_PAD_UART2_RX_DATA__ENET1_TDATA03 = IOMUX_PAD(0x0324, 0x0098, 1, 0x0000, 0, 0),
+ MX6_PAD_UART2_RX_DATA__I2C4_SDA = IOMUX_PAD(0x0324, 0x0098, IOMUX_CONFIG_SION | 2, 0x05C0, 0, 0),
+ MX6_PAD_UART2_RX_DATA__CSI_DATA07 = IOMUX_PAD(0x0324, 0x0098, 3, 0x04E0, 0, 0),
+ MX6_PAD_UART2_RX_DATA__GPT1_CAPTURE2 = IOMUX_PAD(0x0324, 0x0098, 4, 0x0590, 0, 0),
+ MX6_PAD_UART2_RX_DATA__GPIO1_IO21 = IOMUX_PAD(0x0324, 0x0098, 5, 0x0000, 0, 0),
+ MX6_PAD_UART2_RX_DATA__SJC_DONE = IOMUX_PAD(0x0324, 0x0098, 7, 0x0000, 0, 0),
+ MX6_PAD_UART2_RX_DATA__ECSPI3_SCLK = IOMUX_PAD(0x0324, 0x0098, 8, 0x0554, 0, 0),
+
+ MX6_PAD_UART2_CTS_B__UART2_DCE_CTS = IOMUX_PAD(0x0328, 0x009C, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART2_CTS_B__UART2_DTE_RTS = IOMUX_PAD(0x0328, 0x009C, 0, 0x0628, 0, 0),
+ MX6_PAD_UART2_CTS_B__ENET1_CRS = IOMUX_PAD(0x0328, 0x009C, 1, 0x0000, 0, 0),
+ MX6_PAD_UART2_CTS_B__FLEXCAN2_TX = IOMUX_PAD(0x0328, 0x009C, 2, 0x0000, 0, 0),
+ MX6_PAD_UART2_CTS_B__CSI_DATA08 = IOMUX_PAD(0x0328, 0x009C, 3, 0x04E4, 0, 0),
+ MX6_PAD_UART2_CTS_B__GPT1_COMPARE2 = IOMUX_PAD(0x0328, 0x009C, 4, 0x0000, 0, 0),
+ MX6_PAD_UART2_CTS_B__GPIO1_IO22 = IOMUX_PAD(0x0328, 0x009C, 5, 0x0000, 0, 0),
+ MX6_PAD_UART2_CTS_B__SJC_DE_B = IOMUX_PAD(0x0328, 0x009C, 7, 0x0000, 0, 0),
+ MX6_PAD_UART2_CTS_B__ECSPI3_MOSI = IOMUX_PAD(0x0328, 0x009C, 8, 0x055C, 0, 0),
+
+ MX6_PAD_UART2_RTS_B__UART2_DCE_RTS = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0628, 1, 0),
+
+ MX6_PAD_UART2_RTS_B__UART2_DTE_CTS = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0000, 0, 0),
+ MX6_PAD_UART2_RTS_B__ENET1_COL = IOMUX_PAD(0x032C, 0x00A0, 1, 0x0000, 0, 0),
+ MX6_PAD_UART2_RTS_B__FLEXCAN2_RX = IOMUX_PAD(0x032C, 0x00A0, 2, 0x0588, 0, 0),
+ MX6_PAD_UART2_RTS_B__CSI_DATA09 = IOMUX_PAD(0x032C, 0x00A0, 3, 0x04E8, 0, 0),
+ MX6_PAD_UART2_RTS_B__GPT1_COMPARE3 = IOMUX_PAD(0x032C, 0x00A0, 4, 0x0000, 0, 0),
+ MX6_PAD_UART2_RTS_B__GPIO1_IO23 = IOMUX_PAD(0x032C, 0x00A0, 5, 0x0000, 0, 0),
+ MX6_PAD_UART2_RTS_B__SJC_FAIL = IOMUX_PAD(0x032C, 0x00A0, 7, 0x0000, 0, 0),
+ MX6_PAD_UART2_RTS_B__ECSPI3_MISO = IOMUX_PAD(0x032C, 0x00A0, 8, 0x0558, 0, 0),
+
+ MX6_PAD_UART3_TX_DATA__UART3_DCE_TX = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART3_TX_DATA__UART3_DTE_RX = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0634, 0, 0),
+ MX6_PAD_UART3_TX_DATA__ENET2_RDATA02 = IOMUX_PAD(0x0330, 0x00A4, 1, 0x0000, 0, 0),
+ MX6_PAD_UART3_TX_DATA__SIM1_PORT0_PD = IOMUX_PAD(0x0330, 0x00A4, 2, 0x0000, 0, 0),
+ MX6_PAD_UART3_TX_DATA__CSI_DATA01 = IOMUX_PAD(0x0330, 0x00A4, 3, 0x04D4, 0, 0),
+ MX6_PAD_UART3_TX_DATA__UART2_DCE_CTS = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0000, 0, 0),
+ MX6_PAD_UART3_TX_DATA__UART2_DTE_RTS = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0628, 2, 0),
+ MX6_PAD_UART3_TX_DATA__GPIO1_IO24 = IOMUX_PAD(0x0330, 0x00A4, 5, 0x0000, 0, 0),
+ MX6_PAD_UART3_TX_DATA__SJC_JTAG_ACT = IOMUX_PAD(0x0330, 0x00A4, 7, 0x0000, 0, 0),
+ MX6_PAD_UART3_TX_DATA__ANATOP_OTG1_ID = IOMUX_PAD(0x0330, 0x00A4, 8, 0x04B8, 1, 0),
+
+ MX6_PAD_UART3_RX_DATA__UART3_DCE_RX = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0634, 1, 0),
+
+ MX6_PAD_UART3_RX_DATA__UART3_DTE_TX = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0000, 0, 0),
+ MX6_PAD_UART3_RX_DATA__ENET2_RDATA03 = IOMUX_PAD(0x0334, 0x00A8, 1, 0x0000, 0, 0),
+ MX6_PAD_UART3_RX_DATA__SIM2_PORT0_PD = IOMUX_PAD(0x0334, 0x00A8, 2, 0x0000, 0, 0),
+ MX6_PAD_UART3_RX_DATA__CSI_DATA00 = IOMUX_PAD(0x0334, 0x00A8, 3, 0x04D0, 0, 0),
+ MX6_PAD_UART3_RX_DATA__UART2_DCE_RTS = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0628, 3, 0),
+ MX6_PAD_UART3_RX_DATA__UART2_DTE_CTS = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0000, 0, 0),
+ MX6_PAD_UART3_RX_DATA__GPIO1_IO25 = IOMUX_PAD(0x0334, 0x00A8, 5, 0x0000, 0, 0),
+ MX6_PAD_UART3_RX_DATA__EPIT1_OUT = IOMUX_PAD(0x0334, 0x00A8, 8, 0x0000, 0, 0),
+
+ MX6_PAD_UART3_CTS_B__UART3_DCE_CTS = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART3_CTS_B__UART3_DTE_RTS = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0630, 0, 0),
+ MX6_PAD_UART3_CTS_B__ENET2_RX_CLK = IOMUX_PAD(0x0338, 0x00AC, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
+ MX6_PAD_UART3_CTS_B__FLEXCAN1_TX = IOMUX_PAD(0x0338, 0x00AC, 2, 0x0000, 0, 0),
+ MX6_PAD_UART3_CTS_B__CSI_DATA10 = IOMUX_PAD(0x0338, 0x00AC, 3, 0x04EC, 0, 0),
+ MX6_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN = IOMUX_PAD(0x0338, 0x00AC, 4, 0x0000, 0, 0),
+ MX6_PAD_UART3_CTS_B__GPIO1_IO26 = IOMUX_PAD(0x0338, 0x00AC, 5, 0x0000, 0, 0),
+ MX6_PAD_UART3_CTS_B__EPIT2_OUT = IOMUX_PAD(0x0338, 0x00AC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_UART3_RTS_B__UART3_DCE_RTS = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0630, 1, 0),
+
+ MX6_PAD_UART3_RTS_B__UART3_DTE_CTS = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0000, 0, 0),
+ MX6_PAD_UART3_RTS_B__ENET2_TX_ER = IOMUX_PAD(0x033C, 0x00B0, 1, 0x0000, 0, 0),
+ MX6_PAD_UART3_RTS_B__FLEXCAN1_RX = IOMUX_PAD(0x033C, 0x00B0, 2, 0x0584, 0, 0),
+ MX6_PAD_UART3_RTS_B__CSI_DATA11 = IOMUX_PAD(0x033C, 0x00B0, 3, 0x04F0, 0, 0),
+ MX6_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT = IOMUX_PAD(0x033C, 0x00B0, 4, 0x0000, 0, 0),
+ MX6_PAD_UART3_RTS_B__GPIO1_IO27 = IOMUX_PAD(0x033C, 0x00B0, 5, 0x0000, 0, 0),
+ MX6_PAD_UART3_RTS_B__WDOG1_WDOG_B = IOMUX_PAD(0x033C, 0x00B0, 8, 0x0000, 0, 0),
+
+ MX6_PAD_UART4_TX_DATA__UART4_DCE_TX = IOMUX_PAD(0x0340, 0x00B4, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART4_TX_DATA__UART4_DTE_RX = IOMUX_PAD(0x0340, 0x00B4, 0, 0x063C, 0, 0),
+ MX6_PAD_UART4_TX_DATA__ENET2_TDATA02 = IOMUX_PAD(0x0340, 0x00B4, 1, 0x0000, 0, 0),
+ MX6_PAD_UART4_TX_DATA__I2C1_SCL = IOMUX_PAD(0x0340, 0x00B4, IOMUX_CONFIG_SION | 2, 0x05A4, 1, 0),
+ MX6_PAD_UART4_TX_DATA__CSI_DATA12 = IOMUX_PAD(0x0340, 0x00B4, 3, 0x04F4, 0, 0),
+ MX6_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 = IOMUX_PAD(0x0340, 0x00B4, 4, 0x0000, 0, 0),
+ MX6_PAD_UART4_TX_DATA__GPIO1_IO28 = IOMUX_PAD(0x0340, 0x00B4, 5, 0x0000, 0, 0),
+ MX6_PAD_UART4_TX_DATA__ECSPI2_SCLK = IOMUX_PAD(0x0340, 0x00B4, 8, 0x0544, 1, 0),
+
+ MX6_PAD_UART4_RX_DATA__UART4_DCE_RX = IOMUX_PAD(0x0344, 0x00B8, 0, 0x063C, 1, 0),
+
+ MX6_PAD_UART4_RX_DATA__UART4_DTE_TX = IOMUX_PAD(0x0344, 0x00B8, 0, 0x0000, 0, 0),
+ MX6_PAD_UART4_RX_DATA__ENET2_TDATA03 = IOMUX_PAD(0x0344, 0x00B8, 1, 0x0000, 0, 0),
+ MX6_PAD_UART4_RX_DATA__I2C1_SDA = IOMUX_PAD(0x0344, 0x00B8, IOMUX_CONFIG_SION | 2, 0x05A8, 2, 0),
+ MX6_PAD_UART4_RX_DATA__CSI_DATA13 = IOMUX_PAD(0x0344, 0x00B8, 3, 0x04F8, 0, 0),
+ MX6_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 = IOMUX_PAD(0x0344, 0x00B8, 4, 0x0000, 0, 0),
+ MX6_PAD_UART4_RX_DATA__GPIO1_IO29 = IOMUX_PAD(0x0344, 0x00B8, 5, 0x0000, 0, 0),
+ MX6_PAD_UART4_RX_DATA__ECSPI2_SS0 = IOMUX_PAD(0x0344, 0x00B8, 8, 0x0550, 1, 0),
+ MX6_PAD_UART5_TX_DATA__GPIO1_IO30 = IOMUX_PAD(0x0348, 0x00BC, 5, 0x0000, 0, 0),
+ MX6_PAD_UART5_TX_DATA__ECSPI2_MOSI = IOMUX_PAD(0x0348, 0x00BC, 8, 0x054C, 0, 0),
+
+ MX6_PAD_UART5_TX_DATA__UART5_DCE_TX = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0000, 0, 0),
+
+ MX6_PAD_UART5_TX_DATA__UART5_DTE_RX = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0644, 4, 0),
+ MX6_PAD_UART5_TX_DATA__ENET2_CRS = IOMUX_PAD(0x0348, 0x00BC, 1, 0x0000, 0, 0),
+ MX6_PAD_UART5_TX_DATA__I2C2_SCL = IOMUX_PAD(0x0348, 0x00BC, IOMUX_CONFIG_SION | 2, 0x05AC, 2, 0),
+ MX6_PAD_UART5_TX_DATA__CSI_DATA14 = IOMUX_PAD(0x0348, 0x00BC, 3, 0x04FC, 0, 0),
+ MX6_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 = IOMUX_PAD(0x0348, 0x00BC, 4, 0x0000, 0, 0),
+
+ MX6_PAD_UART5_RX_DATA__UART5_DCE_RX = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0644, 5, 0),
+
+ MX6_PAD_UART5_RX_DATA__UART5_DTE_TX = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0000, 0, 0),
+ MX6_PAD_UART5_RX_DATA__ENET2_COL = IOMUX_PAD(0x034C, 0x00C0, 1, 0x0000, 0, 0),
+ MX6_PAD_UART5_RX_DATA__I2C2_SDA = IOMUX_PAD(0x034C, 0x00C0, IOMUX_CONFIG_SION | 2, 0x05B0, 2, 0),
+ MX6_PAD_UART5_RX_DATA__CSI_DATA15 = IOMUX_PAD(0x034C, 0x00C0, 3, 0x0500, 0, 0),
+ MX6_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB = IOMUX_PAD(0x034C, 0x00C0, 4, 0x0000, 0, 0),
+ MX6_PAD_UART5_RX_DATA__GPIO1_IO31 = IOMUX_PAD(0x034C, 0x00C0, 5, 0x0000, 0, 0),
+ MX6_PAD_UART5_RX_DATA__ECSPI2_MISO = IOMUX_PAD(0x034C, 0x00C0, 8, 0x0548, 1, 0),
+
+ MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 = IOMUX_PAD(0x0350, 0x00C4, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__UART4_DCE_RTS = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0638, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__UART4_DTE_CTS = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__PWM1_OUT = IOMUX_PAD(0x0350, 0x00C4, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__CSI_DATA16 = IOMUX_PAD(0x0350, 0x00C4, 3, 0x0504, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__FLEXCAN1_TX = IOMUX_PAD(0x0350, 0x00C4, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__GPIO2_IO00 = IOMUX_PAD(0x0350, 0x00C4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__KPP_ROW00 = IOMUX_PAD(0x0350, 0x00C4, 6, 0x05D0, 0, 0),
+ MX6_PAD_ENET1_RX_DATA0__USDHC1_LCTL = IOMUX_PAD(0x0350, 0x00C4, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 = IOMUX_PAD(0x0354, 0x00C8, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA1__UART4_DCE_CTS = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA1__UART4_DTE_RTS = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0638, 1, 0),
+ MX6_PAD_ENET1_RX_DATA1__PWM2_OUT = IOMUX_PAD(0x0354, 0x00C8, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA1__CSI_DATA17 = IOMUX_PAD(0x0354, 0x00C8, 3, 0x0508, 0, 0),
+ MX6_PAD_ENET1_RX_DATA1__FLEXCAN1_RX = IOMUX_PAD(0x0354, 0x00C8, 4, 0x0584, 1, 0),
+ MX6_PAD_ENET1_RX_DATA1__GPIO2_IO01 = IOMUX_PAD(0x0354, 0x00C8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_DATA1__KPP_COL00 = IOMUX_PAD(0x0354, 0x00C8, 6, 0x05C4, 0, 0),
+ MX6_PAD_ENET1_RX_DATA1__USDHC2_LCTL = IOMUX_PAD(0x0354, 0x00C8, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET1_RX_EN__ENET1_RX_EN = IOMUX_PAD(0x0358, 0x00CC, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_EN__UART5_DCE_RTS = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0640, 3, 0),
+ MX6_PAD_ENET1_RX_EN__UART5_DTE_CTS = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_EN__CSI_DATA18 = IOMUX_PAD(0x0358, 0x00CC, 3, 0x050C, 0, 0),
+ MX6_PAD_ENET1_RX_EN__FLEXCAN2_TX = IOMUX_PAD(0x0358, 0x00CC, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_EN__GPIO2_IO02 = IOMUX_PAD(0x0358, 0x00CC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_EN__KPP_ROW01 = IOMUX_PAD(0x0358, 0x00CC, 6, 0x05D4, 0, 0),
+ MX6_PAD_ENET1_RX_EN__USDHC1_VSELECT = IOMUX_PAD(0x0358, 0x00CC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 = IOMUX_PAD(0x035C, 0x00D0, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA0__UART5_DCE_CTS = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA0__UART5_DTE_RTS = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0640, 4, 0),
+ MX6_PAD_ENET1_TX_DATA0__CSI_DATA19 = IOMUX_PAD(0x035C, 0x00D0, 3, 0x0510, 0, 0),
+ MX6_PAD_ENET1_TX_DATA0__FLEXCAN2_RX = IOMUX_PAD(0x035C, 0x00D0, 4, 0x0588, 1, 0),
+ MX6_PAD_ENET1_TX_DATA0__GPIO2_IO03 = IOMUX_PAD(0x035C, 0x00D0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA0__KPP_COL01 = IOMUX_PAD(0x035C, 0x00D0, 6, 0x05C8, 0, 0),
+ MX6_PAD_ENET1_TX_DATA0__USDHC2_VSELECT = IOMUX_PAD(0x035C, 0x00D0, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 = IOMUX_PAD(0x0360, 0x00D4, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA1__UART6_DCE_CTS = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA1__UART6_DTE_RTS = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0648, 2, 0),
+ MX6_PAD_ENET1_TX_DATA1__PWM5_OUT = IOMUX_PAD(0x0360, 0x00D4, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA1__CSI_DATA20 = IOMUX_PAD(0x0360, 0x00D4, 3, 0x0514, 0, 0),
+ MX6_PAD_ENET1_TX_DATA1__ENET2_MDIO = IOMUX_PAD(0x0360, 0x00D4, 4, 0x0580, 1, 0),
+ MX6_PAD_ENET1_TX_DATA1__GPIO2_IO04 = IOMUX_PAD(0x0360, 0x00D4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_DATA1__KPP_ROW02 = IOMUX_PAD(0x0360, 0x00D4, 6, 0x05D8, 0, 0),
+ MX6_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0360, 0x00D4, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET1_TX_EN__ENET1_TX_EN = IOMUX_PAD(0x0364, 0x00D8, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_EN__UART6_DCE_RTS = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0648, 3, 0),
+ MX6_PAD_ENET1_TX_EN__UART6_DTE_CTS = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_EN__PWM6_OUT = IOMUX_PAD(0x0364, 0x00D8, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_EN__CSI_DATA21 = IOMUX_PAD(0x0364, 0x00D8, 3, 0x0518, 0, 0),
+ MX6_PAD_ENET1_TX_EN__ENET2_MDC = IOMUX_PAD(0x0364, 0x00D8, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_EN__GPIO2_IO05 = IOMUX_PAD(0x0364, 0x00D8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_EN__KPP_COL02 = IOMUX_PAD(0x0364, 0x00D8, 6, 0x05CC, 0, 0),
+ MX6_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x0364, 0x00D8, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK = IOMUX_PAD(0x0368, 0x00DC, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__UART7_DCE_CTS = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__UART7_DTE_RTS = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0650, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__PWM7_OUT = IOMUX_PAD(0x0368, 0x00DC, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__CSI_DATA22 = IOMUX_PAD(0x0368, 0x00DC, 3, 0x051C, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 = IOMUX_PAD(0x0368, 0x00DC, IOMUX_CONFIG_SION | 4, 0x0574, 2, 0),
+ MX6_PAD_ENET1_TX_CLK__GPIO2_IO06 = IOMUX_PAD(0x0368, 0x00DC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__KPP_ROW03 = IOMUX_PAD(0x0368, 0x00DC, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET1_TX_CLK__GPT1_CLK = IOMUX_PAD(0x0368, 0x00DC, 8, 0x0594, 1, 0),
+
+ MX6_PAD_ENET1_RX_ER__ENET1_RX_ER = IOMUX_PAD(0x036C, 0x00E0, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_ER__UART7_DCE_RTS = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0650, 1, 0),
+ MX6_PAD_ENET1_RX_ER__UART7_DTE_CTS = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_ER__PWM8_OUT = IOMUX_PAD(0x036C, 0x00E0, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_ER__CSI_DATA23 = IOMUX_PAD(0x036C, 0x00E0, 3, 0x0520, 0, 0),
+ MX6_PAD_ENET1_RX_ER__EIM_CRE = IOMUX_PAD(0x036C, 0x00E0, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_ER__GPIO2_IO07 = IOMUX_PAD(0x036C, 0x00E0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_ER__KPP_COL03 = IOMUX_PAD(0x036C, 0x00E0, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET1_RX_ER__GPT1_CAPTURE2 = IOMUX_PAD(0x036C, 0x00E0, 8, 0x0590, 1, 0),
+
+ MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 = IOMUX_PAD(0x0370, 0x00E4, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA0__UART6_DCE_TX = IOMUX_PAD(0x0370, 0x00E4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA0__UART6_DTE_RX = IOMUX_PAD(0x0370, 0x00E4, 1, 0x064C, 1, 0),
+ MX6_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD = IOMUX_PAD(0x0370, 0x00E4, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA0__I2C3_SCL = IOMUX_PAD(0x0370, 0x00E4, IOMUX_CONFIG_SION | 3, 0x05B4, 1, 0),
+ MX6_PAD_ENET2_RX_DATA0__ENET1_MDIO = IOMUX_PAD(0x0370, 0x00E4, 4, 0x0578, 1, 0),
+ MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08 = IOMUX_PAD(0x0370, 0x00E4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA0__KPP_ROW04 = IOMUX_PAD(0x0370, 0x00E4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA0__USB_OTG1_PWR = IOMUX_PAD(0x0370, 0x00E4, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 = IOMUX_PAD(0x0374, 0x00E8, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA1__UART6_DCE_RX = IOMUX_PAD(0x0374, 0x00E8, 1, 0x064C, 2, 0),
+ MX6_PAD_ENET2_RX_DATA1__UART6_DTE_TX = IOMUX_PAD(0x0374, 0x00E8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK = IOMUX_PAD(0x0374, 0x00E8, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA1__I2C3_SDA = IOMUX_PAD(0x0374, 0x00E8, IOMUX_CONFIG_SION | 3, 0x05B8, 1, 0),
+ MX6_PAD_ENET2_RX_DATA1__ENET1_MDC = IOMUX_PAD(0x0374, 0x00E8, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09 = IOMUX_PAD(0x0374, 0x00E8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA1__KPP_COL04 = IOMUX_PAD(0x0374, 0x00E8, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_DATA1__USB_OTG1_OC = IOMUX_PAD(0x0374, 0x00E8, 8, 0x0664, 1, 0),
+
+ MX6_PAD_ENET2_RX_EN__ENET2_RX_EN = IOMUX_PAD(0x0378, 0x00EC, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_EN__UART7_DCE_TX = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_EN__UART7_DTE_RX = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0654, 0, 0),
+ MX6_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B = IOMUX_PAD(0x0378, 0x00EC, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_EN__I2C4_SCL = IOMUX_PAD(0x0378, 0x00EC, IOMUX_CONFIG_SION | 3, 0x05BC, 1, 0),
+ MX6_PAD_ENET2_RX_EN__EIM_ADDR26 = IOMUX_PAD(0x0378, 0x00EC, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_EN__GPIO2_IO10 = IOMUX_PAD(0x0378, 0x00EC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_EN__KPP_ROW05 = IOMUX_PAD(0x0378, 0x00EC, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M = IOMUX_PAD(0x0378, 0x00EC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 = IOMUX_PAD(0x037C, 0x00F0, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0654, 1, 0),
+ MX6_PAD_ENET2_TX_DATA0__UART7_DTE_TX = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN = IOMUX_PAD(0x037C, 0x00F0, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA0__I2C4_SDA = IOMUX_PAD(0x037C, 0x00F0, IOMUX_CONFIG_SION | 3, 0x05C0, 1, 0),
+ MX6_PAD_ENET2_TX_DATA0__EIM_EB_B02 = IOMUX_PAD(0x037C, 0x00F0, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11 = IOMUX_PAD(0x037C, 0x00F0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA0__KPP_COL05 = IOMUX_PAD(0x037C, 0x00F0, 6, 0x0000, 0, 0),
+
+ MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 = IOMUX_PAD(0x0380, 0x00F4, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX = IOMUX_PAD(0x0380, 0x00F4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__UART8_DTE_RX = IOMUX_PAD(0x0380, 0x00F4, 1, 0x065C, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD = IOMUX_PAD(0x0380, 0x00F4, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__ECSPI4_SCLK = IOMUX_PAD(0x0380, 0x00F4, 3, 0x0564, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__EIM_EB_B03 = IOMUX_PAD(0x0380, 0x00F4, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12 = IOMUX_PAD(0x0380, 0x00F4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__KPP_ROW06 = IOMUX_PAD(0x0380, 0x00F4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_DATA1__USB_OTG2_PWR = IOMUX_PAD(0x0380, 0x00F4, 8, 0x0000, 0, 0),
+
+ MX6_PAD_ENET2_TX_EN__ENET2_TX_EN = IOMUX_PAD(0x0384, 0x00F8, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_EN__UART8_DCE_RX = IOMUX_PAD(0x0384, 0x00F8, 1, 0x065C, 1, 0),
+ MX6_PAD_ENET2_TX_EN__UART8_DTE_TX = IOMUX_PAD(0x0384, 0x00F8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_EN__SIM2_PORT0_CLK = IOMUX_PAD(0x0384, 0x00F8, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_EN__ECSPI4_MOSI = IOMUX_PAD(0x0384, 0x00F8, 3, 0x056C, 0, 0),
+ MX6_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN = IOMUX_PAD(0x0384, 0x00F8, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_EN__GPIO2_IO13 = IOMUX_PAD(0x0384, 0x00F8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_EN__KPP_COL06 = IOMUX_PAD(0x0384, 0x00F8, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_EN__USB_OTG2_OC = IOMUX_PAD(0x0384, 0x00F8, 8, 0x0660, 1, 0),
+
+ MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__UART8_DTE_RTS = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0658, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B = IOMUX_PAD(0x0388, 0x00FC, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__ECSPI4_MISO = IOMUX_PAD(0x0388, 0x00FC, 3, 0x0568, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 4, 0x057C, 2, 0),
+ MX6_PAD_ENET2_TX_CLK__GPIO2_IO14 = IOMUX_PAD(0x0388, 0x00FC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__KPP_ROW07 = IOMUX_PAD(0x0388, 0x00FC, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID = IOMUX_PAD(0x0388, 0x00FC, 8, 0x04BC, 1, 0),
+
+ MX6_PAD_ENET2_RX_ER__ENET2_RX_ER = IOMUX_PAD(0x038C, 0x0100, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS = IOMUX_PAD(0x038C, 0x0100, 1, 0x0658, 1, 0),
+ MX6_PAD_ENET2_RX_ER__UART8_DTE_CTS = IOMUX_PAD(0x038C, 0x0100, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN = IOMUX_PAD(0x038C, 0x0100, 2, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_ER__ECSPI4_SS0 = IOMUX_PAD(0x038C, 0x0100, 3, 0x0570, 0, 0),
+ MX6_PAD_ENET2_RX_ER__EIM_ADDR25 = IOMUX_PAD(0x038C, 0x0100, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_ER__GPIO2_IO15 = IOMUX_PAD(0x038C, 0x0100, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_ER__KPP_COL07 = IOMUX_PAD(0x038C, 0x0100, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY = IOMUX_PAD(0x038C, 0x0100, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_CLK__LCDIF_CLK = IOMUX_PAD(0x0390, 0x0104, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__LCDIF_WR_RWN = IOMUX_PAD(0x0390, 0x0104, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__UART4_DCE_TX = IOMUX_PAD(0x0390, 0x0104, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__UART4_DTE_RX = IOMUX_PAD(0x0390, 0x0104, 2, 0x063C, 2, 0),
+ MX6_PAD_LCD_CLK__SAI3_MCLK = IOMUX_PAD(0x0390, 0x0104, 3, 0x0600, 0, 0),
+ MX6_PAD_LCD_CLK__EIM_CS2_B = IOMUX_PAD(0x0390, 0x0104, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__GPIO3_IO00 = IOMUX_PAD(0x0390, 0x0104, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0390, 0x0104, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_ENABLE__LCDIF_ENABLE = IOMUX_PAD(0x0394, 0x0108, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__LCDIF_RD_E = IOMUX_PAD(0x0394, 0x0108, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__UART4_DCE_RX = IOMUX_PAD(0x0394, 0x0108, 2, 0x063C, 3, 0),
+ MX6_PAD_LCD_ENABLE__UART4_DTE_TX = IOMUX_PAD(0x0394, 0x0108, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__SAI3_TX_SYNC = IOMUX_PAD(0x0394, 0x0108, 3, 0x060C, 0, 0),
+ MX6_PAD_LCD_ENABLE__EIM_CS3_B = IOMUX_PAD(0x0394, 0x0108, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__GPIO3_IO01 = IOMUX_PAD(0x0394, 0x0108, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_ENABLE__ECSPI2_RDY = IOMUX_PAD(0x0394, 0x0108, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_HSYNC__LCDIF_HSYNC = IOMUX_PAD(0x0398, 0x010C, 0, 0x05DC, 0, 0),
+ MX6_PAD_LCD_HSYNC__LCDIF_RS = IOMUX_PAD(0x0398, 0x010C, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__UART4_DCE_CTS = IOMUX_PAD(0x0398, 0x010C, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__UART4_DTE_RTS = IOMUX_PAD(0x0398, 0x010C, 2, 0x0638, 2, 0),
+ MX6_PAD_LCD_HSYNC__SAI3_TX_BCLK = IOMUX_PAD(0x0398, 0x010C, 3, 0x0608, 0, 0),
+ MX6_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB = IOMUX_PAD(0x0398, 0x010C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__GPIO3_IO02 = IOMUX_PAD(0x0398, 0x010C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_HSYNC__ECSPI2_SS1 = IOMUX_PAD(0x0398, 0x010C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_VSYNC__LCDIF_VSYNC = IOMUX_PAD(0x039C, 0x0110, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__LCDIF_BUSY = IOMUX_PAD(0x039C, 0x0110, 1, 0x05DC, 1, 0),
+ MX6_PAD_LCD_VSYNC__UART4_DCE_RTS = IOMUX_PAD(0x039C, 0x0110, 2, 0x0638, 3, 0),
+ MX6_PAD_LCD_VSYNC__UART4_DTE_CTS = IOMUX_PAD(0x039C, 0x0110, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__SAI3_RX_DATA = IOMUX_PAD(0x039C, 0x0110, 3, 0x0604, 0, 0),
+ MX6_PAD_LCD_VSYNC__WDOG2_WDOG_B = IOMUX_PAD(0x039C, 0x0110, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__GPIO3_IO03 = IOMUX_PAD(0x039C, 0x0110, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_VSYNC__ECSPI2_SS2 = IOMUX_PAD(0x039C, 0x0110, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_RESET__LCDIF_RESET = IOMUX_PAD(0x03A0, 0x0114, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__LCDIF_CS = IOMUX_PAD(0x03A0, 0x0114, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__CA7_MX6UL_EVENTI = IOMUX_PAD(0x03A0, 0x0114, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__SAI3_TX_DATA = IOMUX_PAD(0x03A0, 0x0114, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__WDOG1_WDOG_ANY = IOMUX_PAD(0x03A0, 0x0114, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__GPIO3_IO04 = IOMUX_PAD(0x03A0, 0x0114, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_RESET__ECSPI2_SS3 = IOMUX_PAD(0x03A0, 0x0114, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA00__LCDIF_DATA00 = IOMUX_PAD(0x03A4, 0x0118, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__PWM1_OUT = IOMUX_PAD(0x03A4, 0x0118, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN = IOMUX_PAD(0x03A4, 0x0118, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__I2C3_SDA = IOMUX_PAD(0x03A4, 0x0118, IOMUX_CONFIG_SION | 4, 0x05B8, 2, 0),
+ MX6_PAD_LCD_DATA00__GPIO3_IO05 = IOMUX_PAD(0x03A4, 0x0118, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__SRC_BT_CFG00 = IOMUX_PAD(0x03A4, 0x0118, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA00__SAI1_MCLK = IOMUX_PAD(0x03A4, 0x0118, 8, 0x05E0, 1, 0),
+
+ MX6_PAD_LCD_DATA01__LCDIF_DATA01 = IOMUX_PAD(0x03A8, 0x011C, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__PWM2_OUT = IOMUX_PAD(0x03A8, 0x011C, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT = IOMUX_PAD(0x03A8, 0x011C, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__I2C3_SCL = IOMUX_PAD(0x03A8, 0x011C, IOMUX_CONFIG_SION | 4, 0x05B4, 2, 0),
+ MX6_PAD_LCD_DATA01__GPIO3_IO06 = IOMUX_PAD(0x03A8, 0x011C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__SRC_BT_CFG01 = IOMUX_PAD(0x03A8, 0x011C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA01__SAI1_TX_SYNC = IOMUX_PAD(0x03A8, 0x011C, 8, 0x05EC, 0, 0),
+
+ MX6_PAD_LCD_DATA02__LCDIF_DATA02 = IOMUX_PAD(0x03AC, 0x0120, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__PWM3_OUT = IOMUX_PAD(0x03AC, 0x0120, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN = IOMUX_PAD(0x03AC, 0x0120, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__I2C4_SDA = IOMUX_PAD(0x03AC, 0x0120, IOMUX_CONFIG_SION | 4, 0x05C0, 2, 0),
+ MX6_PAD_LCD_DATA02__GPIO3_IO07 = IOMUX_PAD(0x03AC, 0x0120, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__SRC_BT_CFG02 = IOMUX_PAD(0x03AC, 0x0120, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA02__SAI1_TX_BCLK = IOMUX_PAD(0x03AC, 0x0120, 8, 0x05E8, 0, 0),
+
+ MX6_PAD_LCD_DATA03__LCDIF_DATA03 = IOMUX_PAD(0x03B0, 0x0124, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__PWM4_OUT = IOMUX_PAD(0x03B0, 0x0124, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT = IOMUX_PAD(0x03B0, 0x0124, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__I2C4_SCL = IOMUX_PAD(0x03B0, 0x0124, IOMUX_CONFIG_SION | 4, 0x05BC, 2, 0),
+ MX6_PAD_LCD_DATA03__GPIO3_IO08 = IOMUX_PAD(0x03B0, 0x0124, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__SRC_BT_CFG03 = IOMUX_PAD(0x03B0, 0x0124, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA03__SAI1_RX_DATA = IOMUX_PAD(0x03B0, 0x0124, 8, 0x05E4, 0, 0),
+
+ MX6_PAD_LCD_DATA04__LCDIF_DATA04 = IOMUX_PAD(0x03B4, 0x0128, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__UART8_DCE_CTS = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__UART8_DTE_RTS = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0658, 2, 0),
+ MX6_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN = IOMUX_PAD(0x03B4, 0x0128, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__SPDIF_SR_CLK = IOMUX_PAD(0x03B4, 0x0128, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__GPIO3_IO09 = IOMUX_PAD(0x03B4, 0x0128, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__SRC_BT_CFG04 = IOMUX_PAD(0x03B4, 0x0128, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA04__SAI1_TX_DATA = IOMUX_PAD(0x03B4, 0x0128, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA05__LCDIF_DATA05 = IOMUX_PAD(0x03B8, 0x012C, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__UART8_DCE_RTS = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0658, 3, 0),
+ MX6_PAD_LCD_DATA05__UART8_DTE_CTS = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT = IOMUX_PAD(0x03B8, 0x012C, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__SPDIF_OUT = IOMUX_PAD(0x03B8, 0x012C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__GPIO3_IO10 = IOMUX_PAD(0x03B8, 0x012C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__SRC_BT_CFG05 = IOMUX_PAD(0x03B8, 0x012C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA05__ECSPI1_SS1 = IOMUX_PAD(0x03B8, 0x012C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA06__LCDIF_DATA06 = IOMUX_PAD(0x03BC, 0x0130, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__UART7_DCE_CTS = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__UART7_DTE_RTS = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0650, 2, 0),
+ MX6_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN = IOMUX_PAD(0x03BC, 0x0130, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__SPDIF_LOCK = IOMUX_PAD(0x03BC, 0x0130, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__GPIO3_IO11 = IOMUX_PAD(0x03BC, 0x0130, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__SRC_BT_CFG06 = IOMUX_PAD(0x03BC, 0x0130, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA06__ECSPI1_SS2 = IOMUX_PAD(0x03BC, 0x0130, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA07__LCDIF_DATA07 = IOMUX_PAD(0x03C0, 0x0134, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__UART7_DCE_RTS = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0650, 3, 0),
+ MX6_PAD_LCD_DATA07__UART7_DTE_CTS = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT = IOMUX_PAD(0x03C0, 0x0134, 3, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__SPDIF_EXT_CLK = IOMUX_PAD(0x03C0, 0x0134, 4, 0x061C, 0, 0),
+ MX6_PAD_LCD_DATA07__GPIO3_IO12 = IOMUX_PAD(0x03C0, 0x0134, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__SRC_BT_CFG07 = IOMUX_PAD(0x03C0, 0x0134, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA07__ECSPI1_SS3 = IOMUX_PAD(0x03C0, 0x0134, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA08__LCDIF_DATA08 = IOMUX_PAD(0x03C4, 0x0138, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA08__SPDIF_IN = IOMUX_PAD(0x03C4, 0x0138, 1, 0x0618, 2, 0),
+ MX6_PAD_LCD_DATA08__CSI_DATA16 = IOMUX_PAD(0x03C4, 0x0138, 3, 0x0504, 1, 0),
+ MX6_PAD_LCD_DATA08__EIM_DATA00 = IOMUX_PAD(0x03C4, 0x0138, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA08__GPIO3_IO13 = IOMUX_PAD(0x03C4, 0x0138, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA08__SRC_BT_CFG08 = IOMUX_PAD(0x03C4, 0x0138, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA08__FLEXCAN1_TX = IOMUX_PAD(0x03C4, 0x0138, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA09__LCDIF_DATA09 = IOMUX_PAD(0x03C8, 0x013C, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA09__SAI3_MCLK = IOMUX_PAD(0x03C8, 0x013C, 1, 0x0600, 1, 0),
+ MX6_PAD_LCD_DATA09__CSI_DATA17 = IOMUX_PAD(0x03C8, 0x013C, 3, 0x0508, 1, 0),
+ MX6_PAD_LCD_DATA09__EIM_DATA01 = IOMUX_PAD(0x03C8, 0x013C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA09__GPIO3_IO14 = IOMUX_PAD(0x03C8, 0x013C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA09__SRC_BT_CFG09 = IOMUX_PAD(0x03C8, 0x013C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA09__FLEXCAN1_RX = IOMUX_PAD(0x03C8, 0x013C, 8, 0x0584, 2, 0),
+
+ MX6_PAD_LCD_DATA10__LCDIF_DATA10 = IOMUX_PAD(0x03CC, 0x0140, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__SAI3_RX_SYNC = IOMUX_PAD(0x03CC, 0x0140, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__CSI_DATA18 = IOMUX_PAD(0x03CC, 0x0140, 3, 0x050C, 1, 0),
+ MX6_PAD_LCD_DATA10__EIM_DATA02 = IOMUX_PAD(0x03CC, 0x0140, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__GPIO3_IO15 = IOMUX_PAD(0x03CC, 0x0140, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__SRC_BT_CFG10 = IOMUX_PAD(0x03CC, 0x0140, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA10__FLEXCAN2_TX = IOMUX_PAD(0x03CC, 0x0140, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA11__LCDIF_DATA11 = IOMUX_PAD(0x03D0, 0x0144, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__SAI3_RX_BCLK = IOMUX_PAD(0x03D0, 0x0144, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__CSI_DATA19 = IOMUX_PAD(0x03D0, 0x0144, 3, 0x0510, 1, 0),
+ MX6_PAD_LCD_DATA11__EIM_DATA03 = IOMUX_PAD(0x03D0, 0x0144, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__GPIO3_IO16 = IOMUX_PAD(0x03D0, 0x0144, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__SRC_BT_CFG11 = IOMUX_PAD(0x03D0, 0x0144, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA11__FLEXCAN2_RX = IOMUX_PAD(0x03D0, 0x0144, 8, 0x0588, 2, 0),
+
+ MX6_PAD_LCD_DATA12__LCDIF_DATA12 = IOMUX_PAD(0x03D4, 0x0148, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__SAI3_TX_SYNC = IOMUX_PAD(0x03D4, 0x0148, 1, 0x060C, 1, 0),
+ MX6_PAD_LCD_DATA12__CSI_DATA20 = IOMUX_PAD(0x03D4, 0x0148, 3, 0x0514, 1, 0),
+ MX6_PAD_LCD_DATA12__EIM_DATA04 = IOMUX_PAD(0x03D4, 0x0148, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__GPIO3_IO17 = IOMUX_PAD(0x03D4, 0x0148, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__SRC_BT_CFG12 = IOMUX_PAD(0x03D4, 0x0148, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA12__ECSPI1_RDY = IOMUX_PAD(0x03D4, 0x0148, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA13__LCDIF_DATA13 = IOMUX_PAD(0x03D8, 0x014C, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__SAI3_TX_BCLK = IOMUX_PAD(0x03D8, 0x014C, 1, 0x0608, 1, 0),
+ MX6_PAD_LCD_DATA13__CSI_DATA21 = IOMUX_PAD(0x03D8, 0x014C, 3, 0x0518, 1, 0),
+ MX6_PAD_LCD_DATA13__EIM_DATA05 = IOMUX_PAD(0x03D8, 0x014C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__GPIO3_IO18 = IOMUX_PAD(0x03D8, 0x014C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__SRC_BT_CFG13 = IOMUX_PAD(0x03D8, 0x014C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA13__USDHC2_RESET_B = IOMUX_PAD(0x03D8, 0x014C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_LCD_DATA14__LCDIF_DATA14 = IOMUX_PAD(0x03DC, 0x0150, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__SAI3_RX_DATA = IOMUX_PAD(0x03DC, 0x0150, 1, 0x0604, 1, 0),
+ MX6_PAD_LCD_DATA14__CSI_DATA22 = IOMUX_PAD(0x03DC, 0x0150, 3, 0x051C, 1, 0),
+ MX6_PAD_LCD_DATA14__EIM_DATA06 = IOMUX_PAD(0x03DC, 0x0150, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__GPIO3_IO19 = IOMUX_PAD(0x03DC, 0x0150, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__SRC_BT_CFG14 = IOMUX_PAD(0x03DC, 0x0150, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA14__USDHC2_DATA4 = IOMUX_PAD(0x03DC, 0x0150, 8, 0x068C, 0, 0),
+
+ MX6_PAD_LCD_DATA15__LCDIF_DATA15 = IOMUX_PAD(0x03E0, 0x0154, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__SAI3_TX_DATA = IOMUX_PAD(0x03E0, 0x0154, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__CSI_DATA23 = IOMUX_PAD(0x03E0, 0x0154, 3, 0x0520, 1, 0),
+ MX6_PAD_LCD_DATA15__EIM_DATA07 = IOMUX_PAD(0x03E0, 0x0154, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__GPIO3_IO20 = IOMUX_PAD(0x03E0, 0x0154, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__SRC_BT_CFG15 = IOMUX_PAD(0x03E0, 0x0154, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA15__USDHC2_DATA5 = IOMUX_PAD(0x03E0, 0x0154, 8, 0x0690, 0, 0),
+
+ MX6_PAD_LCD_DATA16__LCDIF_DATA16 = IOMUX_PAD(0x03E4, 0x0158, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA16__UART7_DCE_TX = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA16__UART7_DTE_RX = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0654, 2, 0),
+ MX6_PAD_LCD_DATA16__CSI_DATA01 = IOMUX_PAD(0x03E4, 0x0158, 3, 0x04D4, 1, 0),
+ MX6_PAD_LCD_DATA16__EIM_DATA08 = IOMUX_PAD(0x03E4, 0x0158, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA16__GPIO3_IO21 = IOMUX_PAD(0x03E4, 0x0158, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA16__SRC_BT_CFG24 = IOMUX_PAD(0x03E4, 0x0158, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA16__USDHC2_DATA6 = IOMUX_PAD(0x03E4, 0x0158, 8, 0x0694, 0, 0),
+
+ MX6_PAD_LCD_DATA17__LCDIF_DATA17 = IOMUX_PAD(0x03E8, 0x015C, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA17__UART7_DCE_RX = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0654, 3, 0),
+ MX6_PAD_LCD_DATA17__UART7_DTE_TX = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA17__CSI_DATA00 = IOMUX_PAD(0x03E8, 0x015C, 3, 0x04D0, 1, 0),
+ MX6_PAD_LCD_DATA17__EIM_DATA09 = IOMUX_PAD(0x03E8, 0x015C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA17__GPIO3_IO22 = IOMUX_PAD(0x03E8, 0x015C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA17__SRC_BT_CFG25 = IOMUX_PAD(0x03E8, 0x015C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA17__USDHC2_DATA7 = IOMUX_PAD(0x03E8, 0x015C, 8, 0x0698, 0, 0),
+
+ MX6_PAD_LCD_DATA18__LCDIF_DATA18 = IOMUX_PAD(0x03EC, 0x0160, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__PWM5_OUT = IOMUX_PAD(0x03EC, 0x0160, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__CA7_MX6UL_EVENTO = IOMUX_PAD(0x03EC, 0x0160, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__CSI_DATA10 = IOMUX_PAD(0x03EC, 0x0160, 3, 0x04EC, 1, 0),
+ MX6_PAD_LCD_DATA18__EIM_DATA10 = IOMUX_PAD(0x03EC, 0x0160, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__GPIO3_IO23 = IOMUX_PAD(0x03EC, 0x0160, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__SRC_BT_CFG26 = IOMUX_PAD(0x03EC, 0x0160, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA18__USDHC2_CMD = IOMUX_PAD(0x03EC, 0x0160, 8, 0x0678, 1, 0),
+ MX6_PAD_LCD_DATA19__EIM_DATA11 = IOMUX_PAD(0x03F0, 0x0164, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__GPIO3_IO24 = IOMUX_PAD(0x03F0, 0x0164, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__SRC_BT_CFG27 = IOMUX_PAD(0x03F0, 0x0164, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__USDHC2_CLK = IOMUX_PAD(0x03F0, 0x0164, 8, 0x0670, 1, 0),
+
+ MX6_PAD_LCD_DATA19__LCDIF_DATA19 = IOMUX_PAD(0x03F0, 0x0164, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__PWM6_OUT = IOMUX_PAD(0x03F0, 0x0164, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__WDOG1_WDOG_ANY = IOMUX_PAD(0x03F0, 0x0164, 2, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA19__CSI_DATA11 = IOMUX_PAD(0x03F0, 0x0164, 3, 0x04F0, 1, 0),
+ MX6_PAD_LCD_DATA20__EIM_DATA12 = IOMUX_PAD(0x03F4, 0x0168, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__GPIO3_IO25 = IOMUX_PAD(0x03F4, 0x0168, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__SRC_BT_CFG28 = IOMUX_PAD(0x03F4, 0x0168, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__USDHC2_DATA0 = IOMUX_PAD(0x03F4, 0x0168, 8, 0x067C, 1, 0),
+
+ MX6_PAD_LCD_DATA20__LCDIF_DATA20 = IOMUX_PAD(0x03F4, 0x0168, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__UART8_DCE_TX = IOMUX_PAD(0x03F4, 0x0168, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA20__UART8_DTE_RX = IOMUX_PAD(0x03F4, 0x0168, 1, 0x065C, 2, 0),
+ MX6_PAD_LCD_DATA20__ECSPI1_SCLK = IOMUX_PAD(0x03F4, 0x0168, 2, 0x0534, 0, 0),
+ MX6_PAD_LCD_DATA20__CSI_DATA12 = IOMUX_PAD(0x03F4, 0x0168, 3, 0x04F4, 1, 0),
+
+ MX6_PAD_LCD_DATA21__LCDIF_DATA21 = IOMUX_PAD(0x03F8, 0x016C, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__UART8_DCE_RX = IOMUX_PAD(0x03F8, 0x016C, 1, 0x065C, 3, 0),
+ MX6_PAD_LCD_DATA21__UART8_DTE_TX = IOMUX_PAD(0x03F8, 0x016C, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__ECSPI1_SS0 = IOMUX_PAD(0x03F8, 0x016C, 2, 0x0540, 0, 0),
+ MX6_PAD_LCD_DATA21__CSI_DATA13 = IOMUX_PAD(0x03F8, 0x016C, 3, 0x04F8, 1, 0),
+ MX6_PAD_LCD_DATA21__EIM_DATA13 = IOMUX_PAD(0x03F8, 0x016C, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__GPIO3_IO26 = IOMUX_PAD(0x03F8, 0x016C, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__SRC_BT_CFG29 = IOMUX_PAD(0x03F8, 0x016C, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA21__USDHC2_DATA1 = IOMUX_PAD(0x03F8, 0x016C, 8, 0x0680, 1, 0),
+
+ MX6_PAD_LCD_DATA22__LCDIF_DATA22 = IOMUX_PAD(0x03FC, 0x0170, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__MQS_RIGHT = IOMUX_PAD(0x03FC, 0x0170, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__ECSPI1_MOSI = IOMUX_PAD(0x03FC, 0x0170, 2, 0x053C, 0, 0),
+ MX6_PAD_LCD_DATA22__CSI_DATA14 = IOMUX_PAD(0x03FC, 0x0170, 3, 0x04FC, 1, 0),
+ MX6_PAD_LCD_DATA22__EIM_DATA14 = IOMUX_PAD(0x03FC, 0x0170, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__GPIO3_IO27 = IOMUX_PAD(0x03FC, 0x0170, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__SRC_BT_CFG30 = IOMUX_PAD(0x03FC, 0x0170, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA22__USDHC2_DATA2 = IOMUX_PAD(0x03FC, 0x0170, 8, 0x0684, 0, 0),
+
+ MX6_PAD_LCD_DATA23__LCDIF_DATA23 = IOMUX_PAD(0x0400, 0x0174, 0, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA23__MQS_LEFT = IOMUX_PAD(0x0400, 0x0174, 1, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA23__ECSPI1_MISO = IOMUX_PAD(0x0400, 0x0174, 2, 0x0538, 0, 0),
+ MX6_PAD_LCD_DATA23__CSI_DATA15 = IOMUX_PAD(0x0400, 0x0174, 3, 0x0500, 1, 0),
+ MX6_PAD_LCD_DATA23__EIM_DATA15 = IOMUX_PAD(0x0400, 0x0174, 4, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA23__GPIO3_IO28 = IOMUX_PAD(0x0400, 0x0174, 5, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA23__SRC_BT_CFG31 = IOMUX_PAD(0x0400, 0x0174, 6, 0x0000, 0, 0),
+ MX6_PAD_LCD_DATA23__USDHC2_DATA3 = IOMUX_PAD(0x0400, 0x0174, 8, 0x0688, 1, 0),
+
+ MX6_PAD_NAND_RE_B__RAWNAND_RE_B = IOMUX_PAD(0x0404, 0x0178, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_RE_B__USDHC2_CLK = IOMUX_PAD(0x0404, 0x0178, 1, 0x0670, 2, 0),
+ MX6_PAD_NAND_RE_B__QSPI_B_SCLK = IOMUX_PAD(0x0404, 0x0178, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_RE_B__KPP_ROW00 = IOMUX_PAD(0x0404, 0x0178, 3, 0x05D0, 1, 0),
+ MX6_PAD_NAND_RE_B__EIM_EB_B00 = IOMUX_PAD(0x0404, 0x0178, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_RE_B__GPIO4_IO00 = IOMUX_PAD(0x0404, 0x0178, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_RE_B__ECSPI3_SS2 = IOMUX_PAD(0x0404, 0x0178, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_WE_B__RAWNAND_WE_B = IOMUX_PAD(0x0408, 0x017C, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_WE_B__USDHC2_CMD = IOMUX_PAD(0x0408, 0x017C, 1, 0x0678, 2, 0),
+ MX6_PAD_NAND_WE_B__QSPI_B_SS0_B = IOMUX_PAD(0x0408, 0x017C, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_WE_B__KPP_COL00 = IOMUX_PAD(0x0408, 0x017C, 3, 0x05C4, 1, 0),
+ MX6_PAD_NAND_WE_B__EIM_EB_B01 = IOMUX_PAD(0x0408, 0x017C, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_WE_B__GPIO4_IO01 = IOMUX_PAD(0x0408, 0x017C, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_WE_B__ECSPI3_SS3 = IOMUX_PAD(0x0408, 0x017C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DATA00__RAWNAND_DATA00 = IOMUX_PAD(0x040C, 0x0180, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA00__USDHC2_DATA0 = IOMUX_PAD(0x040C, 0x0180, 1, 0x067C, 2, 0),
+ MX6_PAD_NAND_DATA00__QSPI_B_SS1_B = IOMUX_PAD(0x040C, 0x0180, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA00__KPP_ROW01 = IOMUX_PAD(0x040C, 0x0180, 3, 0x05D4, 1, 0),
+ MX6_PAD_NAND_DATA00__EIM_AD08 = IOMUX_PAD(0x040C, 0x0180, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA00__GPIO4_IO02 = IOMUX_PAD(0x040C, 0x0180, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA00__ECSPI4_RDY = IOMUX_PAD(0x040C, 0x0180, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DATA01__RAWNAND_DATA01 = IOMUX_PAD(0x0410, 0x0184, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA01__USDHC2_DATA1 = IOMUX_PAD(0x0410, 0x0184, 1, 0x0680, 2, 0),
+ MX6_PAD_NAND_DATA01__QSPI_B_DQS = IOMUX_PAD(0x0410, 0x0184, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA01__KPP_COL01 = IOMUX_PAD(0x0410, 0x0184, 3, 0x05C8, 1, 0),
+ MX6_PAD_NAND_DATA01__EIM_AD09 = IOMUX_PAD(0x0410, 0x0184, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA01__GPIO4_IO03 = IOMUX_PAD(0x0410, 0x0184, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA01__ECSPI4_SS1 = IOMUX_PAD(0x0410, 0x0184, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DATA02__RAWNAND_DATA02 = IOMUX_PAD(0x0414, 0x0188, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA02__USDHC2_DATA2 = IOMUX_PAD(0x0414, 0x0188, 1, 0x0684, 1, 0),
+ MX6_PAD_NAND_DATA02__QSPI_B_DATA00 = IOMUX_PAD(0x0414, 0x0188, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA02__KPP_ROW02 = IOMUX_PAD(0x0414, 0x0188, 3, 0x05D8, 1, 0),
+ MX6_PAD_NAND_DATA02__EIM_AD10 = IOMUX_PAD(0x0414, 0x0188, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA02__GPIO4_IO04 = IOMUX_PAD(0x0414, 0x0188, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA02__ECSPI4_SS2 = IOMUX_PAD(0x0414, 0x0188, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DATA03__RAWNAND_DATA03 = IOMUX_PAD(0x0418, 0x018C, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 = IOMUX_PAD(0x0418, 0x018C, 1, 0x0688, 2, 0),
+ MX6_PAD_NAND_DATA03__QSPI_B_DATA01 = IOMUX_PAD(0x0418, 0x018C, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA03__KPP_COL02 = IOMUX_PAD(0x0418, 0x018C, 3, 0x05CC, 1, 0),
+ MX6_PAD_NAND_DATA03__EIM_AD11 = IOMUX_PAD(0x0418, 0x018C, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA03__GPIO4_IO05 = IOMUX_PAD(0x0418, 0x018C, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA03__ECSPI4_SS3 = IOMUX_PAD(0x0418, 0x018C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DATA04__RAWNAND_DATA04 = IOMUX_PAD(0x041C, 0x0190, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA04__USDHC2_DATA4 = IOMUX_PAD(0x041C, 0x0190, 1, 0x068C, 1, 0),
+ MX6_PAD_NAND_DATA04__QSPI_B_DATA02 = IOMUX_PAD(0x041C, 0x0190, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA04__ECSPI4_SCLK = IOMUX_PAD(0x041C, 0x0190, 3, 0x0564, 1, 0),
+ MX6_PAD_NAND_DATA04__EIM_AD12 = IOMUX_PAD(0x041C, 0x0190, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA04__GPIO4_IO06 = IOMUX_PAD(0x041C, 0x0190, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA04__UART2_DCE_TX = IOMUX_PAD(0x041C, 0x0190, 8, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA04__UART2_DTE_RX = IOMUX_PAD(0x041C, 0x0190, 8, 0x062C, 2, 0),
+
+ MX6_PAD_NAND_DATA05__RAWNAND_DATA05 = IOMUX_PAD(0x0420, 0x0194, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA05__USDHC2_DATA5 = IOMUX_PAD(0x0420, 0x0194, 1, 0x0690, 1, 0),
+ MX6_PAD_NAND_DATA05__QSPI_B_DATA03 = IOMUX_PAD(0x0420, 0x0194, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA05__ECSPI4_MOSI = IOMUX_PAD(0x0420, 0x0194, 3, 0x056C, 1, 0),
+ MX6_PAD_NAND_DATA05__EIM_AD13 = IOMUX_PAD(0x0420, 0x0194, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA05__GPIO4_IO07 = IOMUX_PAD(0x0420, 0x0194, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA05__UART2_DCE_RX = IOMUX_PAD(0x0420, 0x0194, 8, 0x062C, 3, 0),
+ MX6_PAD_NAND_DATA05__UART2_DTE_TX = IOMUX_PAD(0x0420, 0x0194, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DATA06__RAWNAND_DATA06 = IOMUX_PAD(0x0424, 0x0198, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA06__USDHC2_DATA6 = IOMUX_PAD(0x0424, 0x0198, 1, 0x0694, 1, 0),
+ MX6_PAD_NAND_DATA06__SAI2_RX_BCLK = IOMUX_PAD(0x0424, 0x0198, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA06__ECSPI4_MISO = IOMUX_PAD(0x0424, 0x0198, 3, 0x0568, 1, 0),
+ MX6_PAD_NAND_DATA06__EIM_AD14 = IOMUX_PAD(0x0424, 0x0198, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA06__GPIO4_IO08 = IOMUX_PAD(0x0424, 0x0198, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA06__UART2_DCE_CTS = IOMUX_PAD(0x0424, 0x0198, 8, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA06__UART2_DTE_RTS = IOMUX_PAD(0x0424, 0x0198, 8, 0x0628, 4, 0),
+
+ MX6_PAD_NAND_DATA07__RAWNAND_DATA07 = IOMUX_PAD(0x0428, 0x019C, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA07__USDHC2_DATA7 = IOMUX_PAD(0x0428, 0x019C, 1, 0x0698, 1, 0),
+ MX6_PAD_NAND_DATA07__QSPI_A_SS1_B = IOMUX_PAD(0x0428, 0x019C, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA07__ECSPI4_SS0 = IOMUX_PAD(0x0428, 0x019C, 3, 0x0570, 1, 0),
+ MX6_PAD_NAND_DATA07__EIM_AD15 = IOMUX_PAD(0x0428, 0x019C, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA07__GPIO4_IO09 = IOMUX_PAD(0x0428, 0x019C, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DATA07__UART2_DCE_RTS = IOMUX_PAD(0x0428, 0x019C, 8, 0x0628, 5, 0),
+ MX6_PAD_NAND_DATA07__UART2_DTE_CTS = IOMUX_PAD(0x0428, 0x019C, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_ALE__RAWNAND_ALE = IOMUX_PAD(0x042C, 0x01A0, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_ALE__USDHC2_RESET_B = IOMUX_PAD(0x042C, 0x01A0, 1, 0x0000, 0, 0),
+ MX6_PAD_NAND_ALE__QSPI_A_DQS = IOMUX_PAD(0x042C, 0x01A0, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_ALE__PWM3_OUT = IOMUX_PAD(0x042C, 0x01A0, 3, 0x0000, 0, 0),
+ MX6_PAD_NAND_ALE__EIM_ADDR17 = IOMUX_PAD(0x042C, 0x01A0, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_ALE__GPIO4_IO10 = IOMUX_PAD(0x042C, 0x01A0, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_ALE__ECSPI3_SS1 = IOMUX_PAD(0x042C, 0x01A0, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_WP_B__RAWNAND_WP_B = IOMUX_PAD(0x0430, 0x01A4, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_WP_B__USDHC1_RESET_B = IOMUX_PAD(0x0430, 0x01A4, 1, 0x0000, 0, 0),
+ MX6_PAD_NAND_WP_B__QSPI_A_SCLK = IOMUX_PAD(0x0430, 0x01A4, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_WP_B__PWM4_OUT = IOMUX_PAD(0x0430, 0x01A4, 3, 0x0000, 0, 0),
+ MX6_PAD_NAND_WP_B__EIM_BCLK = IOMUX_PAD(0x0430, 0x01A4, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_WP_B__GPIO4_IO11 = IOMUX_PAD(0x0430, 0x01A4, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_WP_B__ECSPI3_RDY = IOMUX_PAD(0x0430, 0x01A4, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_READY_B__RAWNAND_READY_B = IOMUX_PAD(0x0434, 0x01A8, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_READY_B__USDHC1_DATA4 = IOMUX_PAD(0x0434, 0x01A8, 1, 0x0000, 0, 0),
+ MX6_PAD_NAND_READY_B__QSPI_A_DATA00 = IOMUX_PAD(0x0434, 0x01A8, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_READY_B__ECSPI3_SS0 = IOMUX_PAD(0x0434, 0x01A8, 3, 0x0560, 1, 0),
+ MX6_PAD_NAND_READY_B__EIM_CS1_B = IOMUX_PAD(0x0434, 0x01A8, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_READY_B__GPIO4_IO12 = IOMUX_PAD(0x0434, 0x01A8, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_READY_B__UART3_DCE_TX = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0000, 0, 0),
+ MX6_PAD_NAND_READY_B__UART3_DTE_RX = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0634, 2, 0),
+
+ MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B = IOMUX_PAD(0x0438, 0x01AC, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE0_B__USDHC1_DATA5 = IOMUX_PAD(0x0438, 0x01AC, 1, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE0_B__QSPI_A_DATA01 = IOMUX_PAD(0x0438, 0x01AC, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE0_B__ECSPI3_SCLK = IOMUX_PAD(0x0438, 0x01AC, 3, 0x0554, 1, 0),
+ MX6_PAD_NAND_CE0_B__EIM_DTACK_B = IOMUX_PAD(0x0438, 0x01AC, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE0_B__GPIO4_IO13 = IOMUX_PAD(0x0438, 0x01AC, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE0_B__UART3_DCE_RX = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0634, 3, 0),
+ MX6_PAD_NAND_CE0_B__UART3_DTE_TX = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_CE1_B__RAWNAND_CE1_B = IOMUX_PAD(0x043C, 0x01B0, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE1_B__USDHC1_DATA6 = IOMUX_PAD(0x043C, 0x01B0, 1, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE1_B__QSPI_A_DATA02 = IOMUX_PAD(0x043C, 0x01B0, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE1_B__ECSPI3_MOSI = IOMUX_PAD(0x043C, 0x01B0, 3, 0x055C, 1, 0),
+ MX6_PAD_NAND_CE1_B__EIM_ADDR18 = IOMUX_PAD(0x043C, 0x01B0, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE1_B__GPIO4_IO14 = IOMUX_PAD(0x043C, 0x01B0, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE1_B__UART3_DCE_CTS = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0000, 0, 0),
+ MX6_PAD_NAND_CE1_B__UART3_DTE_RTS = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0630, 2, 0),
+
+ MX6_PAD_NAND_CLE__RAWNAND_CLE = IOMUX_PAD(0x0440, 0x01B4, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_CLE__USDHC1_DATA7 = IOMUX_PAD(0x0440, 0x01B4, 1, 0x0000, 0, 0),
+ MX6_PAD_NAND_CLE__QSPI_A_DATA03 = IOMUX_PAD(0x0440, 0x01B4, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_CLE__ECSPI3_MISO = IOMUX_PAD(0x0440, 0x01B4, 3, 0x0558, 1, 0),
+ MX6_PAD_NAND_CLE__EIM_ADDR16 = IOMUX_PAD(0x0440, 0x01B4, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_CLE__GPIO4_IO15 = IOMUX_PAD(0x0440, 0x01B4, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_CLE__UART3_DCE_RTS = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0630, 3, 0),
+ MX6_PAD_NAND_CLE__UART3_DTE_CTS = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0000, 0, 0),
+
+ MX6_PAD_NAND_DQS__RAWNAND_DQS = IOMUX_PAD(0x0444, 0x01B8, 0, 0x0000, 0, 0),
+ MX6_PAD_NAND_DQS__CSI_FIELD = IOMUX_PAD(0x0444, 0x01B8, 1, 0x0530, 1, 0),
+ MX6_PAD_NAND_DQS__QSPI_A_SS0_B = IOMUX_PAD(0x0444, 0x01B8, 2, 0x0000, 0, 0),
+ MX6_PAD_NAND_DQS__PWM5_OUT = IOMUX_PAD(0x0444, 0x01B8, 3, 0x0000, 0, 0),
+ MX6_PAD_NAND_DQS__EIM_WAIT = IOMUX_PAD(0x0444, 0x01B8, 4, 0x0000, 0, 0),
+ MX6_PAD_NAND_DQS__GPIO4_IO16 = IOMUX_PAD(0x0444, 0x01B8, 5, 0x0000, 0, 0),
+ MX6_PAD_NAND_DQS__SDMA_EXT_EVENT01 = IOMUX_PAD(0x0444, 0x01B8, 6, 0x0614, 1, 0),
+ MX6_PAD_NAND_DQS__SPDIF_EXT_CLK = IOMUX_PAD(0x0444, 0x01B8, 8, 0x061C, 1, 0),
+
+ MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0448, 0x01BC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPT2_COMPARE1 = IOMUX_PAD(0x0448, 0x01BC, 1, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__SAI2_RX_SYNC = IOMUX_PAD(0x0448, 0x01BC, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__SPDIF_OUT = IOMUX_PAD(0x0448, 0x01BC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__EIM_ADDR19 = IOMUX_PAD(0x0448, 0x01BC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPIO2_IO16 = IOMUX_PAD(0x0448, 0x01BC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__SDMA_EXT_EVENT00 = IOMUX_PAD(0x0448, 0x01BC, 6, 0x0610, 2, 0),
+ MX6_PAD_SD1_CMD__USB_OTG1_PWR = IOMUX_PAD(0x0448, 0x01BC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x044C, 0x01C0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPT2_COMPARE2 = IOMUX_PAD(0x044C, 0x01C0, 1, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__SAI2_MCLK = IOMUX_PAD(0x044C, 0x01C0, 2, 0x05F0, 1, 0),
+ MX6_PAD_SD1_CLK__SPDIF_IN = IOMUX_PAD(0x044C, 0x01C0, 3, 0x0618, 3, 0),
+ MX6_PAD_SD1_CLK__EIM_ADDR20 = IOMUX_PAD(0x044C, 0x01C0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPIO2_IO17 = IOMUX_PAD(0x044C, 0x01C0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__USB_OTG1_OC = IOMUX_PAD(0x044C, 0x01C0, 8, 0x0664, 2, 0),
+
+ MX6_PAD_SD1_DATA0__USDHC1_DATA0 = IOMUX_PAD(0x0450, 0x01C4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__GPT2_COMPARE3 = IOMUX_PAD(0x0450, 0x01C4, 1, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__SAI2_TX_SYNC = IOMUX_PAD(0x0450, 0x01C4, 2, 0x05FC, 1, 0),
+ MX6_PAD_SD1_DATA0__FLEXCAN1_TX = IOMUX_PAD(0x0450, 0x01C4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__EIM_ADDR21 = IOMUX_PAD(0x0450, 0x01C4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__GPIO2_IO18 = IOMUX_PAD(0x0450, 0x01C4, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA0__ANATOP_OTG1_ID = IOMUX_PAD(0x0450, 0x01C4, 8, 0x04B8, 2, 0),
+
+ MX6_PAD_SD1_DATA1__USDHC1_DATA1 = IOMUX_PAD(0x0454, 0x01C8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA1__GPT2_CLK = IOMUX_PAD(0x0454, 0x01C8, 1, 0x05A0, 1, 0),
+ MX6_PAD_SD1_DATA1__SAI2_TX_BCLK = IOMUX_PAD(0x0454, 0x01C8, 2, 0x05F8, 1, 0),
+ MX6_PAD_SD1_DATA1__FLEXCAN1_RX = IOMUX_PAD(0x0454, 0x01C8, 3, 0x0584, 3, 0),
+ MX6_PAD_SD1_DATA1__EIM_ADDR22 = IOMUX_PAD(0x0454, 0x01C8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA1__GPIO2_IO19 = IOMUX_PAD(0x0454, 0x01C8, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA1__USB_OTG2_PWR = IOMUX_PAD(0x0454, 0x01C8, 8, 0x0000, 0, 0),
+
+ MX6_PAD_SD1_DATA2__USDHC1_DATA2 = IOMUX_PAD(0x0458, 0x01CC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__GPT2_CAPTURE1 = IOMUX_PAD(0x0458, 0x01CC, 1, 0x0598, 1, 0),
+ MX6_PAD_SD1_DATA2__SAI2_RX_DATA = IOMUX_PAD(0x0458, 0x01CC, 2, 0x05F4, 1, 0),
+ MX6_PAD_SD1_DATA2__FLEXCAN2_TX = IOMUX_PAD(0x0458, 0x01CC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__EIM_ADDR23 = IOMUX_PAD(0x0458, 0x01CC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__GPIO2_IO20 = IOMUX_PAD(0x0458, 0x01CC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__CCM_CLKO1 = IOMUX_PAD(0x0458, 0x01CC, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA2__USB_OTG2_OC = IOMUX_PAD(0x0458, 0x01CC, 8, 0x0660, 2, 0),
+
+ MX6_PAD_SD1_DATA3__USDHC1_DATA3 = IOMUX_PAD(0x045C, 0x01D0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__GPT2_CAPTURE2 = IOMUX_PAD(0x045C, 0x01D0, 1, 0x059C, 1, 0),
+ MX6_PAD_SD1_DATA3__SAI2_TX_DATA = IOMUX_PAD(0x045C, 0x01D0, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__FLEXCAN2_RX = IOMUX_PAD(0x045C, 0x01D0, 3, 0x0588, 3, 0),
+ MX6_PAD_SD1_DATA3__EIM_ADDR24 = IOMUX_PAD(0x045C, 0x01D0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__GPIO2_IO21 = IOMUX_PAD(0x045C, 0x01D0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__CCM_CLKO2 = IOMUX_PAD(0x045C, 0x01D0, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DATA3__ANATOP_OTG2_ID = IOMUX_PAD(0x045C, 0x01D0, 8, 0x04BC, 2, 0),
+
+ MX6_PAD_CSI_MCLK__CSI_MCLK = IOMUX_PAD(0x0460, 0x01D4, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI_MCLK__USDHC2_CD_B = IOMUX_PAD(0x0460, 0x01D4, 1, 0x0674, 0, 0),
+ MX6_PAD_CSI_MCLK__RAWNAND_CE2_B = IOMUX_PAD(0x0460, 0x01D4, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_MCLK__I2C1_SDA = IOMUX_PAD(0x0460, 0x01D4, IOMUX_CONFIG_SION | 3, 0x05A8, 0, 0),
+ MX6_PAD_CSI_MCLK__EIM_CS0_B = IOMUX_PAD(0x0460, 0x01D4, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_MCLK__GPIO4_IO17 = IOMUX_PAD(0x0460, 0x01D4, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL = IOMUX_PAD(0x0460, 0x01D4, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_MCLK__UART6_DCE_TX = IOMUX_PAD(0x0460, 0x01D4, 8, 0x0000, 0, 0),
+ MX6_PAD_CSI_MCLK__UART6_DTE_RX = IOMUX_PAD(0x0460, 0x01D4, 8, 0x064C, 0, 0),
+
+ MX6_PAD_CSI_PIXCLK__CSI_PIXCLK = IOMUX_PAD(0x0464, 0x01D8, 0, 0x0528, 1, 0),
+ MX6_PAD_CSI_PIXCLK__USDHC2_WP = IOMUX_PAD(0x0464, 0x01D8, 1, 0x069C, 2, 0),
+ MX6_PAD_CSI_PIXCLK__RAWNAND_CE3_B = IOMUX_PAD(0x0464, 0x01D8, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_PIXCLK__I2C1_SCL = IOMUX_PAD(0x0464, 0x01D8, IOMUX_CONFIG_SION | 3, 0x05A4, 2, 0),
+ MX6_PAD_CSI_PIXCLK__EIM_OE = IOMUX_PAD(0x0464, 0x01D8, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_PIXCLK__GPIO4_IO18 = IOMUX_PAD(0x0464, 0x01D8, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 = IOMUX_PAD(0x0464, 0x01D8, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_PIXCLK__UART6_DCE_RX = IOMUX_PAD(0x0464, 0x01D8, 8, 0x064C, 3, 0),
+ MX6_PAD_CSI_PIXCLK__UART6_DTE_TX = IOMUX_PAD(0x0464, 0x01D8, 8, 0x0000, 0, 0),
+
+ MX6_PAD_CSI_VSYNC__CSI_VSYNC = IOMUX_PAD(0x0468, 0x01DC, 0, 0x052C, 0, 0),
+ MX6_PAD_CSI_VSYNC__USDHC2_CLK = IOMUX_PAD(0x0468, 0x01DC, 1, 0x0670, 0, 0),
+ MX6_PAD_CSI_VSYNC__SIM1_PORT1_CLK = IOMUX_PAD(0x0468, 0x01DC, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_VSYNC__I2C2_SDA = IOMUX_PAD(0x0468, 0x01DC, IOMUX_CONFIG_SION | 3, 0x05B0, 0, 0),
+ MX6_PAD_CSI_VSYNC__EIM_RW = IOMUX_PAD(0x0468, 0x01DC, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_VSYNC__GPIO4_IO19 = IOMUX_PAD(0x0468, 0x01DC, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_VSYNC__PWM7_OUT = IOMUX_PAD(0x0468, 0x01DC, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_VSYNC__UART6_DCE_RTS = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0648, 0, 0),
+ MX6_PAD_CSI_VSYNC__UART6_DTE_CTS = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_CSI_HSYNC__CSI_HSYNC = IOMUX_PAD(0x046C, 0x01E0, 0, 0x0524, 0, 0),
+ MX6_PAD_CSI_HSYNC__USDHC2_CMD = IOMUX_PAD(0x046C, 0x01E0, 1, 0x0678, 0, 0),
+ MX6_PAD_CSI_HSYNC__SIM1_PORT1_PD = IOMUX_PAD(0x046C, 0x01E0, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_HSYNC__I2C2_SCL = IOMUX_PAD(0x046C, 0x01E0, IOMUX_CONFIG_SION | 3, 0x05AC, 0, 0),
+ MX6_PAD_CSI_HSYNC__EIM_LBA_B = IOMUX_PAD(0x046C, 0x01E0, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_HSYNC__GPIO4_IO20 = IOMUX_PAD(0x046C, 0x01E0, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_HSYNC__PWM8_OUT = IOMUX_PAD(0x046C, 0x01E0, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_HSYNC__UART6_DCE_CTS = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0000, 0, 0),
+ MX6_PAD_CSI_HSYNC__UART6_DTE_RTS = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0648, 1, 0),
+
+ MX6_PAD_CSI_DATA00__CSI_DATA02 = IOMUX_PAD(0x0470, 0x01E4, 0, 0x04C4, 0, 0),
+ MX6_PAD_CSI_DATA00__USDHC2_DATA0 = IOMUX_PAD(0x0470, 0x01E4, 1, 0x067C, 0, 0),
+ MX6_PAD_CSI_DATA00__SIM1_PORT1_RST_B = IOMUX_PAD(0x0470, 0x01E4, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA00__ECSPI2_SCLK = IOMUX_PAD(0x0470, 0x01E4, 3, 0x0544, 0, 0),
+ MX6_PAD_CSI_DATA00__EIM_AD00 = IOMUX_PAD(0x0470, 0x01E4, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA00__GPIO4_IO21 = IOMUX_PAD(0x0470, 0x01E4, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA00__SRC_INT_BOOT = IOMUX_PAD(0x0470, 0x01E4, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA00__UART5_DCE_TX = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA00__UART5_DTE_RX = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0644, 0, 0),
+
+ MX6_PAD_CSI_DATA01__CSI_DATA03 = IOMUX_PAD(0x0474, 0x01E8, 0, 0x04C8, 0, 0),
+ MX6_PAD_CSI_DATA01__USDHC2_DATA1 = IOMUX_PAD(0x0474, 0x01E8, 1, 0x0680, 0, 0),
+ MX6_PAD_CSI_DATA01__SIM1_PORT1_SVEN = IOMUX_PAD(0x0474, 0x01E8, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA01__ECSPI2_SS0 = IOMUX_PAD(0x0474, 0x01E8, 3, 0x0550, 0, 0),
+ MX6_PAD_CSI_DATA01__EIM_AD01 = IOMUX_PAD(0x0474, 0x01E8, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA01__GPIO4_IO22 = IOMUX_PAD(0x0474, 0x01E8, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA01__SAI1_MCLK = IOMUX_PAD(0x0474, 0x01E8, 6, 0x05E0, 0, 0),
+ MX6_PAD_CSI_DATA01__UART5_DCE_RX = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0644, 1, 0),
+ MX6_PAD_CSI_DATA01__UART5_DTE_TX = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0000, 0, 0),
+
+ MX6_PAD_CSI_DATA02__CSI_DATA04 = IOMUX_PAD(0x0478, 0x01EC, 0, 0x04D8, 1, 0),
+ MX6_PAD_CSI_DATA02__USDHC2_DATA2 = IOMUX_PAD(0x0478, 0x01EC, 1, 0x0684, 2, 0),
+ MX6_PAD_CSI_DATA02__SIM1_PORT1_TRXD = IOMUX_PAD(0x0478, 0x01EC, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA02__ECSPI2_MOSI = IOMUX_PAD(0x0478, 0x01EC, 3, 0x054C, 1, 0),
+ MX6_PAD_CSI_DATA02__EIM_AD02 = IOMUX_PAD(0x0478, 0x01EC, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA02__GPIO4_IO23 = IOMUX_PAD(0x0478, 0x01EC, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA02__SAI1_RX_SYNC = IOMUX_PAD(0x0478, 0x01EC, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA02__UART5_DCE_RTS = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0640, 5, 0),
+ MX6_PAD_CSI_DATA02__UART5_DTE_CTS = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_CSI_DATA03__CSI_DATA05 = IOMUX_PAD(0x047C, 0x01F0, 0, 0x04CC, 0, 0),
+ MX6_PAD_CSI_DATA03__USDHC2_DATA3 = IOMUX_PAD(0x047C, 0x01F0, 1, 0x0688, 0, 0),
+ MX6_PAD_CSI_DATA03__SIM2_PORT1_PD = IOMUX_PAD(0x047C, 0x01F0, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA03__ECSPI2_MISO = IOMUX_PAD(0x047C, 0x01F0, 3, 0x0548, 0, 0),
+ MX6_PAD_CSI_DATA03__EIM_AD03 = IOMUX_PAD(0x047C, 0x01F0, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA03__GPIO4_IO24 = IOMUX_PAD(0x047C, 0x01F0, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA03__SAI1_RX_BCLK = IOMUX_PAD(0x047C, 0x01F0, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA03__UART5_DCE_CTS = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA03__UART5_DTE_RTS = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0640, 0, 0),
+
+ MX6_PAD_CSI_DATA04__CSI_DATA06 = IOMUX_PAD(0x0480, 0x01F4, 0, 0x04DC, 1, 0),
+ MX6_PAD_CSI_DATA04__USDHC2_DATA4 = IOMUX_PAD(0x0480, 0x01F4, 1, 0x068C, 2, 0),
+ MX6_PAD_CSI_DATA04__SIM2_PORT1_CLK = IOMUX_PAD(0x0480, 0x01F4, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA04__ECSPI1_SCLK = IOMUX_PAD(0x0480, 0x01F4, 3, 0x0534, 1, 0),
+ MX6_PAD_CSI_DATA04__EIM_AD04 = IOMUX_PAD(0x0480, 0x01F4, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA04__GPIO4_IO25 = IOMUX_PAD(0x0480, 0x01F4, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA04__SAI1_TX_SYNC = IOMUX_PAD(0x0480, 0x01F4, 6, 0x05EC, 1, 0),
+ MX6_PAD_CSI_DATA04__USDHC1_WP = IOMUX_PAD(0x0480, 0x01F4, 8, 0x066C, 2, 0),
+
+ MX6_PAD_CSI_DATA05__CSI_DATA07 = IOMUX_PAD(0x0484, 0x01F8, 0, 0x04E0, 1, 0),
+ MX6_PAD_CSI_DATA05__USDHC2_DATA5 = IOMUX_PAD(0x0484, 0x01F8, 1, 0x0690, 2, 0),
+ MX6_PAD_CSI_DATA05__SIM2_PORT1_RST_B = IOMUX_PAD(0x0484, 0x01F8, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA05__ECSPI1_SS0 = IOMUX_PAD(0x0484, 0x01F8, 3, 0x0540, 1, 0),
+ MX6_PAD_CSI_DATA05__EIM_AD05 = IOMUX_PAD(0x0484, 0x01F8, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA05__GPIO4_IO26 = IOMUX_PAD(0x0484, 0x01F8, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA05__SAI1_TX_BCLK = IOMUX_PAD(0x0484, 0x01F8, 6, 0x05E8, 1, 0),
+ MX6_PAD_CSI_DATA05__USDHC1_CD_B = IOMUX_PAD(0x0484, 0x01F8, 8, 0x0668, 2, 0),
+
+ MX6_PAD_CSI_DATA06__CSI_DATA08 = IOMUX_PAD(0x0488, 0x01FC, 0, 0x04E4, 1, 0),
+ MX6_PAD_CSI_DATA06__USDHC2_DATA6 = IOMUX_PAD(0x0488, 0x01FC, 1, 0x0694, 2, 0),
+ MX6_PAD_CSI_DATA06__SIM2_PORT1_SVEN = IOMUX_PAD(0x0488, 0x01FC, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA06__ECSPI1_MOSI = IOMUX_PAD(0x0488, 0x01FC, 3, 0x053C, 1, 0),
+ MX6_PAD_CSI_DATA06__EIM_AD06 = IOMUX_PAD(0x0488, 0x01FC, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA06__GPIO4_IO27 = IOMUX_PAD(0x0488, 0x01FC, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA06__SAI1_RX_DATA = IOMUX_PAD(0x0488, 0x01FC, 6, 0x05E4, 1, 0),
+ MX6_PAD_CSI_DATA06__USDHC1_RESET_B = IOMUX_PAD(0x0488, 0x01FC, 8, 0x0000, 0, 0),
+
+ MX6_PAD_CSI_DATA07__CSI_DATA09 = IOMUX_PAD(0x048C, 0x0200, 0, 0x04E8, 1, 0),
+ MX6_PAD_CSI_DATA07__USDHC2_DATA7 = IOMUX_PAD(0x048C, 0x0200, 1, 0x0698, 2, 0),
+ MX6_PAD_CSI_DATA07__SIM2_PORT1_TRXD = IOMUX_PAD(0x048C, 0x0200, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA07__ECSPI1_MISO = IOMUX_PAD(0x048C, 0x0200, 3, 0x0538, 1, 0),
+ MX6_PAD_CSI_DATA07__EIM_AD07 = IOMUX_PAD(0x048C, 0x0200, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA07__GPIO4_IO28 = IOMUX_PAD(0x048C, 0x0200, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA07__SAI1_TX_DATA = IOMUX_PAD(0x048C, 0x0200, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI_DATA07__USDHC1_VSELECT = IOMUX_PAD(0x048C, 0x0200, 8, 0x0000, 0, 0),
+};
+#endif /* __ASM_ARCH_IMX6UL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 28c77a498e..eee8ca8af7 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -30,9 +30,7 @@ const char *get_imx_type(u32 imxtype);
unsigned imx_ddr_size(void);
void set_chipselect_size(int const);
-#define is_mx6dqp() ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_2_0))
+#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
/*
* Initializes on-chip ethernet controllers.
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index fdb45e9954..a46e396f1d 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -207,6 +207,7 @@ struct anadig_reg {
#define CCM_CCGR4_CCM_CTRL_MASK (0x3 << 22)
#define CCM_CCGR4_GPC_CTRL_MASK (0x3 << 24)
#define CCM_CCGR4_I2C0_CTRL_MASK (0x3 << 12)
+#define CCM_CCGR4_I2C1_CTRL_MASK (0x3 << 14)
#define CCM_CCGR6_OCOTP_CTRL_MASK (0x3 << 10)
#define CCM_CCGR6_DSPI2_CTRL_MASK (0x3 << 24)
#define CCM_CCGR6_DSPI3_CTRL_MASK (0x3 << 26)
@@ -216,6 +217,8 @@ struct anadig_reg {
#define CCM_CCGR9_FEC0_CTRL_MASK 0x3
#define CCM_CCGR9_FEC1_CTRL_MASK (0x3 << 2)
#define CCM_CCGR10_NFC_CTRL_MASK 0x3
+#define CCM_CCGR10_I2C2_CTRL_MASK (0x3 << 12)
+#define CCM_CCGR10_I2C3_CTRL_MASK (0x3 << 14)
#define ANADIG_PLL7_CTRL_BYPASS (1 << 16)
#define ANADIG_PLL7_CTRL_ENABLE (1 << 13)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 7df3b1e392..436698588c 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -75,6 +75,9 @@
#define ESAI_FIFO_BASE_ADDR (AIPS0_BASE_ADDR + 0x00063000)
#define WDOG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00065000)
#define I2C1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00066000)
+#define I2C2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00067000)
+#define I2C3_BASE_ADDR (AIPS0_BASE_ADDR + 0x000E6000)
+#define I2C4_BASE_ADDR (AIPS0_BASE_ADDR + 0x000E7000)
#define WKUP_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006A000)
#define CCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006B000)
#define GPC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006C000)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 019307b2f9..0e2bd5366c 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -20,7 +20,8 @@
#define VF610_DDR_PAD_CTRL_1 (PAD_CTL_DSE_25ohm | \
PAD_CTL_INPUT_DIFFERENTIAL)
#define VF610_I2C_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
- PAD_CTL_SPEED_HIGH | PAD_CTL_OBE_IBE_ENABLE)
+ PAD_CTL_SPEED_HIGH | PAD_CTL_ODE | \
+ PAD_CTL_OBE_IBE_ENABLE)
#define VF610_NFC_IO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
PAD_CTL_DSE_50ohm | PAD_CTL_PUS_47K_UP | \
PAD_CTL_OBE_IBE_ENABLE)
@@ -110,6 +111,8 @@ enum {
VF610_PAD_PTA29__ESDHC1_DAT3 = IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
VF610_PAD_PTB14__I2C0_SCL = IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
VF610_PAD_PTB15__I2C0_SDA = IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
+ VF610_PAD_PTA22__I2C2_SCL = IOMUX_PAD(0x0030, 0x0030, 6, 0x034c, 0, VF610_I2C_PAD_CTRL),
+ VF610_PAD_PTA23__I2C2_SDA = IOMUX_PAD(0x0034, 0x0034, 6, 0x0350, 0, VF610_I2C_PAD_CTRL),
VF610_PAD_PTD31__NF_IO15 = IOMUX_PAD(0x00fc, 0x00fc, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD31__GPIO_63 = IOMUX_PAD(0x00fc, 0x00fc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD30__NF_IO14 = IOMUX_PAD(0x0100, 0x0100, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
@@ -146,10 +149,10 @@ enum {
VF610_PAD_PTD12__GPIO_91 = IOMUX_PAD(0x016c, 0x016c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD13__GPIO_92 = IOMUX_PAD(0x0170, 0x0170, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD22__NF_IO6 = IOMUX_PAD(0x0120, 0x0120, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
- VF610_PAD_PTD21__NF_IO5 = IOMUX_PAD(0x0124, 0x0124, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
- VF610_PAD_PTD20__NF_IO4 = IOMUX_PAD(0x0128, 0x0128, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD21__NF_IO5 = IOMUX_PAD(0x0124, 0x0124, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD20__NF_IO4 = IOMUX_PAD(0x0128, 0x0128, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD19__NF_IO3 = IOMUX_PAD(0x012c, 0x012c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
- VF610_PAD_PTD18__NF_IO2 = IOMUX_PAD(0x0130, 0x0130, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD18__NF_IO2 = IOMUX_PAD(0x0130, 0x0130, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD17__NF_IO1 = IOMUX_PAD(0x0134, 0x0134, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD16__NF_IO0 = IOMUX_PAD(0x0138, 0x0138, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTB24__NF_WE_B = IOMUX_PAD(0x0178, 0x0178, 5, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 258101949a..42098a3f49 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -98,7 +98,11 @@ typedef u64 iomux_v3_cfg_t;
#define PAD_CTL_ODE (1 << 11)
+#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)
+#define PAD_CTL_SPEED_LOW (0 << 6)
+#else
#define PAD_CTL_SPEED_LOW (1 << 6)
+#endif
#define PAD_CTL_SPEED_MED (2 << 6)
#define PAD_CTL_SPEED_HIGH (3 << 6)
@@ -127,6 +131,8 @@ typedef u64 iomux_v3_cfg_t;
#define PAD_CTL_SRE (1 << 11)
+#define PAD_CTL_ODE (1 << 10)
+
#define PAD_CTL_DSE_150ohm (1 << 6)
#define PAD_CTL_DSE_50ohm (3 << 6)
#define PAD_CTL_DSE_25ohm (6 << 6)
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 7a1bbafaa5..e85c8aba45 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -13,6 +13,7 @@
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
+#include <errno.h>
#include <fdt_support.h>
#include <sata.h>
#include <splash.h>
@@ -51,45 +52,70 @@ int splash_screen_prepare(void)
#ifdef CONFIG_IMX_HDMI
static void cm_fx6_enable_hdmi(struct display_info_t const *dev)
{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ imx_setup_hdmi();
+ setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
imx_enable_hdmi_phy();
}
-struct display_info_t const displays[] = {
- {
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = detect_hdmi,
- .enable = cm_fx6_enable_hdmi,
- .mode = {
- .name = "HDMI",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 40385,
- .left_margin = 220,
- .right_margin = 40,
- .upper_margin = 21,
- .lower_margin = 7,
- .hsync_len = 60,
- .vsync_len = 10,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED,
- }
- },
+static struct display_info_t preset_hdmi_1024X768 = {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .enable = cm_fx6_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 40385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
};
-size_t display_count = ARRAY_SIZE(displays);
static void cm_fx6_setup_display(void)
{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- int reg;
+ struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
enable_ipu_clock();
- imx_setup_hdmi();
- reg = __raw_readl(&mxc_ccm->CCGR3);
- reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK;
- writel(reg, &mxc_ccm->CCGR3);
+ clrbits_le32(&iomuxc_regs->gpr[3], MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
+}
+
+int board_video_skip(void)
+{
+ int ret;
+ struct display_info_t *preset;
+ char const *panel = getenv("displaytype");
+
+ if (!panel) /* Also accept panel for backward compatibility */
+ panel = getenv("panel");
+
+ if (!panel)
+ return -ENOENT;
+
+ if (!strcmp(panel, "HDMI"))
+ preset = &preset_hdmi_1024X768;
+ else
+ return -EINVAL;
+
+ ret = ipuv3_fb_init(&preset->mode, 0, preset->pixfmt);
+ if (ret) {
+ printf("Can't init display %s: %d\n", preset->mode.name, ret);
+ return ret;
+ }
+
+ preset->enable(preset);
+ printf("Display: %s (%ux%u)\n", preset->mode.name, preset->mode.xres,
+ preset->mode.yres);
+
+ return 0;
}
#else
static inline void cm_fx6_setup_display(void) {}
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
index 5b4b76f5b7..d94ced9c65 100644
--- a/board/compulab/cm_fx6/spl.c
+++ b/board/compulab/cm_fx6/spl.c
@@ -303,7 +303,7 @@ static void cm_fx6_setup_uart(void)
static void cm_fx6_setup_ecspi(void)
{
cm_fx6_set_ecspi_iomux();
- enable_cspi_clock(1, 0);
+ enable_spi_clk(1, 0);
}
#else
static void cm_fx6_setup_ecspi(void) { }
diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
index 749253429b..7de6460ca0 100644
--- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
+++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
@@ -15,9 +15,18 @@
#include <asm/arch/mx6-pins.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sata.h>
#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -27,6 +36,13 @@ DECLARE_GLOBAL_DATA_PTR;
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define MX6Q_QMX6_PFUZE_MUX IMX_GPIO_NR(6, 9)
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -34,12 +50,12 @@ int dram_init(void)
return 0;
}
-iomux_v3_cfg_t const uart2_pads[] = {
+static iomux_v3_cfg_t const uart2_pads[] = {
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t const usdhc2_pads[] = {
+static iomux_v3_cfg_t const usdhc2_pads[] = {
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -49,7 +65,21 @@ iomux_v3_cfg_t const usdhc2_pads[] = {
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
-iomux_v3_cfg_t const usdhc4_pads[] = {
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc4_pads[] = {
MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -63,14 +93,92 @@ iomux_v3_cfg_t const usdhc4_pads[] = {
MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+ MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+#define I2C_PMIC 1 /* I2C2 port is used to connect to the PMIC */
+
+struct interface_level {
+ char *name;
+ uchar value;
+};
+
+static struct interface_level mipi_levels[] = {
+ {"0V0", 0x00},
+ {"2V5", 0x17},
+};
+
+/* setup board specific PMIC */
+int power_init_board(void)
+{
+ struct pmic *p;
+ u32 id1, id2, i;
+ int ret;
+ char const *lv_mipi;
+
+ /* configure I2C multiplexer */
+ gpio_direction_output(MX6Q_QMX6_PFUZE_MUX, 1);
+
+ power_pfuze100_init(I2C_PMIC);
+ p = pmic_get("PFUZE100");
+ if (!p)
+ return -EINVAL;
+
+ ret = pmic_probe(p);
+ if (ret)
+ return ret;
+
+ pmic_reg_read(p, PFUZE100_DEVICEID, &id1);
+ pmic_reg_read(p, PFUZE100_REVID, &id2);
+ printf("PFUZE100 Rev. [%02x/%02x] detected\n", id1, id2);
+
+ if (id2 >= 0x20)
+ return 0;
+
+ /* set level of MIPI if specified */
+ lv_mipi = getenv("lv_mipi");
+ if (lv_mipi)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(mipi_levels); i++) {
+ if (!strcmp(mipi_levels[i].name, lv_mipi)) {
+ printf("set MIPI level %s\n",
+ mipi_levels[i].name);
+ ret = pmic_reg_write(p, PFUZE100_VGEN4VOL,
+ mipi_levels[i].value);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
}
#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[] = {
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
{USDHC2_BASE_ADDR},
+ {USDHC3_BASE_ADDR},
{USDHC4_BASE_ADDR},
};
@@ -84,6 +192,9 @@ int board_mmc_getcd(struct mmc *mmc)
gpio_direction_input(IMX_GPIO_NR(1, 4));
ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
break;
+ case USDHC3_BASE_ADDR:
+ ret = 1; /* eMMC is always present */
+ break;
case USDHC4_BASE_ADDR:
gpio_direction_input(IMX_GPIO_NR(2, 6));
ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
@@ -98,25 +209,237 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_init(bd_t *bis)
{
s32 status = 0;
+ int i;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
- imx_iomux_v3_setup_multiple_pads(
- usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ imx_iomux_v3_setup_multiple_pads(usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
- status = fsl_esdhc_initialize(bis, &usdhc_cfg[0]) |
- fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+ for (i = 0; i < ARRAY_SIZE(usdhc_cfg); i++) {
+ status = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (status)
+ return status;
+ }
- return status;
+ return 0;
}
#endif
+int board_ehci_hcd_init(int port)
+{
+ switch (port) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
+ ARRAY_SIZE(usb_otg_pads));
+ /*
+ * set daisy chain for otg_pin_id on 6q.
+ * for 6dl, this bit is reserved
+ */
+ imx_iomux_set_gpr_register(1, 13, 1, 1);
+ break;
+ case 1:
+ /* nothing to do */
+ break;
+ default:
+ printf("Invalid USB port: %d\n", port);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int board_ehci_power(int port, int on)
+{
+ switch (port) {
+ case 0:
+ break;
+ case 1:
+ gpio_direction_output(IMX_GPIO_NR(5, 5), on);
+ break;
+ default:
+ printf("Invalid USB port: %d\n", port);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+struct display_info_t {
+ int bus;
+ int addr;
+ int pixfmt;
+ int (*detect)(struct display_info_t const *dev);
+ void (*enable)(struct display_info_t const *dev);
+ struct fb_videomode mode;
+};
+
+static void disable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ clrbits_le32(&iomux->gpr[2], IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
+ IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
+}
+
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ disable_lvds(dev);
+ imx_enable_hdmi_phy();
+}
+
+static struct display_info_t const displays[] = {
+{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = NULL,
+ .enable = NULL,
+ .mode = {
+ .name =
+ "Hannstar-XGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED } },
+{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED } }
+};
+
+int board_video_skip(void)
+{
+ int i;
+ int ret;
+ char const *panel = getenv("panel");
+ if (!panel) {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ struct display_info_t const *dev = displays + i;
+ if (dev->detect && dev->detect(dev)) {
+ panel = dev->mode.name;
+ printf("auto-detected panel %s\n", panel);
+ break;
+ }
+ }
+ if (!panel) {
+ panel = displays[0].mode.name;
+ printf("No panel detected: default to %s\n", panel);
+ i = 0;
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ if (!strcmp(panel, displays[i].mode.name))
+ break;
+ }
+ }
+ if (i < ARRAY_SIZE(displays)) {
+ ret = ipuv3_fb_init(&displays[i].mode, 0, displays[i].pixfmt);
+ if (!ret) {
+ if (displays[i].enable)
+ displays[i].enable(displays + i);
+ printf("Display: %s (%ux%u)\n",
+ displays[i].mode.name, displays[i].mode.xres,
+ displays[i].mode.yres);
+ } else
+ printf("LCD %s cannot be configured: %d\n",
+ displays[i].mode.name, ret);
+ } else {
+ printf("unsupported panel %s\n", panel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+
+ /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */
+ setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK |
+ MXC_CCM_CCGR3_LDB_DI1_MASK);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
+ MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
+ (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV |
+ MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV);
+
+ setbits_le32(&mxc_ccm->chsccdr, CHSCCDR_CLK_SEL_LDB_DI0 <<
+ MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET |
+ CHSCCDR_CLK_SEL_LDB_DI0 <<
+ MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
+ | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED
+ | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK |
+ IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) |
+ (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
+ IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
+ setup_display();
return 0;
}
@@ -126,6 +449,12 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
return 0;
}
diff --git a/board/congatec/cgtqmx6eval/imximage.cfg b/board/congatec/cgtqmx6eval/imximage.cfg
index bb6c60b4c3..8c03a49ca9 100644
--- a/board/congatec/cgtqmx6eval/imximage.cfg
+++ b/board/congatec/cgtqmx6eval/imximage.cfg
@@ -30,117 +30,91 @@ BOOT_FROM sd
* Address absolute address of the register
* value value to be stored in the register
*/
+DATA 4 0x020e0798 0x000C0000
+DATA 4 0x020e0758 0x00000000
+DATA 4 0x020e0588 0x00000030
+DATA 4 0x020e0594 0x00000030
+DATA 4 0x020e056c 0x00000030
+DATA 4 0x020e0578 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e057c 0x000c0030
+DATA 4 0x020e058c 0x00000000
+DATA 4 0x020e059c 0x00003030
+DATA 4 0x020e05a0 0x00003030
+DATA 4 0x020e078c 0x00000030
+DATA 4 0x020e0750 0x00020000
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
DATA 4 0x020e051c 0x00000030
-
DATA 4 0x020e0518 0x00000030
DATA 4 0x020e050c 0x00000030
DATA 4 0x020e05b8 0x00000030
DATA 4 0x020e05c0 0x00000030
-
-DATA 4 0x020e05ac 0x00020030
-DATA 4 0x020e05b4 0x00020030
-DATA 4 0x020e0528 0x00020030
-DATA 4 0x020e0520 0x00020030
-
-DATA 4 0x020e0514 0x00020030
-DATA 4 0x020e0510 0x00020030
-DATA 4 0x020e05bc 0x00020030
-DATA 4 0x020e05c4 0x00020030
-
-DATA 4 0x020e056c 0x00020030
-DATA 4 0x020e0578 0x00020030
-DATA 4 0x020e0588 0x00020030
-DATA 4 0x020e0594 0x00020030
-
-DATA 4 0x020e057c 0x00020030
-DATA 4 0x020e0590 0x00003000
-DATA 4 0x020e0598 0x00003000
-DATA 4 0x020e058c 0x00000000
-
-DATA 4 0x020e059c 0x00003030
-DATA 4 0x020e05a0 0x00003030
+DATA 4 0x020e0774 0x00020000
DATA 4 0x020e0784 0x00000030
DATA 4 0x020e0788 0x00000030
-
DATA 4 0x020e0794 0x00000030
DATA 4 0x020e079c 0x00000030
DATA 4 0x020e07a0 0x00000030
DATA 4 0x020e07a4 0x00000030
-
DATA 4 0x020e07a8 0x00000030
DATA 4 0x020e0748 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e0750 0x00020000
-
-DATA 4 0x020e0758 0x00000000
-DATA 4 0x020e0774 0x00020000
-DATA 4 0x020e078c 0x00000030
-DATA 4 0x020e0798 0x000C0000
-
+DATA 4 0x020e05ac 0x00000030
+DATA 4 0x020e05b4 0x00000030
+DATA 4 0x020e0528 0x00000030
+DATA 4 0x020e0520 0x00000030
+DATA 4 0x020e0514 0x00000030
+DATA 4 0x020e0510 0x00000030
+DATA 4 0x020e05bc 0x00000030
+DATA 4 0x020e05c4 0x00000030
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b4800 0xa1390003
+DATA 4 0x021b080c 0x00110019
+DATA 4 0x021b0810 0x00260019
+DATA 4 0x021b480c 0x001A0031
+DATA 4 0x021b4810 0x001A0021
+DATA 4 0x021b083c 0x43100316
+DATA 4 0x021b0840 0x0306027E
+DATA 4 0x021b483c 0x43250330
+DATA 4 0x021b4840 0x0322027B
+DATA 4 0x021b0848 0x47414146
+DATA 4 0x021b4848 0x41434048
+DATA 4 0x021b0850 0x41444A44
+DATA 4 0x021b4850 0x4B444C46
DATA 4 0x021b081c 0x33333333
DATA 4 0x021b0820 0x33333333
DATA 4 0x021b0824 0x33333333
DATA 4 0x021b0828 0x33333333
-
DATA 4 0x021b481c 0x33333333
DATA 4 0x021b4820 0x33333333
DATA 4 0x021b4824 0x33333333
DATA 4 0x021b4828 0x33333333
-
-DATA 4 0x021b0018 0x00081740
-
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b000c 0x555A7974
-DATA 4 0x021b0010 0xDB538F64
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b002c 0x000026D2
-
-DATA 4 0x021b0030 0x005A1023
-DATA 4 0x021b0008 0x09444040
-DATA 4 0x021b0004 0x00025576
-DATA 4 0x021b0040 0x00000027
-DATA 4 0x021b0000 0x831A0000
-
-DATA 4 0x021b001c 0x04088032
-DATA 4 0x021b001c 0x0408803A
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x0000803B
-DATA 4 0x021b001c 0x00428031
-DATA 4 0x021b001c 0x00428039
-DATA 4 0x021b001c 0x19308030
-DATA 4 0x021b001c 0x19308038
-
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b001c 0x04008048
-DATA 4 0x021b0800 0xA1380003
-DATA 4 0x021b4800 0xA1380003
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00022227
-DATA 4 0x021b4818 0x00022227
-
-DATA 4 0x021b083c 0x434B0350
-DATA 4 0x021b0840 0x034C0359
-DATA 4 0x021b483c 0x434B0350
-DATA 4 0x021b4840 0x03650348
-DATA 4 0x021b0848 0x4436383B
-DATA 4 0x021b4848 0x39393341
-DATA 4 0x021b0850 0x35373933
-DATA 4 0x021b4850 0x48254A36
-
-DATA 4 0x021b080c 0x001F001F
-DATA 4 0x021b0810 0x001F001F
-
-DATA 4 0x021b480c 0x00440044
-DATA 4 0x021b4810 0x00440044
-
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b48b8 0x00000800
-
-DATA 4 0x021b001c 0x00000000
+DATA 4 0x021b0004 0x00020036
+DATA 4 0x021b0008 0x09444040
+DATA 4 0x021b000c 0x555A79A4
+DATA 4 0x021b0010 0xDB538F64
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b0018 0x00081740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x005A0E21
+DATA 4 0x021b0040 0x00000027
+DATA 4 0x021b0000 0x831A0000
+DATA 4 0x021b001c 0x04888032
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x00428031
+DATA 4 0x021b001c 0x09308030
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b001c 0x04008048
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00011117
+DATA 4 0x021b4818 0x00011117
+DATA 4 0x021b0004 0x00025576
DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
/* set the default clock gate to save power */
DATA 4 0x020c4068 0x00C03F3F
diff --git a/board/freescale/mx6qsabreauto/mx6qp.cfg b/board/freescale/mx6qsabreauto/mx6qp.cfg
new file mode 100644
index 0000000000..2298c772cc
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6qp.cfg
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of spi, sd, eimnor, nand, sata:
+ * spinor: flash_offset: 0x0400
+ * nand: flash_offset: 0x0400
+ * sata: flash_offset: 0x0400
+ * sd/mmc: flash_offset: 0x0400
+ * eimnor: flash_offset: 0x1000
+ */
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x020e0798 0x000C0000
+DATA 4 0x020e0758 0x00000000
+DATA 4 0x020e0588 0x00000030
+DATA 4 0x020e0594 0x00000030
+DATA 4 0x020e056c 0x00000030
+DATA 4 0x020e0578 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e057c 0x00000030
+DATA 4 0x020e058c 0x00000000
+DATA 4 0x020e059c 0x00000030
+DATA 4 0x020e05a0 0x00000030
+DATA 4 0x020e078c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e05a8 0x00000030
+DATA 4 0x020e05b0 0x00000030
+DATA 4 0x020e0524 0x00000030
+DATA 4 0x020e051c 0x00000030
+DATA 4 0x020e0518 0x00000030
+DATA 4 0x020e050c 0x00000030
+DATA 4 0x020e05b8 0x00000030
+DATA 4 0x020e05c0 0x00000030
+DATA 4 0x020e0774 0x00020000
+DATA 4 0x020e0784 0x00000030
+DATA 4 0x020e0788 0x00000030
+DATA 4 0x020e0794 0x00000030
+DATA 4 0x020e079c 0x00000030
+DATA 4 0x020e07a0 0x00000030
+DATA 4 0x020e07a4 0x00000030
+DATA 4 0x020e07a8 0x00000030
+DATA 4 0x020e0748 0x00000030
+DATA 4 0x020e05ac 0x00000030
+DATA 4 0x020e05b4 0x00000030
+DATA 4 0x020e0528 0x00000030
+DATA 4 0x020e0520 0x00000030
+DATA 4 0x020e0514 0x00000030
+DATA 4 0x020e0510 0x00000030
+DATA 4 0x020e05bc 0x00000030
+DATA 4 0x020e05c4 0x00000030
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b080c 0x001b001e
+DATA 4 0x021b0810 0x002e0029
+DATA 4 0x021b480c 0x001b002a
+DATA 4 0x021b4810 0x0019002c
+DATA 4 0x021b083c 0x43240334
+DATA 4 0x021b0840 0x0324031a
+DATA 4 0x021b483c 0x43340344
+DATA 4 0x021b4840 0x03280276
+DATA 4 0x021b0848 0x44383A3E
+DATA 4 0x021b4848 0x3C3C3846
+DATA 4 0x021b0850 0x2e303230
+DATA 4 0x021b4850 0x38283E34
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08c0 0x24912492
+DATA 4 0x021b48c0 0x24912492
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x00020036
+DATA 4 0x021b0008 0x09444040
+DATA 4 0x021b000c 0x898E7955
+DATA 4 0x021b0010 0xFF328F64
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b0018 0x00001740
+DATA 4 0x021b001c 0x00008000
+
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x008E1023
+DATA 4 0x021b0040 0x00000047
+DATA 4 0x021b0400 0x14420000
+DATA 4 0x021b0000 0x841A0000
+DATA 4 0x00bb0008 0x00000004
+DATA 4 0x00bb000c 0x2891E41A
+DATA 4 0x00bb0038 0x00000564
+DATA 4 0x00bb0014 0x00000040
+DATA 4 0x00bb0028 0x00000020
+DATA 4 0x00bb002c 0x00000020
+DATA 4 0x021b001c 0x04088032
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x00048031
+DATA 4 0x021b001c 0x09408030
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00011117
+DATA 4 0x021b4818 0x00011117
+DATA 4 0x021b0004 0x00025576
+DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
+/* set the default clock gate to save power */
+DATA 4, 0x020c4068, 0x00C03F3F
+DATA 4, 0x020c406c, 0x0030FC03
+DATA 4, 0x020c4070, 0x0FFFC000
+DATA 4, 0x020c4074, 0x3FF00000
+DATA 4, 0x020c4078, 0xFFFFF300
+DATA 4, 0x020c407c, 0x0F0000F3
+DATA 4, 0x020c4080, 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, 0x020e0010, 0xF00000CF
+/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
+DATA 4, 0x020e0018, 0x77177717
+DATA 4, 0x020e001c, 0x77177717
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index b76e4eb528..98602f889e 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -354,9 +354,22 @@ int board_phy_config(struct phy_device *phydev)
return 0;
}
+static void setup_fec(void)
+{
+ if (is_mx6dqp()) {
+ /*
+ * select ENET MAC0 TX clock from PLL
+ */
+ imx_iomux_set_gpr_register(5, 9, 1, 1);
+ enable_fec_anatop_clock(ENET_125MHZ);
+ }
+
+ setup_iomux_enet();
+}
+
int board_eth_init(bd_t *bis)
{
- setup_iomux_enet();
+ setup_fec();
return cpu_eth_init(bis);
}
@@ -495,17 +508,21 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs)
int power_init_board(void)
{
struct pmic *p;
- unsigned int ret;
+ unsigned int value;
p = pfuze_common_init(I2C_PMIC);
if (!p)
return -ENODEV;
- ret = pfuze_mode_init(p, APS_PFM);
- if (ret < 0)
- return ret;
+ if (is_mx6dqp()) {
+ /* set SW2 staby volatage 0.975V*/
+ pmic_reg_read(p, PFUZE100_SW2STBY, &value);
+ value &= ~0x3f;
+ value |= 0x17;
+ pmic_reg_write(p, PFUZE100_SW2STBY, value);
+ }
- return 0;
+ return pfuze_mode_init(p, APS_PFM);
}
#ifdef CONFIG_CMD_BMODE
@@ -522,6 +539,17 @@ int board_late_init(void)
add_board_boot_modes(board_boot_modes);
#endif
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ setenv("board_name", "SABREAUTO");
+
+ if (is_mx6dqp())
+ setenv("board_rev", "MX6QP");
+ else if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ setenv("board_rev", "MX6Q");
+ else if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
+ setenv("board_rev", "MX6DL");
+#endif
+
return 0;
}
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 23f8f6b76f..eb8a8b3826 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -631,7 +631,8 @@ int board_init(void)
int power_init_board(void)
{
struct pmic *p;
- unsigned int reg, ret;
+ unsigned int reg;
+ int ret;
p = pfuze_common_init(I2C_PMIC);
if (!p)
@@ -679,6 +680,16 @@ int board_late_init(void)
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ setenv("board_name", "SABRESD");
+
+ if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ setenv("board_rev", "MX6Q");
+ else if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
+ setenv("board_rev", "MX6DL");
+#endif
+
return 0;
}
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 2ff960e3bb..d58a79a6b8 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -199,7 +199,8 @@ static struct i2c_pads_info i2c_pad_info1 = {
int power_init_board(void)
{
struct pmic *p;
- unsigned int reg, ret;
+ unsigned int reg;
+ int ret;
p = pfuze_common_init(I2C_PMIC);
if (!p)
diff --git a/board/freescale/mx6ul_14x14_evk/Kconfig b/board/freescale/mx6ul_14x14_evk/Kconfig
new file mode 100644
index 0000000000..393aca629b
--- /dev/null
+++ b/board/freescale/mx6ul_14x14_evk/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_MX6UL_14X14_EVK
+
+config SYS_BOARD
+ default "mx6ul_14x14_evk"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "mx6"
+
+config SYS_CONFIG_NAME
+ default "mx6ul_14x14_evk"
+
+endif
diff --git a/board/freescale/mx6ul_14x14_evk/MAINTAINERS b/board/freescale/mx6ul_14x14_evk/MAINTAINERS
new file mode 100644
index 0000000000..611feca106
--- /dev/null
+++ b/board/freescale/mx6ul_14x14_evk/MAINTAINERS
@@ -0,0 +1,6 @@
+MX6ULEVK BOARD
+M: Peng Fan <Peng.Fan@freescale.com>
+S: Maintained
+F: board/freescale/mx6ul_14x14_evk/
+F: include/configs/mx6ul_14x14_evk.h
+F: configs/mx6ul_14x14_evk_defconfig
diff --git a/board/freescale/mx6ul_14x14_evk/Makefile b/board/freescale/mx6ul_14x14_evk/Makefile
new file mode 100644
index 0000000000..61f6778246
--- /dev/null
+++ b/board/freescale/mx6ul_14x14_evk/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2015 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := mx6ul_14x14_evk.o
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
new file mode 100644
index 0000000000..8f712cb058
--- /dev/null
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -0,0 +1,636 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6ul_pins.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <usb.h>
+#include <usb/ehci-fsl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_DAT3_CD_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE)
+
+#define IOX_SDI IMX_GPIO_NR(5, 10)
+#define IOX_STCP IMX_GPIO_NR(5, 7)
+#define IOX_SHCP IMX_GPIO_NR(5, 11)
+#define IOX_OE IMX_GPIO_NR(5, 18)
+
+static iomux_v3_cfg_t const iox_pads[] = {
+ /* IOX_SDI */
+ MX6_PAD_BOOT_MODE0__GPIO5_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* IOX_SHCP */
+ MX6_PAD_BOOT_MODE1__GPIO5_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* IOX_STCP */
+ MX6_PAD_SNVS_TAMPER7__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* IOX_nOE */
+ MX6_PAD_SNVS_TAMPER8__GPIO5_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+/*
+ * HDMI_nRST --> Q0
+ * ENET1_nRST --> Q1
+ * ENET2_nRST --> Q2
+ * CAN1_2_STBY --> Q3
+ * BT_nPWD --> Q4
+ * CSI_RST --> Q5
+ * CSI_PWDN --> Q6
+ * LCD_nPWREN --> Q7
+ */
+enum qn {
+ HDMI_NRST,
+ ENET1_NRST,
+ ENET2_NRST,
+ CAN1_2_STBY,
+ BT_NPWD,
+ CSI_RST,
+ CSI_PWDN,
+ LCD_NPWREN,
+};
+
+enum qn_func {
+ qn_reset,
+ qn_enable,
+ qn_disable,
+};
+
+enum qn_level {
+ qn_low = 0,
+ qn_high = 1,
+};
+
+static enum qn_level seq[3][2] = {
+ {0, 1}, {1, 1}, {0, 0}
+};
+
+static enum qn_func qn_output[8] = {
+ qn_reset, qn_reset, qn_reset, qn_enable, qn_disable, qn_reset,
+ qn_disable, qn_enable
+};
+
+static void iox74lv_init(void)
+{
+ int i;
+
+ gpio_direction_output(IOX_OE, 0);
+
+ for (i = 7; i >= 0; i--) {
+ gpio_direction_output(IOX_SHCP, 0);
+ gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]);
+ udelay(500);
+ gpio_direction_output(IOX_SHCP, 1);
+ udelay(500);
+ }
+
+ gpio_direction_output(IOX_STCP, 0);
+ udelay(500);
+ /*
+ * shift register will be output to pins
+ */
+ gpio_direction_output(IOX_STCP, 1);
+
+ for (i = 7; i >= 0; i--) {
+ gpio_direction_output(IOX_SHCP, 0);
+ gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
+ udelay(500);
+ gpio_direction_output(IOX_SHCP, 1);
+ udelay(500);
+ }
+ gpio_direction_output(IOX_STCP, 0);
+ udelay(500);
+ /*
+ * shift register will be output to pins
+ */
+ gpio_direction_output(IOX_STCP, 1);
+
+ gpio_direction_output(IOX_OE, 1);
+};
+
+void iox74lv_set(int index)
+{
+ int i;
+
+ gpio_direction_output(IOX_OE, 0);
+
+ for (i = 7; i >= 0; i--) {
+ gpio_direction_output(IOX_SHCP, 0);
+
+ if (i == index)
+ gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]);
+ else
+ gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
+ udelay(500);
+ gpio_direction_output(IOX_SHCP, 1);
+ udelay(500);
+ }
+
+ gpio_direction_output(IOX_STCP, 0);
+ udelay(500);
+ /*
+ * shift register will be output to pins
+ */
+ gpio_direction_output(IOX_STCP, 1);
+
+ for (i = 7; i >= 0; i--) {
+ gpio_direction_output(IOX_SHCP, 0);
+ gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
+ udelay(500);
+ gpio_direction_output(IOX_SHCP, 1);
+ udelay(500);
+ }
+
+ gpio_direction_output(IOX_STCP, 0);
+ udelay(500);
+ /*
+ * shift register will be output to pins
+ */
+ gpio_direction_output(IOX_STCP, 1);
+
+ gpio_direction_output(IOX_OE, 1);
+};
+
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* I2C1 for PMIC and EEPROM */
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_UART4_TX_DATA__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_UART4_TX_DATA__GPIO1_IO28 | PC,
+ .gp = IMX_GPIO_NR(1, 28),
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_UART4_RX_DATA__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_UART4_RX_DATA__GPIO1_IO29 | PC,
+ .gp = IMX_GPIO_NR(1, 29),
+ },
+};
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+ /* VSELECT */
+ MX6_PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ /* CD */
+ MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* RST_B */
+ MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+/*
+ * mx6ul_14x14_evk board default supports sd card. If want to use
+ * EMMC, need to do board rework for sd2.
+ * Introduce CONFIG_MX6UL_14X14_EVK_EMMC_REWORK, if sd2 reworked to support
+ * emmc, need to define this macro.
+ */
+#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
+static iomux_v3_cfg_t const usdhc2_emmc_pads[] = {
+ MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+ /*
+ * RST_B
+ */
+ MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+#else
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc2_cd_pads[] = {
+ /*
+ * The evk board uses DAT3 to detect CD card plugin,
+ * in u-boot we mux the pin to GPIO when doing board_mmc_getcd.
+ */
+ MX6_PAD_NAND_DATA03__GPIO4_IO05 | MUX_PAD_CTRL(USDHC_DAT3_CD_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc2_dat3_pads[] = {
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 |
+ MUX_PAD_CTRL(USDHC_DAT3_CD_PAD_CTRL),
+};
+#endif
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FSL_QSPI
+
+#define QSPI_PAD_CTRL1 \
+ (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_MED | \
+ PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_60ohm)
+
+static iomux_v3_cfg_t const quadspi_pads[] = {
+ MX6_PAD_NAND_WP_B__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+ MX6_PAD_NAND_READY_B__QSPI_A_DATA00 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+ MX6_PAD_NAND_CE0_B__QSPI_A_DATA01 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+ MX6_PAD_NAND_CE1_B__QSPI_A_DATA02 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+ MX6_PAD_NAND_CLE__QSPI_A_DATA03 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+ MX6_PAD_NAND_DQS__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+};
+
+int board_qspi_init(void)
+{
+ /* Set the iomux */
+ imx_iomux_v3_setup_multiple_pads(quadspi_pads,
+ ARRAY_SIZE(quadspi_pads));
+ /* Set the clock */
+ enable_qspi_clk(0);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+ {USDHC1_BASE_ADDR, 0, 4},
+#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
+ {USDHC2_BASE_ADDR, 0, 8},
+#else
+ {USDHC2_BASE_ADDR, 0, 4},
+#endif
+};
+
+#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 19)
+#define USDHC1_PWR_GPIO IMX_GPIO_NR(1, 9)
+#define USDHC2_CD_GPIO IMX_GPIO_NR(4, 5)
+#define USDHC2_PWR_GPIO IMX_GPIO_NR(4, 10)
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = !gpio_get_value(USDHC1_CD_GPIO);
+ break;
+ case USDHC2_BASE_ADDR:
+#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
+ ret = 1;
+#else
+ imx_iomux_v3_setup_multiple_pads(usdhc2_cd_pads,
+ ARRAY_SIZE(usdhc2_cd_pads));
+ gpio_direction_input(USDHC2_CD_GPIO);
+
+ /*
+ * Since it is the DAT3 pin, this pin is pulled to
+ * low voltage if no card
+ */
+ ret = gpio_get_value(USDHC2_CD_GPIO);
+
+ imx_iomux_v3_setup_multiple_pads(usdhc2_dat3_pads,
+ ARRAY_SIZE(usdhc2_dat3_pads));
+#endif
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
+ imx_iomux_v3_setup_multiple_pads(usdhc2_emmc_pads,
+ ARRAY_SIZE(usdhc2_emmc_pads));
+#else
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+#endif
+ gpio_direction_output(USDHC2_PWR_GPIO, 0);
+ udelay(500);
+ gpio_direction_output(USDHC2_PWR_GPIO, 1);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+#else
+ int i, ret;
+
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-boot device node) (Physical Port)
+ * mmc0 USDHC1
+ * mmc1 USDHC2
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ gpio_direction_input(USDHC1_CD_GPIO);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ gpio_direction_output(USDHC1_PWR_GPIO, 0);
+ udelay(500);
+ gpio_direction_output(USDHC1_PWR_GPIO, 1);
+ break;
+ case 1:
+#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_emmc_pads, ARRAY_SIZE(usdhc2_emmc_pads));
+#else
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+#endif
+ gpio_direction_output(USDHC2_PWR_GPIO, 0);
+ udelay(500);
+ gpio_direction_output(USDHC2_PWR_GPIO, 1);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers (%d) than supported by the board\n", i + 1);
+ return -EINVAL;
+ }
+
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ return ret;
+ }
+ }
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+#define USB_OTHERREGS_OFFSET 0x800
+#define UCTRL_PWR_POL (1 << 9)
+
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+ MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+/* At default the 3v3 enables the MIC2026 for VBUS power */
+static void setup_usb(void)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
+ ARRAY_SIZE(usb_otg_pads));
+}
+
+int board_usb_phy_mode(int port)
+{
+ if (port == 1)
+ return USB_INIT_HOST;
+ else
+ return usb_phy_mode(port);
+}
+
+int board_ehci_hcd_init(int port)
+{
+ u32 *usbnc_usb_ctrl;
+
+ if (port > 1)
+ return -EINVAL;
+
+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+ port * 4);
+
+ /* Set Power polarity */
+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+ return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ imx_iomux_v3_setup_multiple_pads(iox_pads, ARRAY_SIZE(iox_pads));
+
+ iox74lv_init();
+
+#ifdef CONFIG_SYS_I2C_MXC
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
+#endif
+
+#ifdef CONFIG_FSL_QSPI
+ board_qspi_init();
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)},
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ {"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return get_cpu_rev();
+}
+
+int checkboard(void)
+{
+ puts("Board: MX6UL 14x14 EVK\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <libfdt.h>
+#include <spl.h>
+#include <asm/arch/mx6-ddr.h>
+
+const struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_dqm0 = 0x00000030,
+ .dram_dqm1 = 0x00000030,
+ .dram_ras = 0x00000030,
+ .dram_cas = 0x00000030,
+ .dram_odt0 = 0x00000030,
+ .dram_odt1 = 0x00000030,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdclk_0 = 0x00000008,
+ .dram_sdqs0 = 0x00000038,
+ .dram_sdqs1 = 0x00000030,
+ .dram_reset = 0x00000030,
+};
+
+const struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_addds = 0x00000030,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_b0ds = 0x00000030,
+ .grp_ctlds = 0x00000030,
+ .grp_b1ds = 0x00000030,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ddr_type = 0x000c0000,
+};
+
+const struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x00070007,
+ .p0_mpdgctrl0 = 0x41490145,
+ .p0_mprddlctl = 0x40404546,
+ .p0_mpwrdlctl = 0x4040524D,
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 800,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 15,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0xFFFFFFFF, &ccm->CCGR0);
+ writel(0xFFFFFFFF, &ccm->CCGR1);
+ writel(0xFFFFFFFF, &ccm->CCGR2);
+ writel(0xFFFFFFFF, &ccm->CCGR3);
+ writel(0xFFFFFFFF, &ccm->CCGR4);
+ writel(0xFFFFFFFF, &ccm->CCGR5);
+ writel(0xFFFFFFFF, &ccm->CCGR6);
+ writel(0xFFFFFFFF, &ccm->CCGR7);
+}
+
+static void spl_dram_init(void)
+{
+ struct mx6_ddr_sysinfo sysinfo = {
+ .dsize = 0,
+ .cs_density = 20,
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 2,
+ .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ };
+
+ mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}
+#endif
diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig
index b56237d187..dbd87875b5 100644
--- a/board/tqc/tqma6/Kconfig
+++ b/board/tqc/tqma6/Kconfig
@@ -64,6 +64,11 @@ config MBA6
Select the MBa6 starterkit. This features a GigE Phy, USB, SD-Card
etc.
+config WRU4
+ bool "OHB WRU-IV"
+ help
+ Select the OHB Systems AG WRU-IV baseboard.
+
endchoice
config IMX_CONFIG
diff --git a/board/tqc/tqma6/Makefile b/board/tqc/tqma6/Makefile
index 9ee6920abe..19b56d0165 100644
--- a/board/tqc/tqma6/Makefile
+++ b/board/tqc/tqma6/Makefile
@@ -7,3 +7,4 @@
obj-y := tqma6.o
obj-$(CONFIG_MBA6) += tqma6_mba6.o
+obj-$(CONFIG_WRU4) += tqma6_wru4.o
diff --git a/board/tqc/tqma6/tqma6_wru4.c b/board/tqc/tqma6/tqma6_wru4.c
new file mode 100644
index 0000000000..4427799ca8
--- /dev/null
+++ b/board/tqc/tqma6/tqma6_wru4.c
@@ -0,0 +1,346 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
+ * Author: Markus Niebel <markus.niebel@tq-group.com>
+ *
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/mxc_i2c.h>
+
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <i2c.h>
+#include <micrel.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <netdev.h>
+
+#include "tqma6_bb.h"
+
+/* UART */
+#define UART4_PAD_CTRL ( \
+ PAD_CTL_HYS | \
+ PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_PUE | \
+ PAD_CTL_PKE | \
+ PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_SLOW \
+ )
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+ NEW_PAD_CTRL(MX6_PAD_CSI0_DAT17__UART4_CTS_B, UART4_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_CSI0_DAT16__UART4_RTS_B, UART4_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_CSI0_DAT13__UART4_RX_DATA, UART4_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_CSI0_DAT12__UART4_TX_DATA, UART4_PAD_CTRL),
+};
+
+static void setup_iomuxc_uart4(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
+}
+
+/* MMC */
+#define USDHC2_PAD_CTRL ( \
+ PAD_CTL_HYS | \
+ PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST \
+ )
+
+#define USDHC2_CLK_PAD_CTRL ( \
+ PAD_CTL_HYS | \
+ PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST \
+ )
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ NEW_PAD_CTRL(MX6_PAD_SD2_CLK__SD2_CLK, USDHC2_CLK_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_SD2_CMD__SD2_CMD, USDHC2_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_SD2_DAT0__SD2_DATA0, USDHC2_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_SD2_DAT1__SD2_DATA1, USDHC2_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_SD2_DAT2__SD2_DATA2, USDHC2_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_SD2_DAT3__SD2_DATA3, USDHC2_PAD_CTRL),
+
+ NEW_PAD_CTRL(MX6_PAD_GPIO_4__GPIO1_IO04, USDHC2_PAD_CTRL), /* CD */
+ NEW_PAD_CTRL(MX6_PAD_GPIO_2__SD2_WP, USDHC2_PAD_CTRL), /* WP */
+};
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
+#define USDHC2_WP_GPIO IMX_GPIO_NR(1, 2)
+
+static struct fsl_esdhc_cfg usdhc2_cfg = {
+ .esdhc_base = USDHC2_BASE_ADDR,
+ .max_bus_width = 4,
+};
+
+int tqma6_bb_board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ if (cfg->esdhc_base == USDHC2_BASE_ADDR)
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+
+ return ret;
+}
+
+int tqma6_bb_board_mmc_getwp(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ if (cfg->esdhc_base == USDHC2_BASE_ADDR)
+ ret = gpio_get_value(USDHC2_WP_GPIO);
+
+ return ret;
+}
+
+int tqma6_bb_board_mmc_init(bd_t *bis)
+{
+ int ret;
+
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+
+ ret = gpio_request(USDHC2_CD_GPIO, "mmc-cd");
+ if (!ret)
+ gpio_direction_input(USDHC2_CD_GPIO);
+ ret = gpio_request(USDHC2_WP_GPIO, "mmc-wp");
+ if (!ret)
+ gpio_direction_input(USDHC2_WP_GPIO);
+
+ usdhc2_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ if(fsl_esdhc_initialize(bis, &usdhc2_cfg))
+ puts("WARNING: failed to initialize SD\n");
+
+ return 0;
+}
+
+/* Ethernet */
+#define ENET_PAD_CTRL ( \
+ PAD_CTL_HYS | \
+ PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_PUE | \
+ PAD_CTL_PKE | \
+ PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_SLOW \
+ )
+
+static iomux_v3_cfg_t const enet_pads[] = {
+ NEW_PAD_CTRL(MX6_PAD_ENET_MDC__ENET_MDC, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_MDIO__ENET_MDIO, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_GPIO_16__ENET_REF_CLK, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_RXD0__ENET_RX_DATA0, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_RXD1__ENET_RX_DATA1, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_CRS_DV__ENET_RX_EN, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_RX_ER__ENET_RX_ER, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_TXD0__ENET_TX_DATA0, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_TXD1__ENET_TX_DATA1, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_ENET_TX_EN__ENET_TX_EN, ENET_PAD_CTRL),
+ NEW_PAD_CTRL(MX6_PAD_GPIO_19__ENET_TX_ER, ENET_PAD_CTRL),
+
+ /* ENET1 reset */
+ NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, ENET_PAD_CTRL),
+ /* ENET1 interrupt */
+ NEW_PAD_CTRL(MX6_PAD_GPIO_9__GPIO1_IO09, ENET_PAD_CTRL),
+};
+
+#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 8)
+
+static void setup_iomuxc_enet(void)
+{
+ int ret;
+
+ imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+
+ /* Reset LAN8720 PHY */
+ ret = gpio_request(ENET_PHY_RESET_GPIO, "phy-reset");
+ if (!ret)
+ gpio_direction_output(ENET_PHY_RESET_GPIO , 0);
+ udelay(1000);
+ gpio_set_value(ENET_PHY_RESET_GPIO, 1);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return cpu_eth_init(bis);
+}
+
+/* GPIO */
+#define GPIO_PAD_CTRL ( \
+ PAD_CTL_HYS | \
+ PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_PUE | \
+ PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_SLOW \
+ )
+
+#define GPIO_OD_PAD_CTRL ( \
+ PAD_CTL_HYS | \
+ PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_PUE | \
+ PAD_CTL_ODE | \
+ PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_SLOW \
+ )
+
+static iomux_v3_cfg_t const gpio_pads[] = {
+ /* USB_H_PWR */
+ NEW_PAD_CTRL(MX6_PAD_GPIO_0__GPIO1_IO00, GPIO_PAD_CTRL),
+ /* USB_OTG_PWR */
+ NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, GPIO_PAD_CTRL),
+ /* PCIE_RST */
+ NEW_PAD_CTRL(MX6_PAD_NANDF_CLE__GPIO6_IO07, GPIO_OD_PAD_CTRL),
+ /* UART1_PWRON */
+ NEW_PAD_CTRL(MX6_PAD_DISP0_DAT14__GPIO5_IO08, GPIO_PAD_CTRL),
+ /* UART2_PWRON */
+ NEW_PAD_CTRL(MX6_PAD_DISP0_DAT16__GPIO5_IO10, GPIO_PAD_CTRL),
+ /* UART3_PWRON */
+ NEW_PAD_CTRL(MX6_PAD_DISP0_DAT18__GPIO5_IO12, GPIO_PAD_CTRL),
+};
+
+#define GPIO_USB_H_PWR IMX_GPIO_NR(1, 0)
+#define GPIO_USB_OTG_PWR IMX_GPIO_NR(3, 22)
+#define GPIO_PCIE_RST IMX_GPIO_NR(6, 7)
+#define GPIO_UART1_PWRON IMX_GPIO_NR(5, 8)
+#define GPIO_UART2_PWRON IMX_GPIO_NR(5, 10)
+#define GPIO_UART3_PWRON IMX_GPIO_NR(5, 12)
+
+static void gpio_init(void)
+{
+ int ret;
+
+ imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
+
+ ret = gpio_request(GPIO_USB_H_PWR, "usb-h-pwr");
+ if (!ret)
+ gpio_direction_output(GPIO_USB_H_PWR, 1);
+ ret = gpio_request(GPIO_USB_OTG_PWR, "usb-otg-pwr");
+ if (!ret)
+ gpio_direction_output(GPIO_USB_OTG_PWR, 1);
+ ret = gpio_request(GPIO_PCIE_RST, "pcie-reset");
+ if (!ret)
+ gpio_direction_output(GPIO_PCIE_RST, 1);
+ ret = gpio_request(GPIO_UART1_PWRON, "uart1-pwr");
+ if (!ret)
+ gpio_direction_output(GPIO_UART1_PWRON, 0);
+ ret = gpio_request(GPIO_UART2_PWRON, "uart2-pwr");
+ if (!ret)
+ gpio_direction_output(GPIO_UART2_PWRON, 0);
+ ret = gpio_request(GPIO_UART3_PWRON, "uart3-pwr");
+ if (!ret)
+ gpio_direction_output(GPIO_UART3_PWRON, 0);
+}
+
+void tqma6_iomuxc_spi(void)
+{
+ /* No SPI on this baseboard */
+}
+
+int tqma6_bb_board_early_init_f(void)
+{
+ setup_iomuxc_uart4();
+
+ return 0;
+}
+
+int tqma6_bb_board_init(void)
+{
+ setup_iomuxc_enet();
+
+ gpio_init();
+
+ /* Turn the UART-couplers on one-after-another */
+ gpio_set_value(GPIO_UART1_PWRON, 1);
+ mdelay(10);
+ gpio_set_value(GPIO_UART2_PWRON, 1);
+ mdelay(10);
+ gpio_set_value(GPIO_UART3_PWRON, 1);
+
+ return 0;
+}
+
+int tqma6_bb_board_late_init(void)
+{
+ return 0;
+}
+
+const char *tqma6_bb_get_boardname(void)
+{
+ return "WRU-IV";
+}
+
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ /* 8 bit bus width */
+ {"emmc", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ { NULL, 0 },
+};
+
+int misc_init_r(void)
+{
+ add_board_boot_modes(board_boot_modes);
+
+ return 0;
+}
+
+#define WRU4_USB_H1_PWR IMX_GPIO_NR(1, 0)
+#define WRU4_USB_OTG_PWR IMX_GPIO_NR(3, 22)
+
+int board_ehci_hcd_init(int port)
+{
+ int ret;
+
+ ret = gpio_request(WRU4_USB_H1_PWR, "usb-h1-pwr");
+ if (!ret)
+ gpio_direction_output(WRU4_USB_H1_PWR, 1);
+
+ ret = gpio_request(WRU4_USB_OTG_PWR, "usb-OTG-pwr");
+ if (!ret)
+ gpio_direction_output(WRU4_USB_OTG_PWR, 1);
+
+ return 0;
+}
+
+int board_ehci_power(int port, int on)
+{
+ if (port)
+ gpio_set_value(WRU4_USB_OTG_PWR, on);
+ else
+ gpio_set_value(WRU4_USB_H1_PWR, on);
+
+ return 0;
+}
+
+/*
+ * Device Tree Support
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+void tqma6_bb_ft_board_setup(void *blob, bd_t *bd)
+{
+ /* TBD */
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/warp/warp.c b/board/warp/warp.c
index 21ac5e7d74..49dfdb6717 100644
--- a/board/warp/warp.c
+++ b/board/warp/warp.c
@@ -15,13 +15,17 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <common.h>
#include <watchdog.h>
#include <fsl_esdhc.h>
+#include <i2c.h>
#include <mmc.h>
#include <usb.h>
+#include <power/pmic.h>
+#include <power/max77696_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -35,6 +39,11 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SRE_FAST | PAD_CTL_HYS | \
PAD_CTL_LVE)
+#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -88,6 +97,45 @@ int board_usb_phy_mode(int port)
return USB_INIT_DEVICE;
}
+/* I2C1 for PMIC */
+#define I2C_PMIC 0
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+struct i2c_pads_info i2c_pad_info1 = {
+ .sda = {
+ .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
+ .gp = IMX_GPIO_NR(3, 13),
+ },
+ .scl = {
+ .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
+ .gp = IMX_GPIO_NR(3, 12),
+ },
+};
+
+int power_init_board(void)
+{
+ struct pmic *p;
+ int ret;
+ unsigned int reg;
+
+ ret = power_max77696_init(I2C_PMIC);
+ if (ret)
+ return ret;
+
+ p = pmic_get("MAX77696");
+ if (!p)
+ return -EINVAL;
+
+ ret = pmic_reg_read(p, CID, ®);
+ if (ret)
+ return ret;
+
+ printf("PMIC: MAX77696 detected, rev=0x%x\n", reg);
+
+ return pmic_probe(p);
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -99,6 +147,8 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
return 0;
}
diff --git a/configs/cgtqmx6qeval_defconfig b/configs/cgtqmx6qeval_defconfig
index e1eb871b4a..6fd29a00ae 100644
--- a/configs/cgtqmx6qeval_defconfig
+++ b/configs/cgtqmx6qeval_defconfig
@@ -1,6 +1,9 @@
CONFIG_ARM=y
CONFIG_TARGET_CGTQMX6EVAL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx6eval/imximage.cfg,MX6Q"
+CONFIG_CMD_NET=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 6be5c179ee..2aba3594ea 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -1,4 +1,5 @@
CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
CONFIG_TARGET_CM_FX6=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
@@ -9,4 +10,23 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_USB=y
+CONFIG_CMD_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MX6=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
diff --git a/configs/mx6qpsabreauto_defconfig b/configs/mx6qpsabreauto_defconfig
new file mode 100644
index 0000000000..293e3f27a5
--- /dev/null
+++ b/configs/mx6qpsabreauto_defconfig
@@ -0,0 +1,4 @@
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q"
+CONFIG_SPI_FLASH=y
diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig
new file mode 100644
index 0000000000..b6eefafed2
--- /dev/null
+++ b/configs/mx6ul_14x14_evk_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6UL"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6UL_14X14_EVK=y
+CONFIG_SPL=y
diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig
new file mode 100644
index 0000000000..66ac0b1b7f
--- /dev/null
+++ b/configs/tqma6s_wru4_mmc_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_TQMA6=y
+CONFIG_TQMA6S=y
+CONFIG_WRU4=y
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Enter password in %d seconds to stop autoboot\n"
+CONFIG_AUTOBOOT_ENCRYPTION=y
+CONFIG_AUTOBOOT_STOP_STR_SHA256="36a9e7f1c95b82ffb99743e0c5c4ce95d83c9a430aac59f84ef3cbfab6145068"
+CONFIG_PCA9551_LED=y
+CONFIG_SPI_FLASH=y
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 2012f994c8..57a650f750 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -45,11 +45,15 @@ static unsigned long gpio_ports[] = {
#endif
#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
[4] = GPIO5_BASE_ADDR,
+#ifndef CONFIG_MX6UL
[5] = GPIO6_BASE_ADDR,
#endif
+#endif
#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
+#ifndef CONFIG_MX6UL
[6] = GPIO7_BASE_ADDR,
#endif
+#endif
};
static int mxc_gpio_direction(unsigned int gpio,
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index b3c50aaf30..f1056e21a2 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -523,7 +523,8 @@ static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
#endif
static struct mxc_i2c_bus mxc_i2c_buses[] = {
-#if defined(CONFIG_LS102XA) || defined(CONFIG_FSL_LSCH3)
+#if defined(CONFIG_LS102XA) || defined(CONFIG_FSL_LSCH3) || \
+ defined(CONFIG_VF610)
{ 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
{ 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
{ 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index c4719e6f36..0510bf02f4 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -341,6 +341,9 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
err = esdhc_setup_data(mmc, data);
if(err)
return err;
+
+ if (data->flags & MMC_DATA_READ)
+ check_and_invalidate_dcache_range(cmd, data);
}
/* Figure out the transfer arguments */
@@ -437,6 +440,11 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
}
} while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
+ /*
+ * Need invalidate the dcache here again to avoid any
+ * cache-fill during the DMA operations such as the
+ * speculative pre-fetching etc.
+ */
if (data->flags & MMC_DATA_READ)
check_and_invalidate_dcache_range(cmd, data);
#endif
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 4f0c040214..8b730ff3c5 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -42,6 +42,50 @@ config SPI_FLASH_BAR
Bank/Extended address registers are used to access the flash
which has size > 16MiB in 3-byte addressing.
+if SPI_FLASH
+
+config SPI_FLASH_ATMEL
+ bool "Atmel SPI flash support"
+ help
+ Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
+
+config SPI_FLASH_EON
+ bool "EON SPI flash support"
+ help
+ Add support for various EON SPI flash chips (EN25xxx)
+
+config SPI_FLASH_GIGADEVICE
+ bool "GigaDevice SPI flash support"
+ help
+ Add support for various GigaDevice SPI flash chips (GD25xxx)
+
+config SPI_FLASH_MACRONIX
+ bool "Macronix SPI flash support"
+ help
+ Add support for various Macronix SPI flash chips (MX25Lxxx)
+
+config SPI_FLASH_SPANSION
+ bool "Spansion SPI flash support"
+ help
+ Add support for various Spansion SPI flash chips (S25FLxxx)
+
+config SPI_FLASH_STMICRO
+ bool "STMicro SPI flash support"
+ help
+ Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
+
+config SPI_FLASH_SST
+ bool "SST SPI flash support"
+ help
+ Add support for various SST SPI flash chips (SST25xxx)
+
+config SPI_FLASH_WINBOND
+ bool "Winbond SPI flash support"
+ help
+ Add support for various Winbond SPI flash chips (W25xxx)
+
+endif
+
config SPI_FLASH_DATAFLASH
bool "AT45xxx DataFlash support"
depends on SPI_FLASH && DM_SPI_FLASH
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 9225d37285..c5dcbbbced 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -67,13 +67,6 @@ DECLARE_GLOBAL_DATA_PTR;
#undef DEBUG
-struct nbuf {
- uint8_t data[1500]; /**< actual data */
- int length; /**< actual length */
- int used; /**< buffer in use or not */
- uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
-};
-
#ifdef CONFIG_FEC_MXC_SWAP_PACKET
static void swap_packet(uint32_t *packet, int length)
{
@@ -775,7 +768,6 @@ static int fec_recv(struct eth_device *dev)
struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
unsigned long ievent;
int frame_length, len = 0;
- struct nbuf *frame;
uint16_t bd_status;
uint32_t addr, size, end;
int i;
@@ -835,12 +827,11 @@ static int fec_recv(struct eth_device *dev)
/*
* Get buffer address and size
*/
- frame = (struct nbuf *)readl(&rbd->data_pointer);
+ addr = readl(&rbd->data_pointer);
frame_length = readw(&rbd->data_length) - 4;
/*
* Invalidate data cache over the buffer
*/
- addr = (uint32_t)frame;
end = roundup(addr + frame_length, ARCH_DMA_MINALIGN);
addr &= ~(ARCH_DMA_MINALIGN - 1);
invalidate_dcache_range(addr, end);
@@ -849,16 +840,15 @@ static int fec_recv(struct eth_device *dev)
* Fill the buffer and pass it to upper layers
*/
#ifdef CONFIG_FEC_MXC_SWAP_PACKET
- swap_packet((uint32_t *)frame->data, frame_length);
+ swap_packet((uint32_t *)addr, frame_length);
#endif
- memcpy(buff, frame->data, frame_length);
+ memcpy(buff, (char *)addr, frame_length);
net_process_received_packet(buff, frame_length);
len = frame_length;
} else {
if (bd_status & FEC_RBD_ERR)
- printf("error frame: 0x%08lx 0x%08x\n",
- (ulong)rbd->data_pointer,
- bd_status);
+ printf("error frame: 0x%08x 0x%08x\n",
+ addr, bd_status);
}
/*
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index ae86f041f3..4ad6df36c2 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
+obj-$(CONFIG_POWER_MAX77696) += pmic_max77696.o
obj-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
diff --git a/drivers/power/pmic/pmic_max77696.c b/drivers/power/pmic/pmic_max77696.c
new file mode 100644
index 0000000000..93d92f5794
--- /dev/null
+++ b/drivers/power/pmic/pmic_max77696.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/max77696_pmic.h>
+
+int power_max77696_init(unsigned char bus)
+{
+ static const char name[] = "MAX77696";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
+
+ p->name = name;
+ p->interface = PMIC_I2C;
+ p->number_of_regs = PMIC_NUM_OF_REGS;
+ p->hw.i2c.addr = CONFIG_POWER_MAX77696_I2C_ADDR;
+ p->hw.i2c.tx_num = 1;
+ p->bus = bus;
+
+ return 0;
+}
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 0d893c9d06..3c6c9679f9 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -115,7 +115,7 @@ static int read_cpu_temperature(struct udevice *dev)
writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
/* milli_Tmeas = c2 - Nmeas * c1 */
- temperature = (c2 - n_meas * c1)/1000;
+ temperature = (long)(c2 - n_meas * c1)/1000;
/* power down anatop thermal sensor */
writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
@@ -130,16 +130,12 @@ int imx_thermal_get_temp(struct udevice *dev, int *temp)
int cpu_tmp = 0;
cpu_tmp = read_cpu_temperature(dev);
- while (cpu_tmp > priv->minc && cpu_tmp < priv->maxc) {
- if (cpu_tmp >= priv->critical) {
- printf("CPU Temperature (%dC) too close to max (%dC)",
- cpu_tmp, priv->maxc);
- puts(" waiting...\n");
- udelay(5000000);
- cpu_tmp = read_cpu_temperature(dev);
- } else {
- break;
- }
+ while (cpu_tmp >= priv->critical) {
+ printf("CPU Temperature (%dC) too close to max (%dC)",
+ cpu_tmp, priv->maxc);
+ puts(" waiting...\n");
+ udelay(5000000);
+ cpu_tmp = read_cpu_temperature(dev);
}
*temp = cpu_tmp;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 3fa5b2e37e..716dad478d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -1,3 +1,4 @@
+menu USB
config USB_ARCH_HAS_HCD
def_bool y
@@ -59,4 +60,32 @@ config USB_STORAGE
Say Y here if you want to connect USB mass storage devices to your
board's USB port.
+config USB_KEYBOARD
+ bool "USB Keyboard support"
+ ---help---
+ Say Y here if you want to use a USB keyboard for U-Boot command line
+ input.
+
+if USB_KEYBOARD
+
+choice
+ prompt "USB keyboard polling"
+ optional
+ ---help---
+ Enable a polling mechanism for USB keyboard.
+
+ config SYS_USB_EVENT_POLL
+ bool "Interrupt polling"
+
+ config SYS_USB_EVENT_POLL_VIA_INT_QUEUE
+ bool "Poll via interrupt queue"
+
+ config SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+ bool "Poll via control EP"
+
+endchoice
+
endif
+
+endif
+endmenu
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8705c7c44c..b30b43da3b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -52,6 +52,13 @@ config USB_EHCI
if USB_EHCI_HCD
+config USB_EHCI_MX6
+ bool "Support for i.MX6 on-chip EHCI USB controller"
+ depends on ARCH_MX6
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on i.MX6 SoCs.
+
config USB_EHCI_UNIPHIER
bool "Support for UniPhier on-chip EHCI USB controller"
depends on ARCH_UNIPHIER && OF_CONTROL
diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index dd012f1c3e..4a5d4fb080 100644
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -26,9 +26,6 @@
#define CONFIG_MXC_UART
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index dd06c05b8e..fb5b82ee33 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -32,36 +32,116 @@
/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
-#define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb"
+/* Thermal support */
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+
+/* Framebuffer */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#ifdef CONFIG_MX6DL
+#define CONFIG_IPUV3_CLK 198000000
+#else
+#define CONFIG_IPUV3_CLK 264000000
+#endif
+#define CONFIG_IMX_HDMI
+
+/* SATA */
+#define CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+
+/* Command definition */
+
+#define CONFIG_MXC_UART_BASE UART2_BASE
+#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONFIG_MMCROOT "/dev/mmcblk0p2"
+#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "boot_dir=/boot\0" \
- "console=ttymxc1\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_addr=0x18000000\0" \
+ "fdtfile=imx6q-qmx6.dtb\0" \
+ "fdt_addr_r=0x18000000\0" \
"boot_fdt=try\0" \
- "mmcdev=1\0" \
+ "ip_dyn=yes\0" \
+ "console=" CONFIG_CONSOLE_DEV "\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if mmc dev ${mmcdev}; then " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
- "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
- "${boot_dir}/${image}\0" \
- "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
- "${boot_dir}/${fdt_file}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr_r}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
@@ -71,27 +151,44 @@
"fi; " \
"else " \
"bootz; " \
- "fi;\0"
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
+ "bootz ${loadaddr} - ${fdt_addr_r}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else "\
- "echo ERR: Fail to boot from mmc; " \
- "fi; " \
- "fi; " \
- "else echo ERR: Fail to boot from mmc; fi"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "CGT-QMX6-Quad U-Boot > "
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 231f4ba33d..bbd9f38749 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -50,7 +50,6 @@
sizeof(CONFIG_SYS_PROMPT) + 16)
/* SPI flash */
-#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 25000000
@@ -163,14 +162,6 @@
/* SPI */
#define CONFIG_SPI
#define CONFIG_MXC_SPI
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_WINBOND
/* NAND */
#ifndef CONFIG_SPL_BUILD
@@ -199,20 +190,13 @@
#define CONFIG_NET_RETRY_COUNT 5
/* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
#define CONFIG_SYS_STDIO_DEREGISTER
/* I2C */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
@@ -258,7 +242,6 @@
#define CONFIG_VIDEO_IPUV3
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index cba58aa70f..12744a6143 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -29,11 +29,6 @@
#define CONFIG_MXC_UART
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 2cbd5e0aff..7c90812dbf 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -165,11 +165,6 @@
#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
-#define CONFIG_CMD_FUSE /* eFUSE read/write support */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* Ethernet support */
#define CONFIG_FEC_MXC
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 21c5dce097..0a585b700b 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -61,7 +61,7 @@
#define CONFIG_SPL_LIBDISK_SUPPORT
#endif
-#if defined(CONFIG_MX6SX)
+#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)
#define CONFIG_SPL_BSS_START_ADDR 0x88200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 53f725d14e..ad2629da72 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -43,6 +43,7 @@
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
@@ -113,11 +114,11 @@
"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
"mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
"loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 86d7b16777..ef4cb68e8d 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -17,11 +17,11 @@
#ifndef __MX6_COMMON_H
#define __MX6_COMMON_H
+#ifndef CONFIG_MX6UL
#define CONFIG_ARM_ERRATA_743622
#define CONFIG_ARM_ERRATA_751472
#define CONFIG_ARM_ERRATA_794072
#define CONFIG_ARM_ERRATA_761320
-#define CONFIG_BOARD_POSTCLK_INIT
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_L2_PL310
@@ -29,6 +29,8 @@
#endif
#define CONFIG_MP
+#endif
+#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_MXC_GPT_HCLK
#define CONFIG_SYS_NO_FLASH
@@ -52,7 +54,7 @@
#define CONFIG_REVISION_TAG
/* Boot options */
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6UL))
#define CONFIG_LOADADDR 0x82000000
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x87800000
@@ -111,4 +113,8 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
+/* Fuses */
+#define CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+
#endif
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 3d5bba75d3..634a09f349 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -20,8 +20,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_UART
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 22603442d7..11cf538b0a 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -12,11 +12,6 @@
#define CONFIG_MACH_TYPE 3529
#define CONFIG_MXC_UART_BASE UART4_BASE
#define CONFIG_CONSOLE_DEV "ttymxc3"
-#if defined CONFIG_MX6Q
-#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabreauto.dtb"
-#elif defined CONFIG_MX6DL
-#define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabreauto.dtb"
-#endif
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 47a37f4d3a..6a57841f5f 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -21,11 +21,6 @@
#define CONFIG_MXC_UART
-#define CONFIG_CMD_FUSE
-#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-#define CONFIG_MXC_OCOTP
-#endif
-
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
@@ -75,10 +70,12 @@
#define EMMC_ENV ""
#endif
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_file=undefined\0" \
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
@@ -148,9 +145,26 @@
"fi; " \
"else " \
"bootz; " \
- "fi;\0"
+ "fi;\0" \
+ "findfdt="\
+ "if test $fdt_file = undefined; then " \
+ "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
+ "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
+ "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
+ "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
+ "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
+ "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+ "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
+ "setenv fdt_file imx6q-sabresd.dtb; fi; " \
+ "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
+ "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
+ "if test $fdt_file = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi; " \
+ "fi;\0" \
+
#define CONFIG_BOOTCOMMAND \
+ "run findfdt;" \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
"if run loadbootscript; then " \
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 41162ca202..5f635ca6c5 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -19,11 +19,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONSOLE_DEV "ttymxc0"
#define CONFIG_MMCROOT "/dev/mmcblk1p2"
-#if defined(CONFIG_MX6Q)
-#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb"
-#elif defined(CONFIG_MX6DL)
-#define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb"
-#endif
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index a7da111ee9..3cecd94039 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -192,9 +192,4 @@
#define CONFIG_IMX6_THERMAL
-#define CONFIG_CMD_FUSE
-#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-#define CONFIG_MXC_OCOTP
-#endif
-
#endif /* __CONFIG_H */
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 2b278a8ab4..848bdcd674 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -178,11 +178,6 @@
#define CONFIG_IMX6_THERMAL
-#define CONFIG_CMD_FUSE
-#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-#define CONFIG_MXC_OCOTP
-#endif
-
#define CONFIG_CMD_TIME
#define CONFIG_FSL_QSPI
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
new file mode 100644
index 0000000000..436b0227b9
--- /dev/null
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __MX6UL_14X14_EVK_CONFIG_H
+#define __MX6UL_14X14_EVK_CONFIG_H
+
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+#include <asm/imx-common/gpio.h>
+
+/* SPL options */
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#include "imx6_spl.h"
+
+#define CONFIG_MX6
+#define CONFIG_ROM_UNIFIED_SECTIONS
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* MMC Configs */
+#ifdef CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
+
+/* NAND pin conflicts with usdhc2 */
+#ifdef CONFIG_NAND_MXS
+#define CONFIG_SYS_FSL_USDHC_NUM 1
+#else
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#endif
+
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#endif
+
+#undef CONFIG_BOOTM_NETBSD
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
+
+#undef CONFIG_CMD_EXPORTENV
+#undef CONFIG_CMD_IMPORTENV
+
+/* I2C configs */
+#define CONFIG_CMD_I2C
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+#define PHYS_SDRAM_SIZE SZ_512M
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=imx6ul-14x14-evk.dtb\0" \
+ "fdt_addr=0x83000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT "=> "
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE SZ_8K
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (8 * SZ_64K)
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
+#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_BMODE
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#define CONFIG_FSL_QSPI
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 40000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define FSL_QSPI_FLASH_NUM 1
+#define FSL_QSPI_FLASH_SIZE SZ_32M
+#endif
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+#define CONFIG_IMX6_THERMAL
+
+#endif
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3bb2e8f870..dd4cb0f893 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -26,11 +26,6 @@
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/novena.h b/include/configs/novena.h
index d9b7250cad..0970fd7548 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -25,7 +25,6 @@
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_FAT_WRITE
-#define CONFIG_CMD_FUSE
#define CONFIG_CMD_MII
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
@@ -118,11 +117,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
-/* OCOTP Configs */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* PCI express */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index fb58acf508..0d06fce1eb 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -16,10 +16,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-/* FUSE Configs */
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
/* UART Configs */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/platinum.h b/include/configs/platinum.h
index fd1946160a..d65143240b 100644
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -23,7 +23,6 @@
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FUSE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MTDPARTS
@@ -103,9 +102,6 @@
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
-/* Fuse support */
-#define CONFIG_MXC_OCOTP
-
/* Environment in NAND */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET (16 << 20)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 397c95cbab..14985f859d 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -173,12 +173,6 @@
#define CONFIG_I2C_EDID
#endif
-/* Fuses */
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* Environment organization */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 2
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index e0c4ada711..f7fade12f1 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -100,10 +100,6 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
@@ -393,6 +389,8 @@
*/
#ifdef CONFIG_MBA6
#include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
#else
#error "No baseboard for the TQMa6 defined!"
#endif
diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h
new file mode 100644
index 0000000000..1c86bc0701
--- /dev/null
+++ b/include/configs/tqma6_wru4.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_TQMA6_WRU4_H
+#define __CONFIG_TQMA6_WRU4_H
+
+#define CONFIG_DEFAULT_FDT_FILE "imx6s-wru4.dtb"
+
+/* DTT sensors */
+#define CONFIG_DTT_SENSORS { 0, 1 }
+#define CONFIG_SYS_DTT_BUS_NUM 2
+
+/* Ethernet */
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 0x01
+#define CONFIG_PHY_SMSC
+
+/* UART */
+#define CONFIG_MXC_UART_BASE UART4_BASE
+#define CONFIG_CONSOLE_DEV "ttymxc3"
+
+#define CONFIG_MISC_INIT_R
+
+/* Watchdog */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
+
+/* Config on-board RTC */
+#define CONFIG_RTC_DS1337
+#define CONFIG_SYS_RTC_BUS_NUM 2
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+/* Turn off RTC square-wave output to save battery */
+#define CONFIG_SYS_RTC_DS1337_NOOSC
+#define CONFIG_CMD_DATE
+
+#define CONFIG_CMD_GPIO
+
+/* LED */
+#define CONFIG_CMD_LED
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BIT 0
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT1 1
+#define STATUS_LED_STATE1 STATUS_LED_ON
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT2 2
+#define STATUS_LED_STATE2 STATUS_LED_ON
+#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT3 3
+#define STATUS_LED_STATE3 STATUS_LED_ON
+#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT4 4
+#define STATUS_LED_STATE4 STATUS_LED_ON
+#define STATUS_LED_PERIOD4 (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT5 5
+#define STATUS_LED_STATE5 STATUS_LED_ON
+#define STATUS_LED_PERIOD5 (CONFIG_SYS_HZ / 2)
+
+/* Bootcounter */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_BOOTCOUNT_BE
+
+#endif /* __CONFIG_TQMA6_WRU4_H */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index f05b55a0e2..f4e9cf20c5 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -84,11 +84,6 @@
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 5a9bb33840..fa102bbae7 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -94,9 +94,16 @@
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300
-/* Fuses */
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77696
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
diff --git a/include/power/max77696_pmic.h b/include/power/max77696_pmic.h
new file mode 100644
index 0000000000..71cdf88054
--- /dev/null
+++ b/include/power/max77696_pmic.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MAX77696_PMIC_H__
+#define __MAX77696_PMIC_H__
+
+#define CONFIG_POWER_MAX77696_I2C_ADDR 0x3C
+
+enum {
+ L01_CNFG1 = 0x43,
+ L01_CNFG2,
+ L02_CNFG1,
+ L02_CNFG2,
+ L03_CNFG1,
+ L03_CNFG2,
+ L04_CNFG1,
+ L04_CNFG2,
+ L05_CNFG1,
+ L05_CNFG2,
+ L06_CNFG1,
+ L06_CNFG2,
+ L07_CNFG1,
+ L07_CNFG2,
+ L08_CNFG1,
+ L08_CNFG2,
+ L09_CNFG1,
+ L09_CNFG2,
+ L10_CNFG1,
+ L10_CNFG2,
+ LDO_INT1,
+ LDO_INT2,
+ LDO_INT1M,
+ LDO_INT2M,
+ LDO_CNFG3,
+ SW1_CNTRL,
+ SW2_CNTRL,
+ SW3_CNTRL,
+ SW4_CNTRL,
+ EPDCNFG,
+ EPDINTS,
+ EPDINT,
+ EPDINTM,
+ EPDVCOM,
+ EPDVEE,
+ EPDVNEG,
+ EPDVPOS,
+ EPDVDDH,
+ EPDSEQ,
+ EPDOKINTS,
+ CID = 0x9c,
+ PMIC_NUM_OF_REGS,
+};
+
+int power_max77696_init(unsigned char bus);
+
+#endif
diff --git a/include/thermal.h b/include/thermal.h
index 5d6101bec6..b197c0aaa7 100644
--- a/include/thermal.h
+++ b/include/thermal.h
@@ -13,7 +13,7 @@
int thermal_get_temp(struct udevice *dev, int *temp);
/**
- * struct struct dm_thermal_ops - Driver model Thermal operations
+ * struct dm_thermal_ops - Driver model Thermal operations
*
* The uclass interface is implemented by all Thermal devices which use
* driver model.
@@ -22,19 +22,11 @@ struct dm_thermal_ops {
/**
* Get the current temperature
*
- * The device provided is the slave device. It's parent controller
- * will be used to provide the communication.
- *
- * This must be called before doing any transfers with a Thermal slave.
- * It will enable and initialize any Thermal hardware as necessary,
- * and make sure that the SCK line is in the correct idle state. It is
- * not allowed to claim the same bus for several slaves without
- * releasing the bus in between.
+ * This must be called before doing any transfers with a Thermal device.
+ * It will enable and initialize any Thermal hardware as necessary.
*
* @dev: The Thermal device
- *
- * Returns: 0 if the bus was claimed successfully, or a negative value
- * if it wasn't.
+ * @temp: pointer that returns the measured temperature
*/
int (*get_temp)(struct udevice *dev, int *temp);
};
diff --git a/tools/imximage.c b/tools/imximage.c
index 6f469ae633..909efaba2d 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -21,7 +21,10 @@
static table_entry_t imximage_cmds[] = {
{CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
{CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", },
- {CMD_DATA, "DATA", "Reg Write Data", },
+ {CMD_WRITE_DATA, "DATA", "Reg Write Data", },
+ {CMD_WRITE_CLR_BIT, "CLR_BIT", "Reg clear bit", },
+ {CMD_CHECK_BITS_SET, "CHECK_BITS_SET", "Reg Check bits set", },
+ {CMD_CHECK_BITS_CLR, "CHECK_BITS_CLR", "Reg Check bits clr", },
{CMD_CSF, "CSF", "Command Sequence File", },
{CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", },
{-1, "", "", },
@@ -62,7 +65,7 @@ static table_entry_t imximage_boot_loadsize[] = {
*/
static table_entry_t imximage_versions[] = {
{IMXIMAGE_V1, "", " (i.MX25/35/51 compatible)", },
- {IMXIMAGE_V2, "", " (i.MX53/6 compatible)", },
+ {IMXIMAGE_V2, "", " (i.MX53/6/7 compatible)", },
{-1, "", " (Invalid)", },
};
@@ -79,6 +82,7 @@ static uint32_t imximage_csf_size = UNDEFINED;
static uint32_t imximage_init_loadsize;
static set_dcd_val_t set_dcd_val;
+static set_dcd_param_t set_dcd_param;
static set_dcd_rst_t set_dcd_rst;
static set_imx_hdr_t set_imx_hdr;
static uint32_t max_dcd_entries;
@@ -156,6 +160,43 @@ static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno,
}
}
+static void set_dcd_param_v2(struct imx_header *imxhdr, uint32_t dcd_len,
+ int32_t cmd)
+{
+ dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
+
+ switch (cmd) {
+ case CMD_WRITE_DATA:
+ dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
+ dcd_v2->write_dcd_command.length = cpu_to_be16(
+ dcd_len * sizeof(dcd_addr_data_t) + 4);
+ dcd_v2->write_dcd_command.param = DCD_WRITE_DATA_PARAM;
+ break;
+ case CMD_WRITE_CLR_BIT:
+ dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
+ dcd_v2->write_dcd_command.length = cpu_to_be16(
+ dcd_len * sizeof(dcd_addr_data_t) + 4);
+ dcd_v2->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM;
+ break;
+ /*
+ * Check data command only supports one entry,
+ * so use 0xC = size(address + value + command).
+ */
+ case CMD_CHECK_BITS_SET:
+ dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
+ dcd_v2->write_dcd_command.length = cpu_to_be16(0xC);
+ dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
+ break;
+ case CMD_CHECK_BITS_CLR:
+ dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
+ dcd_v2->write_dcd_command.length = cpu_to_be16(0xC);
+ dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
+ break;
+ default:
+ break;
+ }
+}
+
static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno,
int fld, uint32_t value, uint32_t off)
{
@@ -200,10 +241,7 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
dcd_v2->header.length = cpu_to_be16(
dcd_len * sizeof(dcd_addr_data_t) + 8);
dcd_v2->header.version = DCD_VERSION;
- dcd_v2->write_dcd_command.tag = DCD_COMMAND_TAG;
- dcd_v2->write_dcd_command.length = cpu_to_be16(
- dcd_len * sizeof(dcd_addr_data_t) + 4);
- dcd_v2->write_dcd_command.param = DCD_COMMAND_PARAM;
+ set_dcd_param_v2(imxhdr, dcd_len, CMD_WRITE_DATA);
}
static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len,
@@ -266,12 +304,14 @@ static void set_hdr_func(void)
switch (imximage_version) {
case IMXIMAGE_V1:
set_dcd_val = set_dcd_val_v1;
+ set_dcd_param = NULL;
set_dcd_rst = set_dcd_rst_v1;
set_imx_hdr = set_imx_hdr_v1;
max_dcd_entries = MAX_HW_CFG_SIZE_V1;
break;
case IMXIMAGE_V2:
set_dcd_val = set_dcd_val_v2;
+ set_dcd_param = set_dcd_param_v2;
set_dcd_rst = set_dcd_rst_v2;
set_imx_hdr = set_imx_hdr_v2;
max_dcd_entries = MAX_HW_CFG_SIZE_V2;
@@ -396,8 +436,13 @@ static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token,
if (unlikely(cmd_ver_first != 1))
cmd_ver_first = 0;
break;
- case CMD_DATA:
+ case CMD_WRITE_DATA:
+ case CMD_WRITE_CLR_BIT:
+ case CMD_CHECK_BITS_SET:
+ case CMD_CHECK_BITS_CLR:
value = get_cfg_value(token, name, lineno);
+ if (set_dcd_param)
+ (*set_dcd_param)(imxhdr, dcd_len, cmd);
(*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len);
if (unlikely(cmd_ver_first != 1))
cmd_ver_first = 0;
@@ -436,20 +481,30 @@ static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd,
break;
case CFG_REG_ADDRESS:
case CFG_REG_VALUE:
- if (*cmd != CMD_DATA)
- return;
+ switch(*cmd) {
+ case CMD_WRITE_DATA:
+ case CMD_WRITE_CLR_BIT:
+ case CMD_CHECK_BITS_SET:
+ case CMD_CHECK_BITS_CLR:
- value = get_cfg_value(token, name, lineno);
- (*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len);
+ value = get_cfg_value(token, name, lineno);
+ if (set_dcd_param)
+ (*set_dcd_param)(imxhdr, *dcd_len, *cmd);
+ (*set_dcd_val)(imxhdr, name, lineno, fld, value,
+ *dcd_len);
- if (fld == CFG_REG_VALUE) {
- (*dcd_len)++;
- if (*dcd_len > max_dcd_entries) {
- fprintf(stderr, "Error: %s[%d] -"
- "DCD table exceeds maximum size(%d)\n",
- name, lineno, max_dcd_entries);
- exit(EXIT_FAILURE);
+ if (fld == CFG_REG_VALUE) {
+ (*dcd_len)++;
+ if (*dcd_len > max_dcd_entries) {
+ fprintf(stderr, "Error: %s[%d] -"
+ "DCD table exceeds maximum size(%d)\n",
+ name, lineno, max_dcd_entries);
+ exit(EXIT_FAILURE);
+ }
}
+ break;
+ default:
+ break;
}
break;
default:
diff --git a/tools/imximage.h b/tools/imximage.h
index 36fe0958fe..d41c74f327 100644
--- a/tools/imximage.h
+++ b/tools/imximage.h
@@ -42,19 +42,27 @@
#define FLASH_LOADSIZE_SATA FLASH_LOADSIZE_STANDARD
#define FLASH_LOADSIZE_QSPI 0x0 /* entire image */
-#define IVT_HEADER_TAG 0xD1
-#define IVT_VERSION 0x40
-#define DCD_HEADER_TAG 0xD2
-#define DCD_COMMAND_TAG 0xCC
-#define DCD_VERSION 0x40
-#define DCD_COMMAND_PARAM 0x4
+/* Command tags and parameters */
+#define IVT_HEADER_TAG 0xD1
+#define IVT_VERSION 0x40
+#define DCD_HEADER_TAG 0xD2
+#define DCD_VERSION 0x40
+#define DCD_WRITE_DATA_COMMAND_TAG 0xCC
+#define DCD_WRITE_DATA_PARAM 0x4
+#define DCD_WRITE_CLR_BIT_PARAM 0xC
+#define DCD_CHECK_DATA_COMMAND_TAG 0xCF
+#define DCD_CHECK_BITS_SET_PARAM 0x14
+#define DCD_CHECK_BITS_CLR_PARAM 0x04
enum imximage_cmd {
CMD_INVALID,
CMD_IMAGE_VERSION,
CMD_BOOT_FROM,
CMD_BOOT_OFFSET,
- CMD_DATA,
+ CMD_WRITE_DATA,
+ CMD_WRITE_CLR_BIT,
+ CMD_CHECK_BITS_SET,
+ CMD_CHECK_BITS_CLR,
CMD_CSF,
};
@@ -129,6 +137,7 @@ typedef struct {
ivt_header_t header;
write_dcd_command_t write_dcd_command;
dcd_addr_data_t addr_data[MAX_HW_CFG_SIZE_V2];
+ uint32_t padding[1]; /* end up on an 8-byte boundary */
} dcd_v2_t;
typedef struct {
@@ -167,6 +176,9 @@ typedef void (*set_dcd_val_t)(struct imx_header *imxhdr,
int fld, uint32_t value,
uint32_t off);
+typedef void (*set_dcd_param_t)(struct imx_header *imxhdr, uint32_t dcd_len,
+ int32_t cmd);
+
typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr,
uint32_t dcd_len,
char *name, int lineno);