arm: Remove secomx6quq7 board
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
parent
c6c26a05b8
commit
56124508ce
@ -540,9 +540,6 @@ config TARGET_PCL063_ULL
|
||||
select DM_THERMAL
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_SECOMX6
|
||||
bool "secomx6 boards"
|
||||
|
||||
config TARGET_SOMLABS_VISIONSOM_6ULL
|
||||
bool "visionsom-6ull"
|
||||
depends on MX6ULL
|
||||
@ -718,7 +715,6 @@ source "board/softing/vining_2000/Kconfig"
|
||||
source "board/liebherr/display5/Kconfig"
|
||||
source "board/liebherr/mccmon6/Kconfig"
|
||||
source "board/logicpd/imx6/Kconfig"
|
||||
source "board/seco/Kconfig"
|
||||
source "board/solidrun/mx6cuboxi/Kconfig"
|
||||
source "board/somlabs/visionsom-6ull/Kconfig"
|
||||
source "board/technexion/pico-imx6/Kconfig"
|
||||
|
||||
@ -1,65 +0,0 @@
|
||||
if TARGET_SECOMX6
|
||||
|
||||
choice
|
||||
prompt "SECO i.MX6 Board variant"
|
||||
optional
|
||||
|
||||
config SECOMX6_Q7
|
||||
bool "Q7"
|
||||
|
||||
config SECOMX6_UQ7
|
||||
bool "uQ7"
|
||||
|
||||
config SECOMX6_USBC
|
||||
bool "uSBC"
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "SECO i.MX6 SoC variant"
|
||||
optional
|
||||
|
||||
config SECOMX6Q
|
||||
bool "i.MX6Q"
|
||||
depends on MX6Q
|
||||
|
||||
config SECOMX6DL
|
||||
bool "i.MX6DL"
|
||||
depends on MX6DL
|
||||
|
||||
config SECOMX6S
|
||||
bool "i.MX6S"
|
||||
depends on MX6S
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "DDR size"
|
||||
|
||||
config SECOMX6_512MB
|
||||
bool "512MB"
|
||||
|
||||
config SECOMX6_1GB
|
||||
bool "1GB"
|
||||
|
||||
config SECOMX6_2GB
|
||||
bool "2GB"
|
||||
|
||||
config SECOMX6_4GB
|
||||
bool "4GB"
|
||||
|
||||
endchoice
|
||||
|
||||
config IMX_CONFIG
|
||||
default "board/seco/mx6quq7/mx6quq7-2g.cfg" if SECOMX6_UQ7 && SECOMX6Q && SECOMX6_2GB
|
||||
|
||||
config SYS_BOARD
|
||||
default "mx6quq7" if SECOMX6_UQ7 && SECOMX6Q
|
||||
|
||||
config SYS_VENDOR
|
||||
default "seco"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "secomx6quq7" if SECOMX6_UQ7 && SECOMX6Q
|
||||
|
||||
endif
|
||||
@ -1,3 +0,0 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
obj-$(CONFIG_TARGET_SECOMX6) += mx6.o
|
||||
@ -1,137 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
||||
* Copyright (C) 2015 ECA Sinters
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
* Modified by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
||||
*/
|
||||
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <linux/errno.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/mach-imx/iomux-v3.h>
|
||||
#include <asm/mach-imx/boot_mode.h>
|
||||
#include <mmc.h>
|
||||
#include <fsl_esdhc_imx.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/arch/mxc_hdmi.h>
|
||||
#include <asm/arch/crm_regs.h>
|
||||
#include <linux/fb.h>
|
||||
#include <ipu_pixfmt.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <micrel.h>
|
||||
#include <asm/mach-imx/mxc_i2c.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
||||
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||
|
||||
static iomux_v3_cfg_t const uart2_pads[] = {
|
||||
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
void seco_mx6_setup_uart_iomux(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
|
||||
}
|
||||
|
||||
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
||||
PAD_CTL_SPEED_MED | \
|
||||
PAD_CTL_DSE_40ohm | \
|
||||
PAD_CTL_HYS)
|
||||
|
||||
static iomux_v3_cfg_t const enet_pads[] = {
|
||||
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
};
|
||||
|
||||
void seco_mx6_setup_enet_iomux(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
||||
}
|
||||
|
||||
int seco_mx6_rgmii_rework(struct phy_device *phydev)
|
||||
{
|
||||
/* control data pad skew - devaddr = 0x02, register = 0x04 */
|
||||
ksz9031_phy_extended_write(phydev, 0x02,
|
||||
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
|
||||
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
|
||||
/* rx data pad skew - devaddr = 0x02, register = 0x05 */
|
||||
ksz9031_phy_extended_write(phydev, 0x02,
|
||||
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
|
||||
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
|
||||
/* tx data pad skew - devaddr = 0x02, register = 0x05 */
|
||||
ksz9031_phy_extended_write(phydev, 0x02,
|
||||
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
|
||||
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
|
||||
|
||||
/* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
|
||||
ksz9031_phy_extended_write(phydev, 0x02,
|
||||
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
|
||||
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
||||
PAD_CTL_SPEED_LOW | \
|
||||
PAD_CTL_DSE_80ohm | \
|
||||
PAD_CTL_SRE_FAST | \
|
||||
PAD_CTL_HYS)
|
||||
|
||||
static iomux_v3_cfg_t const usdhc3_pads[] = {
|
||||
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const usdhc4_pads[] = {
|
||||
MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
};
|
||||
|
||||
void seco_mx6_setup_usdhc_iomux(int id)
|
||||
{
|
||||
switch (id) {
|
||||
case 3:
|
||||
imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
|
||||
ARRAY_SIZE(usdhc3_pads));
|
||||
break;
|
||||
|
||||
case 4:
|
||||
imx_iomux_v3_setup_multiple_pads(usdhc4_pads,
|
||||
ARRAY_SIZE(usdhc4_pads));
|
||||
break;
|
||||
|
||||
default:
|
||||
printf("Warning: invalid usdhc id (%d)\n", id);
|
||||
break;
|
||||
}
|
||||
}
|
||||
@ -1,9 +0,0 @@
|
||||
#ifndef __SECO_COMMON_MX6_H
|
||||
#define __SECO_COMMON_MX6_H
|
||||
|
||||
void seco_mx6_setup_uart_iomux(void);
|
||||
void seco_mx6_setup_enet_iomux(void);
|
||||
int seco_mx6_rgmii_rework(struct phy_device *phydev);
|
||||
void seco_mx6_setup_usdhc_iomux(int id);
|
||||
|
||||
#endif /* __SECO_COMMON_MX6_H */
|
||||
@ -1,6 +0,0 @@
|
||||
MX6QUQ7 BOARD
|
||||
M: Boris Brezillon <boris.brezillon@free-electrons.com>
|
||||
S: Maintained
|
||||
F: board/seco/mx6quq7/
|
||||
F: include/configs/secomx6quq7.h
|
||||
F: configs/secomx6quq7_defconfig
|
||||
@ -1,5 +0,0 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# (C) Copyright 2015 ECA Sinters
|
||||
|
||||
obj-y := mx6quq7.o
|
||||
@ -1,172 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 2013 Seco USA Inc
|
||||
*
|
||||
* Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
|
||||
* and create imximage boot image
|
||||
*
|
||||
* The syntax is taken as close as possible with the kwbimage
|
||||
*/
|
||||
|
||||
/* image version */
|
||||
IMAGE_VERSION 2
|
||||
|
||||
/*
|
||||
* Boot Device : one of
|
||||
* spi, sd (the board has no nand neither onenand)
|
||||
*/
|
||||
BOOT_FROM sd
|
||||
|
||||
#define __ASSEMBLY__
|
||||
#include <config.h>
|
||||
#include "asm/arch/mx6-ddr.h"
|
||||
#include "asm/arch/iomux.h"
|
||||
#include "asm/arch/crm_regs.h"
|
||||
|
||||
/* DDR IO TYPE */
|
||||
DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
|
||||
DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
|
||||
|
||||
/* DATA STROBE */
|
||||
DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
|
||||
DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028
|
||||
|
||||
/* DATA */
|
||||
DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
|
||||
DATA 4, MX6_IOM_GRP_B0DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B1DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B2DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B3DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B4DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B5DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B6DS, 0x00000028
|
||||
DATA 4, MX6_IOM_GRP_B7DS, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028
|
||||
/* ADDRESS */
|
||||
DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_CAS, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_RAS, 0x00000028
|
||||
|
||||
/* CONTROL */
|
||||
DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_RESET, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
|
||||
DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028
|
||||
|
||||
/* CLOCK */
|
||||
DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028
|
||||
DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028
|
||||
|
||||
/*
|
||||
* DDR3 SETTINGS
|
||||
* Read Data Bit Delay
|
||||
*/
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
|
||||
|
||||
|
||||
/* Write Leveling */
|
||||
DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F
|
||||
DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
|
||||
DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F0001
|
||||
DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
|
||||
|
||||
/* DQS gating, read delay, write delay calibration values */
|
||||
DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x431A0326
|
||||
DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0323031B
|
||||
DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x433F0340
|
||||
DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0345031C
|
||||
|
||||
/* Read calibration */
|
||||
DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40343137
|
||||
DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x40372F45
|
||||
|
||||
/* write calibration */
|
||||
DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x32414741
|
||||
DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4731473C
|
||||
|
||||
/* Complete calibration by forced measurement: */
|
||||
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
|
||||
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
|
||||
|
||||
/*
|
||||
* MMDC init:
|
||||
* in DDR3, 64-bit mode, only MMDC0 is init
|
||||
*/
|
||||
DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
|
||||
DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
|
||||
|
||||
DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7955
|
||||
DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64
|
||||
DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
|
||||
|
||||
DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
|
||||
DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
|
||||
DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023
|
||||
|
||||
/* CS0_END = 2304MB in step da 256Mb -> [(2304*8/256) - 1] */
|
||||
DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
|
||||
|
||||
/* SDE_1=0; ROW=3; BL=1; DSIZ=2 -> 64 bit */
|
||||
DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
|
||||
|
||||
/* Initialize DDR3 on CS_0 and CS_1 */
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x02088032
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
|
||||
|
||||
/* P0 01c */
|
||||
/* write 0x0940 to MR0 bank_0 (Burst Type=1 (Interlived)) */
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030
|
||||
|
||||
/*ZQ - Calibrationi */
|
||||
DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
|
||||
DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
|
||||
|
||||
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
|
||||
DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
|
||||
|
||||
DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
|
||||
|
||||
DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
|
||||
|
||||
/* set the default clock gate to save power */
|
||||
DATA 4, CCM_CCGR0, 0x00C03F3F
|
||||
DATA 4, CCM_CCGR1, 0x0030FC03
|
||||
DATA 4, CCM_CCGR2, 0x0FFFC000
|
||||
DATA 4, CCM_CCGR3, 0x3FF00000
|
||||
DATA 4, CCM_CCGR4, 0x00FFF300
|
||||
DATA 4, CCM_CCGR5, 0x0F0000C3
|
||||
DATA 4, CCM_CCGR6, 0x000003FF
|
||||
|
||||
/* enable AXI cache for VDOA/VPU/IPU */
|
||||
DATA 4, MX6_IOMUXC_GPR4, 0xF00000FF
|
||||
|
||||
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
|
||||
DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
|
||||
DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
|
||||
|
||||
@ -1,181 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
||||
* Copyright (C) 2015 ECA Sinters
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
* Modified by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
||||
*/
|
||||
|
||||
#include <init.h>
|
||||
#include <net.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/global_data.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/errno.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/mach-imx/iomux-v3.h>
|
||||
#include <asm/mach-imx/boot_mode.h>
|
||||
#include <malloc.h>
|
||||
#include <mmc.h>
|
||||
#include <fsl_esdhc_imx.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/arch/mxc_hdmi.h>
|
||||
#include <asm/arch/crm_regs.h>
|
||||
#include <linux/fb.h>
|
||||
#include <ipu_pixfmt.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/mach-imx/mxc_i2c.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#include "../common/mx6.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
seco_mx6_setup_uart_iomux();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
seco_mx6_rgmii_rework(phydev);
|
||||
if (phydev->drv->config)
|
||||
phydev->drv->config(phydev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_eth_init(struct bd_info *bis)
|
||||
{
|
||||
uint32_t base = IMX_FEC_BASE;
|
||||
struct mii_dev *bus = NULL;
|
||||
struct phy_device *phydev = NULL;
|
||||
int ret = 0;
|
||||
|
||||
seco_mx6_setup_enet_iomux();
|
||||
|
||||
#ifdef CONFIG_FEC_MXC
|
||||
bus = fec_get_miibus(base, -1);
|
||||
if (!bus)
|
||||
return -ENOMEM;
|
||||
|
||||
/* scan phy 4,5,6,7 */
|
||||
phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
|
||||
if (!phydev) {
|
||||
free(bus);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
printf("using phy at %d\n", phydev->addr);
|
||||
ret = fec_probe(bis, -1, base, bus, phydev);
|
||||
if (ret) {
|
||||
free(phydev);
|
||||
free(bus);
|
||||
printf("FEC MXC: %s:failed\n", __func__);
|
||||
}
|
||||
#endif
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define USDHC4_CD_GPIO IMX_GPIO_NR(2, 6)
|
||||
|
||||
static struct fsl_esdhc_cfg usdhc_cfg[2] = {
|
||||
{USDHC3_BASE_ADDR, 0, 4},
|
||||
{USDHC4_BASE_ADDR, 0, 4},
|
||||
};
|
||||
|
||||
int board_mmc_getcd(struct mmc *mmc)
|
||||
{
|
||||
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
||||
int ret = 0;
|
||||
|
||||
switch (cfg->esdhc_base) {
|
||||
case USDHC3_BASE_ADDR:
|
||||
ret = 1; /* Assume eMMC is always present */
|
||||
break;
|
||||
case USDHC4_BASE_ADDR:
|
||||
ret = !gpio_get_value(USDHC4_CD_GPIO);
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int board_mmc_init(struct bd_info *bis)
|
||||
{
|
||||
u32 index = 0;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Following map is done:
|
||||
* (U-Boot device node) (Physical Port)
|
||||
* mmc0 eMMC on Board
|
||||
* mmc1 Ext SD
|
||||
*/
|
||||
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
|
||||
switch (index) {
|
||||
case 0:
|
||||
seco_mx6_setup_usdhc_iomux(3);
|
||||
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
||||
break;
|
||||
case 1:
|
||||
seco_mx6_setup_usdhc_iomux(4);
|
||||
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
|
||||
break;
|
||||
|
||||
default:
|
||||
printf("Warning: %d exceed maximum number of SD ports %d\n",
|
||||
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
|
||||
imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 |
|
||||
MUX_PAD_CTRL(NO_PAD_CTRL));
|
||||
|
||||
gpio_direction_output(IMX_GPIO_NR(2, 4), 0);
|
||||
|
||||
/* Set Low */
|
||||
gpio_set_value(IMX_GPIO_NR(2, 4), 0);
|
||||
udelay(1000);
|
||||
|
||||
/* Set High */
|
||||
gpio_set_value(IMX_GPIO_NR(2, 4), 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: SECO uQ7\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -1,39 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_SYS_TEXT_BASE=0x17800000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x2000
|
||||
CONFIG_ENV_OFFSET=0xC0000
|
||||
CONFIG_MX6Q=y
|
||||
CONFIG_TARGET_SECOMX6=y
|
||||
CONFIG_SECOMX6_UQ7=y
|
||||
CONFIG_SECOMX6Q=y
|
||||
CONFIG_SECOMX6_2GB=y
|
||||
CONFIG_SUPPORT_RAW_INITRD=y
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > "
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_EXT2=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_BOUNCE_BUFFER=y
|
||||
CONFIG_FSL_USDHC=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHY_MICREL=y
|
||||
CONFIG_PHY_MICREL_KSZ90X1=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MXC_UART=y
|
||||
CONFIG_OF_LIBFDT=y
|
||||
@ -1,81 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright (C) 2013 Seco S.r.l
|
||||
*
|
||||
* Configuration settings for the Seco Boards.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include "mx6_common.h"
|
||||
|
||||
#define CONFIG_BOARD_REVISION_TAG
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
||||
|
||||
#define CONFIG_MXC_UART_BASE UART2_BASE
|
||||
|
||||
/* MMC Configuration */
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||
|
||||
/* Ethernet Configuration */
|
||||
#define CONFIG_FEC_MXC
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_XCV_TYPE RGMII
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
#define CONFIG_FEC_MXC_PHYADDR 6
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"ethprime=FEC0\0" \
|
||||
"netdev=eth0\0" \
|
||||
"ethprime=FEC0\0" \
|
||||
"uboot=u-boot.bin\0" \
|
||||
"kernel=uImage\0" \
|
||||
"nfsroot=/opt/eldk/arm\0" \
|
||||
"ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
|
||||
"ip_server=10.0.0.1\0" \
|
||||
"nfs_path=/targetfs \0" \
|
||||
"memory=mem=1024M\0" \
|
||||
"bootdev=mmc dev 0; ext2load mmc 0:1\0" \
|
||||
"root=root=/dev/mmcblk0p1\0" \
|
||||
"option=rootwait rw fixrtc rootflags=barrier=1\0" \
|
||||
"cpu_freq=arm_freq=996\0" \
|
||||
"setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
|
||||
" ${option} ${memory} ${cpu_freq}\0" \
|
||||
"setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
|
||||
" root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
|
||||
" nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
|
||||
" ${memory} ${cpu_freq}\0" \
|
||||
"setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
|
||||
"bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
|
||||
" bootm 0x10800000\0" \
|
||||
"stdin=serial\0" \
|
||||
"stdout=serial\0" \
|
||||
"stderr=serial\0"
|
||||
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* Environment organization */
|
||||
|
||||
#if defined(CONFIG_ENV_IS_IN_MMC)
|
||||
#define CONFIG_DYNAMIC_MMC_DEVNO
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user