ARM: rmobile: Add R8A77995 D3 Draak board

Add bits to support yet another board, the R8A77995 D3 Draak.
The DT file is from Linux 4.15-rc1 , commit
b35334447513c14a4dd55a67c269a743d4a4824b .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
This commit is contained in:
Marek Vasut 2017-10-08 20:41:18 +02:00 committed by Marek Vasut
parent d21f08ba81
commit 7387d4c234
9 changed files with 403 additions and 1 deletions

View File

@ -394,7 +394,8 @@ dtb-$(CONFIG_RCAR_GEN3) += \
r8a7795-salvator-x.dtb \
r8a7796-m3ulcb.dtb \
r8a7796-salvator-x.dtb \
r8a77970-eagle.dtb
r8a77970-eagle.dtb \
r8a77995-draak.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \

View File

@ -0,0 +1,124 @@
/*
* Device Tree Source for the Draak board
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "r8a77995.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Draak board based on r8a77995";
compatible = "renesas,draak", "renesas,r8a77995";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
chosen {
bootargs = "ignore_loglevel";
stdout-path = "serial0:115200n8";
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x18000000>;
};
};
&extal_clk {
clock-frequency = <48000000>;
};
&pfc {
avb0_pins: avb {
mux {
groups = "avb0_link", "avb0_mdc", "avb0_mii";
function = "avb0";
};
};
pwm0_pins: pwm0 {
groups = "pwm0_c";
function = "pwm0";
};
pwm1_pins: pwm1 {
groups = "pwm1_c";
function = "pwm1";
};
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
};
&ehci0 {
status = "okay";
};
&ohci0 {
status = "okay";
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio5>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
};
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm0 {
pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm1 {
pinctrl-0 = <&pwm1_pins>;
pinctrl-names = "default";
status = "okay";
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};

View File

@ -21,6 +21,11 @@ choice
prompt "Renesus ARM64 SoCs board select"
optional
config TARGET_DRAAK
bool "Draak board"
help
Support for Renesas R-Car Gen3 Draak platform
config TARGET_EAGLE
bool "Eagle board"
help
@ -41,6 +46,7 @@ endchoice
config SYS_SOC
default "rmobile"
source "board/renesas/draak/Kconfig"
source "board/renesas/eagle/Kconfig"
source "board/renesas/salvator-x/Kconfig"
source "board/renesas/ulcb/Kconfig"

View File

@ -0,0 +1,15 @@
if TARGET_DRAAK
config SYS_SOC
default "rmobile"
config SYS_BOARD
default "draak"
config SYS_VENDOR
default "renesas"
config SYS_CONFIG_NAME
default "draak"
endif

View File

@ -0,0 +1,6 @@
DRAAK BOARD
M: Marek Vasut <marek.vasut+renesas@gmail.com>
S: Maintained
F: board/renesas/draak/
F: include/configs/draak.h
F: configs/r8a77995_draak_defconfig

View File

@ -0,0 +1,9 @@
#
# board/renesas/draak/Makefile
#
# Copyright (C) 2015 Renesas Electronics Corporation
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := draak.o

133
board/renesas/draak/draak.c Normal file
View File

@ -0,0 +1,133 @@
/*
* board/renesas/draak/draak.c
* This file is Draak board support.
*
* Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <netdev.h>
#include <dm.h>
#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/rmobile.h>
#include <asm/arch/rcar-mstp.h>
#include <asm/arch/sh_sdhi.h>
#include <i2c.h>
#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
#define CPGWPCR 0xE6150904
#define CPGWPR 0xE615090C
#define CLK2MHZ(clk) (clk / 1000 / 1000)
void s_init(void)
{
struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
writel(0xA5A50000, CPGWPCR);
writel(0xFFFFFFFF, CPGWPR);
}
#define GSX_MSTP112 BIT(12) /* 3DG */
#define TMU0_MSTP125 BIT(25) /* secure */
#define TMU1_MSTP124 BIT(24) /* non-secure */
#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
#define DVFS_MSTP926 BIT(26)
#define HSUSB_MSTP704 BIT(4) /* HSUSB */
int board_early_init_f(void)
{
/* TMU0,1 */ /* which use ? */
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
/* DVFS for reset */
mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926);
#endif
return 0;
}
/* SYSC */
/* R/- 32 Power status register 2(3DG) */
#define SYSC_PWRSR2 0xE6180100
/* -/W 32 Power resume control register 2 (3DG) */
#define SYSC_PWRONCR2 0xE618010C
/* HSUSB block registers */
#define HSUSB_REG_LPSTS 0xE6590102
#define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14)
#define HSUSB_REG_UGCTRL2 0xE6590184
#define HSUSB_REG_UGCTRL2_USB0SEL 0x30
#define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
/* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
/* Configure the HSUSB block */
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, HSUSB_MSTP704);
/* Choice USB0SEL */
clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL,
HSUSB_REG_UGCTRL2_USB0SEL_EHCI);
/* low power status */
setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL);
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_memory_size() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
#define RST_BASE 0xE6160000
#define RST_CA57RESCNT (RST_BASE + 0x40)
#define RST_CA53RESCNT (RST_BASE + 0x44)
#define RST_RSTOUTCR (RST_BASE + 0x58)
#define RST_CA57_CODE 0xA5A5000F
#define RST_CA53_CODE 0x5A5A000F
void reset_cpu(ulong addr)
{
unsigned long midr, cputype;
asm volatile("mrs %0, midr_el1" : "=r" (midr));
cputype = (midr >> 4) & 0xfff;
if (cputype == 0xd03)
writel(RST_CA53_CODE, RST_CA53RESCNT);
else if (cputype == 0xd07)
writel(RST_CA57_CODE, RST_CA57RESCNT);
else
hang();
}

View File

@ -0,0 +1,61 @@
CONFIG_ARM=y
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_RCAR_GEN3=y
CONFIG_R8A77995=y
CONFIG_TARGET_DRAAK=y
CONFIG_DEFAULT_DEVICE_TREE="r8a77995-draak"
CONFIG_SMBIOS_PRODUCT_NAME=""
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC0,115200 rw root=/dev/nfs nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20"
CONFIG_DEFAULT_FDT_FILE="r8a77995-draak.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_CLK_RENESAS=y
CONFIG_DM_GPIO=y
CONFIG_RCAR_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CFI_FLASH=y
CONFIG_RENESAS_RPC_HF=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_SMBIOS_MANUFACTURER=""

47
include/configs/draak.h Normal file
View File

@ -0,0 +1,47 @@
/*
* include/configs/draak.h
* This file is Draak board configuration.
*
* Copyright (C) 2015 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __DRAAK_H
#define __DRAAK_H
#undef DEBUG
#include "rcar-gen3-common.h"
/* Ethernet RAVB */
#define CONFIG_NET_MULTI
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
/* Board Clock */
/* XTAL_CLK : 33.33MHz */
#define CONFIG_SYS_CLK_FREQ 33333333u
/* Generic Timer Definitions (use in assembler source) */
#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 1
#define CONFIG_SYS_MMC_ENV_PART 2
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_FLASH_SHOW_PROGRESS 45
#define CONFIG_MTD_DEVICE
#define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 }
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_WRITE_SWAPPED_DATA
#define CONFIG_CMD_CACHE
#endif /* __DRAAK_H */