ARM: dts: da850-lcdk: Sync from Linux 4.16
Sync dts from Linux 4.16 and also add u-boot specific dtsi for OMAPl138 board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Lokesh Vutla
Tom Rini
parent
891ab74b1f
commit
459353d43a
arch/arm/dts
13
arch/arm/dts/da850-lcdk-u-boot.dtsi
Normal file
13
arch/arm/dts/da850-lcdk-u-boot.dtsi
Normal file
@ -0,0 +1,13 @@
|
||||
/*
|
||||
* da850-lcdk U-Boot Additions
|
||||
*
|
||||
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
};
|
||||
};
|
||||
339
arch/arm/dts/da850-lcdk.dts
Normal file
339
arch/arm/dts/da850-lcdk.dts
Normal file
@ -0,0 +1,339 @@
|
||||
/*
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
*
|
||||
* Licensed under GPLv2.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "da850.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "DA850/AM1808/OMAP-L138 LCDK";
|
||||
compatible = "ti,da850-lcdk", "ti,da850";
|
||||
|
||||
aliases {
|
||||
serial2 = &serial2;
|
||||
ethernet0 = ð0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x08000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
dsp_memory_region: dsp-memory@c3000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0xc3000000 0x1000000>;
|
||||
reusable;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "DA850/OMAP-L138 LCDK";
|
||||
simple-audio-card,widgets =
|
||||
"Line", "Line In",
|
||||
"Line", "Line Out";
|
||||
simple-audio-card,routing =
|
||||
"LINE1L", "Line In",
|
||||
"LINE1R", "Line In",
|
||||
"Line Out", "LLOUT",
|
||||
"Line Out", "RLOUT";
|
||||
simple-audio-card,format = "dsp_b";
|
||||
simple-audio-card,bitclock-master = <&link0_codec>;
|
||||
simple-audio-card,frame-master = <&link0_codec>;
|
||||
simple-audio-card,bitclock-inversion;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&mcasp0>;
|
||||
system-clock-frequency = <24576000>;
|
||||
};
|
||||
|
||||
link0_codec: simple-audio-card,codec {
|
||||
sound-dai = <&tlv320aic3106>;
|
||||
system-clock-frequency = <24576000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
user1 {
|
||||
label = "GPIO Key USER1";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "GPIO Key USER2";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
vga-bridge {
|
||||
compatible = "ti,ths8135";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
vga_bridge_in: endpoint {
|
||||
remote-endpoint = <&lcdc_out_vga>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
vga_bridge_out: endpoint {
|
||||
remote-endpoint = <&vga_con_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
ddc-i2c-bus = <&i2c0>;
|
||||
|
||||
port {
|
||||
vga_con_in: endpoint {
|
||||
remote-endpoint = <&vga_bridge_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmx_core {
|
||||
status = "okay";
|
||||
|
||||
mcasp0_pins: pinmux_mcasp0_pins {
|
||||
pinctrl-single,bits = <
|
||||
/* AHCLKX AFSX ACLKX */
|
||||
0x00 0x00101010 0x00f0f0f0
|
||||
/* ARX13 ARX14 */
|
||||
0x04 0x00000110 0x00000ff0
|
||||
>;
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
pinctrl-single,bits = <
|
||||
/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
|
||||
0x1c 0x10110010 0xf0ff00f0
|
||||
/*
|
||||
* EMA_D[0], EMA_D[1], EMA_D[2],
|
||||
* EMA_D[3], EMA_D[4], EMA_D[5],
|
||||
* EMA_D[6], EMA_D[7]
|
||||
*/
|
||||
0x24 0x11111111 0xffffffff
|
||||
/*
|
||||
* EMA_D[8], EMA_D[9], EMA_D[10],
|
||||
* EMA_D[11], EMA_D[12], EMA_D[13],
|
||||
* EMA_D[14], EMA_D[15]
|
||||
*/
|
||||
0x20 0x11111111 0xffffffff
|
||||
/* EMA_A[1], EMA_A[2] */
|
||||
0x30 0x01100000 0x0ff00000
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&serial2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial2_rxtx_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
bus_freq = <2200000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mii_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
max-frequency = <50000000>;
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
|
||||
tlv320aic3106: tlv320aic3106@18 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "ti,tlv320aic3106";
|
||||
reg = <0x18>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&mcasp0 {
|
||||
#sound-dai-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcasp0_pins>;
|
||||
status = "okay";
|
||||
|
||||
op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
|
||||
tdm-slots = <2>;
|
||||
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
||||
0 0 0 0
|
||||
0 0 0 0
|
||||
0 0 0 0
|
||||
0 1 2 0
|
||||
>;
|
||||
tx-num-evt = <32>;
|
||||
rx-num-evt = <32>;
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&aemif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
status = "okay";
|
||||
cs3 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
clock-ranges;
|
||||
ranges;
|
||||
|
||||
ti,cs-chipselect = <3>;
|
||||
|
||||
nand@2000000,0 {
|
||||
compatible = "ti,davinci-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0 0x02000000 0x02000000
|
||||
1 0x00000000 0x00008000>;
|
||||
|
||||
ti,davinci-chipselect = <1>;
|
||||
ti,davinci-mask-ale = <0>;
|
||||
ti,davinci-mask-cle = <0>;
|
||||
ti,davinci-mask-chipsel = <0>;
|
||||
|
||||
ti,davinci-nand-buswidth = <16>;
|
||||
ti,davinci-ecc-mode = "hw";
|
||||
ti,davinci-ecc-bits = <4>;
|
||||
ti,davinci-nand-use-bbt;
|
||||
|
||||
/*
|
||||
* The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
|
||||
* "To boot from NAND Flash, the AIS should be written
|
||||
* to NAND block 1 (NAND block 0 is not used by default)".
|
||||
* The same doc mentions that for ROM "Silicon Revision 2.1",
|
||||
* "Updated NAND boot mode to offer boot from block 0 or block 1".
|
||||
* However the limitaion is left here by default for compatibility
|
||||
* with older silicon and because it needs new boot pin settings
|
||||
* not possible in stock LCDK.
|
||||
*/
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot env";
|
||||
reg = <0 0x020000>;
|
||||
};
|
||||
partition@20000 {
|
||||
/* The LCDK defaults to booting from this partition */
|
||||
label = "u-boot";
|
||||
reg = <0x020000 0x080000>;
|
||||
};
|
||||
partition@a0000 {
|
||||
label = "free space";
|
||||
reg = <0x0a0000 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&prictrl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&memctrl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_pins>;
|
||||
|
||||
port {
|
||||
lcdc_out_vga: endpoint {
|
||||
remote-endpoint = <&vga_bridge_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vpif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vpif_capture_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsp {
|
||||
memory-region = <&dsp_memory_region>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -23,11 +23,18 @@
|
||||
reg = <0xfffee000 0x2000>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
spi0 = &spi0;
|
||||
dsp: dsp@11800000 {
|
||||
compatible = "ti,da850-dsp";
|
||||
reg = <0x11800000 0x40000>,
|
||||
<0x11e00000 0x8000>,
|
||||
<0x11f00000 0x8000>,
|
||||
<0x01c14044 0x4>,
|
||||
<0x01c14174 0x8>;
|
||||
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <28>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@1c00000 {
|
||||
compatible = "simple-bus";
|
||||
model = "da850";
|
||||
|
||||
Loading…
Reference in New Issue
Block a user