Patch by Josef Wagner, 04 Jun 2004:

- DDR Ram support for PM520 (MPC5200)
- support for different flash types (PM520)
- USB / IDE / CF-Card / DiskOnChip support for PM520
- 8 bit boot rom support for PM520/CE520
- Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
- I2C and RTC support for CPC45
- support of new flash type (28F160C3T) for CPC45

cpu/mc9328/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= serial.o interrupts.o cpu.o 
+OBJS	= serial.o interrupts.o cpu.o
 
 all:	.depend $(START) $(LIB)
 

cpu/mc9328/interrupts.c

@@ -243,8 +243,7 @@ unsigned long long get_ticks(void)
  * This function is derived from PowerPC code (timebase clock frequency).
  * On ARM it returns the number of timer ticks per second.
  */
- 
+
 ulong  get_tbclk (void) {
 	return CFG_HZ;
 }
-

cpu/mc9328/serial.c

@@ -1,6 +1,6 @@
 /*
- * cpu/mc9328/serial.c 
- * 
+ * cpu/mc9328/serial.c
+ *
  * (c) Copyright 2004
  * Techware Information Technology, Inc.
  * http://www.techware.com.tw/
@@ -23,11 +23,10 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
 #include <mc9328.h>
 
-#if defined(CONFIG_UART1) 
+#if defined(CONFIG_UART1)
 /* GPIO PORT B 		*/
 
 #define reg_GIUS	MX1_GIUS_C
@@ -35,7 +34,6 @@
 #define GPIO_MASK	0xFFFFE1FF
 #define UART_BASE	0x00206000
 
-
 #elif defined (CONFIG_UART2)
 /* GPIO PORT C  	*/
 
@@ -44,7 +42,7 @@
 #define GPIO_MASK 	0x0FFFFFFF
 #define UART_BASE	0x207000
 
-#endif 
+#endif
 
 #define reg_URXD	(*((volatile u32 *)(UART_BASE+0x00)))
 #define reg_UTXD	(*((volatile u32 *)(UART_BASE+0x40)))
@@ -64,16 +62,13 @@
 #define TXFE_MASK	0x4000  	/* Tx buffer empty	*/
 #define RDR_MASK	0x0001		/* receive data ready	*/
 
-
 void serial_setbrg (void) {
 
-/* config I/O pins for UART 	*/
-
+	/* config I/O pins for UART 	*/
 	reg_GIUS 	&= GPIO_MASK;
 	reg_GPR		&= GPIO_MASK;
 
-/* config UART			*/
-
+	/* config UART			*/
 	reg_UCR1 	= 5;
 	reg_UCR2 	= 0x4027;
 	reg_UCR4 	= 1;
@@ -84,22 +79,18 @@ void serial_setbrg (void) {
 	reg_UBRC 	= 8;
 }
 
-
-
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
  *
  */
- 
+
 int serial_init (void) {
 	serial_setbrg ();
 
 	return (0);
 }
 
-
-
 /*
  * Read a single byte from the serial port. Returns 1 on success, 0
  * otherwise. When the function is succesfull, the character read is
@@ -112,7 +103,6 @@ int serial_getc (void) {
 	return (u8)reg_URXD;
 }
 
-
 /*
  * Output a single byte to the serial port.
  */
@@ -129,7 +119,6 @@ void serial_putc (const char c) {
 
 }
 
-
 /*
  * Test whether a character is in the RX buffer
  */
@@ -137,10 +126,8 @@ int serial_tstc (void) {
 	return reg_USR2 & RDR_MASK;
 }
 
-
 void serial_puts (const char *s) {
 	while (*s) {
 		serial_putc (*s++);
 	}
 }
-