diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile index 25dad49877..7c8226e6e1 100644 --- a/board/compulab/common/Makefile +++ b/board/compulab/common/Makefile @@ -6,5 +6,4 @@ obj-y += common.o obj-$(CONFIG_$(SPL_)SYS_I2C_LEGACY) += eeprom.o -obj-$(CONFIG_LCD) += omap3_display.o obj-$(CONFIG_SMC911X) += omap3_smc911x.o diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c deleted file mode 100644 index 4ed3b9c00a..0000000000 --- a/board/compulab/common/omap3_display.c +++ /dev/null @@ -1,452 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2012 - 2013 CompuLab, Ltd. - * - * Authors: Nikita Kiryanov - * - * Parsing code based on linux/drivers/video/pxafb.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -enum display_type { - NONE, - DVI, - DVI_CUSTOM, - DATA_IMAGE, /* #define CONFIG_SCF0403_LCD to use */ -}; - -#define CMAP_ADDR 0x80100000 - -/* - * The frame buffer is allocated before we have the chance to parse user input. - * To make sure enough memory is allocated for all resolutions, we define - * vl_{col | row} to the maximal resolution supported by OMAP3. - */ -vidinfo_t panel_info = { - .vl_col = 1400, - .vl_row = 1050, - .vl_bpix = LCD_BPP, - .cmap = (ushort *)CMAP_ADDR, -}; - -static struct panel_config panel_cfg; -static enum display_type lcd_def; - -/* - * A note on DVI presets; - * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can - * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to - * support two BMP types with one setting. - */ -static const struct panel_config preset_dvi_640X480 = { - .lcd_size = PANEL_LCD_SIZE(640, 480), - .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96), - .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2), - .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC, - .divisor = 12 | (1 << 16), - .data_lines = LCD_INTERFACE_24_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -static const struct panel_config preset_dvi_800X600 = { - .lcd_size = PANEL_LCD_SIZE(800, 600), - .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128), - .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4), - .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC, - .divisor = 8 | (1 << 16), - .data_lines = LCD_INTERFACE_24_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -static const struct panel_config preset_dvi_1024X768 = { - .lcd_size = PANEL_LCD_SIZE(1024, 768), - .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136), - .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6), - .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC, - .divisor = 5 | (1 << 16), - .data_lines = LCD_INTERFACE_24_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -static const struct panel_config preset_dvi_1152X864 = { - .lcd_size = PANEL_LCD_SIZE(1152, 864), - .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128), - .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3), - .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC, - .divisor = 4 | (1 << 16), - .data_lines = LCD_INTERFACE_24_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -static const struct panel_config preset_dvi_1280X960 = { - .lcd_size = PANEL_LCD_SIZE(1280, 960), - .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112), - .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3), - .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC, - .divisor = 3 | (1 << 16), - .data_lines = LCD_INTERFACE_24_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -static const struct panel_config preset_dvi_1280X1024 = { - .lcd_size = PANEL_LCD_SIZE(1280, 1024), - .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112), - .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3), - .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC, - .divisor = 3 | (1 << 16), - .data_lines = LCD_INTERFACE_24_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -static const struct panel_config preset_dataimage_480X800 = { - .lcd_size = PANEL_LCD_SIZE(480, 800), - .timing_h = DSS_HBP(2) | DSS_HFP(2) | DSS_HSW(2), - .timing_v = DSS_VBP(17) | DSS_VFP(20) | DSS_VSW(3), - .pol_freq = DSS_IVS | DSS_IHS | DSS_IPC | DSS_ONOFF, - .divisor = 10 | (1 << 10), - .data_lines = LCD_INTERFACE_18_BIT, - .panel_type = ACTIVE_DISPLAY, - .load_mode = 2, - .gfx_format = GFXFORMAT_RGB16, -}; - -/* - * set_resolution_params() - * - * Due to usage of multiple display related APIs resolution data is located in - * more than one place. This function updates them all. - */ -static void set_resolution_params(int x, int y) -{ - panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y); - panel_info.vl_col = x; - panel_info.vl_row = y; - lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; -} - -static void set_preset(const struct panel_config preset, int x_res, int y_res) -{ - panel_cfg = preset; - set_resolution_params(x_res, y_res); -} - -static enum display_type set_dvi_preset(const struct panel_config preset, - int x_res, int y_res) -{ - set_preset(preset, x_res, y_res); - return DVI; -} - -static enum display_type set_dataimage_preset(const struct panel_config preset, - int x_res, int y_res) -{ - set_preset(preset, x_res, y_res); - return DATA_IMAGE; -} - -/* - * parse_mode() - parse the mode parameter of custom lcd settings - * - * @mode: x - * - * Returns -1 on error, 0 on success. - */ -static int parse_mode(const char *mode) -{ - unsigned int modelen = strlen(mode); - int res_specified = 0; - unsigned int xres = 0, yres = 0; - int yres_specified = 0; - int i; - - for (i = modelen - 1; i >= 0; i--) { - switch (mode[i]) { - case 'x': - if (!yres_specified) { - yres = simple_strtoul(&mode[i + 1], NULL, 0); - yres_specified = 1; - } else { - goto done_parsing; - } - - break; - case '0' ... '9': - break; - default: - goto done_parsing; - } - } - - if (i < 0 && yres_specified) { - xres = simple_strtoul(mode, NULL, 0); - res_specified = 1; - } - -done_parsing: - if (res_specified) { - set_resolution_params(xres, yres); - } else { - printf("LCD: invalid mode: %s\n", mode); - return -1; - } - - return 0; -} - -#define PIXEL_CLK_NUMERATOR (26 * 432 / 39) -/* - * parse_pixclock() - Parse the pixclock parameter of custom lcd settings - * - * @pixclock: the desired pixel clock - * - * Returns -1 on error, 0 on success. - * - * Handling the pixel_clock: - * - * Pixel clock is defined in the OMAP35x TRM as follows: - * pixel_clock = - * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) / - * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] * - * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1)) - * - * In practice, this means that in order to set the - * divisor for the desired pixel clock one needs to - * solve the following equation: - * - * 26 * 432 / (39 * ) = DSS.DISPC_DIVISOR[6:0] - * - * NOTE: the explicit equation above is reduced. Do not - * try to infer anything from these numbers. - */ -static int parse_pixclock(char *pixclock) -{ - int divisor, pixclock_val; - char *pixclk_start = pixclock; - - pixclock_val = dectoul(pixclock, &pixclock); - divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val); - /* 0 and 1 are illegal values for PCD */ - if (divisor <= 1) - divisor = 2; - - panel_cfg.divisor = divisor | (1 << 16); - if (pixclock[0] != '\0') { - printf("LCD: invalid value for pixclock:%s\n", pixclk_start); - return -1; - } - - return 0; -} - -/* - * parse_setting() - parse a single setting of custom lcd parameters - * - * @setting: The custom lcd setting : - * - * Returns -1 on failure, 0 on success. - */ -static int parse_setting(char *setting) -{ - int num_val; - char *setting_start = setting; - - if (!strncmp(setting, "mode:", 5)) { - return parse_mode(setting + 5); - } else if (!strncmp(setting, "pixclock:", 9)) { - return parse_pixclock(setting + 9); - } else if (!strncmp(setting, "left:", 5)) { - num_val = simple_strtoul(setting + 5, &setting, 0); - panel_cfg.timing_h |= DSS_HBP(num_val); - } else if (!strncmp(setting, "right:", 6)) { - num_val = simple_strtoul(setting + 6, &setting, 0); - panel_cfg.timing_h |= DSS_HFP(num_val); - } else if (!strncmp(setting, "upper:", 6)) { - num_val = simple_strtoul(setting + 6, &setting, 0); - panel_cfg.timing_v |= DSS_VBP(num_val); - } else if (!strncmp(setting, "lower:", 6)) { - num_val = simple_strtoul(setting + 6, &setting, 0); - panel_cfg.timing_v |= DSS_VFP(num_val); - } else if (!strncmp(setting, "hsynclen:", 9)) { - num_val = simple_strtoul(setting + 9, &setting, 0); - panel_cfg.timing_h |= DSS_HSW(num_val); - } else if (!strncmp(setting, "vsynclen:", 9)) { - num_val = simple_strtoul(setting + 9, &setting, 0); - panel_cfg.timing_v |= DSS_VSW(num_val); - } else if (!strncmp(setting, "hsync:", 6)) { - if (simple_strtoul(setting + 6, &setting, 0) == 0) - panel_cfg.pol_freq |= DSS_IHS; - else - panel_cfg.pol_freq &= ~DSS_IHS; - } else if (!strncmp(setting, "vsync:", 6)) { - if (simple_strtoul(setting + 6, &setting, 0) == 0) - panel_cfg.pol_freq |= DSS_IVS; - else - panel_cfg.pol_freq &= ~DSS_IVS; - } else if (!strncmp(setting, "outputen:", 9)) { - if (simple_strtoul(setting + 9, &setting, 0) == 0) - panel_cfg.pol_freq |= DSS_IEO; - else - panel_cfg.pol_freq &= ~DSS_IEO; - } else if (!strncmp(setting, "pixclockpol:", 12)) { - if (simple_strtoul(setting + 12, &setting, 0) == 0) - panel_cfg.pol_freq |= DSS_IPC; - else - panel_cfg.pol_freq &= ~DSS_IPC; - } else if (!strncmp(setting, "active", 6)) { - panel_cfg.panel_type = ACTIVE_DISPLAY; - return 0; /* Avoid sanity check below */ - } else if (!strncmp(setting, "passive", 7)) { - panel_cfg.panel_type = PASSIVE_DISPLAY; - return 0; /* Avoid sanity check below */ - } else if (!strncmp(setting, "display:", 8)) { - if (!strncmp(setting + 8, "dvi", 3)) { - lcd_def = DVI_CUSTOM; - return 0; /* Avoid sanity check below */ - } - } else { - printf("LCD: unknown option %s\n", setting_start); - return -1; - } - - if (setting[0] != '\0') { - printf("LCD: invalid value for %s\n", setting_start); - return -1; - } - - return 0; -} - -/* - * env_parse_customlcd() - parse custom lcd params from an environment variable. - * - * @custom_lcd_params: The environment variable containing the lcd params. - * - * Returns -1 on failure, 0 on success. - */ -static int parse_customlcd(char *custom_lcd_params) -{ - char params_cpy[160]; - char *setting; - - strncpy(params_cpy, custom_lcd_params, 160); - setting = strtok(params_cpy, ","); - while (setting) { - if (parse_setting(setting) < 0) - return -1; - - setting = strtok(NULL, ","); - } - - /* Currently we don't support changing this via custom lcd params */ - panel_cfg.data_lines = LCD_INTERFACE_24_BIT; - panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */ - - return 0; -} - -/* - * env_parse_displaytype() - parse display type. - * - * Parses the environment variable "displaytype", which contains the - * name of the display type or preset, in which case it applies its - * configurations. - * - * Returns the type of display that was specified. - */ -static enum display_type env_parse_displaytype(char *displaytype) -{ - if (!strncmp(displaytype, "dvi640x480", 10)) - return set_dvi_preset(preset_dvi_640X480, 640, 480); - else if (!strncmp(displaytype, "dvi800x600", 10)) - return set_dvi_preset(preset_dvi_800X600, 800, 600); - else if (!strncmp(displaytype, "dvi1024x768", 11)) - return set_dvi_preset(preset_dvi_1024X768, 1024, 768); - else if (!strncmp(displaytype, "dvi1152x864", 11)) - return set_dvi_preset(preset_dvi_1152X864, 1152, 864); - else if (!strncmp(displaytype, "dvi1280x960", 11)) - return set_dvi_preset(preset_dvi_1280X960, 1280, 960); - else if (!strncmp(displaytype, "dvi1280x1024", 12)) - return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024); - else if (!strncmp(displaytype, "dataimage480x800", 16)) - return set_dataimage_preset(preset_dataimage_480X800, 480, 800); - - return NONE; -} - -void lcd_ctrl_init(void *lcdbase) -{ - struct prcm *prcm = (struct prcm *)PRCM_BASE; - char *custom_lcd; - char *displaytype = env_get("displaytype"); - - if (displaytype == NULL) - return; - - lcd_def = env_parse_displaytype(displaytype); - /* If we did not recognize the preset, check if it's an env variable */ - if (lcd_def == NONE) { - custom_lcd = env_get(displaytype); - if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0) - return; - } - - panel_cfg.frame_buffer = lcdbase; - omap3_dss_panel_config(&panel_cfg); - /* - * Pixel clock is defined with many divisions and only few - * multiplications of the system clock. Since DSS FCLK divisor is set - * to 16 by default, we need to set it to a smaller value, like 3 - * (chosen via trial and error). - */ - clrsetbits_le32(&prcm->clksel_dss, 0xF, 3); -} - -#ifdef CONFIG_SCF0403_LCD -static void scf0403_enable(void) -{ - gpio_direction_output(58, 1); - scf0403_init(157); -} -#else -static inline void scf0403_enable(void) {} -#endif - -void lcd_enable(void) -{ - switch (lcd_def) { - case NONE: - return; - case DVI: - case DVI_CUSTOM: - gpio_direction_output(54, 0); /* Turn on DVI */ - break; - case DATA_IMAGE: - scf0403_enable(); - break; - } - - omap3_dss_enable(); -} - -void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}