leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge tag 'v2021.01-rc5' into next

Browse Source 
Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
2021-01-05 16:20:26 -05:00
parent c86b18074c 62b07b5173
commit 720620e691
445 changed files with 8260 additions and 4561 deletions
Download Patch File Download Diff File Expand all files Collapse all files

149
include/configs/apalis-imx8x.h Normal file
View File

@@ -0,0 +1,149 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2020 Toradex
*/
#ifndef __APALIS_IMX8X_H
#define __APALIS_IMX8X_H
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include <linux/stringify.h>
#define CONFIG_REMAKE_ELF
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define USDHC1_BASE_ADDR 0x5b010000
#define USDHC2_BASE_ADDR 0x5b020000
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_TFTP_TSIZE
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
#define FEC_ENET_ENABLE_TXC_DELAY
#define FEC_ENET_ENABLE_RXC_DELAY
#define MEM_LAYOUT_ENV_SETTINGS \
"kernel_addr_r=0x80280000\0" \
"fdt_addr_r=0x83100000\0" \
"ramdisk_addr_r=0x8a000000\0" \
"scriptaddr=0x83200000\0"
#ifdef CONFIG_AHAB_BOOT
#define AHAB_ENV "sec_boot=yes\0"
#else
#define AHAB_ENV "sec_boot=no\0"
#endif
/* Boot M4 */
#define M4_BOOT_ENV \
"m4_0_image=m4_0.bin\0" \
"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${m4_0_image}\0" \
"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
#define MFG_NAND_PARTITION ""
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""
#define CONFIG_MFG_ENV_SETTINGS \
"mfgtool_args=setenv bootargs ${consoleargs} " \
"rdinit=/linuxrc g_mass_storage.stall=0 " \
"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
"g_mass_storage.idProduct=0x37FF " \
"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
"${vidargs} clk_ignore_unused\0" \
"initrd_addr=0x83800000\0" \
"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
"${fdt_addr};\0" \
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
AHAB_ENV \
BOOTENV \
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \
"consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
"fdt_file=imx8qxp-apalis-eval.dtb\0" \
"fdtfile=imx8qxp-apalis-eval.dtb\0" \
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
"image=Image\0" \
"initrd_addr=0x83800000\0" \
"mmcargs=setenv bootargs ${consoleargs} " \
"root=PARTUUID=${uuid} rootwait " \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"netargs=setenv bootargs ${consoleargs} " \
"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
"${vidargs}\0" \
"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
"apalis-imx8x/${fdt_file}; booti ${loadaddr} - " \
"${fdt_addr}\0" \
"panel=NULL\0" \
"script=boot.scr\0" \
"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
"${blkcnt}; fi\0" \
"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
/* Link Definitions */
#define CONFIG_LOADADDR 0x89000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
/* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_2 0x880000000
#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
/* Monitor Command Prompt */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CBSIZE SZ_2K
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
/* Networking */
#define CONFIG_FEC_ENET_DEV 0
#define IMX_FEC_BASE 0x5b040000
#define CONFIG_FEC_MXC_PHYADDR 0x4
#define CONFIG_ETHPRIME "eth0"
#define CONFIG_FEC_XCV_TYPE RGMII
#define FEC_QUIRK_ENET_MAC
#define PHY_ANEG_TIMEOUT 20000
#endif /* __APALIS_IMX8X_H */

9
include/configs/apalis_t30.h
View File

@@ -12,7 +12,14 @@
#include "tegra30-common.h"
/* Board-specific serial config */
/*
* Board-specific serial config
*
* Apalis UART1: NVIDIA UARTA
* Apalis UART2: NVIDIA UARTD
* Apalis UART3: NVIDIA UARTB
* Apalis UART4: NVIDIA UARTC
*/
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE

336
include/configs/aristainetos2.h
View File

@@ -13,14 +13,18 @@
#define CONFIG_HOSTNAME "aristainetos2"
#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONSOLE_DEV "ttymxc1"
#elif (CONFIG_SYS_BOARD_VERSION == 6)
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONSOLE_DEV "ttymxc0"
#endif
#define CONFIG_FEC_XCV_TYPE RGMII
/* Framebuffer */
#define CONFIG_SYS_LDB_CLOCK 28341000
#define CONFIG_LG4573
#include "mx6_common.h"
@@ -77,6 +81,8 @@
"enable_hab_check=1\0"
#else
#define HAB_EXTRA_SETTINGS \
"hab_check_addr=echo HAB check addr always returns " \
"true;true\0" \
"hab_check_file_fit=echo HAB check FIT file always returns " \
"true;true\0" \
"hab_check_flash_fit=echo HAB check flash FIT always returns " \
@@ -86,96 +92,18 @@
"enable_hab_check=0\0"
#endif
#if (CONFIG_SYS_BOARD_VERSION == 3)
#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"dead=led led_red on\0" \
"mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
"mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
"-(ubi-nor);gpmi-nand:-(ubi)\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
"bootmode=${bootmode} mmcpart=${mmcpart}\0" \
"mainboot=echo Booting from SD-card ...; " \
"run mainargs addmtd addmisc;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mainargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
"rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
"${fit_addr_r} ${rescue_fit_file}\0"
#elif (CONFIG_SYS_BOARD_VERSION == 4)
"dead=while true; do; " \
"led led_red on; sleep 1;" \
"led led_red off; sleep 1;" \
"done\0"
#elif (CONFIG_SYS_BOARD_VERSION == 6)
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"dead=led led_red on;led led_red2 on;\0" \
"mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
"mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
"-(ubi-nor);gpmi-nand:-(ubi)\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
"bootmode=${bootmode} mmcpart=${mmcpart}\0" \
"mainboot=echo Booting from SD-card ...; " \
"run mainargs addmtd addmisc;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mainargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
"rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
"${fit_addr_r} ${rescue_fit_file}\0"
#elif (CONFIG_SYS_BOARD_VERSION == 5)
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"emmcpart=1\0" \
"emmc_rescue_part=3\0" \
"emmcdev=1\0" \
"emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
"dead=led led_red on\0" \
"mtdids=nor0=spi0.0\0" \
"mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
"-(ubi-nor)\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
"bootmode=${bootmode} mmcpart=${mmcpart} " \
"emmcpart=${emmcpart}\0" \
"mainboot=echo Booting from eMMC ...; " \
"run mainargs addmtd addmisc;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mainargs=setenv bootargs console=${console},${baudrate} " \
"root=${emmcroot} rootfstype=ext4\0 " \
"main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
"${fit_file}; " \
"imi ${fit_addr_r}\0 " \
"rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \
"${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0"
#else
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"dead=led led_red on\0" \
"mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
"mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
"-(ubi-nor);gpmi-nand:-(ubi)\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
"bootmode=${bootmode} mmcpart=${mmcpart}\0" \
"mainboot=echo Booting from SD-card ...; " \
"run mainargs addmtd addmisc;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mainargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
"rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
"${fit_addr_r} ${rescue_fit_file}\0"
"dead=while true; do; " \
"led led_red on; led led_red2 on; sleep 1;" \
"led led_red off; led led_red2 off;; sleep 1;" \
"done\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -183,17 +111,24 @@
"usb_pgood_delay=2000\0" \
"nor_bootdelay=-2\0" \
"script=u-boot.scr\0" \
"fit_file=/boot/system.itb\0" \
"rescue_fit_file=/boot/rescue.itb\0" \
"loadaddr=0x12000000\0" \
"fit_addr_r=0x14000000\0" \
"uboot=/boot/u-boot.imx\0" \
"uboot_sz=d0000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
"console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
"mtdids=nor0=spi0.0\0" \
"mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
"-(ubi-nor)\0" \
"mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
"mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
"mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
"mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
"mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
"bootmode=${bootmode} rng_core.default_quality=1000 " \
"mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
"get_env=mw ${loadaddr} 0 0x20000;" \
@@ -205,7 +140,7 @@
"sf protect unlock 0 0x1000000;" \
"mw ${loadaddr} 0 0x20000;" \
"env export -t ${loadaddr} serial# ethaddr " \
"board_type panel addmisc addmiscM addmiscC addmiscD;" \
"board_type panel;" \
"env default -a;" \
"env import -t ${loadaddr}\0" \
"loadbootscript=" \
@@ -216,28 +151,62 @@
"loadbootscriptUSBf=" \
"fatload usb 0 ${loadaddr} ${script};\0" \
"bootscriptUSB=echo Running bootscript from usb-stick ...; " \
"source\0" \
"source \0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"source \0" \
"mmcpart=1\0" \
"mmcrescuepart=3\0" \
"mmcdev=0\0" \
"emmcpart=1\0" \
"emmcdev=1\0" \
"sysnum=1\0" \
"rescue_sysnum=0\0" \
"rreason=18\0" \
"mainboot=echo Booting from eMMC ...; " \
"run mainargs addmtd addmisc;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mainargs=setenv bootargs console=${console},${baudrate} " \
"root=${emmcroot} rootfstype=ext4\0 " \
"main_load_fit=run mk_fitfile_path; " \
"ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
"${fit_file}; " \
"imi ${fit_addr_r}\0 " \
"rescue_load_fit=run mk_rescue_fitfile_path; " \
"ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
"${rescue_fit_file}; " \
"imi ${fit_addr_r}\0" \
"main_load_pubkey=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
"${pubkey}\0" \
"rescue_load_pubkey=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
"${pubkey}\0" \
"mainRargs=setenv bootargs console=${console},${baudrate} " \
"rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"mmcRargs=setenv bootargs console=${console},${baudrate} " \
"rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs addmtd addmisc;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"mmc_load_fit=run mk_fitfile_path; " \
"ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
"mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${uboot}\0" \
"mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
"imi ${fit_addr_r}\0" \
"mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
"ext4load mmc ${mmcdev}:${mmcpart} " \
"${fit_addr_r} ${rescue_fit_file}\0" \
"imi ${fit_addr_r}\0" \
"mmc_load_uboot=run mk_uboot_path; " \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${uboot}\0" \
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
@@ -246,14 +215,19 @@
"sf write ${loadaddr} 400 ${filesize};" \
"sf read ${cmp_buf} 400 ${uboot_sz};" \
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
"rescueargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/ram rw\0 " \
"mmc_load_pubkey=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${pubkey}\0" \
"mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${pubkey}\0" \
"rescueboot=echo Booting rescue system ...; " \
"run rescueargs addmtd addmisc;" \
"run addmtd addmisc;" \
"if test -n ${rescue_reason}; then run rescue_reason;fi;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"if bootm ${fit_addr_r}; then ; " \
"else " \
@@ -261,50 +235,73 @@
"fi; \0" \
"r_reason_syserr=setenv rescue_reason setenv bootargs " \
"\\\\${bootargs} " \
"rescueReason=18\0 " \
"usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
"usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
"usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
"rescueReason=$rreason\0 " \
"usb_load_fit=run mk_fitfile_path; " \
"ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
"usb_load_fitf=run mk_fitfile_path; " \
"fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
"usb_load_rescuefit=run mk_rescue_fitfile_path; " \
"ext4load usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
"usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
"usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
"fatload usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
"usb_load_pubkey=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load usb 0 ${loadaddr} ${pubkey}\0" \
"usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"ext4load usb 0 ${loadaddr} ${pubkey}\0" \
"usb_load_pubkeyf=run mk_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"fatload usb 0 ${loadaddr} ${pubkey}\0" \
"usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
"setenv hab_check_filetype \"PCR.pem\";" \
"env set check_addr ${loadaddr};" \
"fatload usb 0 ${loadaddr} ${pubkey}\0" \
"usbroot=/dev/sda1 rootwait rw\0" \
"usbboot=echo Booting from usb-stick ...; " \
"run usbargs addmtd addmisc;" \
"if test -n ${addmiscM}; then run addmiscM;fi;" \
"if test -n ${addmiscC}; then run addmiscC;fi;" \
"if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"usbargs=setenv bootargs console=${console},${baudrate} " \
"root=${usbroot}\0" \
"usbRargs=setenv bootargs console=${console},${baudrate} " \
"rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
"mmc_rescue_boot=" \
"run r_reason_syserr;" \
"if run mmc_rescue_load_fit hab_check_file_fit; then " \
"run rescueboot; " \
"if run mmc_rescue_load_pubkey hab_check_addr " \
"mmc_rescue_load_fit hab_check_file_fit; then " \
"run mmcRargs; run rescueboot; " \
"else " \
"run dead; " \
"echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
"run dead; " \
"fi;\0" \
"main_rescue_boot=" \
"if run main_load_fit hab_check_flash_fit; then " \
"if run main_load_pubkey hab_check_addr " \
"main_load_fit hab_check_flash_fit; then " \
"if run mainboot; then ; " \
"else " \
"run r_reason_syserr;" \
"if run rescue_load_fit hab_check_file_fit;" \
"then run rescueboot; " \
"if run rescue_load_pubkey hab_check_addr " \
"rescue_load_fit hab_check_file_fit; then " \
"run mainRargs; run rescueboot; " \
"else " \
"run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
"run dead; " \
"fi; " \
"fi; " \
"else " \
"run r_reason_syserr;" \
"if run rescue_load_fit hab_check_file_fit; then " \
"run rescueboot; " \
"if run rescue_load_pubkey hab_check_addr " \
"rescue_load_fit hab_check_file_fit; then " \
"run mainRargs; run rescueboot; " \
"else " \
"run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
"run dead; " \
"fi; " \
"fi;\0" \
"usb_mmc_rescue_boot=" \
@@ -318,17 +315,21 @@
"hab_check_file_bootscript;" \
"then run bootscriptUSB; " \
"fi; " \
"if run usb_load_fit hab_check_file_fit; then " \
"if run usb_load_pubkey hab_check_addr " \
"usb_load_fit hab_check_file_fit; then " \
"run usbboot; " \
"fi; " \
"if run usb_load_fitf hab_check_file_fit; then " \
"if run usb_load_pubkeyf hab_check_addr " \
"usb_load_fitf hab_check_file_fit; then " \
"run usbboot; " \
"fi; "\
"if run usb_load_rescuefit hab_check_file_fit;" \
"then run r_reason_syserr rescueboot;" \
"if run usb_rescue_load_pubkey hab_check_addr " \
"usb_load_rescuefit hab_check_file_fit; then " \
"run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
"if run usb_load_rescuefitf hab_check_file_fit;" \
"then run r_reason_syserr rescueboot;" \
"if run usb_rescue_load_pubkeyf hab_check_addr " \
"usb_load_rescuefitf hab_check_file_fit; then " \
"run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
"run mmc_rescue_boot;" \
"fi; "\
@@ -338,48 +339,57 @@
"if test ${bootmode} -ne 0 ; then " \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
"if run mmc_rescue_load_fit " \
"hab_check_file_fit; then " \
"run rescueboot; " \
"if run mmc_rescue_load_pubkey " \
"hab_check_addr " \
"mmc_rescue_load_fit " \
"hab_check_file_fit; then " \
"run mmcRargs; run rescueboot; " \
"else " \
"usb start;" \
"if usb storage; then " \
"if run usb_load_rescuefit " \
"hab_check_file_fit;"\
"then " \
"run rescueboot;" \
"if run usb_rescue_load_pubkey " \
"hab_check_addr " \
"usb_load_rescuefit " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"if run usb_load_rescuefitf "\
"hab_check_file_fit;"\
"then " \
"run rescueboot;" \
"if run usb_rescue_load_pubkeyf " \
"hab_check_addr " \
"usb_load_rescuefitf " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
"fi;" \
"run dead; " \
"echo RESCUE SYSTEM ON SD OR " \
"USB BOOT FAILURE;" \
"run dead; " \
"else " \
"usb start;" \
"if usb storage; then " \
"if run usb_load_rescuefit " \
"hab_check_file_fit; then " \
"run rescueboot;" \
"if run usb_rescue_load_pubkey " \
"hab_check_addr " \
"usb_load_rescuefit " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"if run usb_load_rescuefitf " \
"hab_check_file_fit; then " \
"run rescueboot;" \
"if run usb_rescue_load_pubkeyf " \
"hab_check_addr " \
"usb_load_rescuefitf " \
"hab_check_file_fit; then " \
"run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
"run dead; " \
"echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
"run dead; " \
"fi; " \
"else "\
"if run rescue_load_fit hab_check_file_fit; then " \
"run rescueboot; " \
"if run rescue_load_pubkey hab_check_addr " \
"rescue_load_fit hab_check_file_fit; then " \
"run mainRargs; run rescueboot; " \
"else " \
"run dead; " \
"echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
"run dead; " \
"fi; " \
"fi;\0" \
"ari_boot=if test ${bootmode} -ne 0 ; then " \
@@ -388,7 +398,8 @@
"if run loadbootscript hab_check_file_bootscript;" \
"then run bootscript; " \
"fi; " \
"if run mmc_load_fit hab_check_file_fit; then " \
"if run mmc_load_pubkey hab_check_addr " \
"mmc_load_fit hab_check_file_fit; then " \
"if run mmcboot; then ; " \
"else " \
"run mmc_rescue_boot;" \
@@ -421,12 +432,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 2
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
/* USB Configs */
@@ -444,4 +449,7 @@
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
"sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
#endif /* __ARISTAINETOS2_CONFIG_H */

2
include/configs/cei-tk1-som.h
View File

@@ -28,8 +28,6 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_PSCI_NR_CPUS 4
/* Reserve top 1M for secure RAM */
#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000

1
include/configs/cgtqmx6eval.h
View File

@@ -35,7 +35,6 @@
#define CONFIG_SPI_FLASH_SST
/* Thermal support */
#define CONFIG_IMX_THERMAL
/* I2C Configs */
#define CONFIG_SYS_I2C

11
include/configs/chromebook_coral.h
View File

@@ -15,10 +15,13 @@
"read mmc 2:2 100000 0 80; setexpr loader *001004f0; " \
"setexpr size *00100518; setexpr blocks $size / 200; " \
"read mmc 2:2 100000 80 $blocks; setexpr setup $loader - 1000; " \
"setexpr cmdline $loader - 2000; " \
"part uuid mmc 2:2 uuid; setenv bootargs_U $uuid; " \
"zboot start 100000 0 0 0 $setup $cmdline; " \
"zboot load; zboot setup; zboot dump; zboot go"
"setexpr cmdline_ptr $loader - 2000; " \
"setexpr.s cmdline *$cmdline_ptr; " \
"setexpr cmdline gsub %U \\\\${uuid}; " \
"if part uuid mmc 2:2 uuid; then " \
"zboot start 100000 0 0 0 $setup cmdline; " \
"zboot load; zboot setup; zboot dump; zboot go;" \
"fi"
#include <configs/x86-common.h>
#include <configs/x86-chromebook.h>

3
include/configs/cl-som-imx7.h
View File

@@ -141,9 +141,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
/* Uncomment to enable iMX thermal driver support */
/*#define CONFIG_IMX_THERMAL*/
/* SPL */
#include "imx7_spl.h"

7
include/configs/cm_fx6.h
View File

@@ -150,13 +150,6 @@
/* APBH DMA is required for NAND support */
#endif
/* SPI Flash Configs */
#if defined(CONFIG_SPL_BUILD)
#undef CONFIG_DM_SPI
#undef CONFIG_DM_SPI_FLASH
#undef CONFIG_SPI_FLASH_MTD
#endif
/* Ethernet */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_PHYADDR 0

2
include/configs/colibri-imx6ull.h
View File

@@ -140,8 +140,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
#define CONFIG_USBD_HS
/* USB Device Firmware Update support */

2
include/configs/colibri_imx7.h
View File

@@ -208,8 +208,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
#define CONFIG_USBD_HS
#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)

8
include/configs/colibri_t30.h
View File

@@ -14,7 +14,13 @@
/* High-level configuration options */
/* Board-specific serial config */
/*
* Board-specific serial config
*
* Colibri UART-A: NVIDIA UARTA
* Colibri UART-B: NVIDIA UARTD
* Colibri UART-C: NVIDIA UARTB
*/
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE

2
include/configs/dart_6ul.h
View File

@@ -84,8 +84,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
#define ENV_MMC \
"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \

6
include/configs/dh_imx6.h
View File

@@ -52,12 +52,6 @@
/* SATA Configs */
#define CONFIG_LBA48
/* SPI Flash Configs */
#if defined(CONFIG_SPL_BUILD)
#undef CONFIG_DM_SPI
#undef CONFIG_DM_SPI_FLASH
#endif
/* UART */
#define CONFIG_MXC_UART_BASE UART1_BASE

2
include/configs/el6x_common.h
View File

@@ -14,8 +14,6 @@
#include "mx6_common.h"
#define CONFIG_IMX_THERMAL
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

2
include/configs/embestmx6boards.h
View File

@@ -17,8 +17,6 @@
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#define CONFIG_IMX_THERMAL
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

1
include/configs/ethernut5.h
View File

@@ -62,7 +62,6 @@
/* JFFS2 */
#ifdef CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_NAND
#endif

12
include/configs/ge_bx50v3.h
View File

@@ -48,7 +48,7 @@
#define CONFIG_LOADADDR 0x12000000
#ifdef CONFIG_NFS_CMD
#ifdef CONFIG_CMD_NFS
#define NETWORKBOOT \
"setnetworkboot=" \
"setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
@@ -56,13 +56,13 @@
"setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
"setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
"setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
"setenv bootargs $bootargs cma=128M bootcause=POR ${videoargs} " \
"setenv bootargs $bootargs cma=128M bootcause=${bootcause} ${videoargs} " \
"setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
"setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
"networkboot=" \
"run setnetworkboot; " \
"nfs ${loadaddr} /srv/nfs/fitImage; " \
"bootm ${loadaddr}#conf@${confidx}\0" \
"bootm ${loadaddr}\0" \
#define CONFIG_NETWORKBOOTCOMMAND \
"run networkboot; " \
@@ -74,7 +74,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
NETWORKBOOT \
"bootcause=POR\0" \
"image=/boot/fitImage\0" \
"dev=mmc\0" \
"devnum=2\0" \
@@ -104,7 +103,6 @@
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
"run hasfirstboot || setenv partnum 0; " \
"if test ${partnum} != 0; then " \
"setenv bootcause REVERT; " \
"run swappartitions loadimage doboot; " \
"fi; " \
"run failbootcmd\0" \
@@ -113,7 +111,7 @@
"doboot=" \
"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
"run setargs; " \
"bootm ${loadaddr}#conf@${confidx}\0" \
"bootm ${loadaddr}\0" \
"tryboot=" \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
"run loadimage || run swappartitions && run loadimage || " \
@@ -130,7 +128,7 @@
#define CONFIG_USBBOOTCOMMAND \
"echo Unsupported; " \
#ifdef CONFIG_NFS_CMD
#ifdef CONFIG_CMD_NFS
#define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
#elif CONFIG_CMD_USB
#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND

10
include/configs/gw_ventana.h
View File

@@ -32,16 +32,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
/* Init Functions */
/* Driver Model */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_DM_THERMAL
#endif
/* Thermal */
#define CONFIG_IMX_THERMAL
/* Serial */
#define CONFIG_MXC_UART_BASE UART2_BASE

3
include/configs/km/keymile-common.h
View File

@@ -32,9 +32,6 @@
*/
#define CONFIG_BOOTP_BOOTFILESIZE
/* UBI Support for all Keymile boards */
#define CONFIG_MTD_CONCAT
#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
"actual_bank=0\0"

2
include/configs/km/km-powerpc.h
View File

@@ -9,8 +9,6 @@
/* Do boardspecific init for all boards */
#define CONFIG_JFFS2_CMDLINE
/* EEprom support 24C08, 24C16, 24C64 */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */

3
include/configs/kmp204x.h
View File

@@ -337,9 +337,6 @@ int get_scl(void);
* additionnal command line configuration.
*/
/* we don't need flash support */
#undef CONFIG_JFFS2_CMDLINE
/*
* For booting Linux, the board info and command line data
* have to be in the first 64 MB of memory, since this is

2
include/configs/kontron_sl28.h
View File

@@ -89,8 +89,8 @@
"ramdisk_addr_r=0x88080000\0"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(NVME, nvme, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, 0) \

2
include/configs/liteboard.h
View File

@@ -141,6 +141,4 @@
#define CONFIG_ETHPRIME "FEC"
#endif
#define CONFIG_IMX_THERMAL
#endif

62
include/configs/ls1012aqds.h
View File

@@ -102,5 +102,67 @@
#define CONFIG_PCI_SCAN_SHOW
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"fdt_addr=0x00f00000\0" \
"kernel_addr=0x01000000\0" \
"kernelheader_addr=0x600000\0" \
"scriptaddr=0x80000000\0" \
"scripthdraddr=0x80080000\0" \
"fdtheader_addr_r=0x80100000\0" \
"kernelheader_addr_r=0x80200000\0" \
"kernel_addr_r=0x96000000\0" \
"fdt_addr_r=0x90000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"kernelheader_size=0x40000\0" \
"console=ttyS0,115200\0" \
BOOTENV \
"boot_scripts=ls1012aqds_boot.scr\0" \
"boot_script_hdr=hdr_ls1012aqds_bs.out\0" \
"scan_dev_for_boot_part=" \
"part list ${devtype} ${devnum} devplist; " \
"env exists devplist || setenv devplist 1; " \
"for distro_bootpart in ${devplist}; do " \
"if fstype ${devtype} " \
"${devnum}:${distro_bootpart} " \
"bootfstype; then " \
"run scan_dev_for_boot; " \
"fi; " \
"done\0" \
"scan_dev_for_boot=" \
"echo Scanning ${devtype} " \
"${devnum}:${distro_bootpart}...; " \
"for prefix in ${boot_prefixes}; do " \
"run scan_dev_for_scripts; " \
"done;" \
"\0" \
"boot_a_script=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${scriptaddr} ${prefix}${script}; " \
"env exists secureboot && load ${devtype} " \
"${devnum}:${distro_bootpart} " \
"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
"env exists secureboot " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
"qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \
"sf probe 0:0 && sf read $load_addr " \
"$kernel_addr $kernel_size; env exists secureboot " \
"&& sf read $kernelheader_addr_r $kernelheader_addr " \
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
"bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_TFABOOT
#undef QSPI_NOR_BOOTCOMMAND
#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
"env exists secureboot && esbc_halt;"
#else
#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
"env exists secureboot && esbc_halt;"
#endif
#include <asm/fsl_secure_boot.h>
#endif /* __LS1012AQDS_H__ */

4
include/configs/ls1043a_common.h
View File

@@ -247,12 +247,12 @@
"kernelheader_start=0x800000\0" \
"fdt_addr_r=0x90000000\0" \
"load_addr=0xa0000000\0" \
"kernelheader_addr=0x60800000\0" \
"kernelheader_addr=0x60600000\0" \
"kernel_size=0x2800000\0" \
"kernelheader_size=0x40000\0" \
"kernel_addr_sd=0x8000\0" \
"kernel_size_sd=0x14000\0" \
"kernelhdr_addr_sd=0x4000\0" \
"kernelhdr_addr_sd=0x3000\0" \
"kernelhdr_size_sd=0x10\0" \
"console=ttyS0,115200\0" \
"boot_os=y\0" \

4
include/configs/lx2160a_common.h
View File

@@ -149,8 +149,10 @@
/* USB */
#ifdef CONFIG_USB
#define CONFIG_HAS_FSL_XHCI_USB
#ifndef CONFIG_TARGET_LX2162AQDS
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
#endif
/* FlexSPI */
#ifdef CONFIG_NXP_FSPI
@@ -230,7 +232,7 @@ unsigned long get_board_ddr_clk(void);
"kernel_size=0x2800000\0" \
"kernel_addr_sd=0x8000\0" \
"kernelhdr_addr_sd=0x3000\0" \
"kernel_size_sd=0x1d000\0" \
"kernel_size_sd=0x14000\0" \
"kernelhdr_size_sd=0x20\0" \
"console=ttyAMA0,38400n8\0" \
BOOTENV \

76
include/configs/lx2160aqds.h
View File

@@ -8,70 +8,14 @@
#include "lx2160a_common.h"
/* Qixis */
#define QIXIS_XMAP_MASK 0x07
#define QIXIS_XMAP_SHIFT 5
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x20
#define QIXIS_LBMAP_QSPI 0x00
#define QIXIS_RCW_SRC_QSPI 0xff
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_LBMAP_MASK 0x0f
#define QIXIS_LBMAP_SD
#define QIXIS_LBMAP_EMMC
#define QIXIS_RCW_SRC_SD 0x08
#define QIXIS_RCW_SRC_EMMC 0x09
#define NON_EXTENDED_DUTCFG
#define QIXIS_SDID_MASK 0x07
#define QIXIS_ESDHC_NO_ADAPTER 0x7
/* SYSCLK */
#define QIXIS_SYSCLK_100 0x0
#define QIXIS_SYSCLK_125 0x1
#define QIXIS_SYSCLK_133 0x2
/* DDRCLK */
#define QIXIS_DDRCLK_100 0x0
#define QIXIS_DDRCLK_125 0x1
#define QIXIS_DDRCLK_133 0x2
#define BRDCFG4_EMI1SEL_MASK 0xF8
#define BRDCFG4_EMI1SEL_SHIFT 3
#define BRDCFG4_EMI2SEL_MASK 0x07
#define BRDCFG4_EMI2SEL_SHIFT 0
/* VID */
#define I2C_MUX_CH_VOL_MONITOR 0xA
/* Voltage monitor on channel 2*/
#define I2C_VOL_MONITOR_ADDR 0x63
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv"
#define CONFIG_VID
/* The lowest and highest voltage allowed*/
#define VDD_MV_MIN 775
#define VDD_MV_MAX 925
/* PM Bus commands code for LTC3882*/
#define PMBUS_CMD_PAGE 0x0
#define PMBUS_CMD_READ_VOUT 0x8B
#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
#define PMBUS_CMD_VOUT_COMMAND 0x21
#define PWM_CHANNEL0 0x0
#define CONFIG_VOL_MONITOR_LTC3882_SET
#define CONFIG_VOL_MONITOR_LTC3882_READ
/* RTC */
#define CONFIG_SYS_RTC_BUS_NUM 0
#define I2C_MUX_CH_RTC 0xB
/*
* MMC
@@ -87,26 +31,6 @@ u8 qixis_esdhc_detect_quirk(void);
#if defined(CONFIG_FSL_MC_ENET)
#define CONFIG_MII
#define CONFIG_ETHPRIME "DPMAC17@rgmii-id"
#define AQ_PHY_ADDR1 0x00
#define AQ_PHY_ADDR2 0x01
#define AQ_PHY_ADDR3 0x02
#define AQ_PHY_ADDR4 0x03
#define CORTINA_NO_FW_UPLOAD
#define CORTINA_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR2 0x1
#define RGMII_PHY_ADDR1 0x01
#define RGMII_PHY_ADDR2 0x02
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
#endif
/* EEPROM */

50
include/configs/lx2160ardb.h
View File

@@ -8,47 +8,9 @@
#include "lx2160a_common.h"
/* Qixis */
#define QIXIS_XMAP_MASK 0x07
#define QIXIS_XMAP_SHIFT 5
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x20
#define QIXIS_LBMAP_QSPI 0x00
#define QIXIS_RCW_SRC_QSPI 0xff
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_LBMAP_MASK 0x0f
#define QIXIS_LBMAP_SD
#define QIXIS_LBMAP_EMMC
#define QIXIS_RCW_SRC_SD 0x08
#define QIXIS_RCW_SRC_EMMC 0x09
#define NON_EXTENDED_DUTCFG
/* VID */
#define I2C_MUX_CH_VOL_MONITOR 0xA
/* Voltage monitor on channel 2*/
#define I2C_VOL_MONITOR_ADDR 0x63
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
#define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv"
#define CONFIG_VID
/* The lowest and highest voltage allowed*/
#define VDD_MV_MIN 775
#define VDD_MV_MAX 855
/* PM Bus commands code for LTC3882*/
#define PMBUS_CMD_PAGE 0x0
#define PMBUS_CMD_READ_VOUT 0x8B
#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
#define PMBUS_CMD_VOUT_COMMAND 0x21
#define PWM_CHANNEL0 0x0
#define CONFIG_VOL_MONITOR_LTC3882_SET
#define CONFIG_VOL_MONITOR_LTC3882_READ
@@ -59,18 +21,6 @@
#if defined(CONFIG_FSL_MC_ENET)
#define CONFIG_MII
#define CONFIG_ETHPRIME "DPMAC1@xgmii"
#define AQR107_PHY_ADDR1 0x04
#define AQR107_PHY_ADDR2 0x05
#define AQR107_IRQ_MASK 0x0C
#define CORTINA_NO_FW_UPLOAD
#define CORTINA_PHY_ADDR1 0x0
#define INPHI_PHY_ADDR1 0x0
#define RGMII_PHY_ADDR1 0x01
#define RGMII_PHY_ADDR2 0x02
#endif
/* EMC2305 */

78
include/configs/lx2162aqds.h Normal file
View File

@@ -0,0 +1,78 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2020 NXP
*/
#ifndef __LX2162_QDS_H
#define __LX2162_QDS_H
#include "lx2160a_common.h"
/* USB */
#undef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
/* Voltage monitor on channel 2*/
#define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv"
#define CONFIG_VID
#define CONFIG_VOL_MONITOR_LTC3882_SET
#define CONFIG_VOL_MONITOR_LTC3882_READ
/* RTC */
#define CONFIG_SYS_RTC_BUS_NUM 0
/*
* MMC
*/
#ifdef CONFIG_MMC
#ifndef __ASSEMBLY__
u8 qixis_esdhc_detect_quirk(void);
#endif
#define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk()
#endif
/* MAC/PHY configuration */
#if defined(CONFIG_FSL_MC_ENET)
#define CONFIG_MII
#define CONFIG_ETHPRIME "DPMAC17@rgmii-id"
#endif
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM 0
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
"boot_scripts=lx2162aqds_boot.scr\0" \
"boot_script_hdr=hdr_lx2162aqds_bs.out\0" \
"BOARD=lx2162aqds\0" \
"xspi_bootcmd=echo Trying load from flexspi..;" \
"sf probe 0:0 && sf read $load_addr " \
"$kernel_start $kernel_size ; env exists secureboot &&" \
"sf read $kernelheader_addr_r $kernelheader_start " \
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
" bootm $load_addr#$BOARD\0" \
"sd_bootcmd=echo Trying load from sd card..;" \
"mmc dev 0; mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0" \
"emmc_bootcmd=echo Trying load from emmc card..;" \
"mmc dev 1; mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
#include <asm/fsl_secure_boot.h>
#endif /* __LX2162_QDS_H */

2
include/configs/mx6cuboxi.h
View File

@@ -13,8 +13,6 @@
#include "imx6_spl.h"
#define CONFIG_IMX_THERMAL
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
/* MMC Configs */

2
include/configs/mx6sabre_common.h
View File

@@ -12,8 +12,6 @@
#include "mx6_common.h"
#define CONFIG_IMX_THERMAL
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

2
include/configs/mx6slevk.h
View File

@@ -132,6 +132,4 @@
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_IMX_THERMAL
#endif /* __CONFIG_H */

2
include/configs/mx6sllevk.h
View File

@@ -123,8 +123,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_IMX_THERMAL
#define CONFIG_IOMUX_LPSR
/* USB Configs */

2
include/configs/mx6sxsabreauto.h
View File

@@ -138,8 +138,6 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
#define CONFIG_IMX_THERMAL
#define CONFIG_SYS_FSL_USDHC_NUM 2
#endif /* __CONFIG_H */

2
include/configs/mx6sxsabresd.h
View File

@@ -170,8 +170,6 @@
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
#define CONFIG_IMX_THERMAL
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS

2
include/configs/mx6ul_14x14_evk.h
View File

@@ -177,8 +177,6 @@
#endif
#endif
#define CONFIG_IMX_THERMAL
#ifndef CONFIG_SPL_BUILD
#if defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS

2
include/configs/mx6ullevk.h
View File

@@ -150,8 +150,6 @@
/* environment organization */
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
#define CONFIG_IMX_THERMAL
#define CONFIG_IOMUX_LPSR
#define CONFIG_SOFT_SPI

2
include/configs/mx7dsabresd.h
View File

@@ -134,8 +134,6 @@
/* USB Configs */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_IMX_THERMAL
#define CONFIG_USBD_HS
#ifdef CONFIG_VIDEO

2
include/configs/mys_6ulx.h
View File

@@ -50,8 +50,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_IMX_THERMAL
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200n8\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \

3
include/configs/ot1200.h
View File

@@ -74,9 +74,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
#endif
/* Thermal support */
#define CONFIG_IMX_THERMAL
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/pcl063.h
View File

@@ -62,8 +62,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_IMX_THERMAL
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200n8\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \

2
include/configs/pcl063_ull.h
View File

@@ -69,8 +69,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_IMX_THERMAL
#define ENV_MMC \
"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \

3
include/configs/pfla02.h
View File

@@ -13,9 +13,6 @@
#include "mx6_common.h"
/* Thermal */
#define CONFIG_IMX_THERMAL
/* Serial */
#define CONFIG_MXC_UART_BASE UART4_BASE
#define CONSOLE_DEV "ttymxc3"

2
include/configs/pico-imx7d.h
View File

@@ -168,6 +168,4 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
#endif

1
include/configs/pm9263.h
View File

@@ -190,7 +190,6 @@
#endif
#define CONFIG_JFFS2_CMDLINE 1
#define CONFIG_JFFS2_NAND 1
#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */

1
include/configs/qemu-riscv.h
View File

@@ -35,6 +35,7 @@
#define BOOT_TARGET_DEVICES(func) \
func(QEMU, qemu, na) \
func(VIRTIO, virtio, 0) \
func(SCSI, scsi, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

3
include/configs/sksimx6.h
View File

@@ -10,9 +10,6 @@
#include "mx6_common.h"
#include "imx6_spl.h"
/* Thermal */
#define CONFIG_IMX_THERMAL
/* Serial */
#define CONFIG_MXC_UART_BASE UART1_BASE

2
include/configs/somlabs_visionsom_6ull.h
View File

@@ -104,6 +104,4 @@
#define CONFIG_ETHPRIME "eth0"
#endif
#define CONFIG_IMX_THERMAL
#endif

2
include/configs/stih410-b2260.h
View File

@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
* Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#ifndef __CONFIG_H

2
include/configs/stm32f429-evaluation.h
View File

@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) STMicroelectronics SA 2017
* Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
* Author(s): Patrice CHOTARD, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#ifndef __CONFIG_H

2
include/configs/stm32f469-discovery.h
View File

@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) STMicroelectronics SA 2017
* Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
* Author(s): Patrice CHOTARD, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#ifndef __CONFIG_H

2
include/configs/stm32h743-disco.h
View File

@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
* Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#ifndef __CONFIG_H

2
include/configs/stm32h743-eval.h
View File

@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
* Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#ifndef __CONFIG_H

1
include/configs/stmark2.h
View File

@@ -49,7 +49,6 @@
#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000
/* spi not partitions */
#define CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
/* Timer */

2
include/configs/tbs2910.h
View File

@@ -16,8 +16,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_IMX_THERMAL
/* Physical Memory Map */
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR

6
include/configs/tegra-common.h
View File

@@ -49,6 +49,12 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#ifdef CONFIG_ARM64
#define FDTFILE "nvidia/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
#else
#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
*/

1
include/configs/tegra114-common.h
View File

@@ -50,6 +50,7 @@
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdtfile=" FDTFILE "\0" \
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83100000\0"

1
include/configs/tegra124-common.h
View File

@@ -52,6 +52,7 @@
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdtfile=" FDTFILE "\0" \
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83100000\0"

6
include/configs/tegra186-common.h
View File

@@ -20,6 +20,12 @@
/* Generic Interrupt Controller */
#define CONFIG_GICV2
#undef FDTFILE
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK \
"if test -z \"${fdtfile}\" -a -n \"${soc}\"; then " \
"setenv efi_fdtfile ${vendor}/${soc}-${board}${boardver}.dtb; " \
"fi; "
/*
* Memory layout for where various images get loaded by boot scripts:
*

1
include/configs/tegra20-common.h
View File

@@ -51,6 +51,7 @@
"scriptaddr=0x10000000\0" \
"pxefile_addr_r=0x10100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdtfile=" FDTFILE "\0" \
"fdt_addr_r=0x03000000\0" \
"ramdisk_addr_r=0x03100000\0"

1
include/configs/tegra210-common.h
View File

@@ -46,6 +46,7 @@
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdtfile=" FDTFILE "\0" \
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83200000\0"

1
include/configs/tegra30-common.h
View File

@@ -47,6 +47,7 @@
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdtfile=" FDTFILE "\0" \
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83100000\0"

4
include/configs/udoo_neo.h
View File

@@ -70,10 +70,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
#define CONFIG_IMX_THERMAL
/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC

2
include/configs/vining_2000.h
View File

@@ -73,8 +73,6 @@
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6)
#endif
#define CONFIG_IMX_THERMAL
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#ifdef CONFIG_ENV_IS_IN_MMC

2
include/configs/warp7.h
View File

@@ -146,8 +146,6 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_IMX_THERMAL
#define CONFIG_USBD_HS
/* USB Device Firmware Update support */

2
include/configs/xpress.h
View File

@@ -63,8 +63,6 @@
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_IMX_THERMAL
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_UBOOT_SECTOR_START 0x2