leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

vbe: Add a test for the VBE flow into U-Boot proper

Browse Source 
Add a test which checks that VBE boots correctly from TPL through to
U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2022-10-20 18:23:20 -06:00 committed by Tom Rini
parent 7f3470bfaa
commit 77bec9e3d8
2 changed files with 75 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
arch/sandbox/dts/test.dts
View File

@ -37,6 +37,8 @@
i2c0 = "/i2c@0";
mmc0 = "/mmc0";
mmc1 = "/mmc1";
mmc2 = "/mmc2";
mmc3 = "/mmc3";
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
@ -92,6 +94,11 @@
compatible = "u-boot,distro-efi";
};
/*
* This is used for the VBE OS-request tests. A FAT filesystem
* created in a partition with the VBE information appearing
* before the parititon starts
*/
firmware0 {
u-boot,dm-vpl;
compatible = "fwupd,vbe-simple";
@ -104,6 +111,28 @@
version-offset = <0x800>;
version-size = <0x100>;
};
/*
* This is used for the VBE VPL tests. The MMC device holds the
* binman image.bin file. The test progresses through each phase
* of U-Boot, loading each in turn from MMC.
*
* Note that the test enables this node (and mmc3) before
* running U-Boot
*/
firmware1 {
u-boot,dm-vpl;
status = "disabled";
compatible = "fwupd,vbe-simple";
storage = "mmc3";
skip-offset = <0x400000>;
area-start = <0>;
area-size = <0xe00000>;
state-offset = <0xdffc00>;
state-size = <0x40>;
version-offset = <0xdffe00>;
version-size = <0x100>;
};
};
fuzzing-engine {
@ -976,6 +1005,14 @@
compatible = "sandbox,mmc";
};
/* This is used for VBE VPL tests */
mmc3 {
status = "disabled";
compatible = "sandbox,mmc";
filename = "image.bin";
non-removable;
};
pch {
compatible = "sandbox,pch";
};

38
test/py/tests/test_vbe_vpl.py Normal file
View File

@ -0,0 +1,38 @@
# SPDX-License-Identifier: GPL-2.0+
# Copyright 2022 Google LLC
#
# Test addition of VBE
import os
import pytest
import u_boot_utils
@pytest.mark.boardspec('sandbox_vpl')
@pytest.mark.requiredtool('dtc')
def test_vbe_vpl(u_boot_console):
cons = u_boot_console
#cmd = [cons.config.build_dir + fname, '-v']
ram = os.path.join(cons.config.build_dir, 'ram.bin')
fdt = os.path.join(cons.config.build_dir, 'arch/sandbox/dts/test.dtb')
# Enable firmware1 and the mmc that it uses. These are needed for the full
# VBE flow.
u_boot_utils.run_and_log(
cons, f'fdtput -t s {fdt} /bootstd/firmware0 status disabled')
u_boot_utils.run_and_log(
cons, f'fdtput -t s {fdt} /bootstd/firmware1 status okay')
u_boot_utils.run_and_log(
cons, f'fdtput -t s {fdt} /mmc3 status okay')
# Remove any existing RAM file, so we don't have old data present
if os.path.exists(ram):
os.remove(ram)
flags = ['-p', os.path.join(cons.config.build_dir, 'image.bin'), '-w',
'-s', 'state.dtb']
cons.restart_uboot_with_flags(flags)
# Make sure that VBE was used in both VPL (to load SPL) and SPL (to load
# U-Boot
output = cons.run_command('vbe state')
assert output == 'Phases: VPL SPL'