leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net ppc: fix ethernet device names with spaces

Browse Source 
since commit 1384f3bb8a ethernet names
with spaces drop a

Warning: eth device name has a space!

message. This patch fix it for:

- "FEC ETHERNET" devices found on
  mpc512x, mpc5xxx, mpc8xx and mpc8220 boards.
  renamed to "FEC".
- "SCC ETHERNET" devices found on
  mpc8xx, mpc82xx based boards. Renamed to "SCC".
- "HDLC ETHERNET" devices found on mpc8xx boards
  Renamed to "HDLC"
- "FCC ETHERNET" devices found on mpc8260 and mpc85xx based
  boards. Renamed to "FCC"

Tested on the kup4k board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
This commit is contained in:
Heiko Schocher 2010-07-20 17:45:02 +02:00 committed by Ben Warren
parent f699fe1e1f
commit 48690d8024
34 changed files with 46 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
README
View File

@ -3158,10 +3158,10 @@ List of environment variables (most likely not complete):
interface is currently active. For example you
can do the following
=> setenv ethact FEC ETHERNET
=> ping 192.168.0.1 # traffic sent on FEC ETHERNET
=> setenv ethact SCC ETHERNET
=> ping 10.0.0.1 # traffic sent on SCC ETHERNET
=> setenv ethact FEC
=> ping 192.168.0.1 # traffic sent on FEC
=> setenv ethact SCC
=> ping 10.0.0.1 # traffic sent on SCC
ethrotate - When set to "no" U-Boot does not go through all
available network interfaces.

2
arch/powerpc/cpu/mpc8220/fec.c
View File

@ -840,7 +840,7 @@ int mpc8220_fec_initialize (bd_t * bis)
dev->send = mpc8220_fec_send;
dev->recv = mpc8220_fec_recv;
sprintf (dev->name, "FEC ETHERNET");
sprintf (dev->name, "FEC");
eth_register (dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)

2
arch/powerpc/cpu/mpc8260/ether_fcc.c
View File

@ -383,7 +383,7 @@ int fec_initialize(bd_t *bis)
dev = (struct eth_device*) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
sprintf(dev->name, "FCC%d ETHERNET",
sprintf(dev->name, "FCC%d",
ether_fcc_info[i].ether_index + 1);
dev->priv = &ether_fcc_info[i];
dev->init = fec_init;

2
arch/powerpc/cpu/mpc8260/ether_scc.c
View File

@ -375,7 +375,7 @@ int mpc82xx_scc_enet_initialize(bd_t *bis)
dev = (struct eth_device *) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
sprintf(dev->name, "SCC ETHERNET");
sprintf(dev->name, "SCC");
dev->init = sec_init;
dev->halt = sec_halt;
dev->send = sec_send;

2
arch/powerpc/cpu/mpc85xx/ether_fcc.c
View File

@ -446,7 +446,7 @@ int fec_initialize(bd_t *bis)
dev = (struct eth_device*) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
sprintf(dev->name, "FCC%d ETHERNET",
sprintf(dev->name, "FCC%d",
ether_fcc_info[i].ether_index + 1);
dev->priv = &ether_fcc_info[i];
dev->init = fec_init;

4
arch/powerpc/cpu/mpc8xx/fec.c
View File

@ -164,9 +164,9 @@ int fec_initialize(bd_t *bis)
/* for FEC1 make sure that the name of the interface is the same
as the old one for compatibility reasons */
if (i == 0) {
sprintf (dev->name, "FEC ETHERNET");
sprintf (dev->name, "FEC");
} else {
sprintf (dev->name, "FEC%d ETHERNET",
sprintf (dev->name, "FEC%d",
ether_fcc_info[i].ether_index + 1);
}

2
arch/powerpc/cpu/mpc8xx/scc.c
View File

@ -77,7 +77,7 @@ int scc_initialize(bd_t *bis)
dev = (struct eth_device*) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
sprintf(dev->name, "SCC ETHERNET");
sprintf(dev->name, "SCC");
dev->iobase = 0;
dev->priv = 0;
dev->init = scc_init;

2
board/freescale/mpc8560ads/mpc8560ads.c
View File

@ -236,7 +236,7 @@ void reset_phy (void)
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
miiphy_reset("FCC1 ETHERNET", 0x0);
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);

2
board/funkwerk/vovpn-gw/vovpn-gw.c
View File

@ -198,7 +198,7 @@ void reset_phy (void)
iop->pdat |= 0x00080000;
for (i=0; i<100; i++) {
udelay(20000);
if (bb_miiphy_read("FCC1 ETHERNET", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) {
if (bb_miiphy_read("FCC1", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) {
break;
}
}

4
board/keymile/common/keymile_hdlc_enet.c
View File

@ -40,7 +40,7 @@ extern char keymile_slot; /* our slot number in the backplane */
#define TOUT_LOOP 50000
/*
* Since, except during initialization, ethact is always HDLC ETHERNET
* Since, except during initialization, ethact is always HDLC
* while we're in the driver, just use serial_printf() everywhere for
* output. This avoids possible conflicts when netconsole is being
* used.
@ -124,7 +124,7 @@ int keymile_hdlc_enet_initialize(bd_t *bis)
seth = dev;
#endif
sprintf(dev->name, "HDLC ETHERNET");
sprintf(dev->name, "HDLC");
dev->init = keymile_hdlc_enet_init;
dev->halt = keymile_hdlc_enet_halt;
dev->send = keymile_hdlc_enet_send;

2
board/keymile/km8xx/km8xx_hdlc_enet.c
View File

@ -34,7 +34,7 @@
char keymile_slot; /* our slot number in the backplane */
/*
* Since, except during initialization, ethact is always HDLC ETHERNET
* Since, except during initialization, ethact is always HDLC
* while we're in the driver, just use serial_printf() everywhere for
* output. This avoids possible conflicts when netconsole is being
* used.

4
board/motionpro/motionpro.c
View File

@ -90,8 +90,8 @@ void reset_phy(void)
{
unsigned short mode_control;
miiphy_read("FEC ETHERNET", CONFIG_PHY_ADDR, 0x15, &mode_control);
miiphy_write("FEC ETHERNET", CONFIG_PHY_ADDR, 0x15,
miiphy_read("FEC", CONFIG_PHY_ADDR, 0x15, &mode_control);
miiphy_write("FEC", CONFIG_PHY_ADDR, 0x15,
mode_control & 0xfffe);
return;
}

2
board/sbc8560/sbc8560.c
View File

@ -225,7 +225,7 @@ void reset_phy (void)
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
miiphy_reset("FCC1 ETHERNET", 0x0);
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);

2
board/stx/stxgp3/stxgp3.c
View File

@ -239,7 +239,7 @@ reset_phy(void)
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
miiphy_reset("FCC1 ETHERNET", 0x0);
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);

2
board/stx/stxssa/stxssa.c
View File

@ -238,7 +238,7 @@ reset_phy(void)
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
miiphy_reset("FCC1 ETHERNET", 0x0);
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);

6
board/stx/stxxtc/stxxtc.c
View File

@ -481,12 +481,12 @@ void reset_phys(void)
mii_init();
for (phyno = 0; phyno < 32; ++phyno) {
miiphy_read("FEC ETHERNET", phyno, PHY_PHYIDR1, &v);
miiphy_read("FEC", phyno, PHY_PHYIDR1, &v);
if (v == 0xFFFF)
continue;
miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_POWD);
miiphy_write("FEC", phyno, PHY_BMCR, PHY_BMCR_POWD);
udelay(10000);
miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
miiphy_write("FEC", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
udelay(10000);
}
}

4
board/tqc/tqm8xx/tqm8xx.c
View File

@ -745,13 +745,13 @@ int last_stage_init(void)
return 0;
for (i = 0; i < 2; i++) {
ret = miiphy_read("FEC ETHERNET", phy[i], PHY_BMCR, &reg);
ret = miiphy_read("FEC", phy[i], PHY_BMCR, &reg);
if (ret) {
printf("Cannot read BMCR on PHY %d\n", phy[i]);
return 0;
}
/* Auto-negotiation off, hard set full duplex, 100Mbps */
ret = miiphy_write("FEC ETHERNET", phy[i],
ret = miiphy_write("FEC", phy[i],
PHY_BMCR, (reg | PHY_BMCR_100MB |
PHY_BMCR_DPLX) & ~PHY_BMCR_AUTON);
if (ret) {

4
doc/uImage.FIT/howto.txt
View File

@ -93,7 +93,7 @@ nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1
=> run nfsargs addip
=> tftp 900000 /path/to/tftp/location/kernel.itb
Using FEC ETHERNET device
Using FEC device
TFTP from server 192.168.1.1; our IP address is 192.168.160.5
Filename '/path/to/tftp/location/kernel.itb'.
Load address: 0x900000
@ -207,7 +207,7 @@ inspected and booted:
[on the target system]
=> tftp 900000 /path/to/tftp/location/kernel_fdt.itb
Using FEC ETHERNET device
Using FEC device
TFTP from server 192.168.1.1; our IP address is 192.168.160.5
Filename '/path/to/tftp/location/kernel_fdt.itb'.
Load address: 0x900000

2
drivers/net/mpc512x_fec.c
View File

@ -637,7 +637,7 @@ int mpc512x_fec_initialize (bd_t * bis)
dev->send = mpc512x_fec_send;
dev->recv = mpc512x_fec_recv;
sprintf (dev->name, "FEC ETHERNET");
sprintf (dev->name, "FEC");
eth_register (dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)

1
include/configs/NSCU.h
View File

@ -485,7 +485,6 @@
#undef CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
/* #define CONFIG_ETHPRIME "FEC ETHERNET" */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

6
include/configs/TK885D.h
View File

@ -65,8 +65,8 @@
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"ethprime=FEC ETHERNET\0" \
"ethact=FEC ETHERNET\0" \
"ethprime=FEC\0" \
"ethact=FEC\0" \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
@ -514,7 +514,7 @@
#define CONFIG_MII_INIT 1
#define CONFIG_NET_RETRY_COUNT 3
#define CONFIG_ETHPRIME "FEC ETHERNET"
#define CONFIG_ETHPRIME "FEC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM855L.h
View File

@ -481,7 +481,7 @@
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM855M.h
View File

@ -516,7 +516,7 @@
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM860L.h
View File

@ -480,7 +480,7 @@
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM860M.h
View File

@ -484,7 +484,7 @@
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM862L.h
View File

@ -486,7 +486,7 @@
#define CONFIG_NET_MULTI
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM862M.h
View File

@ -487,7 +487,7 @@
#define CONFIG_NET_MULTI
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM866M.h
View File

@ -506,7 +506,7 @@
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/TQM885D.h
View File

@ -506,7 +506,7 @@
switching to another netwok (if the
tried network is unreachable) */
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1

2
include/configs/ep82xxm.h
View File

@ -147,7 +147,7 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_ENV_IN_OWN_SECT 1
#define CONFIG_AUTO_COMPLETE 1
#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3"
#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */

2
include/configs/idmr.h
View File

@ -74,7 +74,7 @@
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"ethact=FEC ETHERNET\0" \
"ethact=FEC\0 " \
"update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; " \
"cp.b 200000 ff800000 $(filesize);" \
"prot on ff800000 ff81ffff\0" \

4
include/configs/keymile-common.h
View File

@ -139,8 +139,8 @@
#ifdef CONFIG_IO_MUXING
#define CONFIG_KM_DEF_ENV_IOMUX \
"nc=setenv ethact HDLC ETHERNET \0" \
"nce=setenv ethact SCC ETHERNET \0" \
"nc=setenv ethact HDLC \0" \
"nce=setenv ethact SCC \0" \
"stderr=serial,nc \0" \
"stdin=serial,nc \0" \
"stdout=serial,nc \0" \

2
include/configs/km8xx.h
View File

@ -280,7 +280,7 @@
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CONFIG_SCC3_ENET
#define CONFIG_ETHPRIME "SCC ETHERNET"
#define CONFIG_ETHPRIME "SCC"
#define CONFIG_HAS_ETH0
/* pass open firmware flat tree */

2
include/configs/v38b.h
View File

@ -154,7 +154,7 @@
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath) wdt=off\0" \
"hostname=v38b\0" \
"ethact=FEC ETHERNET\0" \
"ethact=FEC\0" \
"rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
"cp.b 200000 ff000000 $(filesize);" \