configs: synquacer: Enable EFI capsule update support

Enable EFI capsule update support. With the EFI capsule update,
you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are
usually combined as a FIP binary, but if the binary is bigger
than 480KB, you have to modify FIP header, split the OP-TEE
and stores the OP-TEE binary in the different place. This
configuration supports both cases.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
This commit is contained in:
Masami Hiramatsu 2021-06-04 18:45:31 +09:00 committed by Tom Rini
parent 6ae303b62b
commit 3a37386f18
2 changed files with 23 additions and 0 deletions

View File

@ -110,3 +110,20 @@ CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
CONFIG_EFI_CAPSULE_ON_DISK=y
CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
CONFIG_EFI_CAPSULE_FIRMWARE=y
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
CONFIG_EFI_CAPSULE_FMP_HEADER=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_CMD_DFU=y
CONFIG_DFU_TFTP=y
CONFIG_DFU_MTD=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_DFU_SF_PART=y
CONFIG_FIT=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_ERASEENV=y

View File

@ -61,6 +61,11 @@
/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
/* #define CONFIG_SYS_PCI_64BIT 1 */
#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
"mtd nor1=u-boot.bin raw 200000 100000;" \
"fip.bin raw 180000 78000;" \
"optee.bin raw 500000 100000\0"
/* Distro boot settings */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_CMD_USB
@ -104,6 +109,7 @@
"ramdisk_addr_r=0xa0000000\0" \
"scriptaddr=0x88000000\0" \
"pxefile_addr_r=0x88100000\0" \
DEFAULT_DFU_ALT_INFO \
BOOTENV
#endif /* __CONFIG_H */