Nokia RX-51: Add booting from UBI into test script
Compile U-Boot with UBI/UBIFS support according to doc/board/nokia/rx51.rst instructions and add test case for loading kernel image from UBI volume. Signed-off-by: Pali Rohár <pali@kernel.org>
This commit is contained in:
Pali Rohár
Tom Rini
parent
21dc5efbf4
commit
43f7b81f9d
@ -34,7 +34,18 @@ echo "========== Compiling U-Boot for Nokia RX-51 board =========="
|
||||
echo "============================================================"
|
||||
echo
|
||||
|
||||
# First compile u-boot.bin binary for Nokia RX-51 board
|
||||
# First compile u-boot-ubifs.bin binary with UBI/UBIFS support for Nokia RX-51 board according to doc/board/nokia/rx51.rst
|
||||
make nokia_rx51_config
|
||||
cat >> .config << EOF
|
||||
CONFIG_CMD_UBI=y
|
||||
CONFIG_CMD_UBIFS=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=10
|
||||
EOF
|
||||
make olddefconfig
|
||||
make -j4 u-boot.bin CROSS_COMPILE=arm-linux-gnueabi-
|
||||
mv u-boot.bin u-boot-ubifs.bin
|
||||
|
||||
# Then compile standard u-boot.bin binary for Nokia RX-51 board
|
||||
make nokia_rx51_config
|
||||
make -j4 u-boot.bin CROSS_COMPILE=arm-linux-gnueabi-
|
||||
|
||||
@ -44,6 +55,7 @@ cd nokia_rx51_tmp
|
||||
|
||||
test -f mkimage || ln -s ../tools/mkimage .
|
||||
test -f u-boot.bin || ln -s ../u-boot.bin .
|
||||
test -f u-boot-ubifs.bin || ln -s ../u-boot-ubifs.bin .
|
||||
|
||||
echo
|
||||
echo "=========================================================================="
|
||||
@ -99,6 +111,10 @@ echo "========== Generating images =========="
|
||||
echo "======================================="
|
||||
echo
|
||||
|
||||
# Generate kernel image in zImage and uImage format from FIASCO format
|
||||
dd if=kernel_2.6.28/boot/zImage-2.6.28-20103103+0m5.fiasco of=zImage-2.6.28-omap1 skip=95 bs=1
|
||||
./mkimage -A arm -O linux -T kernel -C none -a 80008000 -e 80008000 -n zImage-2.6.28-omap1 -d zImage-2.6.28-omap1 uImage-2.6.28-omap1
|
||||
|
||||
# Generate rootfs directory
|
||||
mkdir -p rootfs
|
||||
mkdir -p rootfs/dev/
|
||||
@ -123,20 +139,7 @@ echo
|
||||
EOF
|
||||
chmod +x rootfs/sbin/preinit
|
||||
|
||||
# Generate ubi config file for ubi rootfs image
|
||||
cat > ubi.ini << EOF
|
||||
[rootfs]
|
||||
mode=ubi
|
||||
image=ubifs.img
|
||||
vol_id=0
|
||||
vol_size=230MiB # 1870 LEBs
|
||||
vol_type=dynamic
|
||||
vol_name=rootfs
|
||||
vol_alignment=1
|
||||
vol_flags=autoresize
|
||||
EOF
|
||||
|
||||
# Generate ubi rootfs image from rootfs directory
|
||||
# Generate ubifs image from rootfs directory
|
||||
# NOTE: Character device on host filesystem can be created only by root
|
||||
# But we do not need it on host filesystem, just in ubifs image
|
||||
# So run mknod and mkfs.ubifs commands under fakeroot program
|
||||
@ -149,8 +152,35 @@ fakeroot sh -c '
|
||||
mknod rootfs/dev/console c 5 1;
|
||||
/usr/sbin/mkfs.ubifs -m 2048 -e 129024 -c 2047 -r rootfs ubifs.img;
|
||||
'
|
||||
|
||||
# Generate ubi image with rootfs on first volume
|
||||
cat > ubi.ini << EOF
|
||||
[rootfs]
|
||||
mode=ubi
|
||||
image=ubifs.img
|
||||
vol_id=0
|
||||
vol_size=230MiB # 1870 LEBs
|
||||
vol_type=dynamic
|
||||
vol_name=rootfs
|
||||
vol_alignment=1
|
||||
vol_flags=autoresize
|
||||
EOF
|
||||
/usr/sbin/ubinize -o ubi.img -p 128KiB -m 2048 -s 512 ubi.ini
|
||||
|
||||
# Generate ubi image with rootfs on first volume and kernel in zImage format on second volume for UBI booting
|
||||
cp ubi.ini ubi_with_kernel.ini
|
||||
cat >> ubi_with_kernel.ini << EOF
|
||||
[kernel]
|
||||
mode=ubi
|
||||
image=zImage-2.6.28-omap1
|
||||
vol_id=1
|
||||
vol_size=2MiB
|
||||
vol_type=dynamic
|
||||
vol_name=kernel
|
||||
vol_alignment=1
|
||||
EOF
|
||||
/usr/sbin/ubinize -o ubi_with_kernel.img -p 128KiB -m 2048 -s 512 ubi_with_kernel.ini
|
||||
|
||||
# Generate bootmenu for U-Boot serial console testing
|
||||
cat > bootmenu_uboot << EOF
|
||||
setenv bootmenu_0 'Serial console test=echo; echo "Testing serial console"; echo; echo "Successfully booted"; echo; poweroff';
|
||||
@ -187,6 +217,15 @@ setenv bootdelay 1;
|
||||
EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_nand -d bootmenu_nand bootmenu_nand.scr
|
||||
|
||||
# Generate bootmenu for UBI booting (zImage)
|
||||
cat > bootmenu_ubi << EOF
|
||||
setenv bootmenu_0 'zImage-2.6.28-omap1 from UBI=setenv bootargs; setenv setup_omap_atag 1; ubi part rootfs && ubi read \${kernaddr} kernel && bootz \${kernaddr}';
|
||||
setenv bootmenu_1;
|
||||
setenv bootmenu_delay 1;
|
||||
setenv bootdelay 1;
|
||||
EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_ubi -d bootmenu_ubi bootmenu_ubi.scr
|
||||
|
||||
# Generate bootmenu for default booting
|
||||
cat > bootmenu_default << EOF
|
||||
setenv bootmenu_delay 1;
|
||||
@ -195,9 +234,7 @@ EOF
|
||||
./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_default -d bootmenu_default bootmenu_default.scr
|
||||
|
||||
# Generate combined image from u-boot and Maemo fiasco kernel
|
||||
dd if=kernel_2.6.28/boot/zImage-2.6.28-20103103+0m5.fiasco of=zImage-2.6.28-omap1 skip=95 bs=1
|
||||
./u-boot-gen-combined u-boot.bin zImage-2.6.28-omap1 combined_zimage.bin
|
||||
./mkimage -A arm -O linux -T kernel -C none -a 80008000 -e 80008000 -n zImage-2.6.28-omap1 -d zImage-2.6.28-omap1 uImage-2.6.28-omap1
|
||||
./u-boot-gen-combined u-boot.bin uImage-2.6.28-omap1 combined_uimage.bin
|
||||
|
||||
# Generate combined hack image from u-boot and Maemo fiasco kernel (kernel starts at 2MB offset and qflasher puts 2kB header before supplied image)
|
||||
@ -226,6 +263,11 @@ truncate -s 50MiB emmc_nand.img
|
||||
mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_nand.img
|
||||
mcopy bootmenu_nand.scr ::/bootmenu.scr -i emmc_nand.img
|
||||
|
||||
# Generate FAT32 eMMC image for UBI booting (zImage)
|
||||
truncate -s 50MiB emmc_ubi.img
|
||||
mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_ubi.img
|
||||
mcopy bootmenu_ubi.scr ::/bootmenu.scr -i emmc_ubi.img
|
||||
|
||||
# Generate FAT32 eMMC image for default booting
|
||||
truncate -s 50MiB emmc_default.img
|
||||
mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_default.img
|
||||
@ -251,6 +293,10 @@ rm -f mtd_emmc.img
|
||||
rm -f mtd_nand.img
|
||||
./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k combined_hack.bin -r ubi.img -m rx51 -p k=4094,i=2 -o mtd_nand.img
|
||||
|
||||
# Generate MTD image for UBI booting from bootloader nolo images, u-boot image with UBI/UBIFS support and rootfs image with kernel volume
|
||||
rm -f mtd_ubi.img
|
||||
./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k u-boot-ubifs.bin -r ubi_with_kernel.img -m rx51 -o mtd_ubi.img
|
||||
|
||||
echo
|
||||
echo "======================================================"
|
||||
echo "========== Running test images in n900 qemu =========="
|
||||
@ -329,6 +375,18 @@ wait -n $sleep_pid $qemu_pid || true
|
||||
kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true
|
||||
wait || true
|
||||
|
||||
# Run MTD image in qemu and wait for 300s if kernel from UBI is correctly booted
|
||||
rm -f qemu_ubi.log
|
||||
./qemu-system-arm -M n900 -mtdblock mtd_ubi.img -sd emmc_ubi.img -serial /dev/stdout -display none > qemu_ubi.log &
|
||||
qemu_pid=$!
|
||||
tail -F qemu_ubi.log &
|
||||
tail_pid=$!
|
||||
sleep 300 &
|
||||
sleep_pid=$!
|
||||
wait -n $sleep_pid $qemu_pid || true
|
||||
kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true
|
||||
wait || true
|
||||
|
||||
echo
|
||||
echo "============================="
|
||||
echo "========== Results =========="
|
||||
@ -341,10 +399,11 @@ if grep -q 'Successfully booted' qemu_ram2.log; then echo "Kernel (zImage) was s
|
||||
if grep -q 'Successfully booted' qemu_emmc.log; then echo "Kernel (uImage) was successfully booted from eMMC"; else echo "Failed to boot kernel (uImage) from eMMC"; fi
|
||||
if grep -q 'Successfully booted' qemu_emmc2.log; then echo "Kernel (zImage) was successfully booted from eMMC"; else echo "Failed to boot kernel (zImage) from eMMC"; fi
|
||||
if grep -q 'Successfully booted' qemu_nand.log; then echo "Kernel (uImage) was successfully booted from OneNAND"; else echo "Failed to boot kernel (uImage) from OneNAND"; fi
|
||||
if grep -q 'Successfully booted' qemu_ubi.log; then echo "Kernel (zImage) was successfully booted from UBI"; else echo "Failed to boot kernel (zImage) from UBI"; fi
|
||||
|
||||
echo
|
||||
|
||||
if grep -q 'Successfully booted' qemu_uboot.log && grep -q 'Successfully booted' qemu_ram.log && grep -q 'Successfully booted' qemu_ram2.log && grep -q 'Successfully booted' qemu_emmc.log && grep -q 'Successfully booted' qemu_emmc2.log && grep -q 'Successfully booted' qemu_nand.log; then
|
||||
if grep -q 'Successfully booted' qemu_uboot.log && grep -q 'Successfully booted' qemu_ram.log && grep -q 'Successfully booted' qemu_ram2.log && grep -q 'Successfully booted' qemu_emmc.log && grep -q 'Successfully booted' qemu_emmc2.log && grep -q 'Successfully booted' qemu_nand.log && grep -q 'Successfully booted' qemu_ubi.log; then
|
||||
echo "All tests passed"
|
||||
exit 0
|
||||
else
|
||||
|
||||
Loading…
Reference in New Issue
Block a user