leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm: mvebu: Fix moving internal registers

Browse Source 
Commit 5bb2c550b1 ("arm: mvebu: Move internal registers in
arch_very_early_init() function") moved code from file cpu.c to lowlevel.c,
which moves Marvell internal registers from address INTREG_BASE_ADDR_REG to
SOC_REGS_PHY_BASE.

But the steps describing how to do it correctly were documented only in
older U-Boot versions and commit cefd764222 ("arm: mvebu: Fix internal
register config on A38x") probably unintentionally removed important
details about MMU from code comments around.

Commit 5bb2c550b1 ("arm: mvebu: Move internal registers in
arch_very_early_init() function") implemented code movement according to
(now incomplete) comments which resulted in semi-broken code.

The result is that I-cache is currently disabled for all Armada 38x boards
and maybe there are some other (unreported / undetected) issues.

Reimplement it correctly. First flush all caches, then disable MMU and L2
cache and then move Marvell internal registers. There is no need to
explicitly disable I-cache.

After this change lzmadec command with lzma image of 0x7000000 bytes is
doing decompression just 5 seconds. Before this change it was 30 seconds.

To make lowlevel.S code more readable, extend asm/pl310.h header file to be
compatible with assembler and use macros from this file.

Fixes: 5bb2c550b1 ("arm: mvebu: Move internal registers in arch_very_early_init() function")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Pali Rohár 2022-09-08 16:06:54 +02:00 committed by Stefan Roese
parent 4f2333ba88
commit 5818198e6a
3 changed files with 34 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
arch/arm/include/asm/pl310.h
View File

@ -7,13 +7,12 @@
#ifndef _PL310_H_
#define _PL310_H_
#include <linux/types.h>
/* Register bit fields */
#define PL310_AUX_CTRL_ASSOCIATIVITY_MASK (1 << 16)
#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1)
#define L2X0_STNDBY_MODE_EN (1 << 0)
#define L2X0_CTRL_EN 1
#define L2X0_CTRL_OFF 0x100
#define L310_SHARED_ATT_OVERRIDE_ENABLE (1 << 22)
#define L310_AUX_CTRL_DATA_PREFETCH_MASK (1 << 28)
@ -27,6 +26,10 @@
#define L2X0_CACHE_ID_RTL_MASK 0x3f
#define L2X0_CACHE_ID_RTL_R3P2 0x8
#ifndef __ASSEMBLY__
#include <linux/types.h>
struct pl310_regs {
u32 pl310_cache_id;
u32 pl310_cache_type;
@ -87,3 +90,5 @@ void pl310_inval_range(u32 start, u32 end);
void pl310_clean_inval_range(u32 start, u32 end);
#endif
#endif

13
arch/arm/mach-mvebu/cpu.c
View File

@ -445,19 +445,6 @@ static void setup_usb_phys(void)
*/
int arch_cpu_init(void)
{
struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
if (!IS_ENABLED(CONFIG_ARMADA_XP)) {
/*
* To fully release / unlock this area from cache, we need
* to flush all caches and disable the L2 cache.
*/
icache_disable();
dcache_disable();
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
/*
* We need to call mvebu_mbus_probe() before calling
* update_sdram_window_sizes() as it disables all previously

27
arch/arm/mach-mvebu/lowlevel.S
View File

@ -3,6 +3,7 @@
#include <config.h>
#include <linux/linkage.h>
#include <asm/system.h>
#include <asm/pl310.h>
ENTRY(arch_very_early_init)
#ifdef CONFIG_ARMADA_38X
@ -11,10 +12,36 @@ ENTRY(arch_very_early_init)
* register address on Armada 38x. Without this the SDRAM
* located at >= 0x4000.0000 is also not accessible, as its
* still locked to cache.
*
* So to fully release / unlock this area from cache, we need
* to first flush all caches, then disable the MMU and
* disable the L2 cache.
*/
/* Invalidate L1 I/D */
mov r0, #0 @ set up for MCR
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, r0, c7, c5, 0 @ invalidate icache
mcr p15, 0, r0, c7, c5, 6 @ invalidate BP array
mcr p15, 0, r0, c7, c10, 4 @ DSB
mcr p15, 0, r0, c7, c5, 4 @ ISB
/* Disable MMU */
mrc p15, 0, r0, c1, c0, 0
bic r0, #CR_M
mcr p15, 0, r0, c1, c0, 0
/*
* Disable L2 cache
*
* NOTE: Internal registers are still at address INTREG_BASE_ADDR_REG
* but CONFIG_SYS_PL310_BASE is already calculated from base
* address SOC_REGS_PHY_BASE.
*/
ldr r1, =(CONFIG_SYS_PL310_BASE - SOC_REGS_PHY_BASE + INTREG_BASE_ADDR_REG)
ldr r0, [r1, #L2X0_CTRL_OFF]
bic r0, #L2X0_CTRL_EN
str r0, [r1, #L2X0_CTRL_OFF]
#endif
/* Move internal registers from INTREG_BASE_ADDR_REG to SOC_REGS_PHY_BASE */