leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

board: freescale: ls2080a/ls2088a: Enable PPA

Browse Source 
Enable PPA on LS2080A, LS2088A boards:
-LS2080ARDB, LS2080AQDS
-LS2088ARDB, LS2088AQDS

Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
This commit is contained in:
Santan Kumar 2017-03-07 11:21:03 +05:30 committed by York Sun
parent 0aaa1a90b3
commit 54ad7b5ab8
5 changed files with 15 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/cpu/armv8/fsl-layerscape/Kconfig
View File

@ -149,6 +149,7 @@ config SYS_LS_PPA_FW_ADDR
hex "Address of PPA firmware loading from"
depends on FSL_LS_PPA
default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
help
If the PPA firmware locate at XIP flash, such as NOR or

7
board/freescale/ls2080aqds/ls2080aqds.c
View File

@ -19,6 +19,8 @@
#include <asm/arch/soc.h>
#include <hwconfig.h>
#include <fsl_sec.h>
#include <asm/arch/ppa.h>
#include "../common/qixis.h"
#include "ls2080aqds_qixis.h"
@ -224,6 +226,11 @@ int board_init(void)
#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
rtc_enable_32khz_output();
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif

5
board/freescale/ls2080ardb/ls2080ardb.c
View File

@ -19,6 +19,7 @@
#include <i2c.h>
#include <asm/arch/mmu.h>
#include <asm/arch/soc.h>
#include <asm/arch/ppa.h>
#include <fsl_sec.h>
#include "../common/qixis.h"
@ -181,6 +182,10 @@ int board_init(void)
QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
#ifdef CONFIG_FSL_MC_ENET
/* invert AQR405 IRQ pins polarity */
out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK);

1
configs/ls2080aqds_defconfig
View File

@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_LS2080AQDS=y
CONFIG_FSL_LS_PPA=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y

1
configs/ls2080ardb_defconfig
View File

@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_LS2080ARDB=y
CONFIG_FSL_LS_PPA=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y