Merge branch '2022-09-15-TI-platform-updates' into next
- Updated for assorted platforms using various TI SoCs.
This commit is contained in:
Tom Rini
commit
6ec7207ab3
@ -1389,8 +1389,12 @@ F: configs/k2g_hs_evm_defconfig
|
||||
F: configs/k2l_hs_evm_defconfig
|
||||
F: configs/am65x_hs_evm_r5_defconfig
|
||||
F: configs/am65x_hs_evm_a53_defconfig
|
||||
F: configs/j721e_hs_evm_r5_defconfig
|
||||
F: configs/j7200_hs_evm_a72_defconfig
|
||||
F: configs/j7200_hs_evm_r5_defconfig
|
||||
F: configs/j721e_hs_evm_a72_defconfig
|
||||
F: configs/j721e_hs_evm_r5_defconfig
|
||||
F: configs/j721s2_hs_evm_a72_defconfig
|
||||
F: configs/j721s2_hs_evm_r5_defconfig
|
||||
|
||||
TPM DRIVERS
|
||||
M: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
||||
|
||||
@ -388,8 +388,6 @@ dtb-$(CONFIG_AM33XX) += \
|
||||
am335x-boneblack-wireless.dtb \
|
||||
am335x-boneblue.dtb \
|
||||
am335x-brppt1-mmc.dtb \
|
||||
am335x-brppt1-nand.dtb \
|
||||
am335x-brppt1-spi.dtb \
|
||||
am335x-brxre1.dtb \
|
||||
am335x-brsmarc1.dtb \
|
||||
am335x-draco.dtb \
|
||||
|
||||
112
arch/arm/dts/am335x-brppt1-mmc-u-boot.dtsi
Normal file
112
arch/arm/dts/am335x-brppt1-mmc-u-boot.dtsi
Normal file
@ -0,0 +1,112 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2022 B&R Industrial Automation GmbH -
|
||||
* https://www.br-automation.com/
|
||||
*/
|
||||
|
||||
/ {
|
||||
ocp {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
};
|
||||
|
||||
&l4_wkup {
|
||||
u-boot,dm-pre-reloc;
|
||||
segment@200000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
target-module@0
|
||||
{
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
target-module@7000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
target-module@9000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_cm {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&l4_wkup_clkctrl {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&l4_per {
|
||||
u-boot,dm-pre-reloc;
|
||||
segment@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
target-module@4c000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
};
|
||||
|
||||
segment@100000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
target-module@ac000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
target-module@ae000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&prcm {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&gpio0_target {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&prcm_clocks {
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
|
||||
&scm_clocks {
|
||||
compatible = "simple-bus";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
@ -12,25 +12,10 @@
|
||||
model = "BRPPT1 (MMC) Panel";
|
||||
compatible = "ti,am33xx";
|
||||
|
||||
fset: factory-settings {
|
||||
bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
||||
version = <0x0100>;
|
||||
order-no = "6PPT30 (MMC)";
|
||||
hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
||||
serial-no = "0";
|
||||
device-id = <0x0>;
|
||||
parent-id = <0x0>;
|
||||
hw-variant = <0x1>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
ds1bkl0 = &pwmbacklight;
|
||||
ds1bkl1 = &tps_bl;
|
||||
ds1timing = &timing0;
|
||||
ds1ctrl = &lcdc;
|
||||
gpmc = &gpmc;
|
||||
mmc = &mmc2;
|
||||
fset = &fset;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@ -43,110 +28,21 @@
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
panel {
|
||||
status = "disabled";
|
||||
|
||||
compatible = "ti,tilcdc,panel";
|
||||
enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
backlight = <&pwmbacklight>;
|
||||
bkl-pwm = <&pwmbacklight>;
|
||||
bkl-tps = <&tps_bl>;
|
||||
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
ac-bias-intrpt = <0>;
|
||||
dma-burst-sz = <16>;
|
||||
bpp = <32>;
|
||||
fdd = <0x80>;
|
||||
sync-edge = <0>;
|
||||
sync-ctrl = <1>;
|
||||
raster-order = <0>;
|
||||
fifo-th = <0>;
|
||||
};
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: lcd {
|
||||
clock-frequency = <32000000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hfront-porch = <2>;
|
||||
hback-porch = <192>;
|
||||
hsync-len = <1>;
|
||||
vfront-porch = <20>;
|
||||
vback-porch = <2>;
|
||||
vsync-len = <1>;
|
||||
hsync-active = <1>;
|
||||
vsync-active = <1>;
|
||||
pupdelay = <10>;
|
||||
pondelay = <10>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pwm0: omap-pwm@timer5 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer5>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
pwm1: omap-pwm@timer6 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer6>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
beeper: pwm-beep {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&pwm0 0 0 0>;
|
||||
};
|
||||
|
||||
pwmbacklight: pwm-bkl {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000 0>;
|
||||
|
||||
default-brightness-level = <255>;
|
||||
brightness-levels = <0 16 32 64 128 170 202 234 255>;
|
||||
|
||||
power-supply = <&vmmcsd_fixed>;
|
||||
enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { /* console uart */
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 { /* PMIC controller */
|
||||
u-boot,dm-spl;
|
||||
reg = <0x24>;
|
||||
compatible = "ti,tps65217";
|
||||
|
||||
tps_bl: backlight {
|
||||
compatible = "ti,tps65217-bl";
|
||||
isel = <1>; /* 1 - ISET1, 2 ISET2 */
|
||||
fdim = <1000>; /* TPS65217_BL_FDIM_1kHZ */
|
||||
default-brightness = <50>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
@ -158,10 +54,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
@ -217,7 +109,6 @@
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
u-boot,dm-spl;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <0x4>;
|
||||
ti,non-removable;
|
||||
@ -227,7 +118,6 @@
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
u-boot,dm-spl;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <0x8>;
|
||||
ti,non-removable;
|
||||
@ -236,79 +126,22 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&l4_per {
|
||||
|
||||
segment@300000 {
|
||||
|
||||
target-module@e000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
lcdc: lcdc@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,zx-cutoff-ratio = <40>;
|
||||
ti,min_deviation = <60>;
|
||||
ti,max_deviation = <600>;
|
||||
ti,coordinate-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
|
||||
bnr-buttons {
|
||||
Home-Button {};
|
||||
};
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&timer6 { /* used for cpsw end device */
|
||||
status = "okay";
|
||||
ti,no-reset-on-init;
|
||||
@ -320,37 +153,3 @@
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
status = "okay";
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&epwmss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcan0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -1,374 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2018 B&R Industrial Automation GmbH
|
||||
* http://www.br-automation.com
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BRPPT1 (NAND) Panel";
|
||||
compatible = "ti,am33xx";
|
||||
|
||||
fset: factory-settings {
|
||||
bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
||||
version = <0x0100>;
|
||||
order-no = "6PPT30 (NAND)";
|
||||
hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
||||
serial-no = "0";
|
||||
device-id = <0x0>;
|
||||
parent-id = <0x0>;
|
||||
hw-variant = <0x1>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
ds1bkl0 = &pwmbacklight;
|
||||
ds1bkl1 = &tps_bl;
|
||||
ds1timing = &timing0;
|
||||
ds1ctrl = &lcdc;
|
||||
gpmc = &gpmc;
|
||||
mmc = &mmc2;
|
||||
fset = &fset;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyO0,115200 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
panel {
|
||||
status = "disabled";
|
||||
|
||||
compatible = "ti,tilcdc,panel";
|
||||
enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
backlight = <&pwmbacklight>;
|
||||
bkl-pwm = <&pwmbacklight>;
|
||||
bkl-tps = <&tps_bl>;
|
||||
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
ac-bias-intrpt = <0>;
|
||||
dma-burst-sz = <16>;
|
||||
bpp = <32>;
|
||||
fdd = <0x80>;
|
||||
sync-edge = <0>;
|
||||
sync-ctrl = <1>;
|
||||
raster-order = <0>;
|
||||
fifo-th = <0>;
|
||||
};
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: lcd {
|
||||
clock-frequency = <32000000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hfront-porch = <2>;
|
||||
hback-porch = <192>;
|
||||
hsync-len = <1>;
|
||||
vfront-porch = <20>;
|
||||
vback-porch = <2>;
|
||||
vsync-len = <1>;
|
||||
hsync-active = <1>;
|
||||
vsync-active = <1>;
|
||||
pupdelay = <10>;
|
||||
pondelay = <10>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pwm0: omap-pwm@timer5 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer5>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
pwm1: omap-pwm@timer6 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer6>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
beeper: pwm-beep {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&pwm0 0 0 0>;
|
||||
};
|
||||
|
||||
pwmbacklight: pwm-bkl {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000 0>;
|
||||
|
||||
default-brightness-level = <255>;
|
||||
brightness-levels = <0 16 32 64 128 170 202 234 255>;
|
||||
|
||||
power-supply = <&vmmcsd_fixed>;
|
||||
enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { /* console uart */
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 { /* PMIC controller */
|
||||
u-boot,dm-spl;
|
||||
reg = <0x24>;
|
||||
compatible = "ti,tps65217";
|
||||
|
||||
tps_bl: backlight {
|
||||
compatible = "ti,tps65217-bl";
|
||||
isel = <1>; /* 1 - ISET1, 2 ISET2 */
|
||||
fdim = <1000>; /* TPS65217_BL_FDIM_1kHZ */
|
||||
default-brightness = <50>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&mac {
|
||||
dual_emac;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy-handle = <&phy0>;
|
||||
dual_emac_res_vlan = <1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy-handle = <&phy1>;
|
||||
dual_emac_res_vlan = <2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <0x4>;
|
||||
ti,non-removable;
|
||||
ti,needs-special-hs-handling;
|
||||
ti,vcc-aux-disable-is-sleep;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&l4_per {
|
||||
|
||||
segment@300000 {
|
||||
|
||||
target-module@e000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
lcdc: lcdc@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,zx-cutoff-ratio = <40>;
|
||||
ti,min_deviation = <60>;
|
||||
ti,max_deviation = <600>;
|
||||
ti,coordinate-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
|
||||
bnr-buttons {
|
||||
Home-Button {};
|
||||
};
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
interrupt-parent = <&gpmc>;
|
||||
rb-gpios = <&gpmc 1 GPIO_ACTIVE_HIGH>; /* gpmc_wait1 */
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
ti,elm-id = <&elm>;
|
||||
nand-bus-width = <8>;
|
||||
gpmc,device-width = <1>;
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-on-ns = <0>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-on-ns = <0>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,wait-on-read = "true";
|
||||
gpmc,wait-on-write = "true";
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,clk-activation-ns = <0>;
|
||||
gpmc,wait-monitoring-ns = <0>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
gpmc,wait-pin = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
partition@0 {
|
||||
label = "NAND.MLO";
|
||||
reg = <0x00000000 0x000020000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "NAND.cfgscr";
|
||||
reg = <0x00020000 0x00020000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "NAND.dtb";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "NAND.u-boot-env";
|
||||
reg = <0x00060000 0x00020000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "NAND.u-boot";
|
||||
reg = <0x00080000 0x00080000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "NAND.kernel";
|
||||
reg = <0x00100000 0x00400000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "NAND.rootfs";
|
||||
reg = <0x00500000 0x08000000>;
|
||||
};
|
||||
partition@7 {
|
||||
label = "NAND.user";
|
||||
reg = <0x08500000 0x17b00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1,377 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2018 B&R Industrial Automation GmbH
|
||||
* http://www.br-automation.com
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BRPPT1 (MMC) Panel";
|
||||
compatible = "ti,am33xx";
|
||||
|
||||
fset: factory-settings {
|
||||
bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
||||
version = <0x0100>;
|
||||
order-no = "6PPT30 (SPI)";
|
||||
hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
||||
serial-no = "0";
|
||||
device-id = <0x0>;
|
||||
parent-id = <0x0>;
|
||||
hw-variant = <0x1>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
ds1bkl0 = &pwmbacklight;
|
||||
ds1bkl1 = &tps_bl;
|
||||
ds1timing = &timing0;
|
||||
ds1ctrl = &lcdc;
|
||||
gpmc = &gpmc;
|
||||
mmc = &mmc2;
|
||||
spi0 = &spi0;
|
||||
fset = &fset;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyO0,115200 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
panel {
|
||||
status = "disabled";
|
||||
|
||||
compatible = "ti,tilcdc,panel";
|
||||
enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
backlight = <&pwmbacklight>;
|
||||
bkl-pwm = <&pwmbacklight>;
|
||||
bkl-tps = <&tps_bl>;
|
||||
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
ac-bias-intrpt = <0>;
|
||||
dma-burst-sz = <16>;
|
||||
bpp = <32>;
|
||||
fdd = <0x80>;
|
||||
sync-edge = <0>;
|
||||
sync-ctrl = <1>;
|
||||
raster-order = <0>;
|
||||
fifo-th = <0>;
|
||||
};
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: lcd {
|
||||
clock-frequency = <32000000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hfront-porch = <2>;
|
||||
hback-porch = <192>;
|
||||
hsync-len = <1>;
|
||||
vfront-porch = <20>;
|
||||
vback-porch = <2>;
|
||||
vsync-len = <1>;
|
||||
hsync-active = <1>;
|
||||
vsync-active = <1>;
|
||||
pupdelay = <10>;
|
||||
pondelay = <10>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pwm0: omap-pwm@timer5 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer5>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
pwm1: omap-pwm@timer6 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer6>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
beeper: pwm-beep {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&pwm0 0 0 0>;
|
||||
};
|
||||
|
||||
pwmbacklight: pwm-bkl {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000 0>;
|
||||
|
||||
default-brightness-level = <255>;
|
||||
brightness-levels = <0 16 32 64 128 170 202 234 255>;
|
||||
|
||||
power-supply = <&vmmcsd_fixed>;
|
||||
enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { /* console uart */
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 { /* PMIC controller */
|
||||
u-boot,dm-spl;
|
||||
reg = <0x24>;
|
||||
compatible = "ti,tps65217";
|
||||
|
||||
tps_bl: backlight {
|
||||
compatible = "ti,tps65217-bl";
|
||||
isel = <1>; /* 1 - ISET1, 2 ISET2 */
|
||||
fdim = <1000>; /* TPS65217_BL_FDIM_1kHZ */
|
||||
default-brightness = <50>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
u-boot,dm-spl;
|
||||
status = "okay";
|
||||
|
||||
cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 6 GPIO_ACTIVE_HIGH>,
|
||||
<0>,
|
||||
<0>;
|
||||
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
spi_flash: spiflash@0 {
|
||||
u-boot,dm-spl;
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "spidev", "jedec,spi-nor";
|
||||
spi-max-frequency = <24000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&mac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy-handle = <&phy0>;
|
||||
dual_emac_res_vlan = <1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy-handle = <&phy1>;
|
||||
dual_emac_res_vlan = <2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
u-boot,dm-spl;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <0x4>;
|
||||
ti,non-removable;
|
||||
ti,needs-special-hs-handling;
|
||||
ti,vcc-aux-disable-is-sleep;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
u-boot,dm-spl;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <0x8>;
|
||||
ti,non-removable;
|
||||
ti,needs-special-hs-handling;
|
||||
ti,vcc-aux-disable-is-sleep;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&l4_per {
|
||||
|
||||
segment@300000 {
|
||||
|
||||
target-module@e000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
lcdc: lcdc@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
u-boot,dm-spl;
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,zx-cutoff-ratio = <40>;
|
||||
ti,min_deviation = <60>;
|
||||
ti,max_deviation = <600>;
|
||||
ti,coordinate-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
|
||||
bnr-buttons {
|
||||
Home-Button {};
|
||||
};
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&timer6 { /* used for cpsw end device */
|
||||
status = "okay";
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&timer7 { /* used for cpsw end device */
|
||||
status = "okay";
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
status = "okay";
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&epwmss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcan0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -151,9 +151,7 @@ int board_init(void)
|
||||
hw_watchdog_init();
|
||||
#endif
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
gpmc_init();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
@ -26,6 +26,7 @@ static struct module_pin_mux uart0_pin_mux[] = {
|
||||
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
|
||||
{-1},
|
||||
};
|
||||
|
||||
static struct module_pin_mux uart1_pin_mux[] = {
|
||||
/* UART1_RTS as I2C2-SCL */
|
||||
{OFFSET(uart1_rtsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
||||
@ -37,7 +38,7 @@ static struct module_pin_mux uart1_pin_mux[] = {
|
||||
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
|
||||
{-1},
|
||||
};
|
||||
#ifdef CONFIG_MMC
|
||||
|
||||
static struct module_pin_mux mmc1_pin_mux[] = {
|
||||
{OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */
|
||||
{OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT6 */
|
||||
@ -54,7 +55,7 @@ static struct module_pin_mux mmc1_pin_mux[] = {
|
||||
{OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */
|
||||
{-1},
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct module_pin_mux i2c0_pin_mux[] = {
|
||||
/* I2C_DATA */
|
||||
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
|
||||
@ -118,26 +119,7 @@ static struct module_pin_mux mii2_pin_mux[] = {
|
||||
{OFFSET(gpmc_be1n), (MODE(1) | RXACTIVE)},/* MII1_COL */
|
||||
{-1},
|
||||
};
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
static struct module_pin_mux nand_pin_mux[] = {
|
||||
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
|
||||
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
|
||||
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
|
||||
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
|
||||
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
|
||||
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
|
||||
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
|
||||
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
|
||||
{OFFSET(gpmc_clk), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
|
||||
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
|
||||
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
|
||||
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
|
||||
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
|
||||
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
|
||||
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
|
||||
{-1},
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct module_pin_mux gpIOs[] = {
|
||||
/* GPIO0_6 (SPI0_CS1) - 3v3_PWR_nEN (Display Power Supply) */
|
||||
{OFFSET(spi0_cs1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
||||
@ -180,14 +162,6 @@ static struct module_pin_mux gpIOs[] = {
|
||||
{OFFSET(mcasp0_axr0), (MODE(7) | PULLUDDIS) },
|
||||
/* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */
|
||||
{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) },
|
||||
#ifndef CONFIG_MTD_RAW_NAND
|
||||
/* GPIO2_3 - NAND_OE */
|
||||
{OFFSET(gpmc_oen_ren), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
|
||||
/* GPIO2_4 - NAND_WEN */
|
||||
{OFFSET(gpmc_wen), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
|
||||
/* GPIO2_5 - NAND_BE_CLE */
|
||||
{OFFSET(gpmc_be0n_cle), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
|
||||
#endif
|
||||
{-1},
|
||||
};
|
||||
|
||||
@ -222,7 +196,6 @@ static struct module_pin_mux lcd_pin_mux[] = {
|
||||
{OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)}, /* LCD-HSync */
|
||||
{OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
|
||||
{OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)}, /* LCD-CLK */
|
||||
|
||||
{-1},
|
||||
};
|
||||
|
||||
@ -241,11 +214,7 @@ void enable_board_pin_mux(void)
|
||||
configure_module_pin_mux(i2c0_pin_mux);
|
||||
configure_module_pin_mux(mii1_pin_mux);
|
||||
configure_module_pin_mux(mii2_pin_mux);
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
configure_module_pin_mux(nand_pin_mux);
|
||||
#elif defined(CONFIG_MMC)
|
||||
configure_module_pin_mux(mmc1_pin_mux);
|
||||
#endif
|
||||
configure_module_pin_mux(spi0_pin_mux);
|
||||
configure_module_pin_mux(lcd_pin_mux);
|
||||
configure_module_pin_mux(uart1_pin_mux);
|
||||
|
||||
@ -46,7 +46,6 @@ save_boot_params:
|
||||
* (CONFIG_SYS_TEXT_BASE).
|
||||
*/
|
||||
|
||||
copy_kernel_start:
|
||||
/* r0 - start of kernel before */
|
||||
adr r0, kernoffs /* r0 - current address of kernoffs section */
|
||||
ldr r1, kernoffs /* r1 - offset of kernel image from kernoffs section */
|
||||
@ -77,7 +76,7 @@ copy_kernel_start:
|
||||
ldr r4, [r0, #36] /* r4 - 4 bytes header of kernel at offset 36 */
|
||||
ldr r5, z_magic /* r5 - LINUX_ARM_ZIMAGE_MAGIC */
|
||||
cmp r4, r5
|
||||
bne copy_kernel_end /* skip if invalid image */
|
||||
bne skip_copy /* skip if invalid image */
|
||||
|
||||
copy_kernel_loop:
|
||||
ldmdb r1!, {r3 - r10}
|
||||
@ -85,12 +84,12 @@ copy_kernel_loop:
|
||||
cmp r1, r0
|
||||
bhi copy_kernel_loop
|
||||
|
||||
copy_kernel_end:
|
||||
|
||||
/* remove header in source kernel image */
|
||||
mov r5, #0
|
||||
str r5, [r0] /* remove 4 bytes header of kernel uImage */
|
||||
str r5, [r0, #36] /* remove 4 bytes header of kernel zImage */
|
||||
|
||||
skip_copy:
|
||||
|
||||
/* Returns */
|
||||
b save_boot_params_ret
|
||||
|
||||
@ -17,6 +17,8 @@ CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_ENV_OFFSET_REDUND=0x50000
|
||||
CONFIG_SYS_LOAD_ADDR=0x80000000
|
||||
CONFIG_LOCALVERSION="-2.0.0"
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
|
||||
# CONFIG_EXPERT is not set
|
||||
@ -26,7 +28,7 @@ CONFIG_BOOTDELAY=0
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run b_default"
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_PREBOOT="run cfgscr; run brdefaultip"
|
||||
CONFIG_PREBOOT="mw ${cfgaddr} 0; mw ${dtbaddr} 0; run cfgscr; run brdefaultip"
|
||||
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
||||
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
@ -90,7 +92,7 @@ CONFIG_NETCONSOLE=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
# CONFIG_OF_TRANSLATE is not set
|
||||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_BOOTCOUNT_LIMIT=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
||||
|
||||
@ -1,122 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_OMAP2PLUS=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x500000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_ENV_OFFSET=0x60000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
|
||||
CONFIG_AM33XX=y
|
||||
CONFIG_TARGET_BRPPT1=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x80000000
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
|
||||
# CONFIG_EXPERT is not set
|
||||
# CONFIG_FIT is not set
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_BOOTDELAY=0
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run b_default"
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_PREBOOT="run cfgscr; run brdefaultip"
|
||||
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
||||
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_ARCH_MISC_INIT=y
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
|
||||
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_SPL_NAND_DRIVERS=y
|
||||
CONFIG_SPL_NAND_ECC=y
|
||||
CONFIG_SPL_NAND_BASE=y
|
||||
CONFIG_SPL_POWER=y
|
||||
CONFIG_SPL_WATCHDOG=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_MAXARGS=64
|
||||
CONFIG_SYS_CBSIZE=512
|
||||
CONFIG_SYS_PBSIZE=532
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_SYS_BOOTM_LEN=0x2000000
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_XIMG is not set
|
||||
# CONFIG_CMD_EDITENV is not set
|
||||
# CONFIG_CMD_CRC32 is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_NAND=y
|
||||
CONFIG_CMD_PART=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_ITEST is not set
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_BOOTP_MAY_FAIL=y
|
||||
# CONFIG_CMD_NFS is not set
|
||||
CONFIG_SYS_DISABLE_AUTOLOAD=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_BOOTCOUNT=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(MLO),128k(cfgscr),128k(dtb),128k(u-boot-env),512k(u-boot),4m(kernel),128m(rootfs),-(user)"
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_VERSION_VARIABLE=y
|
||||
CONFIG_NET_RETRY_COUNT=10
|
||||
CONFIG_BOOTP_SEND_HOSTNAME=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_NETCONSOLE=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
# CONFIG_OF_TRANSLATE is not set
|
||||
CONFIG_BOOTCOUNT_LIMIT=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
||||
CONFIG_MISC=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
|
||||
CONFIG_SYS_NAND_PAGE_COUNT=0x40
|
||||
CONFIG_SYS_NAND_PAGE_SIZE=0x800
|
||||
CONFIG_SYS_NAND_OOBSIZE=0x40
|
||||
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
||||
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
|
||||
CONFIG_PHY_NATSEMI=y
|
||||
CONFIG_DRIVER_TI_CPSW=y
|
||||
CONFIG_DM_PMIC=y
|
||||
# CONFIG_SPL_DM_PMIC is not set
|
||||
CONFIG_PMIC_TPS65217=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_GADGET=y
|
||||
CONFIG_USB_MUSB_TI=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
CONFIG_LZO=y
|
||||
# CONFIG_OF_LIBFDT_OVERLAY is not set
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
@ -1,130 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_OMAP2PLUS=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x500000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_ENV_OFFSET=0x20000
|
||||
CONFIG_ENV_SECT_SIZE=0x10000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_DM_SPI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-spi"
|
||||
CONFIG_AM33XX=y
|
||||
CONFIG_TARGET_BRPPT1=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_ENV_OFFSET_REDUND=0x30000
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x80000000
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
|
||||
# CONFIG_EXPERT is not set
|
||||
# CONFIG_FIT is not set
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_SPI_BOOT=y
|
||||
CONFIG_BOOTDELAY=0
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run b_default"
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_PREBOOT="run cfgscr; run brdefaultip"
|
||||
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
||||
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_ARCH_MISC_INIT=y
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
|
||||
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
|
||||
CONFIG_SPL_I2C=y
|
||||
# CONFIG_SPL_NAND_SUPPORT is not set
|
||||
CONFIG_SPL_DM_SPI_FLASH=y
|
||||
CONFIG_SPL_POWER=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
|
||||
CONFIG_SPL_WATCHDOG=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_MAXARGS=64
|
||||
CONFIG_SYS_CBSIZE=512
|
||||
CONFIG_SYS_PBSIZE=532
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_SYS_BOOTM_LEN=0x2000000
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_XIMG is not set
|
||||
# CONFIG_CMD_EDITENV is not set
|
||||
# CONFIG_CMD_CRC32 is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_BKOPS_ENABLE=y
|
||||
CONFIG_CMD_PART=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_ITEST is not set
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_BOOTP_MAY_FAIL=y
|
||||
# CONFIG_CMD_NFS is not set
|
||||
CONFIG_SYS_DISABLE_AUTOLOAD=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_BOOTCOUNT=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_VERSION_VARIABLE=y
|
||||
CONFIG_NET_RETRY_COUNT=10
|
||||
CONFIG_BOOTP_SEND_HOSTNAME=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_NETCONSOLE=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
# CONFIG_OF_TRANSLATE is not set
|
||||
CONFIG_BOOTCOUNT_LIMIT=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SF_DEFAULT_SPEED=24000000
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_PHY_NATSEMI=y
|
||||
CONFIG_DRIVER_TI_CPSW=y
|
||||
CONFIG_DM_PMIC=y
|
||||
# CONFIG_SPL_DM_PMIC is not set
|
||||
CONFIG_PMIC_TPS65217=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_OMAP3_SPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_GADGET=y
|
||||
CONFIG_USB_MUSB_TI=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
CONFIG_LZO=y
|
||||
# CONFIG_OF_LIBFDT_OVERLAY is not set
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
208
configs/j7200_hs_evm_a72_defconfig
Normal file
208
configs/j7200_hs_evm_a72_defconfig
Normal file
@ -0,0 +1,208 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_K3=y
|
||||
CONFIG_TI_SECURE_DEVICE=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x2000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=2
|
||||
CONFIG_SOC_K3_J721E=y
|
||||
CONFIG_TARGET_J7200_A72_EVM=y
|
||||
CONFIG_ENV_SIZE=0x20000
|
||||
CONFIG_ENV_OFFSET=0x680000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_DM_SPI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="k3-j7200-common-proc-board"
|
||||
CONFIG_SPL_TEXT_BASE=0x80080000
|
||||
CONFIG_SPL_MMC=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_DRIVERS_MISC=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
||||
CONFIG_ENV_OFFSET_REDUND=0x6A0000
|
||||
CONFIG_SPL_FS_FAT=y
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI=y
|
||||
# CONFIG_PSCI_RESET is not set
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
|
||||
CONFIG_FIT_IMAGE_POST_PROCESS=y
|
||||
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
||||
# CONFIG_USE_SPL_FIT_GENERATOR is not set
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit"
|
||||
CONFIG_LOGLEVEL=7
|
||||
CONFIG_SPL_MAX_SIZE=0xc0000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x80a00000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x80000
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
|
||||
CONFIG_SPL_DMA=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_SPL_DM_MAILBOX=y
|
||||
CONFIG_SPL_MTD_SUPPORT=y
|
||||
CONFIG_SPL_DM_SPI_FLASH=y
|
||||
CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_SPL_DM_RESET=y
|
||||
CONFIG_SPL_POWER_DOMAIN=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
# CONFIG_SPL_SPI_FLASH_TINY is not set
|
||||
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
|
||||
CONFIG_SPL_USB_GADGET=y
|
||||
CONFIG_SPL_DFU=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_SYS_MAXARGS=64
|
||||
CONFIG_CMD_ASKENV=y
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_MTD=y
|
||||
CONFIG_CMD_REMOTEPROC=y
|
||||
CONFIG_CMD_UFS=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs)"
|
||||
CONFIG_CMD_UBI=y
|
||||
# CONFIG_ISO_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_SPL_MULTI_DTB_FIT=y
|
||||
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_CLK_CCF=y
|
||||
CONFIG_CLK_TI_SCI=y
|
||||
CONFIG_DFU_MMC=y
|
||||
CONFIG_DFU_RAM=y
|
||||
CONFIG_DFU_SF=y
|
||||
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
|
||||
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
|
||||
CONFIG_DMA_CHANNELS=y
|
||||
CONFIG_TI_K3_NAVSS_UDMA=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
|
||||
CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_TI_SCI_PROTOCOL=y
|
||||
CONFIG_DA8XX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_I2C_GPIO=y
|
||||
CONFIG_SYS_I2C_OMAP24XX=y
|
||||
CONFIG_DM_MAILBOX=y
|
||||
CONFIG_K3_SEC_PROXY=y
|
||||
CONFIG_SUPPORT_EMMC_BOOT=y
|
||||
CONFIG_MMC_IO_VOLTAGE=y
|
||||
CONFIG_MMC_UHS_SUPPORT=y
|
||||
CONFIG_MMC_HS400_SUPPORT=y
|
||||
CONFIG_SPL_MMC_HS400_SUPPORT=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ADMA=y
|
||||
CONFIG_SPL_MMC_SDHCI_ADMA=y
|
||||
CONFIG_MMC_SDHCI_AM654=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_MTD_NOR_FLASH=y
|
||||
CONFIG_CFI_FLASH=y
|
||||
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
||||
CONFIG_FLASH_CFI_MTD=y
|
||||
CONFIG_SYS_FLASH_CFI=y
|
||||
CONFIG_HBMC_AM654=y
|
||||
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_SPI_FLASH_MTD=y
|
||||
CONFIG_MULTIPLEXER=y
|
||||
CONFIG_MUX_MMIO=y
|
||||
CONFIG_PHY_FIXED=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_TI_AM65_CPSW_NUSS=y
|
||||
CONFIG_PHY=y
|
||||
CONFIG_SPL_PHY=y
|
||||
CONFIG_PHY_CADENCE_TORRENT=y
|
||||
CONFIG_PHY_J721E_WIZ=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_PINCTRL_SINGLE=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_TI_SCI_POWER_DOMAIN=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_RAM=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_REMOTEPROC_TI_K3_R5F=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_RESET_TI_SCI=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SOC_DEVICE=y
|
||||
CONFIG_SOC_DEVICE_TI_K3=y
|
||||
CONFIG_SOC_TI=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_CADENCE_QSPI=y
|
||||
CONFIG_HAS_CQSPI_REF_CLK=y
|
||||
CONFIG_CQSPI_REF_CLK=133333333
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SPL_SYSRESET=y
|
||||
CONFIG_SYSRESET_TI_SCI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB_GADGET=y
|
||||
CONFIG_SPL_DM_USB_GADGET=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_CDNS3=y
|
||||
CONFIG_USB_CDNS3_GADGET=y
|
||||
CONFIG_USB_CDNS3_HOST=y
|
||||
CONFIG_SPL_USB_CDNS3_GADGET=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x6164
|
||||
CONFIG_UFS=y
|
||||
CONFIG_CADENCE_UFS=y
|
||||
CONFIG_TI_J721E_UFS=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
172
configs/j7200_hs_evm_r5_defconfig
Normal file
172
configs/j7200_hs_evm_r5_defconfig
Normal file
@ -0,0 +1,172 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_K3=y
|
||||
CONFIG_TI_SECURE_DEVICE=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x2000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x70000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SOC_K3_J721E=y
|
||||
CONFIG_K3_EARLY_CONS=y
|
||||
CONFIG_TARGET_J7200_R5_EVM=y
|
||||
CONFIG_ENV_SIZE=0x20000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_DM_SPI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="k3-j7200-r5-common-proc-board"
|
||||
CONFIG_SPL_TEXT_BASE=0x41c00000
|
||||
CONFIG_SPL_MMC=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_DRIVERS_MISC=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
||||
CONFIG_SPL_FS_FAT=y
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI=y
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf5bfc
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
|
||||
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
||||
# CONFIG_USE_SPL_FIT_GENERATOR is not set
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_SPL_MAX_SIZE=0xc0000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x41cf5bfc
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0xa000
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_SEPARATE_BSS=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
|
||||
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
|
||||
CONFIG_SPL_EARLY_BSS=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
|
||||
CONFIG_SPL_DMA=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_FS_EXT4=y
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_SPL_DM_MAILBOX=y
|
||||
CONFIG_SPL_MTD_SUPPORT=y
|
||||
CONFIG_SPL_DM_SPI_FLASH=y
|
||||
CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_SPL_DM_RESET=y
|
||||
CONFIG_SPL_POWER_DOMAIN=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
CONFIG_SPL_REMOTEPROC=y
|
||||
# CONFIG_SPL_SPI_FLASH_TINY is not set
|
||||
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
|
||||
CONFIG_SPL_USB_GADGET=y
|
||||
CONFIG_SPL_DFU=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_MAXARGS=64
|
||||
CONFIG_SYS_BOOTM_LEN=0x4000000
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_REMOTEPROC=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_SPL_CLK_CCF=y
|
||||
CONFIG_SPL_CLK_K3_PLL=y
|
||||
CONFIG_SPL_CLK_K3=y
|
||||
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
|
||||
CONFIG_DMA_CHANNELS=y
|
||||
CONFIG_TI_K3_NAVSS_UDMA=y
|
||||
CONFIG_TI_SCI_PROTOCOL=y
|
||||
CONFIG_DA8XX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
||||
CONFIG_SYS_I2C_OMAP24XX=y
|
||||
CONFIG_DM_MAILBOX=y
|
||||
CONFIG_K3_SEC_PROXY=y
|
||||
CONFIG_FS_LOADER=y
|
||||
CONFIG_SPL_FS_LOADER=y
|
||||
CONFIG_K3_AVS0=y
|
||||
CONFIG_SUPPORT_EMMC_BOOT=y
|
||||
CONFIG_SPL_MMC_HS400_SUPPORT=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_SPL_MMC_SDHCI_ADMA=y
|
||||
CONFIG_MMC_SDHCI_AM654=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_MTD_NOR_FLASH=y
|
||||
CONFIG_CFI_FLASH=y
|
||||
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
||||
CONFIG_FLASH_CFI_MTD=y
|
||||
CONFIG_SYS_FLASH_CFI=y
|
||||
CONFIG_HBMC_AM654=y
|
||||
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_PINCTRL_SINGLE=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_TI_SCI_POWER_DOMAIN=y
|
||||
CONFIG_TI_POWER_DOMAIN=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_TPS65941=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_SPL_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_TPS65941=y
|
||||
CONFIG_K3_SYSTEM_CONTROLLER=y
|
||||
CONFIG_REMOTEPROC_TI_K3_ARM64=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_RESET_TI_SCI=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SOC_DEVICE=y
|
||||
CONFIG_SOC_DEVICE_TI_K3=y
|
||||
CONFIG_SOC_TI=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_CADENCE_QSPI=y
|
||||
CONFIG_HAS_CQSPI_REF_CLK=y
|
||||
CONFIG_CQSPI_REF_CLK=133333333
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SPL_SYSRESET=y
|
||||
CONFIG_SYSRESET_TI_SCI=y
|
||||
CONFIG_TIMER=y
|
||||
CONFIG_SPL_TIMER=y
|
||||
CONFIG_OMAP_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB_GADGET=y
|
||||
CONFIG_SPL_DM_USB_GADGET=y
|
||||
CONFIG_USB_CDNS3=y
|
||||
CONFIG_USB_CDNS3_GADGET=y
|
||||
CONFIG_SPL_USB_CDNS3_GADGET=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x6164
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_FS_EXT4=y
|
||||
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
|
||||
CONFIG_LIB_RATIONAL=y
|
||||
CONFIG_SPL_LIB_RATIONAL=y
|
||||
217
configs/j721s2_hs_evm_a72_defconfig
Normal file
217
configs/j721s2_hs_evm_a72_defconfig
Normal file
@ -0,0 +1,217 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_K3=y
|
||||
CONFIG_TI_SECURE_DEVICE=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x2000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=2
|
||||
CONFIG_SOC_K3_J721S2=y
|
||||
CONFIG_TARGET_J721S2_A72_EVM=y
|
||||
CONFIG_ENV_SIZE=0x20000
|
||||
CONFIG_ENV_OFFSET=0x680000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_DM_SPI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-common-proc-board"
|
||||
CONFIG_SPL_TEXT_BASE=0x80080000
|
||||
CONFIG_SPL_MMC=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_DRIVERS_MISC=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
||||
CONFIG_ENV_OFFSET_REDUND=0x6A0000
|
||||
CONFIG_SPL_FS_FAT=y
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI=y
|
||||
# CONFIG_PSCI_RESET is not set
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
|
||||
CONFIG_FIT_IMAGE_POST_PROCESS=y
|
||||
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
||||
# CONFIG_USE_SPL_FIT_GENERATOR is not set
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit"
|
||||
CONFIG_LOGLEVEL=7
|
||||
CONFIG_SPL_MAX_SIZE=0xc0000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x80a00000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x80000
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
|
||||
CONFIG_SPL_DMA=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_SPL_DM_MAILBOX=y
|
||||
CONFIG_SPL_MTD_SUPPORT=y
|
||||
CONFIG_SPL_DM_SPI_FLASH=y
|
||||
CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_SPL_DM_RESET=y
|
||||
CONFIG_SPL_POWER_DOMAIN=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
# CONFIG_SPL_SPI_FLASH_TINY is not set
|
||||
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
|
||||
CONFIG_SPL_THERMAL=y
|
||||
CONFIG_SPL_USB_GADGET=y
|
||||
CONFIG_SPL_DFU=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_SYS_MAXARGS=64
|
||||
CONFIG_CMD_ASKENV=y
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_MTD=y
|
||||
CONFIG_CMD_REMOTEPROC=y
|
||||
CONFIG_CMD_UFS=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),-@8m(hbmc.rootfs)"
|
||||
CONFIG_CMD_UBI=y
|
||||
# CONFIG_ISO_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_SPL_MULTI_DTB_FIT=y
|
||||
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_CLK_CCF=y
|
||||
CONFIG_CLK_TI_SCI=y
|
||||
CONFIG_DFU_MMC=y
|
||||
CONFIG_DFU_RAM=y
|
||||
CONFIG_DFU_SF=y
|
||||
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
|
||||
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
|
||||
CONFIG_DMA_CHANNELS=y
|
||||
CONFIG_TI_K3_NAVSS_UDMA=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
|
||||
CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_TI_SCI_PROTOCOL=y
|
||||
CONFIG_DA8XX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_I2C_GPIO=y
|
||||
CONFIG_SYS_I2C_OMAP24XX=y
|
||||
CONFIG_DM_MAILBOX=y
|
||||
CONFIG_K3_SEC_PROXY=y
|
||||
CONFIG_SUPPORT_EMMC_BOOT=y
|
||||
CONFIG_MMC_IO_VOLTAGE=y
|
||||
CONFIG_MMC_UHS_SUPPORT=y
|
||||
CONFIG_MMC_HS400_SUPPORT=y
|
||||
CONFIG_SPL_MMC_HS400_SUPPORT=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ADMA=y
|
||||
CONFIG_SPL_MMC_SDHCI_ADMA=y
|
||||
CONFIG_MMC_SDHCI_AM654=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_MTD_NOR_FLASH=y
|
||||
CONFIG_CFI_FLASH=y
|
||||
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
||||
CONFIG_FLASH_CFI_MTD=y
|
||||
CONFIG_SYS_FLASH_CFI=y
|
||||
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPI_FLASH_SOFT_RESET=y
|
||||
CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_S28HS512T=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_MT35XU=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_SPI_FLASH_MTD=y
|
||||
CONFIG_MULTIPLEXER=y
|
||||
CONFIG_MUX_MMIO=y
|
||||
CONFIG_PHY_TI_DP83867=y
|
||||
CONFIG_PHY_FIXED=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_TI_AM65_CPSW_NUSS=y
|
||||
CONFIG_PHY=y
|
||||
CONFIG_SPL_PHY=y
|
||||
CONFIG_PHY_CADENCE_TORRENT=y
|
||||
CONFIG_PHY_J721E_WIZ=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_PINCTRL_SINGLE=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_TI_SCI_POWER_DOMAIN=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_RAM=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_REMOTEPROC_TI_K3_DSP=y
|
||||
CONFIG_REMOTEPROC_TI_K3_R5F=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_RESET_TI_SCI=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SOC_DEVICE=y
|
||||
CONFIG_SOC_DEVICE_TI_K3=y
|
||||
CONFIG_SOC_TI=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_CADENCE_QSPI=y
|
||||
CONFIG_HAS_CQSPI_REF_CLK=y
|
||||
CONFIG_CQSPI_REF_CLK=133333333
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SPL_SYSRESET=y
|
||||
CONFIG_SYSRESET_TI_SCI=y
|
||||
CONFIG_DM_THERMAL=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB_GADGET=y
|
||||
CONFIG_SPL_DM_USB_GADGET=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_CDNS3=y
|
||||
CONFIG_USB_CDNS3_GADGET=y
|
||||
CONFIG_USB_CDNS3_HOST=y
|
||||
CONFIG_SPL_USB_CDNS3_GADGET=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x6168
|
||||
CONFIG_UFS=y
|
||||
CONFIG_CADENCE_UFS=y
|
||||
CONFIG_TI_J721E_UFS=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
178
configs/j721s2_hs_evm_r5_defconfig
Normal file
178
configs/j721s2_hs_evm_r5_defconfig
Normal file
@ -0,0 +1,178 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_K3=y
|
||||
CONFIG_TI_SECURE_DEVICE=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x2000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x10000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SOC_K3_J721S2=y
|
||||
CONFIG_K3_EARLY_CONS=y
|
||||
CONFIG_TARGET_J721S2_R5_EVM=y
|
||||
CONFIG_ENV_SIZE=0x20000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_DM_SPI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board"
|
||||
CONFIG_SPL_TEXT_BASE=0x41c00000
|
||||
CONFIG_SPL_MMC=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_DRIVERS_MISC=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
||||
CONFIG_SPL_SIZE_LIMIT=0x80000
|
||||
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
|
||||
CONFIG_SPL_FS_FAT=y
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI=y
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c76000
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
|
||||
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
||||
# CONFIG_USE_SPL_FIT_GENERATOR is not set
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
|
||||
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
|
||||
CONFIG_SPL_MAX_SIZE=0xc0000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x41c76000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0xa000
|
||||
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_SEPARATE_BSS=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
|
||||
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
|
||||
CONFIG_SPL_EARLY_BSS=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
|
||||
CONFIG_SPL_DMA=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_FS_EXT4=y
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_SPL_DM_MAILBOX=y
|
||||
CONFIG_SPL_MTD_SUPPORT=y
|
||||
CONFIG_SPL_DM_SPI_FLASH=y
|
||||
CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_SPL_DM_RESET=y
|
||||
CONFIG_SPL_POWER_DOMAIN=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
CONFIG_SPL_REMOTEPROC=y
|
||||
# CONFIG_SPL_SPI_FLASH_TINY is not set
|
||||
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
|
||||
CONFIG_SPL_THERMAL=y
|
||||
CONFIG_SPL_USB_GADGET=y
|
||||
CONFIG_SPL_DFU=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_MAXARGS=64
|
||||
CONFIG_SYS_BOOTM_LEN=0x4000000
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_REMOTEPROC=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_SPL_CLK_CCF=y
|
||||
CONFIG_SPL_CLK_K3_PLL=y
|
||||
CONFIG_SPL_CLK_K3=y
|
||||
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
|
||||
CONFIG_DMA_CHANNELS=y
|
||||
CONFIG_TI_K3_NAVSS_UDMA=y
|
||||
CONFIG_TI_SCI_PROTOCOL=y
|
||||
CONFIG_DA8XX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
||||
CONFIG_SYS_I2C_OMAP24XX=y
|
||||
CONFIG_DM_MAILBOX=y
|
||||
CONFIG_K3_SEC_PROXY=y
|
||||
CONFIG_FS_LOADER=y
|
||||
CONFIG_SPL_FS_LOADER=y
|
||||
CONFIG_SUPPORT_EMMC_BOOT=y
|
||||
CONFIG_SPL_MMC_HS400_SUPPORT=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_SPL_MMC_SDHCI_ADMA=y
|
||||
CONFIG_MMC_SDHCI_AM654=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_MTD_NOR_FLASH=y
|
||||
CONFIG_CFI_FLASH=y
|
||||
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
||||
CONFIG_FLASH_CFI_MTD=y
|
||||
CONFIG_SYS_FLASH_CFI=y
|
||||
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPI_FLASH_SOFT_RESET=y
|
||||
CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_S28HS512T=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_MT35XU=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_PINCTRL_SINGLE=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_TI_POWER_DOMAIN=y
|
||||
CONFIG_K3_SYSTEM_CONTROLLER=y
|
||||
CONFIG_REMOTEPROC_TI_K3_ARM64=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_RESET_TI_SCI=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SOC_DEVICE=y
|
||||
CONFIG_SOC_DEVICE_TI_K3=y
|
||||
CONFIG_SOC_TI=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_CADENCE_QSPI=y
|
||||
CONFIG_HAS_CQSPI_REF_CLK=y
|
||||
CONFIG_CQSPI_REF_CLK=133333333
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SPL_SYSRESET=y
|
||||
CONFIG_SYSRESET_TI_SCI=y
|
||||
CONFIG_DM_THERMAL=y
|
||||
CONFIG_TIMER=y
|
||||
CONFIG_SPL_TIMER=y
|
||||
CONFIG_OMAP_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB_GADGET=y
|
||||
CONFIG_SPL_DM_USB_GADGET=y
|
||||
CONFIG_USB_CDNS3=y
|
||||
CONFIG_USB_CDNS3_GADGET=y
|
||||
CONFIG_SPL_USB_CDNS3_GADGET=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x6168
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_FS_EXT4=y
|
||||
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
|
||||
CONFIG_PANIC_HANG=y
|
||||
CONFIG_LIB_RATIONAL=y
|
||||
CONFIG_SPL_LIB_RATIONAL=y
|
||||
@ -4,7 +4,7 @@ CONFIG_SYS_L2CACHE_OFF=y
|
||||
CONFIG_ARCH_OMAP2PLUS=y
|
||||
CONFIG_SYS_MALLOC_LEN=0xc0000
|
||||
CONFIG_TARGET_NOKIA_RX51=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x80000000
|
||||
CONFIG_SYS_LOAD_ADDR=0x80008000
|
||||
CONFIG_OPTIMIZE_INLINING=y
|
||||
CONFIG_LTO=y
|
||||
# CONFIG_FIT is not set
|
||||
|
||||
@ -158,8 +158,7 @@ UBIFS support add following lines into file ``configs/nokia_rx51_defconfig``::
|
||||
|
||||
CONFIG_CMD_UBI=y
|
||||
CONFIG_CMD_UBIFS=y
|
||||
CONFIG_MTD_UBI_FASTMAP=y
|
||||
CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=10
|
||||
|
||||
Run in QEMU
|
||||
-----------
|
||||
|
||||
@ -27,44 +27,18 @@
|
||||
* the Linux kernel.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SPL_OS_BOOT
|
||||
/* RAW SD card / eMMC */
|
||||
|
||||
#endif /* CONFIG_SPL_OS_BOOT */
|
||||
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
||||
#endif /* CONFIG_MTD_RAW_NAND */
|
||||
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
#define NANDTGTS \
|
||||
"cfgscr=mw ${dtbaddr} 0; nand read ${cfgaddr} cfgscr && source ${cfgaddr};" \
|
||||
" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
|
||||
"nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
|
||||
"root=mtd6 rootfstype=jffs2 b_mode=${b_mode}\0" \
|
||||
"b_nand=nand read ${loadaddr} kernel; nand read ${dtbaddr} dtb; " \
|
||||
"run nandargs; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \
|
||||
"b_tgts_std=usb0 nand net\0" \
|
||||
"b_tgts_rcy=net usb0 nand\0" \
|
||||
"b_tgts_pme=usb0 nand net\0"
|
||||
#else
|
||||
#define NANDTGTS ""
|
||||
#endif /* CONFIG_MTD_RAW_NAND */
|
||||
|
||||
#define MMCSPI_TGTS \
|
||||
#define MMC_TGTS \
|
||||
"t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
|
||||
"b_mode=${b_mode} root=/dev/mmcblk0p2 rootfstype=ext4\0" \
|
||||
"b_mode=${b_mode} root=${root_dev} rootfstype=ext4 rootwait\0" \
|
||||
"b_t30lgcy#0=" \
|
||||
"load ${loaddev}:2 ${loadaddr} /boot/PPTImage.md5 && " \
|
||||
"load ${loaddev}:2 ${loadaddr} /boot/zImage && " \
|
||||
"load ${loaddev}:2 ${dtbaddr} /boot/am335x-ppt30.dtb || " \
|
||||
"load ${loaddev}:1 ${dtbaddr} am335x-ppt30-legacy.dtb; "\
|
||||
"run load_dtb && " \
|
||||
"run t30args#0; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \
|
||||
"t30args#1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
|
||||
"b_mode=${b_mode}\0" \
|
||||
"b_t30lgcy#1=" \
|
||||
"load ${loaddev}:1 ${loadaddr} zImage && " \
|
||||
"load ${loaddev}:1 ${dtbaddr} am335x-ppt30.dtb && " \
|
||||
"load ${loaddev}:1 ${dtbaddr} am335x-brppt30.dtb && " \
|
||||
"load ${loaddev}:1 ${ramaddr} rootfsPPT30.uboot && " \
|
||||
"run t30args#1; run cfgscr; bootz ${loadaddr} ${ramaddr} ${dtbaddr}\0" \
|
||||
"b_mmc0=load ${loaddev}:1 ${scraddr} bootscr.img && source ${scraddr}\0" \
|
||||
@ -72,28 +46,25 @@
|
||||
"b_tgts_std=mmc0 mmc1 t30lgcy#0 t30lgcy#1 usb0 net\0" \
|
||||
"b_tgts_rcy=t30lgcy#1 usb0 net\0" \
|
||||
"b_tgts_pme=net usb0 mmc0 mmc1\0" \
|
||||
"loaddev=mmc 1\0"
|
||||
"loaddev=mmc 1\0" \
|
||||
"root_dev=/dev/mmcblk0p2\0" \
|
||||
"load_dtb=load ${loaddev}:2 ${dtbaddr} /boot/am335x-brppt30.dtb; " \
|
||||
"if test $? -eq 0; then " \
|
||||
"setenv root_dev /dev/mmcblk1p2; " \
|
||||
"else; " \
|
||||
"load ${loaddev}:1 ${dtbaddr} am335x-brppt30-legacy.dtb; " \
|
||||
"fi;\0"
|
||||
|
||||
#ifdef CONFIG_ENV_IS_IN_MMC
|
||||
#define MMCTGTS \
|
||||
MMCSPI_TGTS \
|
||||
"cfgscr=mw ${dtbaddr} 0;" \
|
||||
MMC_TGTS \
|
||||
"cfgscr=mw ${cfgaddr} 0;" \
|
||||
" mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr};" \
|
||||
" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0"
|
||||
#else
|
||||
#define MMCTGTS ""
|
||||
#endif /* CONFIG_MMC */
|
||||
|
||||
#ifdef CONFIG_SPI
|
||||
#define SPITGTS \
|
||||
MMCSPI_TGTS \
|
||||
"cfgscr=mw ${dtbaddr} 0;" \
|
||||
" sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr};" \
|
||||
" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0"
|
||||
#else
|
||||
#define SPITGTS ""
|
||||
#endif /* CONFIG_SPI */
|
||||
|
||||
#define LOAD_OFFSET(x) 0x8##x
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
@ -110,8 +81,6 @@ BUR_COMMON_ENV \
|
||||
"b_usb0=usb start && load usb 0 ${scraddr} bootscr.img && source ${scraddr}\0" \
|
||||
"b_net=tftp ${scraddr} netscript.img && source ${scraddr}\0" \
|
||||
MMCTGTS \
|
||||
SPITGTS \
|
||||
NANDTGTS \
|
||||
"b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
|
||||
" elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
|
||||
" else setenv b_tgts ${b_tgts_std}; fi\0" \
|
||||
@ -119,28 +88,4 @@ NANDTGTS \
|
||||
" do echo \"### booting ${target} ###\"; run b_${target};" \
|
||||
" if test ${b_break} = 1; then; exit; fi; done\0"
|
||||
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
/*
|
||||
* GPMC block. We support 1 device and the physical address to
|
||||
* access CS0 at is 0x8000000.
|
||||
*/
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x8000000
|
||||
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
|
||||
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
|
||||
10, 11, 12, 13, 14, 15, 16, 17, \
|
||||
18, 19, 20, 21, 22, 23, 24, 25, \
|
||||
26, 27, 28, 29, 30, 31, 32, 33, \
|
||||
34, 35, 36, 37, 38, 39, 40, 41, \
|
||||
42, 43, 44, 45, 46, 47, 48, 49, \
|
||||
50, 51, 52, 53, 54, 55, 56, 57, }
|
||||
|
||||
#define CONFIG_SYS_NAND_ECCSIZE 512
|
||||
#define CONFIG_SYS_NAND_ECCBYTES 14
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
||||
|
||||
#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
|
||||
#endif /* CONFIG_MTD_RAW_NAND */
|
||||
|
||||
#endif /* ! __CONFIG_BRPPT1_H__ */
|
||||
|
||||
@ -34,9 +34,20 @@ echo "========== Compiling U-Boot for Nokia RX-51 board =========="
|
||||
echo "============================================================"
|
||||
echo
|
||||
|
||||
# First compile u-boot.bin binary for Nokia RX-51 board
|
||||
# First compile u-boot-ubifs.bin binary with UBI/UBIFS support for Nokia RX-51 board according to doc/board/nokia/rx51.rst
|
||||
make nokia_rx51_config
|
||||
make -j4 u-boot.bin ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
|
||||
cat >> .config << EOF
|
||||
CONFIG_CMD_UBI=y
|
||||
CONFIG_CMD_UBIFS=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=10
|
||||
EOF
|
||||
make olddefconfig
|
||||
make -j4 u-boot.bin CROSS_COMPILE=arm-linux-gnueabi-
|
||||
mv u-boot.bin u-boot-ubifs.bin
|
||||
|
||||
# Then compile standard u-boot.bin binary for Nokia RX-51 board
|
||||
make nokia_rx51_config
|
||||
make -j4 u-boot.bin CROSS_COMPILE=arm-linux-gnueabi-
|
||||
|
||||
# And then do all stuff in temporary directory
|
||||
mkdir -p nokia_rx51_tmp
|
||||
@ -44,6 +55,7 @@ cd nokia_rx51_tmp
|
||||
|
||||
test -f mkimage || ln -s ../tools/mkimage .
|
||||
test -f u-boot.bin || ln -s ../u-boot.bin .
|
||||
test -f u-boot-ubifs.bin || ln -s ../u-boot-ubifs.bin .
|
||||
|
||||
echo
|
||||
echo "=========================================================================="
|
||||
@ -99,6 +111,10 @@ echo "========== Generating images =========="
|
||||
echo "======================================="
|
||||
echo
|
||||
|
||||
# Generate kernel image in zImage and uImage format from FIASCO format
|
||||
dd if=kernel_2.6.28/boot/zImage-2.6.28-20103103+0m5.fiasco of=zImage-2.6.28-omap1 skip=95 bs=1
|
||||
./mkimage -A arm -O linux -T kernel -C none -a 80008000 -e 80008000 -n zImage-2.6.28-omap1 -d zImage-2.6.28-omap1 uImage-2.6.28-omap1
|
||||
|
||||
# Generate rootfs directory
|
||||
mkdir -p rootfs
|
||||
mkdir -p rootfs/dev/
|
||||
@ -123,20 +139,7 @@ echo
|
||||
EOF
|
||||
chmod +x rootfs/sbin/preinit
|
||||
|
||||
# Generate ubi config file for ubi rootfs image
|
||||
cat > ubi.ini << EOF
|
||||
[rootfs]
|
||||
mode=ubi
|
||||
image=ubifs.img
|
||||
vol_id=0
|
||||
vol_size=160MiB
|
||||
vol_type=dynamic
|
||||
vol_name=rootfs
|
||||
vol_alignment=1
|
||||
vol_flags=autoresize
|
||||
EOF
|
||||
|
||||
# Generate ubi rootfs image from rootfs directory
|
||||
# Generate ubifs image from rootfs directory
|
||||
# NOTE: Character device on host filesystem can be created only by root
|
||||
# But we do not need it on host filesystem, just in ubifs image
|
||||
# So run mknod and mkfs.ubifs commands under fakeroot program
|
||||
@ -149,8 +152,35 @@ fakeroot sh -c '
|
||||
mknod rootfs/dev/console c 5 1;
|
||||
/usr/sbin/mkfs.ubifs -m 2048 -e 129024 -c 2047 -r rootfs ubifs.img;
|
||||
'
|
||||
|
||||
# Generate ubi image with rootfs on first volume
|
||||
cat > ubi.ini << EOF
|
||||
[rootfs]
|
||||
mode=ubi
|
||||
image=ubifs.img
|
||||
vol_id=0
|
||||
vol_size=230MiB # 1870 LEBs
|
||||
vol_type=dynamic
|
||||
vol_name=rootfs
|
||||
vol_alignment=1
|
||||
vol_flags=autoresize
|
||||
EOF
|
||||
/usr/sbin/ubinize -o ubi.img -p 128KiB -m 2048 -s 512 ubi.ini
|
||||
|
||||
# Generate ubi image with rootfs on first volume and kernel in zImage format on second volume for UBI booting
|
||||
cp ubi.ini ubi_with_kernel.ini
|
||||
cat >> ubi_with_kernel.ini << EOF
|
||||
[kernel]
|
||||
mode=ubi
|
||||
image=zImage-2.6.28-omap1
|
||||
vol_id=1
|
||||
vol_size=2MiB
|
||||
vol_type=dynamic
|
||||
vol_name=kernel
|
||||
vol_alignment=1
|
||||
EOF
|
||||
/usr/sbin/ubinize -o ubi_with_kernel.img -p 128KiB -m 2048 -s 512 ubi_with_kernel.ini
|
||||
|
||||
# Generate bootmenu for U-Boot serial console testing
|
||||
cat > bootmenu_uboot << EOF
|
||||
setenv bootmenu_0 'Serial console test=echo; echo "Testing serial console"; echo; echo "Successfully booted"; echo; poweroff';
|
||||
@ -178,15 +208,24 @@ setenv bootdelay 1;
|
||||
EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_emmc2 -d bootmenu_emmc2 bootmenu_emmc2.scr
|
||||
|
||||
# Generate bootmenu for OneNAND booting
|
||||
# Generate bootmenu for OneNAND booting (uImage)
|
||||
cat > bootmenu_nand << EOF
|
||||
setenv bootmenu_0 'uImage-2.6.28-omap1 from OneNAND=mtd read initfs \${kernaddr}; setenv bootargs; setenv setup_omap_atag 1; bootm \${kernaddr}';
|
||||
setenv bootmenu_0 'uImage-2.6.28-omap1 from OneNAND=setenv bootargs; setenv setup_omap_atag 1; mtd read initfs \${kernaddr} && bootm \${kernaddr}';
|
||||
setenv bootmenu_1;
|
||||
setenv bootmenu_delay 1;
|
||||
setenv bootdelay 1;
|
||||
EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_nand -d bootmenu_nand bootmenu_nand.scr
|
||||
|
||||
# Generate bootmenu for UBI booting (zImage)
|
||||
cat > bootmenu_ubi << EOF
|
||||
setenv bootmenu_0 'zImage-2.6.28-omap1 from UBI=setenv bootargs; setenv setup_omap_atag 1; ubi part rootfs && ubi read \${kernaddr} kernel && bootz \${kernaddr}';
|
||||
setenv bootmenu_1;
|
||||
setenv bootmenu_delay 1;
|
||||
setenv bootdelay 1;
|
||||
EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_ubi -d bootmenu_ubi bootmenu_ubi.scr
|
||||
|
||||
# Generate bootmenu for default booting
|
||||
cat > bootmenu_default << EOF
|
||||
setenv bootmenu_delay 1;
|
||||
@ -195,9 +234,7 @@ EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_default -d bootmenu_default bootmenu_default.scr
|
||||
|
||||
# Generate combined image from u-boot and Maemo fiasco kernel
|
||||
dd if=kernel_2.6.28/boot/zImage-2.6.28-20103103+0m5.fiasco of=zImage-2.6.28-omap1 skip=95 bs=1
|
||||
./u-boot-gen-combined u-boot.bin zImage-2.6.28-omap1 combined_zimage.bin
|
||||
./mkimage -A arm -O linux -T kernel -C none -a 80008000 -e 80008000 -n zImage-2.6.28-omap1 -d zImage-2.6.28-omap1 uImage-2.6.28-omap1
|
||||
./u-boot-gen-combined u-boot.bin uImage-2.6.28-omap1 combined_uimage.bin
|
||||
|
||||
# Generate combined hack image from u-boot and Maemo fiasco kernel (kernel starts at 2MB offset and qflasher puts 2kB header before supplied image)
|
||||
@ -221,11 +258,16 @@ mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_em
|
||||
mcopy zImage-2.6.28-omap1 ::/zImage-2.6.28-omap1 -i emmc_emmc2.img
|
||||
mcopy bootmenu_emmc2.scr ::/bootmenu.scr -i emmc_emmc2.img
|
||||
|
||||
# Generate FAT32 eMMC image for OneNAND booting
|
||||
# Generate FAT32 eMMC image for OneNAND booting (uImage)
|
||||
truncate -s 50MiB emmc_nand.img
|
||||
mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_nand.img
|
||||
mcopy bootmenu_nand.scr ::/bootmenu.scr -i emmc_nand.img
|
||||
|
||||
# Generate FAT32 eMMC image for UBI booting (zImage)
|
||||
truncate -s 50MiB emmc_ubi.img
|
||||
mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_ubi.img
|
||||
mcopy bootmenu_ubi.scr ::/bootmenu.scr -i emmc_ubi.img
|
||||
|
||||
# Generate FAT32 eMMC image for default booting
|
||||
truncate -s 50MiB emmc_default.img
|
||||
mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_default.img
|
||||
@ -251,6 +293,10 @@ rm -f mtd_emmc.img
|
||||
rm -f mtd_nand.img
|
||||
./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k combined_hack.bin -r ubi.img -m rx51 -p k=4094,i=2 -o mtd_nand.img
|
||||
|
||||
# Generate MTD image for UBI booting from bootloader nolo images, u-boot image with UBI/UBIFS support and rootfs image with kernel volume
|
||||
rm -f mtd_ubi.img
|
||||
./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k u-boot-ubifs.bin -r ubi_with_kernel.img -m rx51 -o mtd_ubi.img
|
||||
|
||||
echo
|
||||
echo "======================================================"
|
||||
echo "========== Running test images in n900 qemu =========="
|
||||
@ -329,6 +375,18 @@ wait -n $sleep_pid $qemu_pid || true
|
||||
kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true
|
||||
wait || true
|
||||
|
||||
# Run MTD image in qemu and wait for 300s if kernel from UBI is correctly booted
|
||||
rm -f qemu_ubi.log
|
||||
./qemu-system-arm -M n900 -mtdblock mtd_ubi.img -sd emmc_ubi.img -serial /dev/stdout -display none > qemu_ubi.log &
|
||||
qemu_pid=$!
|
||||
tail -F qemu_ubi.log &
|
||||
tail_pid=$!
|
||||
sleep 300 &
|
||||
sleep_pid=$!
|
||||
wait -n $sleep_pid $qemu_pid || true
|
||||
kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true
|
||||
wait || true
|
||||
|
||||
echo
|
||||
echo "============================="
|
||||
echo "========== Results =========="
|
||||
@ -341,10 +399,11 @@ if grep -q 'Successfully booted' qemu_ram2.log; then echo "Kernel (zImage) was s
|
||||
if grep -q 'Successfully booted' qemu_emmc.log; then echo "Kernel (uImage) was successfully booted from eMMC"; else echo "Failed to boot kernel (uImage) from eMMC"; fi
|
||||
if grep -q 'Successfully booted' qemu_emmc2.log; then echo "Kernel (zImage) was successfully booted from eMMC"; else echo "Failed to boot kernel (zImage) from eMMC"; fi
|
||||
if grep -q 'Successfully booted' qemu_nand.log; then echo "Kernel (uImage) was successfully booted from OneNAND"; else echo "Failed to boot kernel (uImage) from OneNAND"; fi
|
||||
if grep -q 'Successfully booted' qemu_ubi.log; then echo "Kernel (zImage) was successfully booted from UBI"; else echo "Failed to boot kernel (zImage) from UBI"; fi
|
||||
|
||||
echo
|
||||
|
||||
if grep -q 'Successfully booted' qemu_uboot.log && grep -q 'Successfully booted' qemu_ram.log && grep -q 'Successfully booted' qemu_ram2.log && grep -q 'Successfully booted' qemu_emmc.log && grep -q 'Successfully booted' qemu_emmc2.log && grep -q 'Successfully booted' qemu_nand.log; then
|
||||
if grep -q 'Successfully booted' qemu_uboot.log && grep -q 'Successfully booted' qemu_ram.log && grep -q 'Successfully booted' qemu_ram2.log && grep -q 'Successfully booted' qemu_emmc.log && grep -q 'Successfully booted' qemu_emmc2.log && grep -q 'Successfully booted' qemu_nand.log && grep -q 'Successfully booted' qemu_ubi.log; then
|
||||
echo "All tests passed"
|
||||
exit 0
|
||||
else
|
||||
|
||||
Loading…
Reference in New Issue
Block a user