boards: amlogic: update documentation for Beelink GT-King/Pro
Update the device matrix and add build instructions. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Christian Hewitt
Neil Armstrong
parent
d83316643c
commit
702b8300f0
115
doc/board/amlogic/beelink-gtking.rst
Normal file
115
doc/board/amlogic/beelink-gtking.rst
Normal file
@ -0,0 +1,115 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
U-Boot for Beelink GT-King
|
||||
==========================
|
||||
|
||||
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
|
||||
board with an S922X-H chip.
|
||||
|
||||
- 4GB LPDDR4 RAM
|
||||
- 64GB eMMC storage
|
||||
- 10/100/1000 Base-T Ethernet
|
||||
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
|
||||
- HDMI 2.1 video
|
||||
- S/PDIF optical output
|
||||
- Analogue audio output
|
||||
- 1x USB 2.0 port
|
||||
- 2x USB 3.0 ports
|
||||
- IR receiver
|
||||
- 1x micro SD card slot
|
||||
|
||||
Beelink do not provide public schematics, but have been willing
|
||||
to share them with known distro developers on request.
|
||||
|
||||
U-Boot compilation
|
||||
------------------
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ export CROSS_COMPILE=aarch64-none-elf-
|
||||
$ make beelink-gtking_defconfig
|
||||
$ make
|
||||
|
||||
Image creation
|
||||
--------------
|
||||
|
||||
Amlogic does not provide sources for the firmware and for tools needed
|
||||
to create the bootloader image. Beelink have provided the Amlogic "SDK"
|
||||
in their forums, but the u-boot sources included result in 2GB RAM being
|
||||
detected. The following FIPs were generated with newer private sources
|
||||
and give correct (4GB) RAM detection:
|
||||
|
||||
https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
|
||||
|
||||
NB: Beelink use a common board config for GT-King, GT-King Pro and the
|
||||
GS-King-X model, hence the "beelink-s922x" name.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
|
||||
$ unzip master.zip
|
||||
$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
|
||||
|
||||
Go back to the mainline U-Boot source tree then:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ mkdir fip
|
||||
$ cp $FIPDIR/* fip/
|
||||
$ cp u-boot.bin fip/bl33.bin
|
||||
|
||||
$ sh fip/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
$ sh fip/blx_fix.sh \
|
||||
fip/bl2.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/acs.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
||||
--output fip/bl30_new.bin.g12a.enc \
|
||||
--level v3
|
||||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
--output fip/bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
||||
--output fip/bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
--output fip/bl33.bin.enc \
|
||||
--level v3 --type bl33
|
||||
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
||||
--output fip/bl2.n.bin.sig
|
||||
$ fip/aml_encrypt_g12b --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc \
|
||||
--ddrfw1 fip/ddr4_1d.fw \
|
||||
--ddrfw2 fip/ddr4_2d.fw \
|
||||
--ddrfw3 fip/ddr3_1d.fw \
|
||||
--ddrfw4 fip/piei.fw \
|
||||
--ddrfw5 fip/lpddr4_1d.fw \
|
||||
--ddrfw6 fip/lpddr4_2d.fw \
|
||||
--ddrfw7 fip/diag_lpddr4.fw \
|
||||
--ddrfw8 fip/aml_ddr.fw \
|
||||
--level v3
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ DEV=/dev/your_sd_device
|
||||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
116
doc/board/amlogic/beelink-gtkingpro.rst
Normal file
116
doc/board/amlogic/beelink-gtkingpro.rst
Normal file
@ -0,0 +1,116 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
U-Boot for Beelink GT-King Pro
|
||||
==============================
|
||||
|
||||
The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
|
||||
board with an S922X-H chip.
|
||||
|
||||
- 4GB LPDDR4 RAM
|
||||
- 64GB eMMC storage
|
||||
- 10/100/1000 Base-T Ethernet
|
||||
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
|
||||
- HDMI 2.1 video
|
||||
- Analogue audio output
|
||||
- 1x RS232 port
|
||||
- 2x USB 2.0 port
|
||||
- 2x USB 3.0 ports
|
||||
- IR receiver
|
||||
- 1x SD card slot
|
||||
- 1x Power on/off button
|
||||
|
||||
Beelink do not provide public schematics, but have been willing
|
||||
to share them with known distro developers on request.
|
||||
|
||||
U-Boot compilation
|
||||
------------------
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ export CROSS_COMPILE=aarch64-none-elf-
|
||||
$ make beelink-gtkingpro_defconfig
|
||||
$ make
|
||||
|
||||
Image creation
|
||||
--------------
|
||||
|
||||
Amlogic does not provide sources for the firmware and for tools needed
|
||||
to create the bootloader image. Beelink have provided the Amlogic "SDK"
|
||||
in their forums, but the u-boot sources included result in 2GB RAM being
|
||||
detected. The following FIPs were generated with newer private sources
|
||||
and give correct (4GB) RAM detection:
|
||||
|
||||
https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
|
||||
|
||||
NB: Beelink use a common board config for GT-King, GT-King Pro and the
|
||||
GS-King-X model, hence the "beelink-s922x" name.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
|
||||
$ unzip master.zip
|
||||
$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
|
||||
|
||||
Go back to the mainline U-Boot source tree then:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ mkdir fip
|
||||
$ cp $FIPDIR/* fip/
|
||||
$ cp u-boot.bin fip/bl33.bin
|
||||
|
||||
$ sh fip/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
$ sh fip/blx_fix.sh \
|
||||
fip/bl2.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/acs.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
||||
--output fip/bl30_new.bin.g12a.enc \
|
||||
--level v3
|
||||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
--output fip/bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
||||
--output fip/bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
--output fip/bl33.bin.enc \
|
||||
--level v3 --type bl33
|
||||
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
||||
--output fip/bl2.n.bin.sig
|
||||
$ fip/aml_encrypt_g12b --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc \
|
||||
--ddrfw1 fip/ddr4_1d.fw \
|
||||
--ddrfw2 fip/ddr4_2d.fw \
|
||||
--ddrfw3 fip/ddr3_1d.fw \
|
||||
--ddrfw4 fip/piei.fw \
|
||||
--ddrfw5 fip/lpddr4_1d.fw \
|
||||
--ddrfw6 fip/lpddr4_2d.fw \
|
||||
--ddrfw7 fip/diag_lpddr4.fw \
|
||||
--ddrfw8 fip/aml_ddr.fw \
|
||||
--level v3
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ DEV=/dev/your_sd_device
|
||||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
@ -17,7 +17,7 @@ This matrix concerns the actual source code version.
|
||||
+===============================+===========+=================+==============+============+============+=============+==============+
|
||||
| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
|
||||
| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
|
||||
| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 |
|
||||
| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
|
||||
| | P201 | LibreTech-AC v2 | | | | | |
|
||||
+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
|
||||
| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
|
||||
@ -77,6 +77,8 @@ Board Documentation
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
beelink-gtking
|
||||
beelink-gtkingpro
|
||||
khadas-vim2
|
||||
khadas-vim3l
|
||||
khadas-vim3
|
||||
|
||||
Loading…
Reference in New Issue
Block a user