leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm/km: add mv88e6352 configuration for kmnusa

Browse Source 
The kmnusa board uses a mv88e6352 switch that is connected to the main
eth interface of the kirkwood. Therefore the switch must be configured
so that the kirkwood's egiga eth inferface can be used.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Holger Brunck <holger.brunck@keymile.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
This commit is contained in:
Valentin Longchamp 2012-08-16 23:35:03 +00:00 committed by Prafulla Wadaskar
parent 84fb04b686
commit 52638c4147
1 changed files with 65 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
board/keymile/km_arm/km_arm.c
View File

@ -366,6 +366,71 @@ void reset_phy(void)
/* reset the phy */
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
}
#elif defined(CONFIG_KM_PIGGY4_88E6352)
#include <mv88e6352.h>
#if defined(CONFIG_KM_NUSA)
struct mv88e_sw_reg extsw_conf[] = {
/*
* port 0, PIGGY4, autoneg
* first the fix for the 1000Mbits Autoneg, this is from
* a Marvell errata, the regs are undocumented
*/
{ PHY(0), PHY_PAGE, AN1000FIX_PAGE },
{ PHY(0), PHY_STATUS, AN1000FIX },
{ PHY(0), PHY_PAGE, 0 },
/* now the real port and phy configuration */
{ PORT(0), PORT_PHY, NO_SPEED_FOR },
{ PORT(0), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
{ PHY(0), PHY_1000_CTRL, NO_ADV },
{ PHY(0), PHY_SPEC_CTRL, AUTO_MDIX_EN },
{ PHY(0), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
FULL_DUPLEX },
/* port 1, unused */
{ PORT(1), PORT_CTRL, PORT_DIS },
{ PHY(1), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(1), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 2, unused */
{ PORT(2), PORT_CTRL, PORT_DIS },
{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 3, unused */
{ PORT(3), PORT_CTRL, PORT_DIS },
{ PHY(3), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(3), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 4, ICNEV, SerDes, SGMII */
{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
{ PORT(4), PORT_PHY, SPEED_1000_FOR },
{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
{ PHY(4), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(4), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 5, CPU_RGMII */
{ PORT(5), PORT_PHY, RX_RGMII_TIM | TX_RGMII_TIM | FLOW_CTRL_EN |
FLOW_CTRL_FOR | LINK_VAL | LINK_FOR | FULL_DPX |
FULL_DPX_FOR | SPEED_1000_FOR },
{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/* port 6, unused, this port has no phy */
{ PORT(6), PORT_CTRL, PORT_DIS },
};
#else
struct mv88e_sw_reg extsw_conf[] = {};
#endif
void reset_phy(void)
{
#if defined(CONFIG_KM_MVEXTSW_ADDR)
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
ARRAY_SIZE(extsw_conf));
mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
#endif
}
#else
/* Configure and enable MV88E1118 PHY on the piggy*/
void reset_phy(void)