From 730d25443aa894a32b9f66ebde3bfbf64b73ac7a Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Tue, 29 Nov 2016 16:13:40 +0100 Subject: [PATCH] mx6sx: Add initial support for Samtec VIN|ING 2000 board This patch adds initial support for Samtec VIN|ING 2000 board. Signed-off-by: Christoph Fritz Reviewed-by: Stefano Babic Acked-by: Marek Vasut --- arch/arm/cpu/armv7/mx6/Kconfig | 7 + board/samtec/vining_2000/Kconfig | 12 + board/samtec/vining_2000/MAINTAINERS | 6 + board/samtec/vining_2000/Makefile | 6 + board/samtec/vining_2000/imximage.cfg | 132 +++++++ board/samtec/vining_2000/vining_2000.c | 517 +++++++++++++++++++++++++ configs/vining_2000_defconfig | 31 ++ include/configs/vining_2000.h | 123 ++++++ 8 files changed, 834 insertions(+) create mode 100644 board/samtec/vining_2000/Kconfig create mode 100644 board/samtec/vining_2000/MAINTAINERS create mode 100644 board/samtec/vining_2000/Makefile create mode 100644 board/samtec/vining_2000/imximage.cfg create mode 100644 board/samtec/vining_2000/vining_2000.c create mode 100644 configs/vining_2000_defconfig create mode 100644 include/configs/vining_2000.h diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index a81d944028..8c96ba37c3 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -204,6 +204,12 @@ config TARGET_UDOO_NEO bool "UDOO Neo" select SUPPORT_SPL +config TARGET_SAMTEC_VINING_2000 + bool "samtec VIN|ING 2000" + select MX6SX + select DM + select DM_THERMAL + config TARGET_WANDBOARD bool "wandboard" select SUPPORT_SPL @@ -259,6 +265,7 @@ source "board/freescale/mx6ullevk/Kconfig" source "board/phytec/pcm058/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" +source "board/samtec/vining_2000/Kconfig" source "board/seco/Kconfig" source "board/solidrun/mx6cuboxi/Kconfig" source "board/technexion/pico-imx6ul/Kconfig" diff --git a/board/samtec/vining_2000/Kconfig b/board/samtec/vining_2000/Kconfig new file mode 100644 index 0000000000..3447c27fa4 --- /dev/null +++ b/board/samtec/vining_2000/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SAMTEC_VINING_2000 + +config SYS_BOARD + default "vining_2000" + +config SYS_VENDOR + default "samtec" + +config SYS_CONFIG_NAME + default "vining_2000" + +endif diff --git a/board/samtec/vining_2000/MAINTAINERS b/board/samtec/vining_2000/MAINTAINERS new file mode 100644 index 0000000000..027e52736f --- /dev/null +++ b/board/samtec/vining_2000/MAINTAINERS @@ -0,0 +1,6 @@ +VINING_2000 BOARD +M: Ingo Schroeck +S: Maintained +F: board/samtec/vining_2000/ +F: include/configs/vining_2000.h +F: configs/vining_2000_defconfig diff --git a/board/samtec/vining_2000/Makefile b/board/samtec/vining_2000/Makefile new file mode 100644 index 0000000000..1b32f66aaa --- /dev/null +++ b/board/samtec/vining_2000/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2016 samtec automotive software & electronics gmbh +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := vining_2000.o diff --git a/board/samtec/vining_2000/imximage.cfg b/board/samtec/vining_2000/imximage.cfg new file mode 100644 index 0000000000..4133ddad2e --- /dev/null +++ b/board/samtec/vining_2000/imximage.cfg @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2016 samtec automotive software & electronics gmbh + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define __ASSEMBLY__ +#include + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* Enable all clocks */ +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff +DATA 4 0x020c4084 0xffffffff + +/* IOMUX - DDR IO Type */ +DATA 4 0x020e0618 0x000c0000 +DATA 4 0x020e05fc 0x00000000 + +/* Clock */ +DATA 4 0x020e032c 0x00000030 + +/* Address */ +DATA 4 0x020e0300 0x00000028 +DATA 4 0x020e02fc 0x00000028 +DATA 4 0x020e05f4 0x00000028 + +/* Control */ +DATA 4 0x020e0340 0x00000028 + +DATA 4 0x020e0320 0x00000000 +DATA 4 0x020e0310 0x00000028 +DATA 4 0x020e0314 0x00000028 +DATA 4 0x020e0614 0x00000028 + +/* Data Strobe */ +DATA 4 0x020e05f8 0x00020000 +DATA 4 0x020e0330 0x00000028 +DATA 4 0x020e0334 0x00000028 +DATA 4 0x020e0338 0x00000028 +DATA 4 0x020e033c 0x00000028 + +/* Data */ +DATA 4 0x020e0608 0x00020000 +DATA 4 0x020e060c 0x00000028 +DATA 4 0x020e0610 0x00000028 +DATA 4 0x020e061c 0x00000028 +DATA 4 0x020e0620 0x00000028 +DATA 4 0x020e02ec 0x00000028 +DATA 4 0x020e02f0 0x00000028 +DATA 4 0x020e02f4 0x00000028 +DATA 4 0x020e02f8 0x00000028 + +/* Calibrations - ZQ */ +DATA 4 0x021b0800 0xa1390003 + +/* Write leveling */ +DATA 4 0x021b080c 0x00290025 +DATA 4 0x021b0810 0x00210022 + +/* DQS Read Gate */ +DATA 4 0x021b083c 0x4142013a +DATA 4 0x021b0840 0x012e0123 + +/* Read/Write Delay */ +DATA 4 0x021b0848 0x43474949 +DATA 4 0x021b0850 0x38383c38 + +/* Read data bit delay */ +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +/* Complete calibration by forced measurement */ +DATA 4 0x021b08b8 0x00000800 + +/* MMDC init - DDR3, 64-bit mode, only MMDC0 is initiated */ +DATA 4 0x021b0004 0x0002002d +DATA 4 0x021b0008 0x00333040 +DATA 4 0x021b000c 0x676b52f2 +DATA 4 0x021b0010 0x926e8b63 +DATA 4 0x021b0014 0x01ff00db +DATA 4 0x021b0018 0x00011740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x006b1023 +DATA 4 0x021b0040 0x0000005f +DATA 4 0x021b0000 0x84190000 + +/* Initialize MT41K256M16HA-125 - MR2 */ +DATA 4 0x021b001c 0x02008032 +/* MR3 */ +DATA 4 0x021b001c 0x00008033 +/* MR1 */ +DATA 4 0x021b001c 0x00048031 +/* MR0 */ +DATA 4 0x021b001c 0x15108030 +/* DDR device ZQ calibration */ +DATA 4 0x021b001c 0x04008040 + +/* Final DDR setup, before operation start */ +DATA 4 0x021b0020 0x00007800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b001c 0x00000000 diff --git a/board/samtec/vining_2000/vining_2000.c b/board/samtec/vining_2000/vining_2000.c new file mode 100644 index 0000000000..c92f37c9bb --- /dev/null +++ b/board/samtec/vining_2000/vining_2000.c @@ -0,0 +1,517 @@ +/* + * Copyright (C) 2016 samtec automotive software & electronics gmbh + * + * Author: Christoph Fritz + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PKE | \ + PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_48ohm | \ + PAD_CTL_SRE_FAST) + +#define ENET_CLK_PAD_CTRL PAD_CTL_DSE_34ohm + +#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_PKE | PAD_CTL_ODE | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm) + +#define USDHC_CLK_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST) + +#define USDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST) + +#define GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_PKE) + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_CLK_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_LCD1_VSYNC__GPIO3_IO_28 | MUX_PAD_CTRL(GPIO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_CLK_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const fec1_pads[] = { + MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL) | + MUX_MODE_SION, + /* LAN8720 PHY Reset */ + MX6_PAD_RGMII1_TD3__GPIO5_IO_9 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const pwm_led_pads[] = { + MX6_PAD_RGMII2_RD2__PWM2_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* green */ + MX6_PAD_RGMII2_TD2__PWM6_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* red */ + MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */ +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +#define PHY_RESET IMX_GPIO_NR(5, 9) + +int board_eth_init(bd_t *bis) +{ + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + int ret; + unsigned char eth1addr[6]; + + /* just to get secound mac address */ + imx_get_mac_from_fuse(1, eth1addr); + if (!getenv("eth1addr") && is_valid_ethaddr(eth1addr)) + eth_setenv_enetaddr("eth1addr", eth1addr); + + imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); + + /* + * Generate phy reference clock via pin IOMUX ENET_REF_CLK1/2 by erasing + * ENET1/2_TX_CLK_DIR gpr1[14:13], so that reference clock is driven by + * ref_enetpll0/1 and enable ENET1/2_TX_CLK output driver. + */ + clrsetbits_le32(&iomuxc_regs->gpr[1], + IOMUX_GPR1_FEC1_CLOCK_MUX2_SEL_MASK | + IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK, + IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK | + IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK); + + ret = enable_fec_anatop_clock(0, ENET_50MHZ); + if (ret) + goto eth_fail; + + /* reset phy */ + gpio_direction_output(PHY_RESET, 0); + mdelay(16); + gpio_set_value(PHY_RESET, 1); + mdelay(1); + + ret = fecmxc_initialize_multi(bis, 0, CONFIG_FEC_MXC_PHYADDR, + IMX_FEC_BASE); + if (ret) + goto eth_fail; + + return ret; + +eth_fail: + printf("FEC MXC: %s:failed (%i)\n", __func__, ret); + gpio_set_value(PHY_RESET, 0); + return ret; +} + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +/* I2C1 for PMIC */ +static struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, + .gp = IMX_GPIO_NR(1, 0), + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC, + .gp = IMX_GPIO_NR(1, 1), + }, +}; + +static struct pmic *pfuze_init(unsigned char i2cbus) +{ + struct pmic *p; + int ret; + u32 reg; + + ret = power_pfuze100_init(i2cbus); + if (ret) + return NULL; + + p = pmic_get("PFUZE100"); + ret = pmic_probe(p); + if (ret) + return NULL; + + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + /* Set SW1AB stanby volage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); + + /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PFUZE100_SW1ABCONF, ®); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(p, PFUZE100_SW1ABCONF, reg); + + /* Set SW1C standby voltage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(p, PFUZE100_SW1CSTBY, reg); + + /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PFUZE100_SW1CCONF, ®); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(p, PFUZE100_SW1CCONF, reg); + + return p; +} + +static int pfuze_mode_init(struct pmic *p, u32 mode) +{ + unsigned char offset, i, switch_num; + u32 id; + int ret; + + pmic_reg_read(p, PFUZE100_DEVICEID, &id); + id = id & 0xf; + + if (id == 0) { + switch_num = 6; + offset = PFUZE100_SW1CMODE; + } else if (id == 1) { + switch_num = 4; + offset = PFUZE100_SW2MODE; + } else { + printf("Not supported, id=%d\n", id); + return -EINVAL; + } + + ret = pmic_reg_write(p, PFUZE100_SW1ABMODE, mode); + if (ret < 0) { + printf("Set SW1AB mode error!\n"); + return ret; + } + + for (i = 0; i < switch_num - 1; i++) { + ret = pmic_reg_write(p, offset + i * SWITCH_SIZE, mode); + if (ret < 0) { + printf("Set switch 0x%x mode error!\n", + offset + i * SWITCH_SIZE); + return ret; + } + } + + return ret; +} + +int power_init_board(void) +{ + struct pmic *p; + int ret; + + p = pfuze_init(I2C_PMIC); + if (!p) + return -ENODEV; + + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + + return 0; +} + +#ifdef CONFIG_USB_EHCI_MX6 +static iomux_v3_cfg_t const usb_otg_pads[] = { + /* OGT1 */ + MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), + /* OTG2 */ + MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) +}; + +static void setup_iomux_usb(void) +{ + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); +} + +int board_usb_phy_mode(int port) +{ + if (port == 1) + return USB_INIT_HOST; + else + return usb_phy_mode(port); +} +#endif + +#ifdef CONFIG_PWM_IMX +static int set_pwm_leds(void) +{ + int ret; + + imx_iomux_v3_setup_multiple_pads(pwm_led_pads, + ARRAY_SIZE(pwm_led_pads)); + /* enable backlight PWM 2, green LED */ + ret = pwm_init(1, 0, 0); + if (ret) + goto error; + /* duty cycle 200ns, period: 8000ns */ + ret = pwm_config(1, 200, 8000); + if (ret) + goto error; + ret = pwm_enable(1); + if (ret) + goto error; + + /* enable backlight PWM 1, blue LED */ + ret = pwm_init(0, 0, 0); + if (ret) + goto error; + /* duty cycle 200ns, period: 8000ns */ + ret = pwm_config(0, 200, 8000); + if (ret) + goto error; + ret = pwm_enable(0); + if (ret) + goto error; + + /* enable backlight PWM 6, red LED */ + ret = pwm_init(5, 0, 0); + if (ret) + goto error; + /* duty cycle 200ns, period: 8000ns */ + ret = pwm_config(5, 200, 8000); + if (ret) + goto error; + ret = pwm_enable(5); + +error: + return ret; +} +#else +static int set_pwm_leds(void) +{ + return 0; +} +#endif + +#define ADCx_HC0 0x00 +#define ADCx_HS 0x08 +#define ADCx_HS_C0 BIT(0) +#define ADCx_R0 0x0c +#define ADCx_CFG 0x14 +#define ADCx_CFG_SWMODE 0x308 +#define ADCx_GC 0x18 +#define ADCx_GC_CAL BIT(7) + +static int read_adc(u32 *val) +{ + int ret; + void __iomem *b = map_physmem(ADC1_BASE_ADDR, 0x100, MAP_NOCACHE); + + /* use software mode */ + writel(ADCx_CFG_SWMODE, b + ADCx_CFG); + + /* start auto calibration */ + setbits_le32(b + ADCx_GC, ADCx_GC_CAL); + ret = wait_for_bit("ADC", b + ADCx_GC, ADCx_GC_CAL, ADCx_GC_CAL, 10, 0); + if (ret) + goto adc_exit; + + /* start conversion */ + writel(0, b + ADCx_HC0); + + /* wait for conversion */ + ret = wait_for_bit("ADC", b + ADCx_HS, ADCx_HS_C0, ADCx_HS_C0, 10, 0); + if (ret) + goto adc_exit; + + /* read result */ + *val = readl(b + ADCx_R0); + +adc_exit: + if (ret) + printf("ADC failure (ret=%i)\n", ret); + unmap_physmem(b, MAP_NOCACHE); + return ret; +} + +#define VAL_UPPER 2498 +#define VAL_LOWER 1550 + +static int set_pin_state(void) +{ + u32 val; + int ret; + + ret = read_adc(&val); + if (ret) + return ret; + + if (val >= VAL_UPPER) + setenv("pin_state", "connected"); + else if (val < VAL_UPPER && val > VAL_LOWER) + setenv("pin_state", "open"); + else + setenv("pin_state", "button"); + + return ret; +} + +int board_late_init(void) +{ + int ret; + + ret = set_pwm_leds(); + if (ret) + return ret; + + ret = set_pin_state(); + + return ret; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + setup_iomux_usb(); + + return 0; +} + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC4_BASE_ADDR, 0, 8}, + {USDHC2_BASE_ADDR, 0, 4}, +}; + +#define USDHC2_CD_GPIO IMX_GPIO_NR(3, 28) + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + if (cfg->esdhc_base == USDHC4_BASE_ADDR) + return 1; + if (cfg->esdhc_base == USDHC2_BASE_ADDR) + return !gpio_get_value(USDHC2_CD_GPIO); + + return -EINVAL; +} + +int board_mmc_init(bd_t *bis) +{ + int ret; + + /* + * According to the board_mmc_init() the following map is done: + * (U-Boot device node) (Physical Port) + * mmc0 USDHC4 + * mmc1 USDHC2 + */ + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + gpio_direction_input(USDHC2_CD_GPIO); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + if (ret) { + printf("Warning: failed to initialize USDHC4\n"); + return ret; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[1]); + if (ret) { + printf("Warning: failed to initialize USDHC2\n"); + return ret; + } + + return 0; +} + +int board_init(void) +{ + /* Address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_SYS_I2C_MXC + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: VIN|ING 2000\n"); + + return 0; +} diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig new file mode 100644 index 0000000000..b1f64f1c0f --- /dev/null +++ b/configs/vining_2000_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_SAMTEC_VINING_2000=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/samtec/vining_2000/imximage.cfg" +CONFIG_BOOTDELAY=0 +CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PCI=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_OF_LIBFDT=y +CONFIG_MXC_USB_OTG_HACTIVE=y diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h new file mode 100644 index 0000000000..235574d55d --- /dev/null +++ b/include/configs/vining_2000.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2016 samtec automotive software & electronics gmbh + * + * Configuration settings for the Samtec VIN|ING 2000 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" + +#ifdef CONFIG_SPL +#include "imx6_spl.h" +#endif + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) + +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* MMC Configuration */ +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR + +/* I2C Configs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_SPEED 100000 + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + +/* Network */ +#define CONFIG_FEC_MXC +#define CONFIG_MII + +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x0 + +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + +#define CONFIG_CMD_PCI +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) +#endif + +#define CONFIG_IMX_THERMAL + +#define CONFIG_PWM_IMX +#define CONFIG_IMX6_PWM_PER_CLK 66000000 +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ENV_OFFSET (8 * SZ_64K) +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET_REDUND (9 * SZ_64K) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_IS_IN_MMC + +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_SUPPORT_EMMC_BOOT +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_EMMC_RPMB +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC4 eMMC */ +/* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ +#define CONFIG_SYS_MMC_ENV_PART 1 /* boot0 */ +#endif + +#endif /* __CONFIG_H */