Merge tag 'ti-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix boot on am335x guardian board - Increase OPSI speed on AM65x and J721E devices - Use JTAD register for identifying K3 devices. - Update TI entry in MAINTAINERS file.
This commit is contained in:
Tom Rini
commit
62c59545ba
25
MAINTAINERS
25
MAINTAINERS
@ -423,8 +423,33 @@ T: git https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git
|
||||
F: arch/arm/mach-davinci/
|
||||
F: arch/arm/mach-k3/
|
||||
F: arch/arm/mach-keystone/
|
||||
F: arch/arm/mach-omap2/
|
||||
F: arch/arm/include/asm/arch-omap*/
|
||||
F: arch/arm/include/asm/ti-common/
|
||||
F: board/ti/
|
||||
F: drivers/dma/ti*
|
||||
F: drivers/firmware/ti_sci.*
|
||||
F: drivers/gpio/omap_gpio.c
|
||||
F: drivers/memory/ti-aemif.c
|
||||
F: drivers/misc/k3_avs.c
|
||||
F: drivers/mailbox/k3-sec-procy.c
|
||||
F: drivers/pci/pcie_dw_ti.c
|
||||
F: drivers/phy/keystone-usb-phy.c
|
||||
F: drivers/phy/omap-usb2-phy.c
|
||||
F: drivers/phy/phy-ti-am654.c
|
||||
F: drivers/phy/ti-pipe3-phy.c
|
||||
F: drivers/ram/k3*
|
||||
F: drivers/remoteproc/k3_system_controller.c
|
||||
F: drivers/remoteproc/ti*
|
||||
F: drivers/reset/reset-ti-sci.c
|
||||
F: drivers/rtc/davinci.c
|
||||
F: drivers/serial/serial_omap.c
|
||||
F: drivers/soc/ti/
|
||||
F: drivers/sysreset/sysreset-ti-sci.c
|
||||
F: drivers/thermal/ti-bandgap.c
|
||||
F: drivers/timer/omap-timer.c
|
||||
F: drivers/watchdog/omap_wdt.c
|
||||
F: include/linux/soc/ti/
|
||||
|
||||
ARM U8500
|
||||
M: Stephan Gerhold <stephan@gerhold.net>
|
||||
|
||||
@ -58,7 +58,7 @@
|
||||
label = "guardian:life-led";
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
@ -202,8 +202,33 @@
|
||||
};
|
||||
|
||||
partition@6 {
|
||||
label = "u-boot-2";
|
||||
reg = <0x300000 0x100000>;
|
||||
};
|
||||
|
||||
partition@7 {
|
||||
label = "u-boot-2.backup1";
|
||||
reg = <0x400000 0x100000>;
|
||||
};
|
||||
|
||||
partition@8 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x500000 0x40000>;
|
||||
};
|
||||
|
||||
partition@9 {
|
||||
label = "u-boot-env.backup1";
|
||||
reg = <0x540000 0x40000>;
|
||||
};
|
||||
|
||||
partition@10 {
|
||||
label = "splash-screen";
|
||||
reg = <0x580000 0x40000>;
|
||||
};
|
||||
|
||||
partition@11 {
|
||||
label = "UBI";
|
||||
reg = <0x300000 0x1fd00000>;
|
||||
reg = <0x5c0000 0x1fa40000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -191,7 +191,7 @@
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <8>;
|
||||
spi-max-frequency = <40000000>;
|
||||
spi-max-frequency = <50000000>;
|
||||
cdns,tshsl-ns = <60>;
|
||||
cdns,tsd2d-ns = <60>;
|
||||
cdns,tchsh-ns = <60>;
|
||||
|
||||
@ -268,7 +268,7 @@
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <8>;
|
||||
spi-max-frequency = <40000000>;
|
||||
spi-max-frequency = <50000000>;
|
||||
cdns,tshsl-ns = <60>;
|
||||
cdns,tsd2d-ns = <60>;
|
||||
cdns,tchsh-ns = <60>;
|
||||
|
||||
@ -309,7 +309,7 @@
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <8>;
|
||||
spi-max-frequency = <40000000>;
|
||||
spi-max-frequency = <50000000>;
|
||||
cdns,tshsl-ns = <60>;
|
||||
cdns,tsd2d-ns = <60>;
|
||||
cdns,tchsh-ns = <60>;
|
||||
|
||||
@ -87,7 +87,7 @@
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <8>;
|
||||
spi-max-frequency = <40000000>;
|
||||
spi-max-frequency = <50000000>;
|
||||
cdns,tshsl-ns = <60>;
|
||||
cdns,tsd2d-ns = <60>;
|
||||
cdns,tchsh-ns = <60>;
|
||||
|
||||
@ -307,15 +307,15 @@ int print_cpuinfo(void)
|
||||
u32 soc, rev;
|
||||
char *name;
|
||||
|
||||
soc = (readl(CTRLMMR_WKUP_JTAG_DEVICE_ID) &
|
||||
DEVICE_ID_FAMILY_MASK) >> DEVICE_ID_FAMILY_SHIFT;
|
||||
soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
|
||||
JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
|
||||
rev = (readl(CTRLMMR_WKUP_JTAG_ID) &
|
||||
JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT;
|
||||
|
||||
printf("SoC: ");
|
||||
switch (soc) {
|
||||
case AM654:
|
||||
name = "AM654";
|
||||
case AM65X:
|
||||
name = "AM65x";
|
||||
break;
|
||||
case J721E:
|
||||
name = "J721E";
|
||||
|
||||
@ -8,8 +8,8 @@
|
||||
|
||||
#include <asm/armv7_mpu.h>
|
||||
|
||||
#define AM654 2
|
||||
#define J721E 4
|
||||
#define AM65X 0xbb5a
|
||||
#define J721E 0xbb64
|
||||
|
||||
#define REV_PG1_0 0
|
||||
#define REV_PG2_0 1
|
||||
|
||||
@ -15,20 +15,10 @@
|
||||
#endif
|
||||
|
||||
/* Assuming these addresses and definitions stay common across K3 devices */
|
||||
#define CTRLMMR_WKUP_JTAG_DEVICE_ID 0x43000018
|
||||
#define DEVICE_ID_FAMILY_SHIFT 26
|
||||
#define DEVICE_ID_FAMILY_MASK (0x3f << 26)
|
||||
#define DEVICE_ID_BASE_SHIFT 11
|
||||
#define DEVICE_ID_BASE_MASK (0x1fff << 11)
|
||||
#define DEVICE_ID_SPEED_SHIFT 6
|
||||
#define DEVICE_ID_SPEED_MASK (0x1f << 6)
|
||||
#define DEVICE_ID_TEMP_SHIFT 3
|
||||
#define DEVICE_ID_TEMP_MASK (0x7 << 3)
|
||||
|
||||
#define CTRLMMR_WKUP_JTAG_ID 0x43000014
|
||||
#define CTRLMMR_WKUP_JTAG_ID 0x43000014
|
||||
#define JTAG_ID_VARIANT_SHIFT 28
|
||||
#define JTAG_ID_VARIANT_MASK (0xf << 28)
|
||||
#define JTAG_ID_PARTNO_SHIFT 12
|
||||
#define JTAG_ID_PARTNO_MASK (0x7ff << 1)
|
||||
#define JTAG_ID_PARTNO_MASK (0xffff << 12)
|
||||
|
||||
#endif /* _ASM_ARCH_HARDWARE_H_ */
|
||||
|
||||
@ -14,6 +14,7 @@
|
||||
#include <env_internal.h>
|
||||
#include <errno.h>
|
||||
#include <i2c.h>
|
||||
#include <led.h>
|
||||
#include <miiphy.h>
|
||||
#include <panel.h>
|
||||
#include <power/tps65217.h>
|
||||
@ -232,6 +233,9 @@ err:
|
||||
|
||||
int board_late_init(void)
|
||||
{
|
||||
#ifdef CONFIG_LED_GPIO
|
||||
led_default_state();
|
||||
#endif
|
||||
set_bootmode_env();
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -5,10 +5,13 @@ CONFIG_SPL_GPIO_SUPPORT=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_ENV_SIZE=0x40000
|
||||
CONFIG_ENV_OFFSET=0x500000
|
||||
CONFIG_AM33XX=y
|
||||
CONFIG_TARGET_AM335X_GUARDIAN=y
|
||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
||||
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
|
||||
CONFIG_BOOTCOUNT_BOOTLIMIT=3
|
||||
CONFIG_SYS_BOOTCOUNT_ADDR=0x44E3E000
|
||||
CONFIG_SPL=y
|
||||
CONFIG_BOOTSTAGE_STASH_ADDR=0x0
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
@ -20,6 +23,11 @@ CONFIG_ARCH_MISC_INIT=y
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_SEPARATE_BSS=y
|
||||
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
||||
CONFIG_ENV_OFFSET_REDUND=0x540000
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_SPL_ENV_IS_NOWHERE=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_ETH_SUPPORT=y
|
||||
CONFIG_SPL_I2C_SUPPORT=y
|
||||
@ -37,6 +45,7 @@ CONFIG_CMD_SPL=y
|
||||
CONFIG_CMD_SPL_NAND_OFS=0x0
|
||||
CONFIG_CMD_ASKENV=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_LED is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
@ -46,18 +55,19 @@ CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(SPL),256k(SPL.backup1),256k(SPL.backup2),256k(SPL.backup3),1m(u-boot),1m(u-boot.backup1),-(UBI)"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(SPL),256k(SPL.backup1),256k(SPL.backup2),256k(SPL.backup3),1m(u-boot),1m(u-boot.backup1),1m(u-boot-2),1m(u-boot-2.backup1),256k(u-boot-env),256k(u-boot-env.backup1),256k(splash-screen),-(UBI)"
|
||||
CONFIG_CMD_UBI=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_ISO_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
# CONFIG_SPL_OF_CONTROL is not set
|
||||
CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian"
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_BOOTCOUNT_LIMIT=y
|
||||
CONFIG_BOOTCOUNT_ENV=y
|
||||
CONFIG_BOOTCOUNT_AM33XX=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
@ -87,3 +97,5 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
|
||||
CONFIG_USB_ETHER=y
|
||||
CONFIG_SPL_WDT=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
CONFIG_SPL_OF_LIBFDT=y
|
||||
# CONFIG_SPL_USE_TINY_PRINTF is not set
|
||||
|
||||
@ -34,23 +34,49 @@
|
||||
"ramdisk_addr_r=0x88080000\0" \
|
||||
|
||||
#define BOOT_TARGET_DEVICES(func) \
|
||||
func(UBIFS, ubifs, 0) \
|
||||
func(PXE, pxe, na) \
|
||||
func(DHCP, dhcp, na)
|
||||
func(UBIFS, ubifs, 0)
|
||||
|
||||
#define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"
|
||||
|
||||
#include <config_distro_bootcmd.h>
|
||||
|
||||
#define GUARDIAN_DEFAULT_PROD_ENV \
|
||||
"factory_assembly_status=0\0" \
|
||||
"main_pcba_part_number=0\0" \
|
||||
"main_pcba_supplier=0\0" \
|
||||
"main_pcba_timestamp=0\0" \
|
||||
"main_pcba_hardware_version=0\0" \
|
||||
"main_pcba_id=0\0" \
|
||||
"main_pcba_aux_1=0\0" \
|
||||
"main_pcba_aux_2=0\0" \
|
||||
"main_pcba_aux_3=0\0" \
|
||||
"main_pcba_aux_4=0\0" \
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
AM335XX_BOARD_FDTFILE \
|
||||
MEM_LAYOUT_ENV_SETTINGS \
|
||||
BOOTENV \
|
||||
"bootlimit=3\0" \
|
||||
GUARDIAN_DEFAULT_PROD_ENV \
|
||||
"bootubivol=rootfs\0" \
|
||||
"distro_bootcmd=" \
|
||||
"setenv autoload no; " \
|
||||
"setenv rootflags \"bulk_read,chk_data_crc\"; " \
|
||||
"setenv ethact usb_ether; " \
|
||||
"if test \"${swi_status}\" -eq 1; then " \
|
||||
"setenv extrabootargs \"swi_attached\"; " \
|
||||
"if dhcp; then " \
|
||||
"sleep 1; " \
|
||||
"if tftp \"${tftp_load_addr}\" \"bootscript.scr\"; then " \
|
||||
"source \"${tftp_load_addr}\"; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi;" \
|
||||
"run bootcmd_ubifs0;\0" \
|
||||
"altbootcmd=" \
|
||||
"setenv boot_config \"extlinux-rollback.conf\"; " \
|
||||
"run distro_bootcmd\0"
|
||||
"setenv boot_syslinux_conf \"extlinux/extlinux-rollback.conf\"; " \
|
||||
"run distro_bootcmd; " \
|
||||
"setenv boot_syslinux_conf \"extlinux/extlinux.conf\"; " \
|
||||
"run bootcmd_ubifs0;\0"
|
||||
|
||||
#endif /* ! CONFIG_SPL_BUILD */
|
||||
|
||||
@ -109,4 +135,9 @@
|
||||
|
||||
#endif /* CONFIG_MTD_RAW_NAND */
|
||||
|
||||
#define CONFIG_AM335X_USB0
|
||||
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
|
||||
#define CONFIG_AM335X_USB1
|
||||
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
|
||||
|
||||
#endif /* ! __CONFIG_AM335X_GUARDIAN_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user