leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

imx: ventana: detect pmic using i2c probe instead of board model

Browse Source 
Avoid requiring board-model and probe pmic by its i2c address.
This is in preparation for being able to call pmic_setup() from SPL
and not need board type.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
This commit is contained in:
Tim Harvey 2015-05-08 18:28:37 -07:00 committed by Stefano Babic
parent 2d833c8528
commit 6d38f3a85d
3 changed files with 9 additions and 5 deletions
board/gateworks/gw_ventana
common.ccommon.hgw_ventana.c

10
board/gateworks/gw_ventana/common.c
View File

@ -759,13 +759,16 @@ void setup_board_gpio(int board, struct ventana_board_info *info)
}
/* setup board specific PMIC */
void setup_pmic(int board)
void setup_pmic(void)
{
struct pmic *p;
u32 reg;
i2c_set_bus_num(CONFIG_I2C_PMIC);
/* configure PFUZE100 PMIC */
if (board == GW54xx || board == GW54proto) {
if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) {
debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR);
power_pfuze100_init(CONFIG_I2C_PMIC);
p = pmic_get("PFUZE100");
if (p && !pmic_probe(p)) {
@ -787,7 +790,8 @@ void setup_pmic(int board)
}
/* configure LTC3676 PMIC */
else {
else if (!i2c_probe(CONFIG_POWER_LTC3676_I2C_ADDR)) {
debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR);
power_ltc3676_init(CONFIG_I2C_PMIC);
p = pmic_get("LTC3676_PMIC");
if (p && !pmic_probe(p)) {

2
board/gateworks/gw_ventana/common.h
View File

@ -89,7 +89,7 @@ void setup_ventana_i2c(void);
/* configure uart iomux */
void setup_iomux_uart(void);
/* conifgure PMIC */
void setup_pmic(int board);
void setup_pmic(void);
/* configure gpio iomux/defaults */
void setup_iomux_gpio(int board, struct ventana_board_info *);
/* late setup of GPIO (configuration per baseboard and env) */

2
board/gateworks/gw_ventana/gw_ventana.c
View File

@ -468,7 +468,7 @@ static void setup_display(void)
/* setup board specific PMIC */
int power_init_board(void)
{
setup_pmic(board_type);
setup_pmic();
return 0;
}