Add Ethernet hardware MAC address framework to usbnet

Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).

This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
This commit is contained in:
Simon Glass
2011-06-13 16:13:10 -07:00
committed by Remy Bohmer
parent 291391bed5
commit 7616e78508
5 changed files with 72 additions and 30 deletions

View File

@@ -504,7 +504,7 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
dev->iobase = (int)base_addr;
dev->priv = priv;
eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]);
priv->dev = dev;
priv->mac_regs_p = (struct eth_mac_regs *)base_addr;

View File

@@ -80,6 +80,7 @@ int is_eth_dev_on_usb_host(void)
*/
static void probe_valid_drivers(struct usb_device *dev)
{
struct eth_device *eth;
int j;
for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
@@ -88,9 +89,10 @@ static void probe_valid_drivers(struct usb_device *dev)
/*
* ok, it is a supported eth device. Get info and fill it in
*/
eth = &usb_eth[usb_max_eth_dev].eth_dev;
if (prob_dev[j].get_info(dev,
&usb_eth[usb_max_eth_dev],
&usb_eth[usb_max_eth_dev].eth_dev)) {
eth)) {
/* found proper driver */
/* register with networking stack */
usb_max_eth_dev++;
@@ -100,7 +102,10 @@ static void probe_valid_drivers(struct usb_device *dev)
* call since eth_current_changed (internally called)
* relies on it
*/
eth_register(&usb_eth[usb_max_eth_dev - 1].eth_dev);
eth_register(eth);
if (eth_write_hwaddr(eth, "usbeth",
usb_max_eth_dev - 1))
puts("Warning: failed to set MAC address\n");
break;
}
}