board/freescale/mpc8266ads/mpc8266ads.c: CodingStyle cleanup
Make (mostly) checkpatch clean. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Rune Torgersen <runet@innovsys.com>
This commit is contained in:
Wolfgang Denk
parent
f58902d0aa
commit
55e33279ce
@ -1,5 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
* (C) Copyright 2001
|
* (C) Copyright 2001-2011
|
||||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||||
*
|
*
|
||||||
* Modified during 2001 by
|
* Modified during 2001 by
|
||||||
@ -61,8 +61,8 @@
|
|||||||
|
|
||||||
const iop_conf_t iop_conf_tab[4][32] = {
|
const iop_conf_t iop_conf_tab[4][32] = {
|
||||||
|
|
||||||
/* Port A configuration */
|
/* Port A configuration */
|
||||||
{ /* conf ppar psor pdir podr pdat */
|
{ /* conf ppar psor pdir podr pdat */
|
||||||
/* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
|
/* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
|
||||||
/* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
|
/* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
|
||||||
/* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
|
/* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
|
||||||
@ -95,10 +95,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
|
|||||||
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
|
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
|
||||||
/* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
|
/* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
|
||||||
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
|
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
|
||||||
},
|
},
|
||||||
|
|
||||||
/* Port B configuration */
|
/* Port B configuration */
|
||||||
{ /* conf ppar psor pdir podr pdat */
|
{ /* conf ppar psor pdir podr pdat */
|
||||||
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
|
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
|
||||||
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
||||||
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
|
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
|
||||||
@ -131,10 +131,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
|
|||||||
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||||
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||||
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
||||||
},
|
},
|
||||||
|
|
||||||
/* Port C */
|
/* Port C */
|
||||||
{ /* conf ppar psor pdir podr pdat */
|
{ /* conf ppar psor pdir podr pdat */
|
||||||
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
|
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
|
||||||
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
|
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
|
||||||
/* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
|
/* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
|
||||||
@ -167,10 +167,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
|
|||||||
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
|
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
|
||||||
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
|
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
|
||||||
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
|
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
|
||||||
},
|
},
|
||||||
|
|
||||||
/* Port D */
|
/* Port D */
|
||||||
{ /* conf ppar psor pdir podr pdat */
|
{ /* conf ppar psor pdir podr pdat */
|
||||||
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
|
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
|
||||||
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
|
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
|
||||||
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
|
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
|
||||||
@ -203,7 +203,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
|
|||||||
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||||
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||||
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
typedef struct bscr_ {
|
typedef struct bscr_ {
|
||||||
@ -224,317 +224,331 @@ typedef struct pci_ic_s {
|
|||||||
|
|
||||||
void reset_phy(void)
|
void reset_phy(void)
|
||||||
{
|
{
|
||||||
volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
|
volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
|
||||||
|
|
||||||
/* reset the FEC port */
|
/* reset the FEC port */
|
||||||
bcsr->bcsr1 &= ~FETH_RST;
|
bcsr->bcsr1 &= ~FETH_RST;
|
||||||
bcsr->bcsr1 |= FETH_RST;
|
bcsr->bcsr1 |= FETH_RST;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
int board_early_init_f (void)
|
int board_early_init_f(void)
|
||||||
{
|
{
|
||||||
volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
|
volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
|
||||||
volatile pci_ic_t *pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
|
volatile pci_ic_t *pci_ic = (pci_ic_t *)CONFIG_SYS_PCI_INT;
|
||||||
|
|
||||||
bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
|
bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
|
||||||
|
|
||||||
/* mask all PCI interrupts */
|
/* mask all PCI interrupts */
|
||||||
pci_ic->pci_int_mask |= 0xfff00000;
|
pci_ic->pci_int_mask |= 0xfff00000;
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
int checkboard(void)
|
int checkboard(void)
|
||||||
{
|
{
|
||||||
puts ("Board: Motorola MPC8266ADS\n");
|
puts("Board: Motorola MPC8266ADS\n");
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
phys_size_t initdram(int board_type)
|
phys_size_t initdram(int board_type)
|
||||||
{
|
{
|
||||||
/* Autoinit part stolen from board/sacsng/sacsng.c */
|
/* Autoinit part stolen from board/sacsng/sacsng.c */
|
||||||
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
||||||
volatile memctl8260_t *memctl = &immap->im_memctl;
|
volatile memctl8260_t *memctl = &immap->im_memctl;
|
||||||
volatile uchar c = 0xff;
|
volatile uchar c = 0xff;
|
||||||
volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
|
volatile uchar *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
|
||||||
uint psdmr = CONFIG_SYS_PSDMR;
|
uint psdmr = CONFIG_SYS_PSDMR;
|
||||||
int i;
|
int i;
|
||||||
|
|
||||||
uint psrt = 0x21; /* for no SPD */
|
uint psrt = 0x21; /* for no SPD */
|
||||||
uint chipselects = 1; /* for no SPD */
|
uint chipselects = 1; /* for no SPD */
|
||||||
uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
|
uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
|
||||||
uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */
|
uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */
|
||||||
uint data_width;
|
uint data_width;
|
||||||
uint rows;
|
uint rows;
|
||||||
uint banks;
|
uint banks;
|
||||||
uint cols;
|
uint cols;
|
||||||
uint caslatency;
|
uint caslatency;
|
||||||
uint width;
|
uint width;
|
||||||
uint rowst;
|
uint rowst;
|
||||||
uint sdam;
|
uint sdam;
|
||||||
uint bsma;
|
uint bsma;
|
||||||
uint sda10;
|
uint sda10;
|
||||||
u_char spd_size;
|
u_char spd_size;
|
||||||
u_char data;
|
u_char data;
|
||||||
u_char cksum;
|
u_char cksum;
|
||||||
int j;
|
int j;
|
||||||
|
|
||||||
/* Keep the compiler from complaining about potentially uninitialized vars */
|
/*
|
||||||
data_width = rows = banks = cols = caslatency = 0;
|
* Keep the compiler from complaining about
|
||||||
|
* potentially uninitialized vars
|
||||||
|
*/
|
||||||
|
data_width = rows = banks = cols = caslatency = 0;
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Read the SDRAM SPD EEPROM via I2C.
|
* Read the SDRAM SPD EEPROM via I2C.
|
||||||
*/
|
*/
|
||||||
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
||||||
|
|
||||||
i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
|
i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
|
||||||
spd_size = data;
|
spd_size = data;
|
||||||
cksum = data;
|
cksum = data;
|
||||||
for(j = 1; j < 64; j++)
|
for (j = 1; j < 64; j++) { /* read only the checksummed bytes */
|
||||||
{ /* read only the checksummed bytes */
|
/* note: the I2C address autoincrements when alen == 0 */
|
||||||
/* note: the I2C address autoincrements when alen == 0 */
|
|
||||||
i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
|
i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
|
||||||
/*printf("addr %d = 0x%02x\n", j, data);*/
|
/*printf("addr %d = 0x%02x\n", j, data); */
|
||||||
if(j == 5) chipselects = data & 0x0F;
|
if (j == 5)
|
||||||
else if(j == 6) data_width = data;
|
chipselects = data & 0x0F;
|
||||||
else if(j == 7) data_width |= data << 8;
|
else if (j == 6)
|
||||||
else if(j == 3) rows = data & 0x0F;
|
data_width = data;
|
||||||
else if(j == 4) cols = data & 0x0F;
|
else if (j == 7)
|
||||||
else if(j == 12)
|
data_width |= data << 8;
|
||||||
{
|
else if (j == 3)
|
||||||
|
rows = data & 0x0F;
|
||||||
|
else if (j == 4)
|
||||||
|
cols = data & 0x0F;
|
||||||
|
else if (j == 12) {
|
||||||
/*
|
/*
|
||||||
* Refresh rate: this assumes the prescaler is set to
|
* Refresh rate: this assumes the prescaler is set to
|
||||||
* approximately 0.39uSec per tick and the target refresh period
|
* approximately 0.39uSec per tick and the target
|
||||||
* is about 85% of maximum.
|
* refresh period is about 85% of maximum.
|
||||||
*/
|
*/
|
||||||
switch(data & 0x7F)
|
switch (data & 0x7F) {
|
||||||
{
|
default:
|
||||||
default:
|
case 0:
|
||||||
case 0: psrt = 0x21; /* 15.625uS */ break;
|
psrt = 0x21; /* 15.625uS */
|
||||||
case 1: psrt = 0x07; /* 3.9uS */ break;
|
break;
|
||||||
case 2: psrt = 0x0F; /* 7.8uS */ break;
|
case 1:
|
||||||
case 3: psrt = 0x43; /* 31.3uS */ break;
|
psrt = 0x07; /* 3.9uS */
|
||||||
case 4: psrt = 0x87; /* 62.5uS */ break;
|
break;
|
||||||
case 5: psrt = 0xFF; /* 125uS */ break;
|
case 2:
|
||||||
|
psrt = 0x0F; /* 7.8uS */
|
||||||
|
break;
|
||||||
|
case 3:
|
||||||
|
psrt = 0x43; /* 31.3uS */
|
||||||
|
break;
|
||||||
|
case 4:
|
||||||
|
psrt = 0x87; /* 62.5uS */
|
||||||
|
break;
|
||||||
|
case 5:
|
||||||
|
psrt = 0xFF; /* 125uS */
|
||||||
|
break;
|
||||||
}
|
}
|
||||||
}
|
} else if (j == 17)
|
||||||
else if(j == 17) banks = data;
|
banks = data;
|
||||||
else if(j == 18)
|
else if (j == 18) {
|
||||||
{
|
caslatency = 3; /* default CL */
|
||||||
caslatency = 3; /* default CL */
|
#if (PESSIMISTIC_SDRAM)
|
||||||
# if(PESSIMISTIC_SDRAM)
|
if ((data & 0x04) != 0)
|
||||||
if((data & 0x04) != 0) caslatency = 3;
|
caslatency = 3;
|
||||||
else if((data & 0x02) != 0) caslatency = 2;
|
else if ((data & 0x02) != 0)
|
||||||
else if((data & 0x01) != 0) caslatency = 1;
|
caslatency = 2;
|
||||||
# else
|
else if ((data & 0x01) != 0)
|
||||||
if((data & 0x01) != 0) caslatency = 1;
|
caslatency = 1;
|
||||||
else if((data & 0x02) != 0) caslatency = 2;
|
#else
|
||||||
else if((data & 0x04) != 0) caslatency = 3;
|
if ((data & 0x01) != 0)
|
||||||
# endif
|
caslatency = 1;
|
||||||
else
|
else if ((data & 0x02) != 0)
|
||||||
{
|
caslatency = 2;
|
||||||
printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
|
else if ((data & 0x04) != 0)
|
||||||
|
caslatency = 3;
|
||||||
|
#endif
|
||||||
|
else {
|
||||||
|
printf("WARNING: Unknown CAS latency 0x%02X, using 3\n",
|
||||||
data);
|
data);
|
||||||
}
|
}
|
||||||
}
|
} else if (j == 63) {
|
||||||
else if(j == 63)
|
if (data != cksum) {
|
||||||
{
|
printf("WARNING: Configuration data checksum failure:"
|
||||||
if(data != cksum)
|
|
||||||
{
|
|
||||||
printf ("WARNING: Configuration data checksum failure:"
|
|
||||||
" is 0x%02x, calculated 0x%02x\n",
|
" is 0x%02x, calculated 0x%02x\n",
|
||||||
data, cksum);
|
data, cksum);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
cksum += data;
|
cksum += data;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
|
/* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
|
||||||
if(caslatency < 2) {
|
if (caslatency < 2) {
|
||||||
printf("CL was %d, forcing to 2\n", caslatency);
|
printf("CL was %d, forcing to 2\n", caslatency);
|
||||||
caslatency = 2;
|
caslatency = 2;
|
||||||
}
|
}
|
||||||
if(rows > 14) {
|
if (rows > 14) {
|
||||||
printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
|
printf("This doesn't look good, rows = %d, should be <= 14\n",
|
||||||
|
rows);
|
||||||
rows = 14;
|
rows = 14;
|
||||||
}
|
}
|
||||||
if(cols > 11) {
|
if (cols > 11) {
|
||||||
printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
|
printf("This doesn't look good, columns = %d, should be <= 11\n",
|
||||||
|
cols);
|
||||||
cols = 11;
|
cols = 11;
|
||||||
}
|
}
|
||||||
|
|
||||||
if((data_width != 64) && (data_width != 72))
|
if ((data_width != 64) && (data_width != 72)) {
|
||||||
{
|
|
||||||
printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
|
printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
|
||||||
data_width);
|
data_width);
|
||||||
}
|
}
|
||||||
width = 3; /* 2^3 = 8 bytes = 64 bits wide */
|
width = 3; /* 2^3 = 8 bytes = 64 bits wide */
|
||||||
/*
|
/*
|
||||||
* Convert banks into log2(banks)
|
* Convert banks into log2(banks)
|
||||||
*/
|
*/
|
||||||
if (banks == 2) banks = 1;
|
if (banks == 2)
|
||||||
else if(banks == 4) banks = 2;
|
banks = 1;
|
||||||
else if(banks == 8) banks = 3;
|
else if (banks == 4)
|
||||||
|
banks = 2;
|
||||||
|
else if (banks == 8)
|
||||||
|
banks = 3;
|
||||||
|
|
||||||
|
|
||||||
sdram_size = 1 << (rows + cols + banks + width);
|
sdram_size = 1 << (rows + cols + banks + width);
|
||||||
/* hack for high density memory (512MB per CS) */
|
/* hack for high density memory (512MB per CS) */
|
||||||
/* !!!!! Will ONLY work with Page Based Interleave !!!!!
|
/* !!!!! Will ONLY work with Page Based Interleave !!!!!
|
||||||
( PSDMR[PBI] = 1 )
|
( PSDMR[PBI] = 1 )
|
||||||
*/
|
*/
|
||||||
/* mamory actually has 11 column addresses, but the memory controller
|
/*
|
||||||
doesn't really care.
|
* memory actually has 11 column addresses, but the memory
|
||||||
the calculations that follow will however move the rows so that
|
* controller doesn't really care.
|
||||||
they are muxed one bit off if you use 11 bit columns.
|
*
|
||||||
The solution is to tell the memory controller the correct size of the memory
|
* the calculations that follow will however move the rows so
|
||||||
but change the number of columns to 10 afterwards.
|
* that they are muxed one bit off if you use 11 bit columns.
|
||||||
The 11th column addre will still be mucxed correctly onto the bus.
|
*
|
||||||
|
* The solution is to tell the memory controller the correct
|
||||||
|
* size of the memory but change the number of columns to 10
|
||||||
|
* afterwards.
|
||||||
|
*
|
||||||
|
* The 11th column addre will still be mucxed correctly onto
|
||||||
|
* the bus.
|
||||||
|
*
|
||||||
|
* Also be aware that the MPC8266ADS board Rev B has not
|
||||||
|
* connected Row address 13 to anything.
|
||||||
|
*
|
||||||
|
* The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126)
|
||||||
|
*/
|
||||||
|
if (cols > 10)
|
||||||
|
cols = 10;
|
||||||
|
|
||||||
Also be aware that the MPC8266ADS board Rev B has not connected
|
#if (CONFIG_PBI == 0) /* bank-based interleaving */
|
||||||
Row address 13 to anything.
|
rowst = ((32 - 6) - (rows + cols + width)) * 2;
|
||||||
|
|
||||||
The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126)
|
|
||||||
*/
|
|
||||||
if (cols > 10)
|
|
||||||
cols = 10;
|
|
||||||
|
|
||||||
#if(CONFIG_PBI == 0) /* bank-based interleaving */
|
|
||||||
rowst = ((32 - 6) - (rows + cols + width)) * 2;
|
|
||||||
#else
|
#else
|
||||||
rowst = 32 - (rows + banks + cols + width);
|
rowst = 32 - (rows + banks + cols + width);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
or = ~(sdram_size - 1) | /* SDAM address mask */
|
or = ~(sdram_size - 1) | /* SDAM address mask */
|
||||||
((banks-1) << 13) | /* banks per device */
|
((banks - 1) << 13) | /* banks per device */
|
||||||
(rowst << 9) | /* rowst */
|
(rowst << 9) | /* rowst */
|
||||||
((rows - 9) << 6); /* numr */
|
((rows - 9) << 6); /* numr */
|
||||||
|
|
||||||
|
|
||||||
/*printf("memctl->memc_or2 = 0x%08x\n", or);*/
|
/*printf("memctl->memc_or2 = 0x%08x\n", or); */
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* SDAM specifies the number of columns that are multiplexed
|
* SDAM specifies the number of columns that are multiplexed
|
||||||
* (reference AN2165/D), defined to be (columns - 6) for page
|
* (reference AN2165/D), defined to be (columns - 6) for page
|
||||||
* interleave, (columns - 8) for bank interleave.
|
* interleave, (columns - 8) for bank interleave.
|
||||||
*
|
*
|
||||||
* BSMA is 14 - max(rows, cols). The bank select lines come
|
* BSMA is 14 - max(rows, cols). The bank select lines come
|
||||||
* into play above the highest "address" line going into the
|
* into play above the highest "address" line going into the
|
||||||
* the SDRAM.
|
* the SDRAM.
|
||||||
*/
|
*/
|
||||||
#if(CONFIG_PBI == 0) /* bank-based interleaving */
|
#if (CONFIG_PBI == 0) /* bank-based interleaving */
|
||||||
sdam = cols - 8;
|
sdam = cols - 8;
|
||||||
bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
|
bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
|
||||||
sda10 = sdam + 2;
|
sda10 = sdam + 2;
|
||||||
#else
|
#else
|
||||||
sdam = cols + banks - 8;
|
sdam = cols + banks - 8;
|
||||||
bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
|
bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
|
||||||
sda10 = sdam;
|
sda10 = sdam;
|
||||||
#endif
|
#endif
|
||||||
#if(PESSIMISTIC_SDRAM)
|
#if (PESSIMISTIC_SDRAM)
|
||||||
psdmr = (CONFIG_PBI |\
|
psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_16_CLK |
|
||||||
PSDMR_RFEN |\
|
PSDMR_PRETOACT_8W | PSDMR_ACTTORW_8W | PSDMR_WRC_4C |
|
||||||
PSDMR_RFRC_16_CLK |\
|
PSDMR_EAMUX | PSDMR_BUFCMD) | caslatency |
|
||||||
PSDMR_PRETOACT_8W |\
|
((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */
|
||||||
PSDMR_ACTTORW_8W |\
|
(sdam << 24) | (bsma << 21) | (sda10 << 18);
|
||||||
PSDMR_WRC_4C |\
|
|
||||||
PSDMR_EAMUX |\
|
|
||||||
PSDMR_BUFCMD) |\
|
|
||||||
caslatency |\
|
|
||||||
((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
|
|
||||||
(sdam << 24) |\
|
|
||||||
(bsma << 21) |\
|
|
||||||
(sda10 << 18);
|
|
||||||
#else
|
#else
|
||||||
psdmr = (CONFIG_PBI |\
|
psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_7_CLK |
|
||||||
PSDMR_RFEN |\
|
PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */
|
||||||
PSDMR_RFRC_7_CLK |\
|
PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */
|
||||||
PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */ \
|
PSDMR_WRC_1C | /* 1 clock + 7nSec */
|
||||||
PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */ \
|
EAMUX | BUFCMD) | caslatency |
|
||||||
PSDMR_WRC_1C | /* 1 clock + 7nSec */
|
((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */
|
||||||
EAMUX |\
|
(sdam << 24) | (bsma << 21) | (sda10 << 18);
|
||||||
BUFCMD) |\
|
|
||||||
caslatency |\
|
|
||||||
((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
|
|
||||||
(sdam << 24) |\
|
|
||||||
(bsma << 21) |\
|
|
||||||
(sda10 << 18);
|
|
||||||
#endif
|
#endif
|
||||||
/*printf("psdmr = 0x%08x\n", psdmr);*/
|
/*printf("psdmr = 0x%08x\n", psdmr); */
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
|
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
|
||||||
*
|
*
|
||||||
* "At system reset, initialization software must set up the
|
* "At system reset, initialization software must set up the
|
||||||
* programmable parameters in the memory controller banks registers
|
* programmable parameters in the memory controller banks registers
|
||||||
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
|
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
|
||||||
* system software should execute the following initialization sequence
|
* system software should execute the following initialization sequence
|
||||||
* for each SDRAM device.
|
* for each SDRAM device.
|
||||||
*
|
*
|
||||||
* 1. Issue a PRECHARGE-ALL-BANKS command
|
* 1. Issue a PRECHARGE-ALL-BANKS command
|
||||||
* 2. Issue eight CBR REFRESH commands
|
* 2. Issue eight CBR REFRESH commands
|
||||||
* 3. Issue a MODE-SET command to initialize the mode register
|
* 3. Issue a MODE-SET command to initialize the mode register
|
||||||
*
|
*
|
||||||
* Quote from Micron MT48LC8M16A2 data sheet:
|
* Quote from Micron MT48LC8M16A2 data sheet:
|
||||||
*
|
*
|
||||||
* "...the SDRAM requires a 100uS delay prior to issuing any
|
* "...the SDRAM requires a 100uS delay prior to issuing any
|
||||||
* command other than a COMMAND INHIBIT or NOP. Starting at some
|
* command other than a COMMAND INHIBIT or NOP. Starting at some
|
||||||
* point during this 100uS period and continuing at least through
|
* point during this 100uS period and continuing at least through
|
||||||
* the end of this period, COMMAND INHIBIT or NOP commands should
|
* the end of this period, COMMAND INHIBIT or NOP commands should
|
||||||
* be applied."
|
* be applied."
|
||||||
*
|
*
|
||||||
* "Once the 100uS delay has been satisfied with at least one COMMAND
|
* "Once the 100uS delay has been satisfied with at least one COMMAND
|
||||||
* INHIBIT or NOP command having been applied, a /PRECHARGE command/
|
* INHIBIT or NOP command having been applied, a /PRECHARGE command/
|
||||||
* should be applied. All banks must then be precharged, thereby
|
* should be applied. All banks must then be precharged, thereby
|
||||||
* placing the device in the all banks idle state."
|
* placing the device in the all banks idle state."
|
||||||
*
|
*
|
||||||
* "Once in the idle state, /two/ AUTO REFRESH cycles must be
|
* "Once in the idle state, /two/ AUTO REFRESH cycles must be
|
||||||
* performed. After the AUTO REFRESH cycles are complete, the
|
* performed. After the AUTO REFRESH cycles are complete, the
|
||||||
* SDRAM is ready for mode register programming."
|
* SDRAM is ready for mode register programming."
|
||||||
*
|
*
|
||||||
* (/emphasis/ mine, gvb)
|
* (/emphasis/ mine, gvb)
|
||||||
*
|
*
|
||||||
* The way I interpret this, Micron start up sequence is:
|
* The way I interpret this, Micron start up sequence is:
|
||||||
* 1. Issue a PRECHARGE-BANK command (initial precharge)
|
* 1. Issue a PRECHARGE-BANK command (initial precharge)
|
||||||
* 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
|
* 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
|
||||||
* 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
|
* 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
|
||||||
* 4. Issue a MODE-SET command to initialize the mode register
|
* 4. Issue a MODE-SET command to initialize the mode register
|
||||||
*
|
*
|
||||||
* --------
|
* --------
|
||||||
*
|
*
|
||||||
* The initial commands are executed by setting P/LSDMR[OP] and
|
* The initial commands are executed by setting P/LSDMR[OP] and
|
||||||
* accessing the SDRAM with a single-byte transaction."
|
* accessing the SDRAM with a single-byte transaction."
|
||||||
*
|
*
|
||||||
* The appropriate BRx/ORx registers have already been set when we
|
* The appropriate BRx/ORx registers have already been set
|
||||||
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
|
* when we get here. The SDRAM can be accessed at the address
|
||||||
*/
|
* CONFIG_SYS_SDRAM_BASE.
|
||||||
|
*/
|
||||||
|
|
||||||
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
||||||
memctl->memc_psrt = psrt;
|
memctl->memc_psrt = psrt;
|
||||||
|
|
||||||
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
|
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
|
||||||
memctl->memc_or2 = or;
|
memctl->memc_or2 = or;
|
||||||
|
|
||||||
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
|
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
|
||||||
*ramaddr = c;
|
|
||||||
|
|
||||||
memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
|
|
||||||
for (i = 0; i < 8; i++)
|
|
||||||
*ramaddr = c;
|
*ramaddr = c;
|
||||||
|
|
||||||
memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
|
memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
|
||||||
*ramaddr = c;
|
for (i = 0; i < 8; i++)
|
||||||
|
*ramaddr = c;
|
||||||
|
|
||||||
memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
|
memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
|
||||||
*ramaddr = c;
|
*ramaddr = c;
|
||||||
|
|
||||||
/*
|
memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
|
||||||
* Do it a second time for the second set of chips if the DIMM has
|
*ramaddr = c;
|
||||||
* two chip selects (double sided).
|
|
||||||
*/
|
/*
|
||||||
if(chipselects > 1)
|
* Do it a second time for the second set of chips if the DIMM has
|
||||||
{
|
* two chip selects (double sided).
|
||||||
ramaddr += sdram_size;
|
*/
|
||||||
|
if (chipselects > 1) {
|
||||||
|
ramaddr += sdram_size;
|
||||||
|
|
||||||
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
|
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
|
||||||
memctl->memc_or3 = or;
|
memctl->memc_or3 = or;
|
||||||
@ -551,28 +565,28 @@ phys_size_t initdram(int board_type)
|
|||||||
|
|
||||||
memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
|
memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
|
||||||
*ramaddr = c;
|
*ramaddr = c;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* print info */
|
/* print info */
|
||||||
printf("SDRAM configuration read from SPD\n");
|
printf("SDRAM configuration read from SPD\n");
|
||||||
printf("\tSize per side = %dMB\n", sdram_size >> 20);
|
printf("\tSize per side = %dMB\n", sdram_size >> 20);
|
||||||
printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
|
printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n",
|
||||||
|
chipselects, 1 << (banks), cols, rows, data_width);
|
||||||
printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
|
printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
|
||||||
#if(CONFIG_PBI == 0) /* bank-based interleaving */
|
#if (CONFIG_PBI == 0) /* bank-based interleaving */
|
||||||
printf(", Using Bank Based Interleave\n");
|
printf(", Using Bank Based Interleave\n");
|
||||||
#else
|
#else
|
||||||
printf(", Using Page Based Interleave\n");
|
printf(", Using Page Based Interleave\n");
|
||||||
#endif
|
#endif
|
||||||
printf("\tTotal size: ");
|
printf("\tTotal size: ");
|
||||||
|
|
||||||
/* this delay only needed for original 16MB DIMM...
|
/* this delay only needed for original 16MB DIMM...
|
||||||
* Not needed for any other memory configuration */
|
* Not needed for any other memory configuration */
|
||||||
if ((sdram_size * chipselects) == (16 *1024 *1024))
|
if ((sdram_size * chipselects) == (16 * 1024 * 1024))
|
||||||
udelay (250000);
|
udelay(250000);
|
||||||
return (sdram_size * chipselects);
|
|
||||||
/*return (16 * 1024 * 1024);*/
|
|
||||||
}
|
|
||||||
|
|
||||||
|
return sdram_size * chipselects;
|
||||||
|
}
|
||||||
|
|
||||||
#ifdef CONFIG_PCI
|
#ifdef CONFIG_PCI
|
||||||
struct pci_controller hose;
|
struct pci_controller hose;
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user