leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mx7d: Add Storopack's SMEGW01 board

Browse Source 
Add support for Storopack's SMEGW01 board, which is an
IoT gateway based on the i.MX7D SoC.

Based on the original U-Boot work done by Phytec.

Signed-off-by: Fabio Estevam <festevam@denx.de>
This commit is contained in:
Fabio Estevam 2021-05-28 10:26:57 -03:00 committed by Stefano Babic
parent d4f15ecd47
commit 40496ac3b7
10 changed files with 545 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/dts/Makefile
View File

@ -834,8 +834,8 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
imx7s-warp.dtb \
imx7d-meerkat96.dtb \
imx7d-pico-pi.dtb \
imx7d-pico-hobbit.dtb
imx7d-pico-hobbit.dtb \
imx7d-smegw01.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \
imx7ulp-evk.dtb

190
arch/arm/dts/imx7d-smegw01.dts Normal file
View File

@ -0,0 +1,190 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
//
// Copyright (C) 2020 PHYTEC Messtechnik GmbH
// Author: Jens Lang <J.Lang@phytec.de>
// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
/dts-v1/;
#include "imx7d.dtsi"
/ {
model = "Storopack SMEGW01 board";
compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
aliases {
mmc0 = &usdhc1;
mmc1 = &usdhc3;
};
chosen {
stdout-path = &uart1;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
no-1-8-v;
enable-sdio-wakeup;
keep-power-in-suspend;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
max-frequency = <200000000>;
bus-width = <8>;
fsl,tuning-step = <1>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
cap-mmc-hw-reset;
mmc-hs200-1_8v;
mmc-ddr-1_8v;
sd-uhs-ddr50;
sd-uhs-sdr104;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c
>;
};
pinctrl_usdhc1: usdhc1 {
fsl,pins = <
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
>;
};
pinctrl_usdhc3: usdhc3 {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5d
MX7D_PAD_SD3_CLK__SD3_CLK 0x1d
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d
>;
};
pinctrl_usdhc3_100mhz: usdhc3_100mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5e
MX7D_PAD_SD3_CLK__SD3_CLK 0x1e
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e
>;
};
pinctrl_usdhc3_200mhz: usdhc3_200mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5f
MX7D_PAD_SD3_CLK__SD3_CLK 0x0f
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f
>;
};
};
&iomuxc_lpsr {
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
>;
};
};

9
arch/arm/mach-imx/mx7/Kconfig
View File

@ -70,6 +70,14 @@ config TARGET_PICO_IMX7D
select SUPPORT_SPL
imply CMD_DM
config TARGET_SMEGW01
bool "smegw01"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX7D
imply CMD_DM
config TARGET_WARP7
bool "warp7"
select BOARD_LATE_INIT
@ -94,6 +102,7 @@ source "board/compulab/cl-som-imx7/Kconfig"
source "board/ronetix/imx7-cm/Kconfig"
source "board/freescale/mx7dsabresd/Kconfig"
source "board/novtech/meerkat96/Kconfig"
source "board/storopack/smegw01/Kconfig"
source "board/technexion/pico-imx7d/Kconfig"
source "board/toradex/colibri_imx7/Kconfig"
source "board/warp7/Kconfig"

12
board/storopack/smegw01/Kconfig Normal file
View File

@ -0,0 +1,12 @@
if TARGET_SMEGW01
config SYS_BOARD
default "smegw01"
config SYS_VENDOR
default "storopack"
config SYS_CONFIG_NAME
default "smegw01"
endif

7
board/storopack/smegw01/MAINTAINERS Normal file
View File

@ -0,0 +1,7 @@
SMEGW01 BOARD
M: Fabio Estevam <festevam@denx.de>
S: Maintained
F: board/storopack/
F: arch/arm/dts/imx7d-smegw01.dts
F: configs/smegw01_defconfig
F: include/configs/smegw01.h

4
board/storopack/smegw01/Makefile Normal file
View File

@ -0,0 +1,4 @@
# SPDX-License-Identifier: GPL-2.0+
# (C) Copyright 2016 NXP Semiconductors
obj-y := smegw01.o

100
board/storopack/smegw01/imximage.cfg Normal file
View File

@ -0,0 +1,100 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2017 PHYTEC America, LLC
*
* Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
#define __ASSEMBLY__
#include <config.h>
IMAGE_VERSION 2
#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
BOOT_FROM sd
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* DDR initialization came from Phytec */
DATA 4 0x30340004 0x4F400005
DATA 4 0x30360388 0x40000000
DATA 4 0x30360384 0x40000000
DATA 4 0x30391000 0x00000002
DATA 4 0x307a0000 0x01040001
DATA 4 0x307a01a0 0x80400003
DATA 4 0x307a01a4 0x00100020
DATA 4 0x307a01a8 0x80100004
DATA 4 0x307a0064 0x0040002b
DATA 4 0x307a0490 0x00000001
DATA 4 0x307a00d0 0x00020083
DATA 4 0x307a00d4 0x00690000
DATA 4 0x307a00dc 0x09300004
DATA 4 0x307a00e0 0x04080000
DATA 4 0x307a00e4 0x00100004
DATA 4 0x307a00f4 0x0000033f
DATA 4 0x307a0100 0x090b1109
DATA 4 0x307a0104 0x0007020d
DATA 4 0x307a0108 0x03040407
DATA 4 0x307a010c 0x00002006
DATA 4 0x307a0110 0x04020205
DATA 4 0x307a0114 0x03030202
DATA 4 0x307a0120 0x00000802
DATA 4 0x307a0180 0x00800020
DATA 4 0x307a0184 0x02000100
DATA 4 0x307a0190 0x02098204
DATA 4 0x307a0194 0x00030303
DATA 4 0x307a0200 0x00001f15
DATA 4 0x307a0204 0x00080808
DATA 4 0x307a0210 0x00000f0f
DATA 4 0x307a0214 0x07070707
DATA 4 0x307a0218 0x0f0f0707
DATA 4 0x307a0240 0x06000604
DATA 4 0x307a0244 0x00000001
DATA 4 0x30391000 0x00000000
DATA 4 0x30790000 0x17420f40
DATA 4 0x30790004 0x10210100
DATA 4 0x30790010 0x00060807
DATA 4 0x307900b0 0x1010007e
DATA 4 0x3079009c 0x00000d6e
DATA 4 0x30790020 0x0a0a0a0a
DATA 4 0x30790030 0x06060606
DATA 4 0x30790050 0x01000010
DATA 4 0x30790050 0x00000010
DATA 4 0x307900c0 0x0e407304
DATA 4 0x307900c0 0x0e447304
DATA 4 0x307900c0 0x0e447306
CHECK_BITS_SET 4 0x307900c4 0x1
DATA 4 0x307900c0 0x0e447304
DATA 4 0x307900c0 0x0e407304
DATA 4 0x30384130 0x00000000
DATA 4 0x30340020 0x00000178
DATA 4 0x30384130 0x00000002
DATA 4 0x30790018 0x0000000f
CHECK_BITS_SET 4 0x307a0004 0x1

95
board/storopack/smegw01/smegw01.c Normal file
View File

@ -0,0 +1,95 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
#include <init.h>
#include <net.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx7-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/mach-imx/hab.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
#include <common.h>
#include <env.h>
#include <asm/arch/crm_regs.h>
#include <asm/setup.h>
#include <asm/bootm.h>
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \
PAD_CTL_HYS)
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_SIZE;
return 0;
}
static iomux_v3_cfg_t const wdog_pads[] = {
MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t const uart1_pads[] = {
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
};
static int setup_fec(void)
{
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
int ret;
/* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/
clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
ret = set_clk_enet(ENET_125MHZ);
if (ret)
return ret;
return 0;
}
int board_early_init_f(void)
{
setup_iomux_uart();
setup_fec();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
return 0;
}
int board_late_init(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
/*
* Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
* since we use PMIC_PWRON to reset the board.
*/
clrsetbits_le16(&wdog->wcr, 0, 0x10);
return 0;
}

63
configs/smegw01_defconfig Normal file
View File

@ -0,0 +1,63 @@
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0xa0000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
CONFIG_DM_GPIO=y
CONFIG_TARGET_SMEGW01=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-smegw01"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/storopack/smegw01/imximage.cfg"
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_DFU_MMC=y
CONFIG_DM_I2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y

63
include/configs/smegw01.h Normal file
View File

@ -0,0 +1,63 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 NXP Semiconductors
* Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
*
* Configuration settings for the smegw01 board.
*/
#ifndef __SMEGW01_CONFIG_H
#define __SMEGW01_CONFIG_H
#include "mx7_common.h"
#include <imximage.h>
#define PHYS_SDRAM_SIZE SZ_512M
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"image=zImage\0" \
"console=ttymxc0\0" \
"fdtfile=imx7d-smegw01.dtb\0" \
"fdt_addr=0x83000000\0" \
"bootm_size=0x10000000\0" \
"mmcdev=0\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"fi;\0" \
#define CONFIG_BOOTCOMMAND \
"if run loadimage; then " \
"run mmcboot; " \
"fi; " \
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#endif