diff --git a/Kconfig b/Kconfig index b0e45cd236..acf146c1a2 100644 --- a/Kconfig +++ b/Kconfig @@ -246,9 +246,10 @@ config SYS_MALLOC_F_LEN config SYS_MALLOC_LEN hex "Define memory for Dynamic allocation" default 0x2000000 if ARCH_ROCKCHIP || ARCH_OMAP2PLUS || ARCH_MESON - default 0x4020000 if ARCH_SUNXI && !MACH_SUN8I_V3S default 0x200000 if ARCH_BMIPS || X86 - default 0x220000 if ARCH_SUNXI && MACH_SUN8I_V3S + default 0x120000 if MACH_SUNIV + default 0x220000 if MACH_SUN8I_V3S + default 0x4020000 if ARCH_SUNXI default 0x400000 help This defines memory to be allocated for Dynamic allocation @@ -391,8 +392,9 @@ config SYS_LOAD_ADDR hex "Address in memory to use by default" default 0x01000000 if ARCH_SOCFPGA default 0x02000000 if PPC || X86 + default 0x81000000 if MACH_SUNIV default 0x22000000 if MACH_SUN9I - default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I + default 0x42000000 if ARCH_SUNXI default 0x82000000 if ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 default 0x82000000 if ARCH_MX6 && (MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL) default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index eb0f5bcfe5..9a62b55786 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -452,9 +452,6 @@ config ENABLE_ARM_SOC_BOOT0_HOOK values, then choose this option, and create a file included as which contains the required assembler code. -config ARM_CORTEX_CPU_IS_UP - bool - config USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy" default y if !ARM64 diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index b901b7c5c9..7f1436d76e 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -15,6 +15,7 @@ endif obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ obj-$(if $(filter spear,$(SOC)),y) += spear/ +obj-$(CONFIG_ARCH_SUNXI) += sunxi/ # some files can only build in ARM or THUMB2, not THUMB1 diff --git a/arch/arm/cpu/arm926ejs/cpu.c b/arch/arm/cpu/arm926ejs/cpu.c index 93d7a02ed4..2ce413a7f8 100644 --- a/arch/arm/cpu/arm926ejs/cpu.c +++ b/arch/arm/cpu/arm926ejs/cpu.c @@ -21,6 +21,19 @@ static void cache_flush(void); +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + int cleanup_before_linux (void) { /* diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 0afcc47aad..aca7793c57 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -17,6 +17,7 @@ #include #include #include +#include /* ************************************************************************* @@ -32,8 +33,13 @@ */ .globl reset + .globl save_boot_params_ret + .type save_boot_params_ret,%function reset: + /* Allow the board to save important registers */ + b save_boot_params +save_boot_params_ret: /* * set the cpu to SVC32 mode */ @@ -110,3 +116,16 @@ flush_dcache: #endif mov pc, lr /* back to my caller */ #endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ + +/************************************************************************* + * + * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) + * __attribute__((weak)); + * + * Stack pointer is not yet initialized at this moment + * Don't save anything to stack even if compiled with -O0 + * + *************************************************************************/ +WEAK(save_boot_params) + b save_boot_params_ret /* back to my caller */ +ENDPROC(save_boot_params) diff --git a/arch/arm/cpu/arm926ejs/sunxi/Makefile b/arch/arm/cpu/arm926ejs/sunxi/Makefile new file mode 100644 index 0000000000..7d8b959dcd --- /dev/null +++ b/arch/arm/cpu/arm926ejs/sunxi/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2012 Henrik Nordstrom + +obj-y += fel_utils.o +CFLAGS_fel_utils.o := -marm diff --git a/arch/arm/cpu/arm926ejs/sunxi/config.mk b/arch/arm/cpu/arm926ejs/sunxi/config.mk new file mode 100644 index 0000000000..76ffec9df6 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/sunxi/config.mk @@ -0,0 +1,6 @@ +# Build a combined spl + u-boot image +ifdef CONFIG_SPL +ifndef CONFIG_SPL_BUILD +ALL-y += u-boot-sunxi-with-spl.bin +endif +endif diff --git a/arch/arm/cpu/arm926ejs/sunxi/fel_utils.S b/arch/arm/cpu/arm926ejs/sunxi/fel_utils.S new file mode 100644 index 0000000000..08be7ed11a --- /dev/null +++ b/arch/arm/cpu/arm926ejs/sunxi/fel_utils.S @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Utility functions for FEL mode. + * + * Copyright (c) 2015 Google, Inc + */ + +#include +#include +#include +#include + +ENTRY(save_boot_params) + ldr r0, =fel_stash + str sp, [r0, #0] + str lr, [r0, #4] + mrs lr, cpsr @ Read CPSR + str lr, [r0, #8] + mrc p15, 0, lr, c1, c0, 0 @ Read CP15 SCTLR Register + str lr, [r0, #12] + b save_boot_params_ret +ENDPROC(save_boot_params) + +ENTRY(return_to_fel) + mov sp, r0 + mov lr, r1 + ldr r0, =fel_stash + ldr r1, [r0, #16] + mcr p15, 0, r1, c1, c0, 0 @ Write CP15 Control Register + ldr r1, [r0, #12] + msr cpsr, r1 @ Write CPSR + bx lr +ENDPROC(return_to_fel) diff --git a/arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds new file mode 100644 index 0000000000..9a000ac5d3 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2018 + * Icenowy Zheng + * + * Based on arch/arm/cpu/armv7/sunxi/u-boot-spl.lds: + */ +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + *(.vectors) + *(.text*) + } > .sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } > .sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } > .sdram +} diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig index 60bb0a9e1e..2eeef3cba9 100644 --- a/arch/arm/cpu/armv7/Kconfig +++ b/arch/arm/cpu/armv7/Kconfig @@ -76,4 +76,9 @@ config ARMV7_LPAE Say Y here to use the long descriptor page table format. This is required if U-Boot runs in HYP mode. +config SPL_ARMV7_SET_CORTEX_SMPEN + bool + help + Enable the ARM Cortex ACTLR.SMP enable bit on SPL startup. + endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 698e15b8e1..af87a5432a 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -173,6 +173,17 @@ ENDPROC(switch_to_hypervisor) * *************************************************************************/ ENTRY(cpu_init_cp15) + +#if CONFIG_IS_ENABLED(ARMV7_SET_CORTEX_SMPEN) + /* + * The Arm Cortex-A7 TRM says this bit must be enabled before + * "any cache or TLB maintenance operations are performed". + */ + mrc p15, 0, r0, c1, c0, 1 @ read auxilary control register + orr r0, r0, #1 << 6 @ set SMP bit to enable coherency + mcr p15, 0, r0, c1, c0, 1 @ write auxilary control register +#endif + /* * Invalidate L1 I/D */ diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 1d40d6a18d..3e975b366c 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -5,11 +5,13 @@ # Based on some other Makefile # (C) Copyright 2000-2003 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -obj-y += timer.o obj-$(CONFIG_MACH_SUN6I) += tzpc.o obj-$(CONFIG_MACH_SUN8I_H3) += tzpc.o +obj-$(CONFIG_MACH_SUN6I) += sram.o +obj-$(CONFIG_MACH_SUN8I) += sram.o + ifndef CONFIG_SPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif diff --git a/arch/arm/cpu/armv7/sunxi/sram.c b/arch/arm/cpu/armv7/sunxi/sram.c new file mode 100644 index 0000000000..28564c2846 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/sram.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2012 Henrik Nordstrom + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SRAM init for older sunxi SoCs. + */ + +#include +#include +#include + +void sunxi_sram_init(void) +{ + /* + * Undocumented magic taken from boot0, without this DRAM + * access gets messed up (seems cache related). + * The boot0 sources describe this as: "config ema for cache sram" + * Newer SoCs (A83T, H3 and anything beyond) don't need this anymore. + */ + if (IS_ENABLED(CONFIG_MACH_SUN6I)) + setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800); + + if (IS_ENABLED(CONFIG_MACH_SUN8I)) { + uint version = sunxi_get_sram_id(); + + if (IS_ENABLED(CONFIG_MACH_SUN8I_A23)) { + if (version == 0x1650) + setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800); + else /* 0x1661 ? */ + setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0); + } else if (IS_ENABLED(CONFIG_MACH_SUN8I_A33)) { + if (version != 0x1667) + setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0); + } + } +} diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index d85ddde430..85fe0475c8 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -42,6 +42,5 @@ obj-$(CONFIG_FSL_LAYERSCAPE) += fsl-layerscape/ obj-$(CONFIG_S32V234) += s32v234/ obj-$(CONFIG_TARGET_HIKEY) += hisilicon/ obj-$(CONFIG_ARMV8_PSCI) += psci.o -obj-$(CONFIG_ARCH_SUNXI) += lowlevel_init.o obj-$(CONFIG_TARGET_BCMNS3) += bcmns3/ obj-$(CONFIG_XEN) += xen/ diff --git a/arch/arm/cpu/armv8/lowlevel_init.S b/arch/arm/cpu/armv8/lowlevel_init.S deleted file mode 100644 index f4f0cdce9b..0000000000 --- a/arch/arm/cpu/armv8/lowlevel_init.S +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * A lowlevel_init function that sets up the stack to call a C function to - * perform further init. - */ - -#include -#include -#include - -ENTRY(lowlevel_init) - /* - * Setup a temporary stack. Global data is not available yet. - */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) - ldr w0, =CONFIG_SPL_STACK -#else - ldr w0, =CONFIG_SYS_INIT_SP_ADDR -#endif - bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ - - /* - * Save the old LR(passed in x29) and the current LR to stack - */ - stp x29, x30, [sp, #-16]! - - /* - * Call the very early init function. This should do only the - * absolute bare minimum to get started. It should not: - * - * - set up DRAM - * - use global_data - * - clear BSS - * - try to start a console - * - * For boards with SPL this should be empty since SPL can do all of - * this init in the SPL board_init_f() function which is called - * immediately after this. - */ - bl s_init - ldp x29, x30, [sp] - ret -ENDPROC(lowlevel_init) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0ed8de2a8f..75ea7e8e37 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -504,6 +504,8 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \ stm32h743i-eval.dtb \ stm32h750i-art-pi.dtb +dtb-$(CONFIG_MACH_SUNIV) += \ + suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts new file mode 100644 index 0000000000..a1154e6c7c --- /dev/null +++ b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2018 Icenowy Zheng + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +/ { + model = "Lichee Pi Nano"; + compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi new file mode 100644 index 0000000000..6100d3b75f --- /dev/null +++ b/arch/arm/dts/suniv-f1c100s.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2018 Icenowy Zheng + * Copyright 2018 Mesih Kilinc + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + clocks { + osc24M: clk-24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk-32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + cpus { + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram-controller@1c00000 { + compatible = "allwinner,suniv-f1c100s-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_d: sram@10000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0 { + compatible = "allwinner,suniv-f1c100s-sram-d", + "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,suniv-f1c100s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + intc: interrupt-controller@1c20400 { + compatible = "allwinner,suniv-f1c100s-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,suniv-f1c100s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <38>, <39>, <40>; + clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + uart0_pe_pins: uart0-pe-pins { + pins = "PE0", "PE1"; + function = "uart0"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,suniv-f1c100s-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <13>; + clocks = <&osc24M>; + }; + + wdt: watchdog@1c20ca0 { + compatible = "allwinner,suniv-f1c100s-wdt", + "allwinner,sun4i-a10-wdt"; + reg = <0x01c20ca0 0x20>; + }; + + uart0: serial@1c25000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 38>; + resets = <&ccu 24>; + status = "disabled"; + }; + + uart1: serial@1c25400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 39>; + resets = <&ccu 25>; + status = "disabled"; + }; + + uart2: serial@1c25800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 40>; + resets = <&ccu 26>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index f2d7361b84..0f573e6d7a 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -12,7 +12,9 @@ / { aliases { +#ifndef CONFIG_MACH_SUNIV mmc0 = &mmc0; +#endif #if CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 mmc1 = &mmc2; #endif diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index cbbe5c7a1e..2cfd540742 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -19,7 +19,7 @@ #elif defined(CONFIG_SUN50I_GEN_H6) #include #elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \ - defined(CONFIG_MACH_SUN50I) + defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUNIV) #include #elif defined(CONFIG_MACH_SUN9I) #include diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index ee387127f3..7fcf340db6 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -226,7 +226,12 @@ struct sunxi_ccm_reg { #define CCM_PLL5_CTRL_SIGMA_DELTA_EN (0x1 << 24) #define CCM_PLL5_CTRL_EN (0x1 << 31) +#ifdef CONFIG_MACH_SUNIV +/* suniv pll6 doesn't have postdiv 2, so k is set to 0 */ +#define PLL6_CFG_DEFAULT 0x90041801 +#else #define PLL6_CFG_DEFAULT 0x90041811 /* 600 MHz */ +#endif #define CCM_PLL6_CTRL_N_SHIFT 8 #define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) @@ -488,6 +493,14 @@ struct sunxi_ccm_reg { #define AHB_RESET_OFFSET_EPHY 2 #define AHB_RESET_OFFSET_LVDS 0 +/* apb1 reset */ +#ifdef CONFIG_MACH_SUNIV +#define APB1_GATE_UART_SHIFT (20) +#define APB1_GATE_TWI_SHIFT (16) +#define APB1_RESET_UART_SHIFT (20) +#define APB1_RESET_TWI_SHIFT (16) +#endif + /* apb2 reset */ #define APB2_RESET_UART_SHIFT (16) #define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h index d4c795d89c..f7ecc790db 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h @@ -129,9 +129,15 @@ defined(CONFIG_MACH_SUN50I) #define SUNXI_CPUCFG_BASE 0x01c25c00 #endif +#ifdef CONFIG_MACH_SUNIV +#define SUNXI_UART0_BASE 0x01c25000 +#define SUNXI_UART1_BASE 0x01c25400 +#define SUNXI_UART2_BASE 0x01c25800 +#else #define SUNXI_UART0_BASE 0x01c28000 #define SUNXI_UART1_BASE 0x01c28400 #define SUNXI_UART2_BASE 0x01c28800 +#endif #define SUNXI_UART3_BASE 0x01c28c00 #define SUNXI_UART4_BASE 0x01c29000 #define SUNXI_UART5_BASE 0x01c29400 @@ -226,6 +232,7 @@ void sunxi_board_init(void); void sunxi_reset(void); int sunxi_get_ss_bonding_id(void); int sunxi_get_sid(unsigned int *sid); +unsigned int sunxi_get_sram_id(void); #endif /* __ASSEMBLY__ */ #endif /* _SUNXI_CPU_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index c3b3e1f512..682daae6b1 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -31,6 +31,8 @@ #include #elif defined(CONFIG_MACH_SUN50I_H616) #include +#elif defined(CONFIG_MACH_SUNIV) +#include #else #include #endif diff --git a/arch/arm/include/asm/arch-sunxi/dram_suniv.h b/arch/arm/include/asm/arch-sunxi/dram_suniv.h new file mode 100644 index 0000000000..6f4c0512d6 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram_suniv.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * suniv DRAM controller register definition + * + * Copyright (C) 2018 Icenowy Zheng + * + * Based on xboot's arch/arm32/mach-f1c100s/sys-dram.c, which is: + * + * Copyright(c) 2007-2018 Jianjun Jiang <8192542@qq.com> + */ + +#define PIO_SDRAM_DRV (0x2c0) +#define PIO_SDRAM_PULL (0x2c4) + +#define DRAM_SCONR (0x00) +#define DRAM_STMG0R (0x04) +#define DRAM_STMG1R (0x08) +#define DRAM_SCTLR (0x0c) +#define DRAM_SREFR (0x10) +#define DRAM_SEXTMR (0x14) +#define DRAM_DDLYR (0x24) +#define DRAM_DADRR (0x28) +#define DRAM_DVALR (0x2c) +#define DRAM_DRPTR0 (0x30) +#define DRAM_DRPTR1 (0x34) +#define DRAM_DRPTR2 (0x38) +#define DRAM_DRPTR3 (0x3c) +#define DRAM_SEFR (0x40) +#define DRAM_MAE (0x44) +#define DRAM_ASPR (0x48) +#define DRAM_SDLY0 (0x4C) +#define DRAM_SDLY1 (0x50) +#define DRAM_SDLY2 (0x54) +#define DRAM_MCR0 (0x100) +#define DRAM_MCR1 (0x104) +#define DRAM_MCR2 (0x108) +#define DRAM_MCR3 (0x10c) +#define DRAM_MCR4 (0x110) +#define DRAM_MCR5 (0x114) +#define DRAM_MCR6 (0x118) +#define DRAM_MCR7 (0x11c) +#define DRAM_MCR8 (0x120) +#define DRAM_MCR9 (0x124) +#define DRAM_MCR10 (0x128) +#define DRAM_MCR11 (0x12c) +#define DRAM_BWCR (0x140) diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 106605adf5..7f7eb0517c 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -165,6 +165,7 @@ enum sunxi_gpio_number { #define SUNXI_GPD_LVDS0 3 #define SUNXI_GPD_PWM 2 +#define SUNIV_GPE_UART0 5 #define SUN8I_GPE_TWI2 3 #define SUN50I_GPE_TWI2 3 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d7f9a03152..205fe3c9d3 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,6 +1,7 @@ if ARCH_SUNXI config SPL_LDSCRIPT + default "arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds" if MACH_SUNIV default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64 config IDENT_STRING @@ -183,10 +184,15 @@ choice prompt "Sunxi SoC Variant" optional +config MACH_SUNIV + bool "suniv (Allwinner F1C100s/F1C200s/F1C600/R6)" + select CPU_ARM926EJS + select SUNXI_GEN_SUN6I + select SUPPORT_SPL + config MACH_SUN4I bool "sun4i (Allwinner A10)" select CPU_V7A - select ARM_CORTEX_CPU_IS_UP select PHY_SUN4I_USB select DRAM_SUN4I select SUNXI_GEN_SUN4I @@ -197,7 +203,6 @@ config MACH_SUN4I config MACH_SUN5I bool "sun5i (Allwinner A13)" select CPU_V7A - select ARM_CORTEX_CPU_IS_UP select DRAM_SUN4I select PHY_SUN4I_USB select SUNXI_GEN_SUN4I @@ -212,6 +217,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select SPL_ARMV7_SET_CORTEX_SMPEN select DRAM_SUN6I select PHY_SUN4I_USB select SPL_I2C @@ -227,6 +233,7 @@ config MACH_SUN7I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select SPL_ARMV7_SET_CORTEX_SMPEN select DRAM_SUN4I select PHY_SUN4I_USB select SUNXI_GEN_SUN4I @@ -315,6 +322,7 @@ config MACH_SUN8I_V3S config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7A + select SPL_ARMV7_SET_CORTEX_SMPEN select DRAM_SUN9I select SPL_I2C select SUN6I_PRCM @@ -365,6 +373,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool + select SPL_ARMV7_SET_CORTEX_SMPEN if !ARM64 select SUN6I_PRCM default y if MACH_SUN8I_A23 default y if MACH_SUN8I_A33 @@ -587,6 +596,7 @@ config DRAM_ODT_CORRECTION endif config SYS_CLK_FREQ + default 408000000 if MACH_SUNIV default 1008000000 if MACH_SUN4I default 1008000000 if MACH_SUN5I default 1008000000 if MACH_SUN6I @@ -598,6 +608,7 @@ config SYS_CLK_FREQ default 1008000000 if MACH_SUN50I_H616 config SYS_CONFIG_NAME + default "suniv" if MACH_SUNIV default "sun4i" if MACH_SUN4I default "sun5i" if MACH_SUN5I default "sun6i" if MACH_SUN6I @@ -815,7 +826,7 @@ config VIDEO_SUNXI config VIDEO_HDMI bool "HDMI output support" - depends on VIDEO_SUNXI && !MACH_SUN8I + depends on VIDEO_SUNXI && !MACH_SUN8I && !MACH_SUNIV default y ---help--- Say Y here to add support for outputting video over HDMI. @@ -1015,6 +1026,7 @@ config GMAC_TX_DELAY Set the GMAC Transmit Clock Delay Chain value. config SPL_STACK_R_ADDR + default 0x81e00000 if MACH_SUNIV default 0x4fe00000 if MACH_SUN4I default 0x4fe00000 if MACH_SUN5I default 0x4fe00000 if MACH_SUN6I diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 5d3fd70f74..58f807cb82 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -13,6 +13,7 @@ obj-y += dram_helpers.o obj-y += pinmux.o obj-$(CONFIG_SUN6I_PRCM) += prcm.o obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o +obj-$(CONFIG_MACH_SUNIV) += clock_sun6i.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o @@ -25,8 +26,12 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o obj-$(CONFIG_SUN50I_GEN_H6) += clock_sun50i_h6.o +ifndef CONFIG_ARM64 +obj-y += timer.o +endif ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_MACH_SUNIV) += dram_suniv.o obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 3ef179742c..57078f7a7b 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -75,6 +75,7 @@ ulong board_get_usable_ram_top(ulong total_size) } #endif +#ifdef CONFIG_SPL_BUILD static int gpio_init(void) { __maybe_unused uint val; @@ -86,7 +87,8 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); #endif -#if defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40) +#if (defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40)) || \ + defined(CONFIG_MACH_SUNIV) sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0); #else @@ -94,6 +96,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0); #endif sunxi_gpio_set_pull(SUNXI_GPF(4), 1); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNIV) + sunxi_gpio_set_cfgpin(SUNXI_GPE(0), SUNIV_GPE_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPE(1), SUNIV_GPE_UART0); + sunxi_gpio_set_pull(SUNXI_GPE(1), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || \ defined(CONFIG_MACH_SUN7I) || \ defined(CONFIG_MACH_SUN8I_R40)) @@ -172,7 +178,6 @@ static int gpio_init(void) return 0; } -#if defined(CONFIG_SPL_BOARD_LOAD_IMAGE) && defined(CONFIG_SPL_BUILD) static int spl_board_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { @@ -184,63 +189,6 @@ static int spl_board_load_image(struct spl_image_info *spl_image, SPL_LOAD_IMAGE_METHOD("FEL", 0, BOOT_DEVICE_BOARD, spl_board_load_image); #endif -void s_init(void) -{ - /* - * Undocumented magic taken from boot0, without this DRAM - * access gets messed up (seems cache related). - * The boot0 sources describe this as: "config ema for cache sram" - */ -#if defined CONFIG_MACH_SUN6I - setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800); -#elif defined CONFIG_MACH_SUN8I - __maybe_unused uint version; - - /* Unlock sram version info reg, read it, relock */ - setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15)); - version = readl(SUNXI_SRAMC_BASE + 0x24) >> 16; - clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15)); - - /* - * Ideally this would be a switch case, but we do not know exactly - * which versions there are and which version needs which settings, - * so reproduce the per SoC code from the BSP. - */ -#if defined CONFIG_MACH_SUN8I_A23 - if (version == 0x1650) - setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800); - else /* 0x1661 ? */ - setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0); -#elif defined CONFIG_MACH_SUN8I_A33 - if (version != 0x1667) - setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0); -#endif - /* A83T BSP never modifies SUNXI_SRAMC_BASE + 0x44 */ - /* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */ -#endif - -#if !defined(CONFIG_ARM_CORTEX_CPU_IS_UP) && !defined(CONFIG_ARM64) - /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ - asm volatile( - "mrc p15, 0, r0, c1, c0, 1\n" - "orr r0, r0, #1 << 6\n" - "mcr p15, 0, r0, c1, c0, 1\n" - ::: "r0"); -#endif -#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3 - /* Enable non-secure access to some peripherals */ - tzpc_init(); -#endif - - clock_init(); - timer_init(); - gpio_init(); -#if !CONFIG_IS_ENABLED(DM_I2C) - i2c_init_board(); -#endif - eth_init_board(); -} - #define SUNXI_INVALID_BOOT_SOURCE -1 static int sunxi_get_boot_source(void) @@ -328,18 +276,61 @@ unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc, return sector; } +#ifdef CONFIG_MACH_SUNIV +/* + * The suniv BROM does not pass the boot media type to SPL, so we try with the + * boot sequence in BROM: mmc0->spinor->fail. + * TODO: This has the slight chance of being wrong (invalid SPL signature, + * but valid U-Boot legacy image on the SD card), but this should be rare. + * It looks like we can deduce from some BROM state upon entering the SPL + * (registers, SP, or stack itself) where the BROM was coming from and use + * that here. + */ +void board_boot_order(u32 *spl_boot_list) +{ + /* + * See the comments above in sunxi_get_boot_device() for information + * about FEL boot. + */ + if (!is_boot0_magic(SPL_ADDR + 4)) { + spl_boot_list[0] = BOOT_DEVICE_BOARD; + return; + } + + spl_boot_list[0] = BOOT_DEVICE_MMC1; + spl_boot_list[1] = BOOT_DEVICE_SPI; +} +#else u32 spl_boot_device(void) { return sunxi_get_boot_device(); } +#endif + +__weak void sunxi_sram_init(void) +{ +} void board_init_f(ulong dummy) { + sunxi_sram_init(); + +#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3 + /* Enable non-secure access to some peripherals */ + tzpc_init(); +#endif + + clock_init(); + timer_init(); + gpio_init(); + eth_init_board(); + spl_init(); preloader_console_init(); #if CONFIG_IS_ENABLED(I2C) && CONFIG_IS_ENABLED(SYS_I2C_LEGACY) /* Needed early by sunxi_board_init if PMU is enabled */ + i2c_init_board(); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif sunxi_board_init(); diff --git a/arch/arm/mach-sunxi/clock.c b/arch/arm/mach-sunxi/clock.c index de7e875298..da3a0eb058 100644 --- a/arch/arm/mach-sunxi/clock.c +++ b/arch/arm/mach-sunxi/clock.c @@ -35,7 +35,8 @@ int clock_init(void) } /* These functions are shared between various SoCs so put them here. */ -#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I +#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I && \ + !defined CONFIG_MACH_SUNIV int clock_twi_onoff(int port, int state) { struct sunxi_ccm_reg *const ccm = diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index 8e84062bd7..cda6949dff 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -23,7 +23,8 @@ void clock_init_safe(void) struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I) +#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I) && \ + !defined(CONFIG_MACH_SUNIV) struct sunxi_prcm_reg * const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; @@ -49,9 +50,11 @@ void clock_init_safe(void) writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); - writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg); - if (IS_ENABLED(CONFIG_MACH_SUN6I)) - writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); + if (!IS_ENABLED(CONFIG_MACH_SUNIV)) { + writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg); + if (IS_ENABLED(CONFIG_MACH_SUN6I)) + writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); + } #if defined(CONFIG_MACH_SUN8I_R40) && defined(CONFIG_SUNXI_AHCI) setbits_le32(&ccm->sata_pll_cfg, CCM_SATA_PLL_DEFAULT); @@ -87,22 +90,36 @@ void clock_init_uart(void) struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - /* uart clock source is apb2 */ - writel(APB2_CLK_SRC_OSC24M| - APB2_CLK_RATE_N_1| - APB2_CLK_RATE_M(1), - &ccm->apb2_div); +#ifdef CONFIG_MACH_SUNIV + /* suniv doesn't have apb2, UART clock source is always apb1 */ - /* open the clock for uart */ - setbits_le32(&ccm->apb2_gate, - CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT + - CONFIG_CONS_INDEX - 1)); + /* open the clock for uart */ + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); - /* deassert uart reset */ - setbits_le32(&ccm->apb2_reset_cfg, - 1 << (APB2_RESET_UART_SHIFT + - CONFIG_CONS_INDEX - 1)); + /* deassert uart reset */ + setbits_le32(&ccm->apb1_reset_cfg, + 1 << (APB1_RESET_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); #else + /* uart clock source is apb2 */ + writel(APB2_CLK_SRC_OSC24M| + APB2_CLK_RATE_N_1| + APB2_CLK_RATE_M(1), + &ccm->apb2_div); + + /* open the clock for uart */ + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); + + /* deassert uart reset */ + setbits_le32(&ccm->apb2_reset_cfg, + 1 << (APB2_RESET_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); +#endif /* !CONFIG_MACH_SUNIV */ +#else /* CONFIG_CONS_INDEX >= 5 */ /* enable R_PIO and R_UART clocks, and de-assert resets */ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART); #endif @@ -125,10 +142,15 @@ void clock_set_pll1(unsigned int clk) } /* Switch to 24MHz clock while changing PLL1 */ - writel(AXI_DIV_3 << AXI_DIV_SHIFT | - ATB_DIV_2 << ATB_DIV_SHIFT | - CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, - &ccm->cpu_axi_cfg); + if (IS_ENABLED(CONFIG_MACH_SUNIV)) { + writel(CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); + } else { + writel(AXI_DIV_3 << AXI_DIV_SHIFT | + ATB_DIV_2 << ATB_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); + } /* * sun6i: PLL1 rate = ((24000000 * n * k) >> 0) / m (p is ignored) @@ -140,10 +162,15 @@ void clock_set_pll1(unsigned int clk) sdelay(200); /* Switch CPU to PLL1 */ - writel(AXI_DIV_3 << AXI_DIV_SHIFT | - ATB_DIV_2 << ATB_DIV_SHIFT | - CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, - &ccm->cpu_axi_cfg); + if (IS_ENABLED(CONFIG_MACH_SUNIV)) { + writel(CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); + } else { + writel(AXI_DIV_3 << AXI_DIV_SHIFT | + ATB_DIV_2 << ATB_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); + } } #endif @@ -317,7 +344,10 @@ unsigned int clock_get_pll6(void) uint32_t rval = readl(&ccm->pll6_cfg); int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; - return 24000000 * n * k / 2; + if (IS_ENABLED(CONFIG_MACH_SUNIV)) + return 24000000 * n * k; + else + return 24000000 * n * k / 2; } unsigned int clock_get_mipi_pll(void) diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c index ba33ef2430..7eef178859 100644 --- a/arch/arm/mach-sunxi/cpu_info.c +++ b/arch/arm/mach-sunxi/cpu_info.c @@ -57,6 +57,8 @@ int print_cpuinfo(void) { #ifdef CONFIG_MACH_SUN4I puts("CPU: Allwinner A10 (SUN4I)\n"); +#elif defined CONFIG_MACH_SUNIV + puts("CPU: Allwinner F Series (SUNIV)\n"); #elif defined CONFIG_MACH_SUN5I u32 val = readl(SUNXI_SID_BASE + 0x08); switch ((val >> 12) & 0xf) { diff --git a/arch/arm/mach-sunxi/dram_helpers.c b/arch/arm/mach-sunxi/dram_helpers.c index 520b597fcc..2c873192e6 100644 --- a/arch/arm/mach-sunxi/dram_helpers.c +++ b/arch/arm/mach-sunxi/dram_helpers.c @@ -26,7 +26,10 @@ void mctl_await_completion(u32 *reg, u32 mask, u32 val) /* * Test if memory at offset offset matches memory at begin of DRAM + * + * Note: dsb() is not available on ARMv5 in Thumb mode */ +#ifndef CONFIG_MACH_SUNIV bool mctl_mem_matches(u32 offset) { /* Try to write different values to RAM at two addresses */ @@ -37,3 +40,4 @@ bool mctl_mem_matches(u32 offset) return readl(CONFIG_SYS_SDRAM_BASE) == readl((ulong)CONFIG_SYS_SDRAM_BASE + offset); } +#endif diff --git a/arch/arm/mach-sunxi/dram_suniv.c b/arch/arm/mach-sunxi/dram_suniv.c new file mode 100644 index 0000000000..56c2d557ff --- /dev/null +++ b/arch/arm/mach-sunxi/dram_suniv.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * suniv DRAM initialization + * + * Copyright (C) 2018 Icenowy Zheng + * + * Based on xboot's arch/arm32/mach-f1c100s/sys-dram.c, which is: + * + * Copyright(c) 2007-2018 Jianjun Jiang <8192542@qq.com> + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SDR_T_CAS (0x2) +#define SDR_T_RAS (0x8) +#define SDR_T_RCD (0x3) +#define SDR_T_RP (0x3) +#define SDR_T_WR (0x3) +#define SDR_T_RFC (0xd) +#define SDR_T_XSR (0xf9) +#define SDR_T_RC (0xb) +#define SDR_T_INIT (0x8) +#define SDR_T_INIT_REF (0x7) +#define SDR_T_WTR (0x2) +#define SDR_T_RRD (0x2) +#define SDR_T_XP (0x0) + +enum dram_type { + DRAM_TYPE_SDR = 0, + DRAM_TYPE_DDR = 1, + /* Not supported yet. */ + DRAM_TYPE_MDDR = 2, +}; + +struct dram_para { + u32 size; /* dram size (unit: MByte) */ + u32 clk; /* dram work clock (unit: MHz) */ + u32 access_mode; /* 0: interleave mode 1: sequence mode */ + u32 cs_num; /* dram chip count 1: one chip 2: two chip */ + u32 ddr8_remap; /* for 8bits data width DDR 0: normal 1: 8bits */ + enum dram_type sdr_ddr; + u32 bwidth; /* dram bus width */ + u32 col_width; /* column address width */ + u32 row_width; /* row address width */ + u32 bank_size; /* dram bank count */ + u32 cas; /* dram cas */ +}; + +struct dram_para suniv_dram_para = { + .size = 32, + .clk = 156, + .access_mode = 1, + .cs_num = 1, + .ddr8_remap = 0, + .sdr_ddr = DRAM_TYPE_DDR, + .bwidth = 16, + .col_width = 10, + .row_width = 13, + .bank_size = 4, + .cas = 0x3, +}; + +static int dram_initial(void) +{ + unsigned int time = 0xffffff; + + setbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, 0x1); + while ((readl(SUNXI_DRAMC_BASE + DRAM_SCTLR) & 0x1) && time--) { + if (time == 0) + return 0; + } + return 1; +} + +static int dram_delay_scan(void) +{ + unsigned int time = 0xffffff; + + setbits_le32(SUNXI_DRAMC_BASE + DRAM_DDLYR, 0x1); + while ((readl(SUNXI_DRAMC_BASE + DRAM_DDLYR) & 0x1) && time--) { + if (time == 0) + return 0; + } + return 1; +} + +static void dram_set_autofresh_cycle(u32 clk) +{ + u32 val = 0; + u32 row = 0; + u32 temp = 0; + + row = readl(SUNXI_DRAMC_BASE + DRAM_SCONR); + row &= 0x1e0; + row >>= 0x5; + + if (row == 0xc) { + if (clk >= 1000000) { + temp = clk + (clk >> 3) + (clk >> 4) + (clk >> 5); + while (temp >= (10000000 >> 6)) { + temp -= (10000000 >> 6); + val++; + } + } else { + val = (clk * 499) >> 6; + } + } else if (row == 0xb) { + if (clk >= 1000000) { + temp = clk + (clk >> 3) + (clk >> 4) + (clk >> 5); + while (temp >= (10000000 >> 7)) { + temp -= (10000000 >> 7); + val++; + } + } else { + val = (clk * 499) >> 5; + } + } + writel(val, SUNXI_DRAMC_BASE + DRAM_SREFR); +} + +static int dram_para_setup(struct dram_para *para) +{ + u32 val = 0; + + val = (para->ddr8_remap) | (0x1 << 1) | + ((para->bank_size >> 2) << 3) | + ((para->cs_num >> 1) << 4) | + ((para->row_width - 1) << 5) | + ((para->col_width - 1) << 9) | + ((para->sdr_ddr ? (para->bwidth >> 4) : (para->bwidth >> 5)) << 13) | + (para->access_mode << 15) | + (para->sdr_ddr << 16); + + writel(val, SUNXI_DRAMC_BASE + DRAM_SCONR); + setbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, 0x1 << 19); + return dram_initial(); +} + +static u32 dram_check_delay(u32 bwidth) +{ + u32 dsize; + int i, j; + u32 num = 0; + u32 dflag = 0; + + dsize = ((bwidth == 16) ? 4 : 2); + for (i = 0; i < dsize; i++) { + if (i == 0) + dflag = readl(SUNXI_DRAMC_BASE + DRAM_DRPTR0); + else if (i == 1) + dflag = readl(SUNXI_DRAMC_BASE + DRAM_DRPTR1); + else if (i == 2) + dflag = readl(SUNXI_DRAMC_BASE + DRAM_DRPTR2); + else if (i == 3) + dflag = readl(SUNXI_DRAMC_BASE + DRAM_DRPTR3); + + for (j = 0; j < 32; j++) { + if (dflag & 0x1) + num++; + dflag >>= 1; + } + } + return num; +} + +static int sdr_readpipe_scan(void) +{ + u32 k = 0; + + for (k = 0; k < 32; k++) + writel(k, CONFIG_SYS_SDRAM_BASE + 4 * k); + for (k = 0; k < 32; k++) { + if (readl(CONFIG_SYS_SDRAM_BASE + 4 * k) != k) + return 0; + } + return 1; +} + +static u32 sdr_readpipe_select(void) +{ + u32 value = 0; + u32 i = 0; + + for (i = 0; i < 8; i++) { + clrsetbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, + 0x7 << 6, i << 6); + if (sdr_readpipe_scan()) { + value = i; + return value; + } + } + return value; +} + +static u32 dram_check_type(struct dram_para *para) +{ + u32 times = 0; + int i; + + for (i = 0; i < 8; i++) { + clrsetbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, + 0x7 << 6, i << 6); + dram_delay_scan(); + if (readl(SUNXI_DRAMC_BASE + DRAM_DDLYR) & 0x30) + times++; + } + + if (times == 8) { + para->sdr_ddr = DRAM_TYPE_SDR; + return 0; + } + para->sdr_ddr = DRAM_TYPE_DDR; + return 1; +} + +static u32 dram_scan_readpipe(struct dram_para *para) +{ + u32 rp_best = 0, rp_val = 0; + u32 readpipe[8]; + int i; + + if (para->sdr_ddr == DRAM_TYPE_DDR) { + for (i = 0; i < 8; i++) { + clrsetbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, + 0x7 << 6, i << 6); + dram_delay_scan(); + readpipe[i] = 0; + if ((((readl(SUNXI_DRAMC_BASE + DRAM_DDLYR) >> 4) & 0x3) == 0x0) && + (((readl(SUNXI_DRAMC_BASE + DRAM_DDLYR) >> 4) & 0x1) == 0x0)) + readpipe[i] = dram_check_delay(para->bwidth); + if (rp_val < readpipe[i]) { + rp_val = readpipe[i]; + rp_best = i; + } + } + clrsetbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, + 0x7 << 6, rp_best << 6); + dram_delay_scan(); + } else { + clrbits_le32(SUNXI_DRAMC_BASE + DRAM_SCONR, + (0x1 << 16) | (0x3 << 13)); + rp_best = sdr_readpipe_select(); + clrsetbits_le32(SUNXI_DRAMC_BASE + DRAM_SCTLR, + 0x7 << 6, rp_best << 6); + } + return 0; +} + +static u32 dram_get_dram_size(struct dram_para *para) +{ + u32 colflag = 10, rowflag = 13; + u32 val1 = 0; + u32 count = 0; + u32 addr1, addr2; + int i; + + para->col_width = colflag; + para->row_width = rowflag; + dram_para_setup(para); + dram_scan_readpipe(para); + for (i = 0; i < 32; i++) { + *((u8 *)(CONFIG_SYS_SDRAM_BASE + 0x200 + i)) = 0x11; + *((u8 *)(CONFIG_SYS_SDRAM_BASE + 0x600 + i)) = 0x22; + } + for (i = 0; i < 32; i++) { + val1 = *((u8 *)(CONFIG_SYS_SDRAM_BASE + 0x200 + i)); + if (val1 == 0x22) + count++; + } + if (count == 32) + colflag = 9; + else + colflag = 10; + count = 0; + para->col_width = colflag; + para->row_width = rowflag; + dram_para_setup(para); + if (colflag == 10) { + addr1 = CONFIG_SYS_SDRAM_BASE + 0x400000; + addr2 = CONFIG_SYS_SDRAM_BASE + 0xc00000; + } else { + addr1 = CONFIG_SYS_SDRAM_BASE + 0x200000; + addr2 = CONFIG_SYS_SDRAM_BASE + 0x600000; + } + for (i = 0; i < 32; i++) { + *((u8 *)(addr1 + i)) = 0x33; + *((u8 *)(addr2 + i)) = 0x44; + } + for (i = 0; i < 32; i++) { + val1 = *((u8 *)(addr1 + i)); + if (val1 == 0x44) + count++; + } + if (count == 32) + rowflag = 12; + else + rowflag = 13; + para->col_width = colflag; + para->row_width = rowflag; + if (para->row_width != 13) + para->size = 16; + else if (para->col_width == 10) + para->size = 64; + else + para->size = 32; + dram_set_autofresh_cycle(para->clk); + para->access_mode = 0; + dram_para_setup(para); + + return 0; +} + +static void simple_dram_check(void) +{ + volatile u32 *dram = (u32 *)CONFIG_SYS_SDRAM_BASE; + int i; + + for (i = 0; i < 0x40; i++) + dram[i] = i; + + for (i = 0; i < 0x40; i++) { + if (dram[i] != i) { + printf("DRAM initialization failed: dram[0x%x] != 0x%x.", i, dram[i]); + hang(); + } + } + + for (i = 0; i < 0x10000; i += 0x40) + dram[i] = i; + + for (i = 0; i < 0x10000; i += 0x40) { + if (dram[i] != i) { + printf("DRAM initialization failed: dram[0x%x] != 0x%x.", i, dram[i]); + hang(); + } + } +} + +static void do_dram_init(struct dram_para *para) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + u32 val; + u8 m; /* PLL_DDR clock factor */ + + sunxi_gpio_set_cfgpin(SUNXI_GPB(3), 0x7); + mdelay(5); + /* TODO: dig out what's them... some analog register? */ + if ((para->cas >> 3) & 0x1) + setbits_le32(SUNXI_PIO_BASE + 0x2c4, (0x1 << 23) | (0x20 << 17)); + + if (para->clk >= 144 && para->clk <= 180) + writel(0xaaa, SUNXI_PIO_BASE + 0x2c0); + if (para->clk >= 180) + writel(0xfff, SUNXI_PIO_BASE + 0x2c0); + + if (para->cas & BIT(4)) + writel(0xd1303333, &ccm->pll5_pattern_cfg); + else if (para->cas & BIT(5)) + writel(0xcce06666, &ccm->pll5_pattern_cfg); + else if (para->cas & BIT(6)) + writel(0xc8909999, &ccm->pll5_pattern_cfg); + else if (para->cas & BIT(7)) + writel(0xc440cccc, &ccm->pll5_pattern_cfg); + + if (para->clk <= 96) + m = 2; + else + m = 1; + + val = CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD | + CCM_PLL5_CTRL_N((para->clk * 2) / (24 / m)) | + CCM_PLL5_CTRL_K(1) | CCM_PLL5_CTRL_M(m); + if (para->cas & GENMASK(7, 4)) + val |= CCM_PLL5_CTRL_SIGMA_DELTA_EN; + writel(val, &ccm->pll5_cfg); + setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_UPD); + mctl_await_completion(&ccm->pll5_cfg, BIT(28), BIT(28)); + mdelay(5); + + setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_MCTL)); + clrbits_le32(&ccm->ahb_reset0_cfg, (1 << AHB_RESET_OFFSET_MCTL)); + udelay(50); + setbits_le32(&ccm->ahb_reset0_cfg, (1 << AHB_RESET_OFFSET_MCTL)); + + clrsetbits_le32(SUNXI_PIO_BASE + 0x2c4, (1 << 16), + ((para->sdr_ddr == DRAM_TYPE_DDR) << 16)); + + val = (SDR_T_CAS << 0) | (SDR_T_RAS << 3) | (SDR_T_RCD << 7) | + (SDR_T_RP << 10) | (SDR_T_WR << 13) | (SDR_T_RFC << 15) | + (SDR_T_XSR << 19) | (SDR_T_RC << 28); + writel(val, SUNXI_DRAMC_BASE + DRAM_STMG0R); + val = (SDR_T_INIT << 0) | (SDR_T_INIT_REF << 16) | (SDR_T_WTR << 20) | + (SDR_T_RRD << 22) | (SDR_T_XP << 25); + writel(val, SUNXI_DRAMC_BASE + DRAM_STMG1R); + dram_para_setup(para); + dram_check_type(para); + + clrsetbits_le32(SUNXI_PIO_BASE + 0x2c4, (1 << 16), + ((para->sdr_ddr == DRAM_TYPE_DDR) << 16)); + + dram_set_autofresh_cycle(para->clk); + dram_scan_readpipe(para); + dram_get_dram_size(para); + simple_dram_check(); +} + +unsigned long sunxi_dram_init(void) +{ + do_dram_init(&suniv_dram_para); + + return suniv_dram_para.size * 1024 * 1024; +} diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/mach-sunxi/timer.c similarity index 97% rename from arch/arm/cpu/armv7/sunxi/timer.c rename to arch/arm/mach-sunxi/timer.c index b758599636..fc9d419a25 100644 --- a/arch/arm/cpu/armv7/sunxi/timer.c +++ b/arch/arm/mach-sunxi/timer.c @@ -51,6 +51,7 @@ int timer_init(void) struct sunxi_timer_reg *timers = (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; + writel(TIMER_LOAD_VAL, &timer->inter); writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, &timer->ctl); @@ -58,15 +59,14 @@ int timer_init(void) return 0; } -/* timer without interrupts */ static ulong get_timer_masked(void) { /* current tick value */ ulong now = TICKS_TO_HZ(read_timer()); - if (now >= gd->arch.lastinc) /* normal (non rollover) */ + if (now >= gd->arch.lastinc) { /* normal (non rollover) */ gd->arch.tbl += (now - gd->arch.lastinc); - else { + } else { /* rollover */ gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - gd->arch.lastinc) + now; @@ -76,6 +76,7 @@ static ulong get_timer_masked(void) return gd->arch.tbl; } +/* timer without interrupts */ ulong get_timer(ulong base) { return get_timer_masked() - base; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 56a0ee3689..5a0b598a33 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -266,6 +266,11 @@ M: Icenowy Zheng S: Maintained F: configs/LicheePi_Zero_defconfig +LICHEEPI NANO BOARD +M: Icenowy Zheng +S: Maintained +F: configs/licheepi_nano_defconfig + LINKSPRITE-PCDUINO BOARD M: Zoltan Herpai S: Maintained diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 91463009b0..82c52b28f8 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -198,7 +198,7 @@ int board_init(void) gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); -#ifndef CONFIG_ARM64 +#if !defined(CONFIG_ARM64) && !defined(CONFIG_MACH_SUNIV) asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1)); debug("id_pfr1: 0x%08x\n", id_pfr1); /* Generic Timer Extension available? */ @@ -225,7 +225,7 @@ int board_init(void) #endif } } -#endif /* !CONFIG_ARM64 */ +#endif /* !CONFIG_ARM64 && !CONFIG_MACH_SUNIV */ ret = axp_gpio_init(); if (ret) diff --git a/boot/Kconfig b/boot/Kconfig index c8d5906cd3..b83a4e8400 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -362,9 +362,10 @@ config SYS_TEXT_BASE depends on HAVE_SYS_TEXT_BASE default 0x0 if POSITION_INDEPENDENT default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 - default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S - default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I - default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S + default 0x81700000 if MACH_SUNIV + default 0x2a000000 if MACH_SUN9I + default 0x42e00000 if MACH_SUN8I_V3S + default 0x4a000000 if ARCH_SUNXI hex "Text Base" help The address in memory that U-Boot will be running from, initially. diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig new file mode 100644 index 0000000000..ecec869d18 --- /dev/null +++ b/configs/licheepi_nano_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUNIV=y +CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_DRAM_CLK=156 +CONFIG_SYS_DCACHE_OFF=y +CONFIG_DRAM_ZQ=0 +# CONFIG_VIDEO_SUNXI is not set +CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano" +CONFIG_SPL=y diff --git a/include/configs/suniv.h b/include/configs/suniv.h new file mode 100644 index 0000000000..6118cd5e1a --- /dev/null +++ b/include/configs/suniv.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration settings for new Allwinner F-series (suniv) CPU + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Include common sunxi configuration where most the settings are + */ +#include + +#endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 7260eb72a4..4bab917c0b 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -22,7 +22,12 @@ /* Serial & console */ #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ +#ifdef CONFIG_MACH_SUNIV +/* suniv doesn't have apb2 and uart is connected to apb1 */ +#define CONFIG_SYS_NS16550_CLK 100000000 +#else #define CONFIG_SYS_NS16550_CLK 24000000 +#endif #ifndef CONFIG_DM_SERIAL # define CONFIG_SYS_NS16550_REG_SIZE -4 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE @@ -49,6 +54,15 @@ * since it needs to fit in with the other values. By also #defining it * we get warnings if the Kconfig value mismatches. */ #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 +#elif defined(CONFIG_MACH_SUNIV) +#define SDRAM_OFFSET(x) 0x8##x +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here + * since it needs to fit in with the other values. By also #defining it + * we get warnings if the Kconfig value mismatches. + */ +#define CONFIG_SPL_STACK_R_ADDR 0x81e00000 +#define CONFIG_SPL_BSS_START_ADDR 0x81f80000 #else #define SDRAM_OFFSET(x) 0x4##x #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -93,13 +107,9 @@ #endif /* mmc config */ -#ifdef CONFIG_MMC #define CONFIG_MMC_SUNXI_SLOT 0 -#endif #if defined(CONFIG_ENV_IS_IN_MMC) - -#ifdef CONFIG_ARM64 /* * This is actually (CONFIG_ENV_OFFSET - * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used @@ -109,7 +119,6 @@ #endif #define CONFIG_SYS_MMC_MAX_DEVICE 4 -#endif /* * Miscellaneous configurable options @@ -124,8 +133,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ -#define CONFIG_SPL_BOARD_LOAD_IMAGE - /* * We cannot use expressions here, because expressions won't be evaluated in * autoconf.mk. @@ -186,21 +193,7 @@ #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000)) -#else -/* - * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. - * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, - * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end. - */ -#ifndef CONFIG_MACH_SUN8I_V3S -#define BOOTM_SIZE __stringify(0xa000000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) -#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000)) -#else +#elif defined(CONFIG_MACH_SUN8I_V3S) /* * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, @@ -213,7 +206,34 @@ #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000)) -#endif + +#elif defined(CONFIG_MACH_SUNIV) +/* + * 32M RAM minus 1MB heap + 8MB for u-boot, stack, fb, etc. + * 8M uncompressed kernel, 4M compressed kernel, 512K fdt, + * 512K script, 512K pxe and the ramdisk at the end. + */ +#define BOOTM_SIZE __stringify(0x1700000) +#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0500000)) +#define FDT_ADDR_R __stringify(SDRAM_OFFSET(0C00000)) +#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(0C50000)) +#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(0D00000)) +#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(0D50000)) +#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(0D60000)) + +#else +/* + * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. + * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, + * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end. + */ +#define BOOTM_SIZE __stringify(0xa000000) +#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) +#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) +#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) +#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) +#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000)) +#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000)) #endif #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/include/dt-bindings/clock/suniv-ccu-f1c100s.h new file mode 100644 index 0000000000..f5ac155c9c --- /dev/null +++ b/include/dt-bindings/clock/suniv-ccu-f1c100s.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) + * + * Copyright (c) 2018 Icenowy Zheng + * + */ + +#ifndef _DT_BINDINGS_CLK_SUNIV_F1C100S_H_ +#define _DT_BINDINGS_CLK_SUNIV_F1C100S_H_ + +#define CLK_CPU 11 + +#define CLK_BUS_DMA 14 +#define CLK_BUS_MMC0 15 +#define CLK_BUS_MMC1 16 +#define CLK_BUS_DRAM 17 +#define CLK_BUS_SPI0 18 +#define CLK_BUS_SPI1 19 +#define CLK_BUS_OTG 20 +#define CLK_BUS_VE 21 +#define CLK_BUS_LCD 22 +#define CLK_BUS_DEINTERLACE 23 +#define CLK_BUS_CSI 24 +#define CLK_BUS_TVD 25 +#define CLK_BUS_TVE 26 +#define CLK_BUS_DE_BE 27 +#define CLK_BUS_DE_FE 28 +#define CLK_BUS_CODEC 29 +#define CLK_BUS_SPDIF 30 +#define CLK_BUS_IR 31 +#define CLK_BUS_RSB 32 +#define CLK_BUS_I2S0 33 +#define CLK_BUS_I2C0 34 +#define CLK_BUS_I2C1 35 +#define CLK_BUS_I2C2 36 +#define CLK_BUS_PIO 37 +#define CLK_BUS_UART0 38 +#define CLK_BUS_UART1 39 +#define CLK_BUS_UART2 40 + +#define CLK_MMC0 41 +#define CLK_MMC0_SAMPLE 42 +#define CLK_MMC0_OUTPUT 43 +#define CLK_MMC1 44 +#define CLK_MMC1_SAMPLE 45 +#define CLK_MMC1_OUTPUT 46 +#define CLK_I2S 47 +#define CLK_SPDIF 48 + +#define CLK_USB_PHY0 49 + +#define CLK_DRAM_VE 50 +#define CLK_DRAM_CSI 51 +#define CLK_DRAM_DEINTERLACE 52 +#define CLK_DRAM_TVD 53 +#define CLK_DRAM_DE_FE 54 +#define CLK_DRAM_DE_BE 55 + +#define CLK_DE_BE 56 +#define CLK_DE_FE 57 +#define CLK_TCON 58 +#define CLK_DEINTERLACE 59 +#define CLK_TVE2_CLK 60 +#define CLK_TVE1_CLK 61 +#define CLK_TVD 62 +#define CLK_CSI 63 +#define CLK_VE 64 +#define CLK_CODEC 65 +#define CLK_AVS 66 + +#endif diff --git a/include/dt-bindings/reset/suniv-ccu-f1c100s.h b/include/dt-bindings/reset/suniv-ccu-f1c100s.h new file mode 100644 index 0000000000..6a4b4385fe --- /dev/null +++ b/include/dt-bindings/reset/suniv-ccu-f1c100s.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) + * + * Copyright (C) 2018 Icenowy Zheng + * + */ + +#ifndef _DT_BINDINGS_RST_SUNIV_F1C100S_H_ +#define _DT_BINDINGS_RST_SUNIV_F1C100S_H_ + +#define RST_USB_PHY0 0 +#define RST_BUS_DMA 1 +#define RST_BUS_MMC0 2 +#define RST_BUS_MMC1 3 +#define RST_BUS_DRAM 4 +#define RST_BUS_SPI0 5 +#define RST_BUS_SPI1 6 +#define RST_BUS_OTG 7 +#define RST_BUS_VE 8 +#define RST_BUS_LCD 9 +#define RST_BUS_DEINTERLACE 10 +#define RST_BUS_CSI 11 +#define RST_BUS_TVD 12 +#define RST_BUS_TVE 13 +#define RST_BUS_DE_BE 14 +#define RST_BUS_DE_FE 15 +#define RST_BUS_CODEC 16 +#define RST_BUS_SPDIF 17 +#define RST_BUS_IR 18 +#define RST_BUS_RSB 19 +#define RST_BUS_I2S0 20 +#define RST_BUS_I2C0 21 +#define RST_BUS_I2C1 22 +#define RST_BUS_I2C2 23 +#define RST_BUS_UART0 24 +#define RST_BUS_UART1 25 +#define RST_BUS_UART2 26 + +#endif /* _DT_BINDINGS_RST_SUNIV_F1C100S_H_ */