leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revert "arm: Remove nsa310s board"

Browse Source 
While this platform has not yet been converted, there is active efforts
to do so.  Keep the platform for now.

This reverts commit aa697e6904.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-07-07 22:55:41 -04:00
parent bfb5bfa3c5
commit 4ee73b00ba
9 changed files with 364 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/mach-kirkwood/Kconfig
View File

@ -53,6 +53,9 @@ config TARGET_GOFLEXHOME
config TARGET_NAS220
bool "BlackArmor NAS220"
config TARGET_NSA310S
bool "Zyxel NSA310S"
config TARGET_SBx81LIFKW
bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16"
@ -80,6 +83,7 @@ source "board/raidsonic/ib62x0/Kconfig"
source "board/Seagate/dockstar/Kconfig"
source "board/Seagate/goflexhome/Kconfig"
source "board/Seagate/nas220/Kconfig"
source "board/zyxel/nsa310s/Kconfig"
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"

18
board/zyxel/nsa310s/Kconfig Normal file
View File

@ -0,0 +1,18 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015
# Gerald Kerma <dreagle@doukki.net>
# Tony Dinh <mibodhi@gmail.com>
if TARGET_NSA310S
config SYS_BOARD
default "nsa310s"
config SYS_VENDOR
default "zyxel"
config SYS_CONFIG_NAME
default "nsa310s"
endif

8
board/zyxel/nsa310s/MAINTAINERS Normal file
View File

@ -0,0 +1,8 @@
NSA310S BOARD
M: Gerald Kerma <dreagle@doukki.net>
M: Tony Dinh <mibodhi@gmail.com>
M: Luka Perkov <luka.perkov@sartura.hr>
S: Maintained
F: board/zyxel/nsa310s/
F: include/configs/nsa310s.h
F: configs/nsa310s_defconfig

7
board/zyxel/nsa310s/Makefile Normal file
View File

@ -0,0 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015
# Gerald Kerma <dreagle@doukki.net>
# Tony Dinh <mibodhi@gmail.com>
obj-y := nsa310s.o

41
board/zyxel/nsa310s/kwbimage.cfg Normal file
View File

@ -0,0 +1,41 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015
# Gerald Kerma <dreagle@doukki.net>
# Tony Dinh <mibodhi@gmail.com>
# Refer to doc/README.kwbimage for more details about how-to
# configure and create kirkwood boot images.
#
# Boot Media configurations
BOOT_FROM nand
NAND_ECC_MODE default
NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xFFD100e0 0x1b1b1b9b
DATA 0xFFD01400 0x43010c30
DATA 0xFFD01404 0x39543000
DATA 0xFFD01408 0x22125451
DATA 0xFFD0140C 0x00000833
DATA 0xFFD01410 0x0000000C
DATA 0xFFD01414 0x00000000
DATA 0xFFD01418 0x00000000
DATA 0xFFD0141C 0x00000652
DATA 0xFFD01420 0x00000004
DATA 0xFFD01424 0x0000F17F
DATA 0xFFD01428 0x00085520
DATA 0xFFD0147c 0x00008552
DATA 0xFFD01504 0x0FFFFFF1
DATA 0xFFD01508 0x10000000
DATA 0xFFD0150C 0x00000000
DATA 0xFFD01514 0x00000000
DATA 0xFFD0151C 0x00000000
DATA 0xFFD01494 0x00010000
DATA 0xFFD01498 0x00000000
DATA 0xFFD0149C 0x0000E403
DATA 0xFFD01480 0x00000001
DATA 0xFFD20134 0x66666666
DATA 0xFFD20138 0x66666666
DATA 0x0 0x0

135
board/zyxel/nsa310s/nsa310s.c Normal file
View File

@ -0,0 +1,135 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
*/
#include <common.h>
#include <init.h>
#include <miiphy.h>
#include <net.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include "nsa310s.h"
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/*
* default gpio configuration
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
mvebu_config_gpio(NSA310S_VAL_LOW, NSA310S_VAL_HIGH,
NSA310S_OE_LOW, NSA310S_OE_HIGH);
/* (all LEDs & power off active high) */
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO,
MPP13_GPIO,
MPP14_GPIO,
MPP15_GPIO,
MPP16_GPIO,
MPP17_GPIO,
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_GPIO,
MPP21_GPIO,
MPP22_GPIO,
MPP23_GPIO,
MPP24_GPIO,
MPP25_GPIO,
MPP26_GPIO,
MPP27_GPIO,
MPP28_GPIO,
MPP29_GPIO,
MPP30_GPIO,
MPP31_GPIO,
MPP32_GPIO,
MPP33_GPIO,
MPP34_GPIO,
MPP35_GPIO,
0
};
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
return 0;
}
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
u16 reg;
u16 phyaddr;
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
/* read PHY dev address */
if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
printf("could not read PHY dev address\n");
return;
}
/* set RGMII delay */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL);
miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg);
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
/* reset PHY */
if (miiphy_reset(name, phyaddr))
return;
/*
* ZyXEL NSA310S uses the 88E1310S Alaska (interface identical to 88E1318)
* and has an MCU attached to the LED[2] via tristate interrupt
*/
/* switch to LED register page */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_LED_PG);
/* read out LED polarity register */
miiphy_read(name, phyaddr, MV88E1318_LED_POL_REG, &reg);
/* clear 4, set 5 - LED2 low, tri-state */
reg &= ~(MV88E1318_LED2_4);
reg |= (MV88E1318_LED2_5);
/* write back LED polarity register */
miiphy_write(name, phyaddr, MV88E1318_LED_POL_REG, reg);
/* jump back to page 0, per the PHY chip documenation. */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
/* set PHY back to auto-negotiation mode */
miiphy_write(name, phyaddr, 0x4, 0x1e1);
miiphy_write(name, phyaddr, 0x9, 0x300);
/* downshift */
miiphy_write(name, phyaddr, 0x10, 0x3860);
miiphy_write(name, phyaddr, 0x0, 0x9140);
}
#endif /* CONFIG_RESET_PHY_R */

46
board/zyxel/nsa310s/nsa310s.h Normal file
View File

@ -0,0 +1,46 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
*/
#ifndef __NSA310S_H
#define __NSA310S_H
/* low GPIO's */
#define HDD1_GREEN_LED (1 << 16)
#define HDD1_RED_LED (1 << 13)
#define USB_GREEN_LED (1 << 15)
#define USB_POWER (1 << 21)
#define SYS_GREEN_LED (1 << 28)
#define SYS_ORANGE_LED (1 << 29)
#define COPY_GREEN_LED (1 << 22)
#define COPY_RED_LED (1 << 23)
#define PIN_USB_GREEN_LED 15
#define PIN_USB_POWER 21
#define NSA310S_OE_LOW (~(0))
#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER)
/* high GPIO's */
#define HDD2_GREEN_LED (1 << 2)
#define HDD2_POWER (1 << 1)
#define NSA310S_OE_HIGH (~(0))
#define NSA310S_VAL_HIGH (HDD2_POWER)
/* PHY related */
#define MV88E1318_PGADR_REG 22
#define MV88E1318_MAC_CTRL_PG 2
#define MV88E1318_MAC_CTRL_REG 21
#define MV88E1318_RGMII_TX_CTRL (1 << 4)
#define MV88E1318_RGMII_RX_CTRL (1 << 5)
#define MV88E1318_LED_PG 3
#define MV88E1318_LED_POL_REG 17
#define MV88E1318_LED2_4 (1 << 4)
#define MV88E1318_LED2_5 (1 << 5)
#endif /* __NSA310S_H */

46
configs/nsa310s_defconfig Normal file
View File

@ -0,0 +1,46 @@
CONFIG_ARM=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_NSA310S=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nsa310s => "
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_IDE=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),0x100000@0x100000(second_stage_uboot),-@0x200000(root)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_BZIP2=y
CONFIG_OF_LIBFDT=y

59
include/configs/nsa310s.h Normal file
View File

@ -0,0 +1,59 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
* Luka Perkov <luka.perkov@sartura.hr>
*/
#ifndef _CONFIG_NSA310S_H
#define _CONFIG_NSA310S_H
/* high level configuration options */
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6192 1 /* SOC Name */
#define CONFIG_KW88F6702 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
/* environment variables configuration */
/* default environment variables */
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"ubi part root; " \
"ubifsmount ubi:rootfs; " \
"ubifsload 0x800000 ${kernel}; " \
"ubifsload 0x700000 ${fdt}; " \
"ubifsumount; " \
"fdt addr 0x700000; fdt resize; fdt chosen; " \
"bootz 0x800000 - 0x700000"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS_DEFAULT \
"kernel=/boot/zImage\0" \
"fdt=/boot/nsa310s.dtb\0" \
"bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0"
/* Ethernet driver configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 1
#define CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */
/* SATA driver configuration */
#ifdef CONFIG_IDE
#define __io
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /* CONFIG_IDE */
/* RTC driver configuration */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */
#endif /* _CONFIG_NSA310S_H */