leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

riscv: Add Microchip MPFS Icicle Kit support

Browse Source 
This patch adds Microchip MPFS Icicle Kit support. For now, only
NS16550 Serial, Microchip clock, Cadence eMMC and MACB drivers are
enabled. The Microchip MPFS Icicle defconfig by default builds
U-Boot for S-Mode because U-Boot on Microchip PolarFire SoC will run
in S-Mode as payload of HSS + OpenSBI.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
This commit is contained in:
Padmarao Begari
2021-01-15 08:20:40 +05:30
committed by Andes
parent dd4ee416a6
commit 64413e1b7c
4 changed files with 145 additions and 45 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
board/microchip/mpfs_icicle/Kconfig
View File

@@ -20,7 +20,30 @@ config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select GENERIC_RISCV
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
imply SMP
imply CLK_CCF
imply CLK_MPFS
imply SYS_NS16550
imply CMD_DHCP
imply CMD_EXT2
imply CMD_EXT4
imply CMD_FAT
imply CMD_FS_GENERIC
imply CMD_NET
imply CMD_PING
imply CMD_MMC
imply DOS_PARTITION
imply EFI_PARTITION
imply IP_DYN
imply ISO_PARTITION
imply MACB
imply MII
imply PHY_LIB
imply PHY_VITESSE
imply MMC
imply MMC_WRITE
imply MMC_SDHCI
imply MMC_SDHCI_CADENCE
endif

99
board/microchip/mpfs_icicle/mpfs_icicle.c
View File

@@ -6,10 +6,49 @@
#include <common.h>
#include <dm.h>
#include <env.h>
#include <init.h>
#include <asm/io.h>
#define MPFS_SYSREG_SOFT_RESET ((unsigned int *)0x20002088)
DECLARE_GLOBAL_DATA_PTR;
#define MPFS_SYSREG_SOFT_RESET ((unsigned int *)0x20002088)
#define MPFS_SYS_SERVICE_CR ((unsigned int *)0x37020050)
#define MPFS_SYS_SERVICE_SR ((unsigned int *)0x37020054)
#define MPFS_SYS_SERVICE_MAILBOX ((unsigned char *)0x37020800)
#define PERIPH_RESET_VALUE 0x1e8u
#define SERVICE_CR_REQ 0x1u
#define SERVICE_SR_BUSY 0x2u
static void read_device_serial_number(u8 *response, u8 response_size)
{
u8 idx;
u8 *response_buf;
unsigned int val;
response_buf = (u8 *)response;
writel(SERVICE_CR_REQ, MPFS_SYS_SERVICE_CR);
/*
* REQ bit will remain set till the system controller starts
* processing.
*/
do {
val = readl(MPFS_SYS_SERVICE_CR);
} while (SERVICE_CR_REQ == (val & SERVICE_CR_REQ));
/*
* Once system controller starts processing the busy bit will
* go high and service is completed when busy bit is gone low
*/
do {
val = readl(MPFS_SYS_SERVICE_SR);
} while (SERVICE_SR_BUSY == (val & SERVICE_SR_BUSY));
for (idx = 0; idx < response_size; idx++)
response_buf[idx] = readb(MPFS_SYS_SERVICE_MAILBOX + idx);
}
int board_init(void)
{
@@ -22,10 +61,64 @@ int board_early_init_f(void)
{
unsigned int val;
/* Reset uart peripheral */
/* Reset uart, mmc peripheral */
val = readl(MPFS_SYSREG_SOFT_RESET);
val = (val & ~(1u << 5u));
val = (val & ~(PERIPH_RESET_VALUE));
writel(val, MPFS_SYSREG_SOFT_RESET);
return 0;
}
int board_late_init(void)
{
u32 ret;
u32 node;
u8 idx;
u8 device_serial_number[16] = { 0 };
unsigned char mac_addr[6];
char icicle_mac_addr[20];
void *blob = (void *)gd->fdt_blob;
node = fdt_path_offset(blob, "ethernet0");
if (node < 0) {
printf("No ethernet0 path offset\n");
return -ENODEV;
}
ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6);
if (ret) {
printf("No local-mac-address property\n");
return -EINVAL;
}
read_device_serial_number(device_serial_number, 16);
/* Update MAC address with device serial number */
mac_addr[0] = 0x00;
mac_addr[1] = 0x04;
mac_addr[2] = 0xA3;
mac_addr[3] = device_serial_number[2];
mac_addr[4] = device_serial_number[1];
mac_addr[5] = device_serial_number[0];
ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
if (ret) {
printf("Error setting local-mac-address property\n");
return -ENODEV;
}
icicle_mac_addr[0] = '[';
sprintf(&icicle_mac_addr[1], "%pM", mac_addr);
icicle_mac_addr[18] = ']';
icicle_mac_addr[19] = '\0';
for (idx = 0; idx < 20; idx++) {
if (icicle_mac_addr[idx] == ':')
icicle_mac_addr[idx] = ' ';
}
env_set("icicle_mac_addr", icicle_mac_addr);
return 0;
}